Auto issues

Similar Questions

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• Issue of auto brightness

  If on my Macbook Pro, the auto brightness turned on, what happens if I change it manually with the cursor (while the auto brightness is always checked/enabled)?  -What changes the Auto brightness calibration in the future?  Alternatively, he revert to the some internal calculation over time?

  No effect, you're good.

• SCREEN AUTO IMAGE ROTATION ISSUE

  Recently, the auto-roate has stopped working. In settings, I checked that the feature "auto rotation" was checked. I even disabled and double-checked the feature without success.

  Then, when I turn the phone 90 degrees the content of the screen not to shift and expand.

  I checked that the auto rotation function does not work with photos, e-mail text, browser, etc.

  Please let know us on what steps I have to use to correct the problem

  Me fixed... rebooted the phone everything better

• issue of "auto-fill".

  A few years back, as part of Mac OS X, there is a feature in which you can configure a typed command, say "99" which would be a phrase or an expression of type auto".

  Now, I want to remove this "auto-fill" that is in the Mail, Safari, etc..

  Substitution of text?

  System Preferences > keyboard > text

  Select the entry in the list, and then click the button "-" at the bottom.

  

• E4200 Auto Connect issue

  Since upgrading my router for an E4200 E3000, I have car issues connect with my MacBook Pro.  I don't know if it is a computer or router problem.  Here's what happens:

  1. the computer is wireless on E4200.

  2. close your laptop lid

  3 re - open the cover and wait for a Wi - Fi connection to restore.

  4. computer does not automatically reconnect to the internet

  5. I reconnect my connection manually.

  Note: My password is saved and doesn't have to be re-admitted every time.

  Solved my problem... Mac OS.

  I deleted all my wireless networks recorded and manually added my house e4200 network.

  Everything has been fixed.

• Issue of auto contrast of brightness

  There is problem with auto brightness with my compact z5 last firmware.200 running. When it is turned on the contrast of the colors is really terrible. The colors are not so 'realistic', are not the same, while the auto brightness is disabled.

  Hi @mrnino,

  Have a look at this topic, is similar to what you live?

• Issue of driver auto dial

  I'm running X2.3 conductor and VCS X8.1.1, and I ran into a problem with the auto-numbering feature.  Below is a brief description of how I feel:

  For example, I have an alias of the meeting, [email protected] / * /, which is configured with an automatic line [email protected] / * /.  All the rules of research are correct that an external endpoint can connect to [email protected] / * /, and in the event of conductor log, I see an entry to call [email protected] / * /.  But [email protected] / * / is not connected to the Conference.  After reviewing the microcontroller is in the Conference, I see a call to try a very long alphanumeric URI with the address of management listed instead of [email protected] / * /.

  I deleted the configurations and re-created from scratch, but still the same results.  I have disabled HTTPS to see if that would help matters, but no joy.  So now I'm back setting up vanilla and post here in case someone else has experienced this problem and can provide advice.

  Hello Cristian-

  TLS is required as shown in the conductor deployment guide for every piece of infrastructure.

  • MCU on pg 16.
  • TP server on pg 20.
  • VCS on pg 22.
  • Conductor on pg 31.

• Auto generated issue of vanity

  Hi all

  I have a problem with vanity URL:

  First of all, I had created a model for an assettype and when I edited an asset, the URL has been generated correctly, so, I published the assets of the following environment...

  The problem came when I edited the published again active, it changes its vanity URL of self-generated NOT auto generated, so I lose the model id...

  Do you know what's happening?

  Thanks in advance!

  Hello Elena,

  When you publish an autogenerated asset with a vanity URL (for example with patter / ${name} .html), and then you change the asset (say that you change the name), the old URL becomes a manual URL and you get a new auto-generated URL.

  The old URL becomes manual so that you can decide whether to keep, delete or change to redirect to the new URL or elsewhere.

  If you change the asset and the new URL is the same, the old URL becomes even a manual URL, but the new auto-generated URL not created (because it already exists in the manual). It is the expected behavior.

  To retrieve the URL generated automatically, you can remove the manual URL and re-save the assets.

  Kind regards

  Stephan.

• Issue Sony vio pro 13 auto brightness and sleep

  After the last update of the bios, if you autobrightness and the computer goes to sleep.  When the computer wakes you will not be able to adjust the brightness and more.  On display for the brightness adjustment screen always appears when you use the function keys, but the brightness is maintained at a level quite blurred.  If you have the off auto brightness, you can always adjust the brightness after the computer wakes up.  Maybe it's a bug in the latest version of the bios?

  Hello.  My laptop is a SVP13217PH.  I tried looking for an updated driver, but there are none.  I also tried uninstall and then reinstall the drivers and the hot key utility again, but the result remains the same.

• 10.10.5 slow transformation after 13/09/16 auto updates installed! 20 min. to get this issue out! Any ideas?

  Ver.10.10.5 OS X Yosemite

  Updates to OS X Yosemite Ver.10.10.5 months made me back with an operating system that now the overloads of the processor with "out of memory of the application' opinion arise within the App to leave forced.  Just type this memory marked a step back to the old 286 days of treatment of 30 years, despite only active application!

  Any suggestions?  It seems as if underlying activity runs as hard as he can in circles endlessly, or as his attempt to sync with something permanently, but I run operations synchronization of any kind. I have 80GB free (250 GB) HD, 4 GB of DDR3 memory.

  Is there a diagnosis I can run to identify all actions through the processor. How can I identify what is eating a lot of time processor?

  It has been suggested that recharge Yosemite OS X.  Until this is resolved, the thought of this attempt at this speed of CPU is overwhelming and could dig a deeper hole to get out of. In addition, he was works perfectly until what updates of last month.

  Would appreciate any other suggestions

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Photosmart 7520 Auto-duplex pirnting issues

  I have a photosmart printer 7520 with printing. It is installed on a windows 7.

  When I try to print documents using automatic duplex printing, is it a way I can change the course of the back of the page, I try to print folding brochures and the back of my pages are backward. I can't find any setting to change the course of the back of the pages so that I can bend my books and read from page 1 to page whatsoever, without having to put the book backwards and turn the pages.

  Any help would be greatly appreciated

  Hello! Welcome to the @mflammger forums.

  I read on how you are looking for information about brochure printing. The link below can help you with the settings.

  Re: problems with printing booklet with smart Photo 7520

  I hope that helps!

  See you soon!

• Auto-Fill issue

  Hi all!

  I don't know if this is possible:

  I have a multipage form and asked me if it was possible to have the information from a page to fill in the designated fields same on another page (or multiple pages). I watched videos on duplicate fields but they all seem to put the same field duplicate in the same position on several pages. The complexity of these forms is information in different places from one page to another.

  Is it possible to have the information to be reported on different places on different pages?

  You must move the fields in the other pages if necessary.

• Issue of auto-start

  Hello

  In our system, we automatically start two virtual machines in a specific order. So my question is, if I simply set the order of 1 and 2 under the parameters of Autostart with little or no time delay, the second power of the virtual machine once is first actually powering, or will it start turning on after the first start of power?

  I guess that, basically, I wonder when a second VM starts power compared to the first VM. (I just want if ensure that the first virtual machine has enough time to complete the power before the beginning of the second).

  Thanks for the help!

  Hello and welcome to the communities.

  So my question is, if I simply set the order of 1 and 2 under the parameters of Autostart with little or no time delay, the second power of the virtual machine once is first actually powering, or will it start turning on after the first start of power?

  The delay time allows you to control the time between the turn on/off the virtual machines. The only way you can make any assumptions here on virtual machines having started is to use the option "Continue immediately if the VMware tools begin". If you need to be absolutely sure that the first VM has started, so I recommend using a longer delay time and possibly also use the option "continue immediately if VMware tools start." I would test the option 'Continue immediately if VMware tools start' widely well.

• Auto screen on after 10 in the 6s iPhone iOS upgrade

  Hello

  I deal with the issue of auto screen, when every I picked up my cell phone in my hand or take his car on any movement of 1 place to another without moving the screen of my pent is lit for 2 seconds, what happens after the upgrade to iOS 10.

  Please notify

  Thank you

  Yougeshwar Khatri

  Hi there, ypkkhatri!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that after updating to iOS 10, your iPhone 6 s screen turns on automatically when you pick up the phone or remove it from the charger. I know there has been a lot of changes in functionality with iOS 10, so I really want to help unravel what happens with you!

  From the information you have provided us with, what you are experiencing is a new feature called Raise to Wake. Whenever you take your iPhone, the screen turns on automatically in order to check the time or your notifications without having to press the buttons. This is expected behavior, and the screen stays locked when this happens.

  Personally, I like this feature a lot, but everyone has their own preferences. If you want to disable the reminder to wake up, you can do this under settings > general > display and brightness, as described here: adjust the display settings on your iPhone, iPad or iPod touch

  I also recommend checking out the following site; It will give you more information about the new features of iOS 10 and help you familiarize yourself with all of the changes: for iOS 10 iPhone user Guide

  See you soon!