Auto reorder for desktop Win7

Hello
I have a problem with my desktop computer. Everytime when I update my desktop, icons that I put any where to rearrange back to his car. now I checked Auto-réorganiser it and it still does not work. Now when I ran a file, it was supposed to be a race with "Windows shell".
I ran on the desktop by accident and then whenever I do a right-click on an app, it says "The file name" now I know its not supposed to be here. Can someone help me on how to fix/remove this problem.

Hi AzXGTz,

See the following link, it helped me hope it helps you as well.

http://Windows.Microsoft.com/en-us/Windows7/the-desktop-overview

Also try to run a Security Scanner.

http://www.Microsoft.com/security/scanner/en-us/default.aspx

All the best

Tags: Windows

Similar Questions

  • HP Pavilion g4-2235dx Notebook PC stuck on auto repair for a month now... Please help...

    so my laptop HP Pavilion g4-2235dx product number: C3Q50UA has been slain in automatic mode of repair for like a month now... it goes not far than this screen... the day it happened first I booted up & it real quickly flashed a blue screen that says my computer needs to reboot so itll restart itself for me then it rebooted & went to the screen hp for 10-15 minutes , then went to the automatic preparation of repair screen for about 2 hours, then the screen comes to have dark & remained like that all night... the next day I turned off the laptop & started again & it would be on the screen hp for a long time & id farm & turn on again, then he would start, restart itself then go to auto repair. If I stop it on the page of sutomatic repair then it would be just cranking up the hp screen & nothing else but if id shut down on the hp screen & turn it back on go to repair automatic page... back & suite back & rear returns & suite for days... Finally once a week or so, I gave up... i left on the page of auto repair for about 2 days directly plugged in so he would die just in case he might just need more time but 2 days was too long so I finally unplugged it & left on this page until the battery is dead & haven't touched since... Ive read some of the other posts on the loop of auto repair & what to do, but I don't want to lose all my stuff on the laptop as my images/videos(thought i saved them to skydrive but apparently i didn't complete the whole process to access my stuff from another windows 8 device)... I bought the used laptop & the warranty has already expired... any installation of windows 8 flash disk/drive. I have no recovery disk. so I have no way to replace my OS or recover my data that are already on this laptop... is there something I can do to get out of this dealie loop of auto repair without an installation/recovery disk/flash drive?

    You'll need a Windows 8 rescue flashdisk, HP usb recovery media or disk recovery in order to access the safe mode and the Startup Repair. The cost of a recovery of HP USB is not that much to around $ 30.00 USD. You can also ask a friend or relative whose computer has the same BONE to make a recovery of Windows 8 key for you.

    If you want to recover data from the hard disk before performing any repairs more, then you will need to remove the hard drive. You have the choice to start the installation in a usb enclosure, using a usb cable to power\sata or install temporarily to with a sata available on a desktop at home.

  • addition of CPU/memory for desktop computers in composer linked clone pool

    Hi all

    I want to add more CPU/memory for desktop computers in a pool of composer linked clone but I want to build a pool of test out changes first, while the production area is still in place. Can you screw with virtual material in the main image and then take a snapshot and build the pool of test out of it without him bring the clones in the production pool?

    I think that the process would be as follows...

    1. modify the parameters of material on the main image of Win7

    2. run the main image and let it recognize the CPU and additional memory (probably needs to restart the CPU I think)

    3. close the main image and take a snapshot

    4 create a new pool of test off the coast of this new snapshot

    Thank you!

    Yes it may seem straight, it won't cause any problems. If you want to be very careful with your prod environment, you can just clone the base image and make your tests on it.

  • Auto-pause for cycling

    How can I set auto-pause for cycling.

    Hello

    Auto pause is currently only available for the training of inner and outer race.

    More information:

    Work with your Apple Watch - Apple Support

  • How can I stop auto correct for some words?

    How can I stop auto correct for some words?

    Here's a great explanation and solution:

    mamadi http://coolestguidesontheplanet.com/turn-AutoCorrect-OSX-Mac-mail-Skype-10-9-MAV.

  • HP 3D DriveGuard for desktop computers?

    Hello

    HP 3D DriveGuard is available for desktop PC?

    It requires specific hardware components or requires it just software / drivers?

    Thanks in advance,

    SJW

    Hello

    HP 3D DriveGuard is available on HP laptops - it consists of software that monitors an accelerometer of hardware for the drive heads parks and then a sudden movement (IE if the laptop falls).

    Kind regards

    DP - K

  • Pavilion 550-a137c: power adapter for desktop Pavilion 550-a137c

    Hello! I need a power adapter for desktop Pavilion 550-a137c. It requires an x 64 watt, v 11 b with a special plug adaptor. Where can I get one?  Thank you!

    @Jbgss, welcome to the forum.

    Because the computer is only a year old, you should be able to do it here.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • How can I disable Auto Grow for all structures in memory?

    I inherited a ton of code LabVIEW with Auto Grow enabled for all structures (loops For, case of Structures, etc.). There are thousands of these structures.

    How programming (or other) turn off Auto Grow for all structures in memory?

    I met the same problem. I prefer not to use auto-grow, but naturally, it is in most of the code I inherit. In any case, this VI should solve the problem. I found it on these forums earlier.

  • cannot turn off auto-renewal for any reason any

    I can not turn off auto-renewal for any reason because when I click on change it takes me to a page asking to put a code that was sent to my email and I'm not sure yet what the good e-mail even if I changed the security evidence and I'll go and contact Xbox , but this is a last resort

    Your best bet would be to contact Xbox support or use the Xbox forums.

  • Pavilion a6255.it: page of drivers and software for desktop Pavilion a6255.it PC

    Hello guys. Can you give me official page of drivers and software for desktop PAVILION a6255.it PC? Thank you

    Good noon.  Please find the link below contains the list of drivers for windows vista

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-A6200-desktop-PC-series/3548186/model/3634710

  • I want to use my OWN photos for desktop PC

    I want to use my OWN photos for desktop... my old windows 7 tells u how... it (Thank GOD not windows 10), still 7... don't say a thing about how to... Help

    See if this tutorial will help.  Background can be changed in Windows 10 also.

    Change the wallpaper

    Easiest is to right-click on an image file and choose - set as wallpaper

  • Why my friend (another computer) can't open my "VS Express 2013 for desktop" application?

    Why my friend (another computer) can't open my "VS Express 2013 for desktop" application?

    I'm new in the present!

    So I create an application and I give it to a friend and when he wants to open my application has had this

    http://gyazo.com/e60ffa5468bf88de185f701de39fa6f2 (there is a link to the photo)

    What can I do? Please help me!

    Hi Razvan,

    Since the issue is with Visual Studio Express 2013 Application, we have a dedicated Forums that will work on these issues. I suggest you post your query on the MSDN forum for expert assistance.

    https://social.msdn.Microsoft.com/forums/en-us/home?category=VisualStudio&filter=AllTypes&sort=lastpostdesc

    Hope this information is useful.

  • Microsoft has never issued an update for the Win7 disk defragment utility?

    Microsoft has never issued an update for the Win7 disk defragment utility?  Thank you.

    Original title: Win7 updates

    To my knowledge, the Defragmenter from Windows 7 has not been maintained since the liberation.  You have a problem with it?

  • How to install regional language for my win7 HP pack.

    How to install the language pack regional (kannada India) for my win7 HP.

    I get the message error "language pack is not the same type as the system.
    I downloaded the language of the official site of Microsoft file...
    Pls guide me. Downloaded language pack is not registered in the system drive (drive c).
    Is a reason... or any file supporting the file is missing

    Win 7 Ultimate is the only version that can change the language packs.  Ultimate is yours?

    you have validated your OS?

  • How to add and remove app for desktop icons in windows 8?

    How to add and remove app for desktop icons in windows 8?

    Try right clikc on the desktop will create new and the shortcut then copy and paste the path

    Otherwise just right-click on the icon you use to get the programs and send to the office or by copying and blocks the icon on your desktop

    I'm sorry if I still get the wrong end of the stick and maybe someone else you know what

    hope this helps

    I.T. tech admin

Maybe you are looking for

  • Satellite A500-15N "windows failed to load.

    I turned on my laptop today and started the usual startup process.Toshiba - logo (press F2, F12)-Green windows loading bar Then the laptop displays a black screen and nothing happens.When I turned off the laptop and turn it on again I get a message s

  • More than 54% on my sony vio laptop battery!

    Similar experiences / solutions please?

  • get "Windows7 not genuine copy" message

    Several years ago, I bought a HP G71-340US notebook Windows7 (it was a refurbished model directly from HP). I used it for years of mant without problems until last week. I get now on the bottom right of my screen 'Windows7 build 7600' Message this co

  • Opening links in Outlook Express

    I can't open links in Outlook Express.  I have Windows XP and you use Gmail.

  • No administrator accounts work! Need help urgent

    Well, it's my fault some how... Someone I was showing how to use command prompt to disable an account (net user active: No.). After doing this to one of the accounts, passwords or same user represents for all users, except the comments which I curren