Authentic Windows problems
So I have a genuine Windows 7 Ultimate which came with my Dell XPS 15z (purchased directly from Dell). My problems started a few weeks ago, when an update of windows seems not to have installed correctly. I regularly get pop-up messages telling me that my windows is "not authentic". I downloaded the Microsoft legitcheck.hta program, which tells me that the only solution is to buy another copy of Windows. I have Windows free keys at my University, however, but the instructions to find out where to enter tells them to go to computer-> properties and select "activate windows". But here, it says "Windows is activated"! It seems that my Windows is caught in a limbo where it cannot decide whether it is authentic or not... I uninstall the update failed, but it did not help.
Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012
Have you installed a new hardware or software since you started facing this problem?
Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.
What Antivirus utility you installed?
What's your date and time correct?
Also:
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
then
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannow
This will check for any breach of integrity
Restart your system
You can also try to do a system restore before you start experiencing this problem:
How to use System Restore in Windows 7 [easy, 5-10 Min]
Tags: Windows
Similar Questions
-
Not authentic "Windows" problem
Story: My Dell Inspiron laptop has been running Windows Vista when initially purchased in 2009. Dell has provided a free upgrade to Windows 7, and this upgrade went well several years ago. Thus, the machine has been works well on Windows 7 Home Premium Service Pack 1 for awhile.Don't know if this is important: a couple of months, I replaced the hard drive. I did a backup/restore image for the operating system on the new drive. I don't think that I was invited to return keys validation of Windows at this time here. I had no problem and the machine worked well after the replacement of the hard disk.Now, all of a sudden I get a pop up window that says "this computer is not running genuine Windows.However, my Windows is genuine!I tried to solve the problem by installing the WindowsActivationUpdate.exe, but will not install. I get the error message "update installation failed. Information about the error - 0xC8000247I tried to get the Windows product key (from the sticker on the bottom of the laptop) via Control Panel/system/change the product key but it says invalid key!Something is clogged to the top, but I don't know what.Thanks for any help you can provide.Thank you for your response. I tried several related suggestions and more did not help. That seems to have solved my problem of Windows Update is reinstalling the technology Intel Rapid Storage Technology driver as suggested by george1009 in your third link above.
As for my Activation of Windows problem, I typed in the wrong product key. I entered the key on the sticker on the computer, but it is valid only for Windows Vista (original OS), but not for Windows 7 (current operating system). I found that my Windows 7 upgrade disk envelope and who had the key valid on it.Thanks again for your help. -
Friend upgrade XP to windows 7. not authentic Windows message receipt. Buy Windows 7 and downloaded to "fix the problem". Computer crashed, but I got a new drive. Should I try install
Hello
So the Windows 7 machine is fine, but its also empty! That we can help you. The XP machine is another matter. If you want to upgrade these machines to Windows 7, and the minimum hardware requirement is met, you can buy discs of software of Windows 7 operating system for each machine (1 motherboard = 1 license for purchased software).
In addition, I highly recommend you reformat two machines for them to XP RID completely, not to mention viruses / malware. If you plan to update the two XP machines with own versions of XP, that's fine, but this isn't the forum for this, the Windows XP forum would be the place, go here: http://answers.microsoft.com/en-us/windows/forum/windows_xp?tab=QnA .
Thus, the machine to Windows 7. To take no chances. Allows to run several scans on the new machine. You said "didn't work any more", I suppose you can't start Windows, ways to correct? If so, the answer is a program you burn on a CD called BootMed; Download 64-bit here: http://download.cnet.com/BootMed-64Bit/3000-2094_4-75450831.html and the 32-bit version from here: http://download.cnet.com/BootMed/3000-2094_4-75448200.html (only use the Direct download link).
Once downloaded, burn it to a CD, load this CD in Windows 7 computer and ensure that the CD drive is the first boot device, restart the computer. This will load a modified version of Ubuntu on your system, which includes antivirus and anti-malware programs. Run and remove anything they find. When they have finished their trial scans restarting the computer without the CD installed. What happens now?
Post your results here and let me know how you fare.
Kind regards
BearPup
-
construction of not authentic Windows 7601 error
I have not authentic windows build 7601 error and I tried MGADia.exe but it won't let me copy the report. I get an access denied error message. Even when I run slui.exe can help you to clear the message not authentic? Thank you.
Hello
The problem can be solved by recreating the license store.
Perform the steps suggested by George1009 from the link below and check if it works.
Answer please if you have any questions.
-
Build 7601, not authentic Windows. Can I change OEM Retail?
Windows 7 Home premium OEM worked very well on my PC at home built for 6 months or more. Then I started getting warnings that the version is not authentic. I bought the software from a reputable supplier and I thought that you had to use OEM on a new PC. I did research as much as I can on the subject, but I am reluctant to pay again for a commercial version. Can't understand why MS would allow sales OEM versions to the public if they can only be used by certified computer manufacturers? Is there something I can do? I don't mind paying a small fee if I committed a mistake, but not the entire cost.
License data-->
C:\Windows\system32\slmgr.vbs(1333, 5) (null): these data are incorrect.
Your Windows problem seems to be due to a problem with the license store...
Re-create the license store
1) click the Start button.
(2) type: CMD.exe in the field "search programs and files".
(3) right click on CMD.exe and select run as administrator
(4) type: net stop sppsvc (it may ask you if you're sure, select Yes)
Note: the Software Protection service may not be running, that's ok.
(5) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
(6) type: Rename tokens.bar tokens.dat
(7) type: cd %windir%\system32
(8) type: net start sppsvc
(9) type: slui.exe
(10) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can occur automatically.
Reboot, then run again MGADiag and post the report
-
vCenter 4 &; SQL with authentication Windows - errors in the event log
I worked on a new installation of SQL 2005 & vCenter 4 and chose to follow the guidelines of good practice and have the configuration of authentication Windows for the DSN and vCenter services. After a few small problems, I have everything works fine, however there are a lot of Application events generated on SQL Server as follows:
Event type: Failure Audit
Event source: MSSQLSERVER
Event category: (4)
Event ID: 18456
Date: 10/20/2009
Time: 14:17:48
User: NT AUTHORITY\ANONYMOUS LOGON
Computer: SQL03
Description:
Failed to connect to the user 'NT AUTHORITY\ANONYMOUS LOGON'. CUSTOMER: x.x.x.x
For more information, see Help and Support Center at http://go.Microsoft.com/fwlink/events.asp .
Data:
0000: 18 48 00 00 0e 00 00 00
0008: 00 00 00 44 00 43 00 0D
0010: 53 00 56 00 50 00 57 00
0018: 00 53 00 51 00 4 c 00 4 d
0020: 30 00 33 00 00 00 07 00
0028: 00 00 6 D 00 61 00 73 00... m.a.s.
0030: 74 00 65 00 72 00 00 00 t.e.r...
It does not appear to pose any real problems, but I don't want my fill with these Application event logs and ideally I want to go to the bottom of him so I know nothings actually bad before it prepares for production.
I know that this was a mistake that has been received (similar in any case) when you don't have your SQL Server set to mixed authentication & attempted to use SQL to your DSN account, but do not know what it is now.
Any help appreciated.
Doug.
OK - managed to solve my problem by solving another...
Noticed that graphs of Performance seen in vCenter threw an error - restarted the Management Services Web service on the server vCenter vCenter, solved the graphics Perf error and stopped SQL event logs generated too.
Doug.
-
I received a call from the
saying that they would help my dose of my windows problems. Is it a scam? Hello
They are cold, you try to pick up the 'business' calling
It's a scam.
Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.
You are the only person who knows if you gave them remote access.
If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.
If you use your online credit card, cancel and get a new one issued to you.
And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And Microsoft does not contact you unless YOU have made prior arrangements with them to do.
There is an article in the link I'm you provide at the end of this one
Read this Information from Microsoft:
"Avoid scams to phone for tech support.
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
Don't be fooled of unsolicited calls. Don't provide personal information.
Here are some of the organizations that cyber criminals claim to come:
Helpdesk Windows
Windows repair center
Microsoft technical support
Microsoft technical support
Windows Support Group Technical Department
Microsoft Research and Development Team (team of Microsoft R & D)
See you soon.
-
Missing programs, perhaps a Windows problem
I was working on my computer very well, I've been on the internet for hours without problem (no antivirus warning and I wasn't downloading anything, only normal pages), and I have existing, up-to-date antivirus.
Well, the problem is that most of my installed programs have just "party" and some standard Windows programs are gone too. Programs, I had on my system for years and have used several times without problem simply disappeared as well as programs such as calculator and paint. Well, they are the programs that I realized that I have lost so far. To give you an idea, go to start, programs, and usually 1 columns 3/4 programs are displayed, it is now maybe 2/3 of a column. When you go into program files, there is nothing in the missing programs, it seems that they have been uninstalled.
I have done a complete analysis of the system through Norton Antivirus and came up with nothing. I restarted and then a box come to say a word about "Windows is unable to complete the program installation..." something in this direction, and nothing has come on my desktop except for the desktop, My Documents and trash. I did a restore of the system at the point of older, two weeks ago, and it came up saying: "we cannot complete the system restore, no change has been made." Arghh!
I'm computer literate and worked a bit in the it helpdesk and I have absolutely no idea. I think since this is a Windows problem that we may have to clean this completely and started from scratch with new windows. I you gave as the screenshots I can, to maybe give you an idea of what is happening. Note on the last note of screenshot that there are a few things has highlighted. I did not do that, then maybe it's the question? This is the "InstallShield Installation information", "Uninstall information", and "windows update". Also, I am happy to install Real VNC if that helps diagnose the problem. Can you please guide me the case, before you go to all this effort?
Thanks in advance.
Run this tool to remove the flags hidden files and folders and see if that's it, it's.
http://download.bleepingcomputer.com/grinler/Unhide.exeSee also this article on the thieves hidden files and desktop rmeoved shortcuts and programs startmenu shortcuts in the folder temp\smtmp.
Missing desktop icons - program files empty
http://www.experts-exchange.com/A_6209.html -
iPod touch recognized as a digital camera, apple says it's a windows problem
iPod touch is recognized as a problem digital camera.the says it's a windows problem...
Hi cuteshey,
Welcome on the site of Microsoft Windows Vista Community.
Solution 1: Update the drivers
(1) the Device Manager open, either by right clicking on computer and then click on manage, and finally on Device Manager, or by typing devmgmt.msc in the box then find (or run) on the bottom of the start menu and press ENTER.
(2) find the ipod, he (should) be listed under digital cameras, right click it and choose "update driver software".
(3) select "Browse my computer for driver software".
(4) for the location (you must have already installed itunes) use C:\Program Files\Common Apple Mobile Device Support\Drivers (replace C: for what is the letter of your system drive), and then click Next, windows will find the driver here and continue to update the driver
(5) after the update is complete, click Finish to close the dialog box, then disconnect the ipod and plug it in again.Solution 2: This seems to be a known issue with the iPhone and iPod touch from Apple, I would suggest also allows you to check the link that contains the iPhone and iPod touch: Disabling digital camera notification in Windows Vista
http://support.apple.com/kb/TS1500.
Juice to ensure that it is not not a Windows problem check the Apple Support Article: iPhone and iPod touch: disable the notification of digital camera on Mac OS X
http://support.Apple.com/kb/TS1501
Announcement: Camera, video and photos: answers to frequently asked Questions
http://discussions.Apple.com/Ann.jspa?annID=779
Solution 3: If the issue is not resolved, it is recommended to contact Apple for iPod Touch http://www.apple.com/support/ipodtouch to have the best support or you can reach the Dell Forums: http://discussions.apple.com and check for extra support and check if they have new updates on this issue and if they can help fix the same.
Let me know if that does or does not work. Good luck!
Hope it will be useful.
Thank you and best regards,
Kadoch - Microsoft Support
Visit our Microsoft Answers Feedback Forum and tell us what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Windows Installer + VSS + Windows problems in Windows 7 SP1 Activation
I used this Windows 7 machine for 5 years now and has recently encountered several problems, which probably are closely linked:
1. Windows installation problem
Can't update programs, although new install if they do need Windows Installer to do. Most but not all Windows not updates install.2. the problem of volume shadow copy Service
Failed to create system restore points. With VSS errors appear when I try to do. No previous restore point is available.
3. Activation of Windows problem
A pop up keeps appearing every 1 or 2 hours, saying that my computer is not running genuine Windows. Obviously nonsense since this PC was bought during the original Service Pack 1 of Windows 7 and I've never had a problem before.I searched a lot online to solve all these problems. I tried hundreds of possible solutions, but nothing has worked. I think that it is all caused by the same thing, but I am unable to find it.
Ready to provide more information. Thanks in advance.
(PS: my camera has a pre installed Windows 7 so I own not a Windows DVD, don't want to reinstall the OS, prefer to try to find the cause of the mess)
Do you have same problems if you create a new user account?
What Antivirus utility you installed?
Have you installed a new hardware or software or both since you started these problems?
Could you describe some of the thing things you've tried?
Start by checking your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
then
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
You can also try to perform a repair upgrade to see if it works. You need to download a copy of the edition of so that your system is under license:
Download Windows 10, 8, 7 ISOs
https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-ISO-download-tool
then
-
authentication window appear does not correctly
Authentication popup window does not display the buttons to send or cancel submission of credentials. Keyboard still works, but the pop-up window is the frame is smaller than the content of the window.
This is probably caused by the additional content that is added by LastPass extensions and AutoFill that do not fit in the authentication window.
On Linux, I am able to resize this window in the usual way by dragging its highlight.
-
Authentication (Windows Server 2013) AD Cisco ISE problem
Background:
Has deployed two Cisco ISE 1.1.3. ISE will be used to authenticate users wireless access admin WLC and switches. Database backend is Microsoft running on Windows Server 2012 AD. Existing Cisco ACS 4.2 still running and authenticate users. There are two Cisco WLCs version 7.2.111.3.
Wireless users authenticates to AD, through works of GBA 4.2. Access admin WLC and switches to the announcement through ISE works. Authentication with PEAP-MSCHAPv2 access and admin PAP/ASCII wireless.
Problem:
Wireless users cannot authenticate to the announcement through ISE. This is the error message '11051 RADIUS packet contains invalid state attribute' & '24444 Active Directory failed because of an error that is not specified in the ISE'.
Conducted a detailed test of the AD of the ISE. The test was a success and the result seems fine except for the below:
xxdc01.XX.com (10.21.3.1)
Ping: 0 Mins Ago
Status: down
xxdc02.XX.com (10.21.3.2)
Ping: 0 Mins Ago
Status: down
xxdc01.XX.com
Last success: Thu Jan 1 10:00 1970
March 11 failure: read 11:18:04 2013
Success: 0
Chess: 11006
xxdc02.XX.com
Last success: Fri Mar 11 09:43:31 2013
March 11 failure: read 11:18:04 2013
Success: 25
Chess: 11006
Domain controller: xxdc02.xx.com:389
Domain controller type: unknown functional level DC: 5
Domain name: xx.COM
IsGlobalCatalogReady: TRUE
DomainFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
ForestFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Action taken:
Log Cisco ISE and WLC by using the credentials of the AD. This excludes the connection AD, clock and AAA shared secret as the problem.
(2) wireless authentication tested using EAP-FAST, but same problem occurs.
(3) detailed error message shows below. This excludes any authentication and authorization policies. Even before hitting the authentication policy, the AD search fails.
12304 extract EAP-response containing PEAP stimulus / response
11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated
Evaluate the politics of identity
15006 set default mapping rule
15013 selected identity Store - AD1
24430 Authenticating user in Active Directory
24444 active Directory operation failed because of an error that is not specified in the ISE
(4) enabled the registration of debugging AD and had a look at the logging. Nothing significant, and no clue about the problem.
(5) wireless tested on different mobile phones with the same error and laptos
(6) delete and add new customer/features of AAA Cisco ISE and WLC
(7) ISE services restarted
(8) join domain on Cisco ISE
(9) notes of verified version of ISE 1.1.3 and WLC 7.2.111.3 for any open caveats. Find anything related to this problem.
10) there are two ISE and two deployed WLC. Tested a different combination of ISE1 to WLC1, ISE1 to WLC2, etc. This excludes a hardware problem of WLC.
Other possibilities/action:
1) test it on another version WLC. Will have to wait for approval of the failure to upgrade the WLC software.
(2) incompatibility between Cisco ISE and AD running on Microsoft Windows Server 2012
Did he experienced something similar to have ideas on why what is happening?
Thank you.
Update:
(1) built an another Cisco ISE 1.1.3 sever in another data center that uses the same domain but other domain controller. Thai domain controller running Windows Server 2008. This work and successful authentication.
(2) my colleague tested in a lab environment Cisco ISE 1.1.2 with Windows Server 2012. He has had the same problem as described.
This leads me to think that there is a compatibility issue of Cisco ISE with Windows Server 2012.
Yes, it seems that 1.1.3 doesn't support Server 2012 as of yet.
External identity Source OS/Version
Microsoft Windows Active Directory 2003 R2 32-bit and 64-bit
Active Directory Microsoft Windows 2008 32-bit and 64-bit
Microsoft Windows Active Directory 2008 R2 64-bit only
Microsoft Windows Active Directory 2003 32-bit only
http://www.Cisco.com/en/us/docs/security/ISE/1.1/compatibility/ise_sdt.PDF
-
problem with authentication windows 7 after formatting hard drive
I formatted my hard drive and you need to reinstall windows 7, I used the same activation code that microsoft sent me when I bought digitally windows 7. Shouldn't that I be able to authenticate with the code, since it is the same computer?
Try the phone activation:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usHowever, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
I recently moved fron to the United States, to the Mexico, after my computer connected to the internet now I get a message the windows xp Pro copy on my computer is not authentic to used in the field I'm located... never had a problem bofore, any ideas
Hello
This happens when you move from one place to another, I suggest you to reactivate your copy of Windows XP through activation of the phone. Follow the steps mentioned below.
How to activate Windows XP by phone
To contact a Microsoft customer service representative to activate Windows by phone, follow these steps:a. click "Start", point to "All programs", "Accessories", "System Tools" and then click "activate Windows".
Or,
Click on the Activation of Windows icon in the notification area (aka system Tray).
Or,
By clicking on the Start button, click Run, and then type in "oobe/msoobe / a", then press the Enter key on your keyboard.a. click Yes, I want to telephone a representative of active windows customer service now.
b. follow the steps to activate Windows by phone dialog box and then click Next.
c. When activation is complete and you receive the following message appears, click OK.
"You have activated your copy of Windows.How to activate Windows XP
http://support.Microsoft.com/kb/307890/en-us
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Activation of Windows problem just popped up
Help... I have a Compaq Presario Desktop PC SR5710F March 2009 that worked very well.
It has Window Vista Home Premium Service Pack 2.
Unexpectedly, in the lower right corner, he says now Windows Vista (TM) Build 6002 this copy of Windows is not genuine
In Control Panel-> system Panel, at the bottom, it has a section of Windows Activation.
You must activate today. Activate windows now.
Product ID: XXXXX-OEM-XXXXXXX-XXXXX and change product key
When we choose the "activate now", you get another jump to the top of table.
Product key Windows Vista family premium you typed is invalid for activation
and he gives three choices:
- Buy a new product key online
- Type a different product key
- contact the HP company to help solve this problem (tried, but the system is out of warranty)
Don't know what happened and why... Can not find the package of the system with an activation key CD (might not come with one, honestly don't remember as far behind). I don't want to do a full restore from the hard drive and go back to square 1. and do not want to buy another license of Vista for a burp of system.
Any Suggestions?... Is it possible to contact HP on an output of the guarantee system for something like this addressed.
Hello
The unit does not include windows cd or DVD.
Check if you have the sticker COST of windows on the chassis of the device, and then try to enter this product key.
Have you tried to contact Microsoft and give them your key? See if you can get in touch with them.
Let me know if you have the Certification of the authenticity of the COA for windows and if you were able to type the key.
Thank you
Maybe you are looking for
-
When I search in the address bar, it clears
When I type in the words to search for in the search bar, the words disappear and nothing happens. I can't do a search at all when I type the words, however, when I click on one of my favorites, that there is no problem that goes online to the bookma
-
How can see / find music and movies in my iMac? Pls see screenshot
-
Re: update type Intel Management Engine Interface
Simply receive uprgade notes... * heci - 20150320101654.zip *.Data di ultima changes 20/03/15Ragione social IntelType Intel Management Engine Interface Whatever it is, what to do? It is necessary? It is safe?Thank youGiovanni
-
10.11.3-click command does not
After the update to 10.11.3 command click doesn't work anymore in the finder and other applications, I rebooted but still no functionality.
-
Control and simulation and data acquisition
Hello I am applying to motor control in Labview. I'm sampling speed from DC engine in real time through an acquisition of data. (my sampling time is 1000 samples per second) Then wrap speed as input to a Simulation (simulation and design of the order