Aurora has updated to version 25, and the findbar was borked...

Similar Questions

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• When I downloaded the latest version of Firefox, the impression was so small I could read bvarely. What should I do to enlarge the characters without losing a bit of my toolbars...?

  When I downloaded the latest version of Firefox, the print was so small, I could barely read. What should I do to enlarge the characters without losing a bit of my toolbars...?

  == When I downloaded the latest version of Firefox, the print was so small I could read bvarely. What should I do to enlarge the characters without losing a bit of my toolbars...?

  print is too small

• Rundll32 was not able to load and the program was closed. Can't find anyway to fix my computer

  A lot of problems with Vista and Microsoft. Cannot find repair tools. Rundll32 won't charge or load inefficient and closed its doors.

  Hello
   
  We would like to get more information on this issue.

  1. do you get this error in the system startup or throwing or using any program?
  2. have you made changes on the computer recently?
  3. What is the full error message?
   
  "Rundll32 could not load and the program was closed," according to this error message, we assume that this error is related to a program. If you are aware of this program that calls this error message, uninstall and reinstall to fix this.

  If you do not know which program is causing the problem, follow all the steps mentioned in this link to find the culprit that is causing this problem and uninstall it.
  http://support.Microsoft.com/kb/929135
   
  NOTE: Follow step 7: reset the computer to start as usual.
   
  Post back with the results, so that we can better help you.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• I've just updated to version 10 and want to downgrade to version 9. None of my security software is compatible with 10. Where can I download version 9. Version 3.6, which is available on the Web site, is more than I want to go. Thank you.

  See the question

  _nat_

  You're better off with almost nothing accept ZA and Kaspersky, both are absolutely the worst security editors to keep in touch with updates of Firefox this last year: everyone has had at least one add-on Firefox being several weeks or months of delay on the schedule of release of Firefox. It's almost as if they don't know week 18 of Firefox development process and they are waiting until their Firefox users complain of their shit doesn't work don't not with a version new version of Firefox, before even to think to do their updates. IMO, the smartest thing is to test the version of channel every night (first alpha stage 6 weeks) for compatibility issues once a week to see what problems may exist with their software, and once the new version hits the channel Aurora (2nd week alpha stage 6) begin to develop a plan calendar for what they should be fixed and begin to repair their stuff, while intensifying to test a little. Once the new version Beta 6 weeks channel hits they should be completed their corrections and expand their tests to include the combination of the Add - most popular add-ons used by Firefox users so that they can see all problem users could hit and fix what needs to be fixed before the release of the new version of Firefox.

  Another thing these security vendors could do is some clients do their beta testing to find flaws and weak spots in their substance, as organizations open source like Mozilla done with Firefox. While I'm not a professional software, I have 3 different versions installed Nightly that I 'test' a little almost every day for simple things and the Aurora version, as well as the beta version. The last 6 or 7 years old, I found 3 or 4 pretty serious flaws that I have filed bug reports, of which one resulted in developers providing a warning much sterner on the risk of data loss and the other Bug reports helped developers by making them aware of a potential problem early enough in development that is was difficult to avoid the issue I pointed out to them with some minor coding changes.

  Free or paid version, if these security companies will create and distribute a Firefox Add-on is the right thing to do to keep to date with Firefox, or they should just interrupt the add-on and we stop around jerks with their irresponsibility and their nonchalant attitude towards Firefox. Honestly, I miss the "good old days" when these security companies ignored Firefox and only support Internet Explorer.

  I use Avira Personal Free - http://www.free-av.com/ - who does not feel the need to develop Add-ons for Firefox which really don't add anything to Firefox and only provide a 'bells and whistles' version of something that is already integrated into Firefox. Good solid anti-virus protection that is updated twice a day.

• After the "new version" download Java 6 times, my plugin check page indicates that he has disabled my 'version outdated' and asks me to upgrade. What do I do?

  Background:
  I had this problem for several months now. This problem started when an update came to Java on the Firefox Plugin check. Quickly, I installed the new update of Java. But the Firefox update register that I downloaded, even though I refreshed the page. So, I got rid of the old Java and downloaded again the new Java. When the page has continued to post the same message he had before, I downloaded a few times more. Finally, Firefox stopped to say that I was at day. Then a few weeks later perhaps I check Firefox Plugin, and on the page it says that I'm overwhelmed in Java. So I downloaded Java again. But Java was still in the list, with the red and said that he had to be updated. I restarted the computer. Then I restarted Firefox Mozilla with no Add-ons. When Java appeared still to be updated, I gave up and did not something more on this topic.
  Problem:
  Today, I decided to check my plugins. Java was not updating the list, and at the top a banner said, "Missing JAVA? For your security, Firefox has disabled your outdated version of Java. Please install the latest version. "I clicked on"upgrade to the latest version"and was brought to the Java page. I clicked on the download button. My cache indicates that it was this same Java plug-in (see background) download (6). I chose the re - download anyway. But Firefox always insists on the fact that I him have not downloaded.
  Question:
  Should I go to the control panel of Java and change something? I have to fix a few settings on Firefox? Should I disable Java entirely, delete all the files related to Java on my computer and start over with Java? What should I do?

  Try to use http://ninite.com/java/ninite.exe to install Java. Please note that even if download you it you have to double click it to run and install.

• Windows updates has shown installation but when checked 0kb installed and the icon was missing from the tray (Win XP sp3 IE6)

  original title: another missing Windows updates missing yellow icon (Win XP sp3 IE6)
   
  I'm having the same problem also.

  Windows XP sp3 with IE6. All updates applied excluding this last batch with the numbers you mention, except for two of them.

  I can tell you that, just as usual, the yellow icon was present when downloading these updates were. Then he disappeared after that that they have been fully downloaded.

  Interestingly, I went to Microsoft Update to check to see the new updates and found downloaded after checked for updates, BUT when I dropped down the details for them they all showed 0 KB!

  Here are the updates, that he sent to me (last

  Ko

  2559049

  2567680

  2566454

  2562937

  8900380

  2570222

  2536276

  and the MSE customer update kb 2544035.

  The only one who showed no 0Ko was a MS Security Essentials client update number kb2544035 with 7kb.

  I tested two updates from win xp to see if they would be set up and they did, here are the numbers... .kb8900380 and kb2567680

  kb8900380 is the edition of August 2011 of malware removal tool.

  I tested and found that it was actually installed and worked.

  Just one thing. I noticed on restart every time the yellow icon appears in the status bar but only flashes for a second or two, then

  disappears once more. I tried to quickly click on it but it does not.

  I then checked the taskbar customize notification and I found that it presents itself as an element of the past and said that it is associated with the download of updates.

  Syed N:

  Thanks for your suggestions.
  I wanted to post back to update everyone on my current situation.
  I was going to ask your manual correction of the WSUS... when I got home tonight. However, at the start of my PC tonight the Automatic Update icon (yellow) was actually download updates once more and things work like they are supposed to. After the download, the icon shows the balloon which informs you that you have updates available and when I clicked on the icon it was admissible and that it took me to the menu as usual at the.
  Then, I tested several updates in the menu of the AU and downloaded. They were installed properly and allow them left unchecked the icon stay in the tray as usual.
  I don't know what happened, but things are now correct.
  You have an overview on why things "fixed", I would be interested to know the why of it. !!!!!!! It is interesting to me.
  Maybe the MS is really followed this site and or you guys relay these flaws in MS for the correction.
  Thanks for your suggestions, I've forgotten to be able to reset the update components!
  Finally, Syed:
  If you can relay the suggestion to MS. I always liked Windows and like the superior ability I have to control aspects of it unlike OSX (Apple MAC) however the link low is a win (including 7) WIndows update mechanism. I was lucky for me and my family, I'm enough common sense to know how to apply updates to avoid the problems of the operating system, but not everyone has this education and too many times same own OS Win with very little in option programs/software and hardware drivers downloaded) have more up-to-date flaws then seems reasonable.
  I would like to see MS improve WSUS and also more importantly still provide and ENCOURAGE users to take and the advantage of teaching material that MS can offer users to consumers.
  PA bear:
  Also thank you for your suggestions. I didn't know that MSE is a culprit in this issue, but you never know.
  I have

• Update the office site in the browser edit, update all versions, mobile and Tablet?

  Don't update the desktop version of my site using Muse, in the edition, updated browser in all versions, Tablet and mobile too?

  This will depend on what you change with change in the browser. If you use the same content of synchronized text on the desk and phone of layouts, and then updates all instances of this content. Images and ordinary text frames are not related through page/layouts, so you must update each separately.

• Firefox has upgraded to version 33 and does not work at all. I open the browser and get a black screen and a dialog box titled "authorization required".

  The black screen a dialog box empty with "Authorization required" as its header.
  Using Windows 7 machine.
  Can't follow your troubleshooting routine as I can't open Firefox at all!

  based on what I've heard from other affected users I'm going to guess you have a built-in hd3000 graphics card intel on your system and the outdated drivers for it.
  If this is the case, please perform a driver update: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764

• Windows Vista updates suddenly stopped working and the message appears to me to be the victim of pirated software - error: 0x80070426

  Message came that said my copy of Vista can be victim of piracy and go online to validate that, I did it because I have been using this OS for more than 3 years on a Toshiba laptop with Windows Vista Home Premium 32-bit p2000 series. a few hours later my computer said it needed to restart and once it restarted it has a black screen with a message that he was trying to repair. It could not be repaired so he asked if ok to go to a restore point and clicked on Yes. I get the message that my copy is not genuine and my computer wants to restart once again, but I'm the delay of four hours. I did the command line to try to restart the service and access has been denied. 0x80070426. I found an ad on the forum and tried the steps there, but he failed. Mistake was 54. http://social.Microsoft.com/forums/en-us/genuinevista/thread/de089d6e-63b4-4D6E-b955-30bb8e9525d3. I had to contact support and have been waiting for more than 24 hours for assistance. My Control Panel opens and goes away, but I could remove tweetdeck which is among the most recent installations of software I did before this all happened. I am also running xampp on my desktop and I tried to put in place a virtual host by using a different port - could not get that to work and changed the host to the original file. Could it be the problem? I hope I did not reinstall my OS and destroy my computer :-(I also ran Microsofts diagnostic tool and write it here:

  Diagnostic report (1.9.0006.1):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0
  Validation code online: 0x80070426
  Cached Validation code: n/a, hr = 0x80070426
  Windows product key: *-* - JQMWD - 2QJRJ-RJ34F
  The Windows Product Key hash: R8gPTEFMoOygFewoq/uOoWMpz68 =
  Windows product ID: 89578-OEM-7332157-00237
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6001.2.00010300.1.0.003
  ID: {E57BD23E-724F-49E7-ACE4-57DC9E2AB49E} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6001.vistasp1_gdr.090302 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  WGATray.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E57BD23E-724F-49E7-ACE4-57DC9E2AB49E}1.9.0006.16.0.6001.2.00010300.1.0.003x 32*-*-*-*-RJ34F89578-OEM-7332157-002372S-1-5-21-3871005671-4011101567-1094615180TOSHIBASatellite P205DTOSHIBAV1.0020070814000000.000000 + 00081333507018400FE04090409Time(GMT-08:00) Standard Pacific03TOSCPLTOSCPL00100100Microsoft Office home and Student 2007126B5697EF2510F1AMwy5C4A7Uv VTGRBwWVjHvNqHks plus 81602-909-4685496-68058 1

  Content Spsys.log: 0 x 80070002

  License data-->
  Software Licensing service is not working.

  --> HWID data
  Current HWID hash: NgAAAAEABAABAAEAAQABAAAAAwABAAEA6GGqskaeSvGGg5CmuJF0htam8vSSKt4YXv6sVniq

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP TOSCPL herring
  HPET PTLTD HPETTBL
  MCFG MCFG PTLTD
  TCPA TOSCPL
  SLIC TOSCPL TOSCPL00
  SSDT PTLTD POWERNOW
  ASF!               DMA AMDTBL

  Thanks for any help!

  ebflute

  Hello Ebflute,

  I suggest that you perform a repair installation.

  Repair facility:

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this still does not resolve all problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) (if this is not successful.)

  <><><><><><><><><><><><>

  Please make sure that you back up all the important data before you continue. Please visit: methods for your backup files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• Failure of KB967912 Windows Vista updated 10 x today and the computer can't access internet

  My new ACER Vista Office tried to install this update 10 x, today. It started while I was working this afternoon. Until that moment, I had a complete connectivity via a cable CAT5e LAN accessing a router and cable modem. Later, I lost the first internet and local network access. Before that, I had worked with Firefox, Windows Media, and financial software and everything was accessed successfully the ' net. Then, I tried to configure Microsoft Outlook 2007 to get my email. His inability to access my cable provider was the first idea I had that I didn't have connectivity.

  Each time, I had the exclamation point on the stop switch and Vista stops with the view that he was installing "Update 1 of 1. However, whenever I rebooted the update didn't install.  Also, I had to restart my modem and router every time to regain access to the internet for short periods of time; in less than 4 to 7 minutes, all access to the internet is lost again. The error code was Code BC2 the last couple of times, but before that I also got error Code 80200053 when an Office update also failed to install. (I was able to install the Office update successfully, after another restart and cycle the modem to regain power connectivity).

  Help! FYI, I had to find another computer even to post this question!

  Ann

  Hi AnnFr,

  Thanks for posting the question.

  The KB967912 refers to the essentials automatic updates. A workaround for this problem is uninstall all MSN "stuff", resettlement using the latest version, which includes this update.

  To download the latest version visit this site:
  http://download.live.com/

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Automatic update of version 16 and 17 does not

  Hello

  We have auto silent for flash updates on our laptops. He worked for previous versions of 16. We are currently on 16.0.0.305. Our users are now invited to be updated since 17 is available. It is not silent auto update from 16 to 17, however. You have to do a new installation of 17 and then the silent update works again for the next versions of 17? If so, this isn't a very good way to make it work. It looks like it should be transparent and maintain even with version changes.

  Any help is appreciated, thanks!

  Hello

  During strong releases, users will subsequently receive an update notification to update because there is no way to disable the Notification updates, even when opted in the background updates, unless you host them background update of resources locally.  Since you have Flash Player license and use auto-updated silent, I recommend this option.  Should be a bit of work on your side, to set up the server and get the resources and deploy whenever there is a version, but it would also ensure that your users are updated timely during these strong releases. More information on substantive hosting updated locally is in the Administrator's Guide in Chapter 3, page 20 (substantive updates to an internal server).

  --

  Maria