Photosmart 7520 Auto-duplex pirnting issues

Similar Questions

• Photosmart 7520 (new) Auto Doc feeder does not work screaming loud noise.

  I just bought this new in box of a second party.  He was obviously nine original bag/Ribbon plastic on the entire unit.  Everything works fine but the car doc feeeder on power unit it is that loud screetching noise sounds like there is always a piece of tape somewhere.  I looked everywhere in TI lifted lids etc.  I had several hp printers and scanners with feeders doc auto know so well.  When you try to use the doc feeder it will move a few short clicks then paper error anyway inseterted, when I click to start a second or third time it advances once again very shortly.  I am handy with tools, etc.. Any suggestions?  Maybe it's under warranty even though I'm not 'original '?

  Thank you

  Stem

  Hey Capt-Rod,

  It is quite possible that the printer is under warranty. It is not based on the buyer, but according to the serial number of the printer. Please, either use the following link. Check your product warranty or call HP.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  From your description, it seems that you have done the troubleshooting necessary, but please plan to take a look at the following link. HP Photosmart 7520 e-all-in-one printer series - when using the ADF, one "original jam: clear jam and press OK' Message displays on the all-in-one."

  You will find a not just yet, you will need to complete and could very well solve the problem.

  I hope this helps.

• Unit Auto-duplex of PSC 2410 Photosmart all-in-one

  I bought a new computer that uses 7 (64 bit) of Windows operating system. I have attached a PSC 2410 Photosmart all-in-one printer. The auto-duplex feature is no longer available, manual duplex printing is available. When this printer was attached to the previous auto-duplex printer unit funtioned perfectly. Only change was to the old unattach & reattach again.

  This problem can be resolved or do I use the manual funtion?

  The duplexer must be activated as described in the "Vista/Wixndows 7 Duplex Printing Troubleshooting Guide".

• Issue on Photosmart 7520 firmware update

  Hello

  I just got my new HP printer today and it is a HP Photosmart 7520, which is optimal.

  I was looking online and I noticed there is a firmware update in the support section.

  My question is my printer has firmware ELM1CN1409AR and the HP firmware site is ELM1CN1320AR. Is my most recent firmware or the one shown on the HP support site?

  My firmware is older, should I update the firmware or just to leave things as is?

  I'm not having problems with the printer from now, but I always check all drivers and firmware all my products.

  Thanks in advance

  Fred

  as long as you are connected to a computer via USB... I doubt that you will experience the problems that are reported SIGNIFICANTLY on the 7520.

  As you saw in my post that you referenced, with a USB connection, the problem of intermittent scanning/printing moved not.

  In addition, please see my entry in the post depending on the current firmware version vs what HP has posted on its support page:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/7520-won-t-stay-connected/TD-p/3954900

  the version currently installed on your printer, ELM1CN1409AR, is the last (at the date of this post) that any printer 7520 connected to a router will be automatically updated.

  However, please note that for those of us, using a wifi connection from the printer to a router, the firmware version ELM1CN1409AR has not resolved intermittent connectivity issues.

• Photosmart 7520 - USB & drivers auto installed - WHAT?

  Windows 7 Home Premium on an HP desktop PC.  I have a HP Photosmart 7520 all-in-one installed via a USB connection.  All my software Windows & HP's current, I think.   I have restarted 10 minutes there and had not printed whatever it is and really did not have anything except throwing IE - and I was viewing a web page.  Suddenly, I get a Windows pop up telling me there install the USB drivers and my printer - WHAT?  So as far as I could tell, 'install' ran OK.  But now when I see "start |" Devices and printers', I see icons for both my 7520 (which is my default printer) and a 7520 (copy1).  What is with that?  Also, I see an icon for what looks like a generic Windows fax device.

  So-, none of you experts know what is happening here and if everything is OK?

  Hello cwr64,

  Welcome to the HP Forums!

  I understand when you restarted the computer, a pop-up shown installing drivers for USB connection and your printer. I will do my best to help you! Sometimes you can experience on a Windows computer if you have a USB cable plugged into the computer when it starts up. This does not mean that the Photosmart 7520 installation has a problem. I recommend you remove the copy of your devices and printers:

  1) click on your Start Menu, then printers and devices

  (2) right click on the Photosmart 7520 (1 copy) and select Remove the instrument

  (3) now, you must have a printer, right-click on it and select set as default

  Yes, you will have a generic fax install in devices and printers, because the software comes with a built-in fax software. You can delete this, if you do not use the fax feature. (However, if you remove and want to use the Fax software in the future, you have to reinstall the whole printer software package.)

  Please let me know if you have any other questions.

• HP photosmart 7520: can this scanner duplex printer?

  This Hp Printer photosmart 7520 can scan side 2?

  No, it is a flat bed scanner, you can scan only one side at a time. Possible only 2 sides scan can be 'manual' analyze the first side, return to the page and scan the other side.

• HP Photosmart 7520 malfunctions of e-all-in-one printer on the clock

  This e-all-in-one printer from HP Photosmart 7520 bought last week and cannot issue to reslove the awakening. Printer goes to sleep as the value, and to wake up, BUT with an error message on the display. I tried AUTO ON / OFF and different sleep wait times but nothing helped.  I can't believe the USB cable or the PC/software is to blame because the wake-up printer, but in a State of dysfunction and should now be in the off position, then press. The answers to this problem.

  JMcKenzie2006,

  Welcome to the HP Forum.

  The following workaround solution should correct the problem - basically how to turn off the sleep function.  It works when all other options have failed to solve the problem: assigning static IP, small insect sacrifice, swearing, all sorts of settings...

  Be aware: I do not know the consequences - if any - turning off the sleep function.

  Printer PhotoSmart 7520 loses wireless - system Mode Timeout Set to zero

  Apologize up front for imprecise language and the way in which this must be done: is a solution and not a standard procedure.  Its use is optional.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP 7520 AUTO SCAN POWER PROBLEM

  I use the auto power feature to copy a document of several pages, but when I scan the same document to the computer produces only a blank page. The page of the printer reports a successful computer analysis, but when the document is opened in the computer there is only a blank page.

  Hi @ABELINC ,

  Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your printer HP Photosmart 7520 and don't get to scan to the computer. Here is a link to the HP print and Scan doctor. Print HP and the Scan doctor will be running a check of your system and your printer to make sure that all the drivers and software are installed and up to date for the scan.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary energy source, as this may cause the issue scan.

  Hope that helps you to analyze.

  Thank you.

• Photosmart 7520 does not not with Google cloud print

  I have a photosmart 7520 which was recorded with HP and have an email address. I associate that with google cloud print.  When I try to print anything my chromebook. the cloud print queue indicates that it has printed, but nothing appears. When I feel the wireles test report told me I have 2 networks with the same SSID but I don't think I have.

  I got some impressions from the 7520 but blindly - it is more often a failure. I restarted my router and restore the default settings for the installation all over again even once, but nothing helps.

  Hello JS01,.

  Thank you for the updated information. And the information you gave me certainly help.

  I have included a link to another thread on the forums with a customer who also has a BT Home Hub 5.  If you click on "this issue has been resolved view Solution ' it will take you to the post where the customer explains how to set up the Home Hub 5.

• Photosmart 7520: PHOTOSMART 7520 STOPPED PAPER FEED

  Printer keeps giving "out of paper" message and there is a lot of paper in the tray.  Try to 'doctor' and crossed throughout the stage, including the cleaning of the rollers.  No help.  Research in the field of paper I see a piece of plastic on him come straight down when the print command is given.  The rollers on this piece are not moving and no paper is advanced.

  Hello!
  Welcome to the HP Forums, I hope that you are @PJC,

  I saw your post on the topic "on paper" you are having with your Photosmart 7520 and wanted to meet with the steps of troubleshooting for this issue. See the link below and if the measures do not fix the problem, contact HP to discuss replacing the printer.

  • An "Out of paper" message on the control panel and the all-in-one doesn't pick up paper

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• Photosmart 7520 series: error Photosmart 7520 series Document feeder

  Error message when you try to print, copy, fax, bed or document scan power - it says that I have to re - load the document into the charger and I am not fed any document.

  Hi @FaithHopeLove,

  Welcome to the Forums of HP Support!

  I see that your HP Photosmart 7520 printer will not print because of this error message "re - load the document". I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing. It seems that the printer is stuck in an error state or there is a blockage in the ADF (ADF).

  I would like to do a hard reset to see if that will solve the problem. Let the printer and disconnect the printer cable and the wall socket for 60 seconds. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.

  Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector). This ensures that the printer is full on and can help this situation.

  If you have access to another computer running Windows 8 or an earlier version, please update the firmware of the printer. Click here to go to the download page.

  To make sure that there are no obstructions in the ADF, follow this guide:

  The ADF (ADF) is not get paper

  If the problem persists, I suggest we try semi Full Reset. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.

  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair. Cost of repair out-of-warranty printers may apply. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on options contact HP - click Get phone number if number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck! Happy smiley

• HP Photosmart 7520:7520

  Replaced my black ink text and got a message error "is missing or defective print head. The print head seems to be missing, not detected, or incorrectly installed. "She will not have the menu on the printer, to come. I took the cartridge and reinserted them but no love, error message keeps showing up without allowing me to access the printer menu. I have unplugged the printer from the power outlet and reconnected but again not of love. I hooked up the printer with a cable of the USP, but always the same without the menu on the printer error message appears.

  When I run the box software tools HP from my laptop, it is impossible to connect to the printer, the without wire became turned off, I have always printed on my laptop using the wireless but now it will turn is no longer or it will connect.

  Using the USP, it can read the estimated ink levels, which do appear correctly, the new black cartridge as full level, the news of "Health" of the print head are missing, when you check the peripheral Services receive ' Mission of printhead failure.

  What can I do? I have had this printer for a year with no problems until now. I am also unable to locate an HP service provider in my area - Chula Vista, Ca 91911

  Kenn

  Welcome to the HP community @KennHopkins,

  I came across your post about the problems of print head and of the ink system and wanted to answer you. My best advice would be to try all the steps in the link below for this type of problem, see if you can resolve the failure of the print head. If the problem persists, contact HP then to discuss a replacement printer or trade with them as an option.

  Poster 'missing or doesn't have a printhead' for HP Photosmart 7520 e - all-in - One Printer Series

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Photosmart 7520: Use of ink

  FAST ink cartridges - printer printed only a total of 892 pages and went through 6 cartridges black (page 750) and two others.  I have never even printed a photo and it shows empty.   It's ridiculous!  Is anyone else having the same problem?

  Hi @rshughes21,

  Welcome to the HP Forums!

  I noticed that your printer HP Photosmart 7520 use your fast ink. I'm happy to discuss this issue for you!

  Please read carefully this guide, using ink in inkjet printers, as well as this guide, How HP measures inkjet by page.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope that these guides are useful and I thank you for posting!

• Double-sided Scan on a Photosmart 7520 of OSX 10.8.2

  I have to be able to scan double-sided for document on my Photosmart 7520 charger. The documentation says this is possible, but there is no printing & scanning option.

  Thank you

  Eric

  Hi Eric,.

  Could you please specify which documents to include this information? I couldn't find this information anywhere...

  The specifications below only list print double-sided and copy (search side or duplex):

  Journal of http://www8.HP.com/h20195/v2/GetDocument.aspx?docname=c03397269&DOCTYPE=Data & searchquery = & cc = us & lc = en

  User guide so only 2-sided copy options list and not analysis:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03456524/c03456524.PDF

  Scan instructions does not include this information:

  http://support.HP.com/us-en/document/c03518299

  Shlomi

• Photosmart HP 7520: photosmart 7520 printer all-in-one fell my SSID wireless

  My photosmart 7520 worked well until a few days ago.  It has stopped printing.  Wireless test report I am not connected.  I tried the wizard wireless set up to get reconnected but my wireless router number has disappeared from the list.  I typed it in manually but it won't.   Anyone know how I can print again?

  Hi @msibrox,

  Welcome to the HP Forums!

  I noticed that your HP Photosmart 7520 will not connect wireless to your Windows 7 computer. I'm happy to discuss this issue for you!

  I would say to begin with a hard reset, by going to this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  I would also like to cycle power to the router. (With the router, unplug the power cable, wait 30 seconds and plug it back.) Wait for the lights to come back and try to connect to the printer again. Installation of the wireless printer.

  If it still does not work, print a Network Setup page. Print a Network Configuration Page, let me know if something falls down, and the number of disconnects.

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."