Auto repair

Similar Questions

• NB10t - Preparing A history of installation - auto repair

  Hello

  has got a brand new NB10t-A. It works today and started the installation process. I got to the screen when you select a color theme and enter the name of the device. I haven't that I had to get out. I closed the cover thinking it Hibernate and resume ok later.

  When I got home I turned it on. the color selection screen reappears ok. I selected a color palette and then entered a name. the machine then suspended and unresponsive. I waited a few minutes and held down the power button to stop it.

  When he started, he said something in the sense of "system problems and needs to restart". after reboot, it will now in a loop and says "prepare auto repair. It shows the screen toshiba with 'Prepare auto repair' downstairs, but then the screen turns white for several minutes and it has happened several times now.

  can anyone help?

  Hello

  Try this workaround:
  Disconnect the power adapter and remove the battery.
  Now hold down the power button / stop along 30 sec.
  Then reconnect the battery and the AC adapter.
  Press the power button to power the laptop and press F12.
  Now you should see the boot with bootable devices menu.
  Last option should be HARD drive recovery. Select and start the process of recovery.

  Hope this helps

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Re: Satellite C855D-13N stuck on auto repair - recovery does not work

  Hi, guys

  My Toddler press the Start button and keep the key all the keys on the laptop before her start and was suddenly cut off and I try to restart again now is stuck on auto repair

  I forgot to create a recovery disc, so I order a Toshiba, and I received it yesterday starting from f12
  I did put the cd n ° 1 and keep saying missing files error

  here what it says on the laptop (TOSHIBA SATELLITE C855D-13N) 3 MONTHS

  * Your PC needs fixing *.
  * This operating system could not be loaded because a required file is missing or contains erreur.*
  *: file: fwpkclnt.sys*
  * error code: 0xc00000e9 *.

  * you will need to use the recovery on your amovible.* installation tools
  * If you do not have any media (such as a disc or USB device) contact your system administrator or the PC manufacturer *.

  * Press F8 for commissioning setting *.

  When I press F8 nothing happens

  Can someone help us out please
  Thank you

  Hello

  The message looks like the laptop will not boot the disc.

  The question is: is this a problem with the new recovery disks, or perhaps with Notepad

  To be honest, I think his recovery disk problem, and maybe you will need contact the drive vendor to replace the recovery media.

  But before that, try this:
  Switch on and press F2.
  Now you should be able to access the BIOS. Set the CD/DVD device in the first starting position here. Also, to clear the safe boot option from the UEFI CSM.
  Now to boot from the recovery disc.

  Would be interesting to know what is happening

• Satellite C50D-B-120 in loop - preparation of the auto repair

  my laptop keeps going into a loop, when I turn it on it says 'Auto repair Preparation' then goes on a screen black for several hours without anything I tried to restore the disk hard taking 0 when turn, but it does exactly the same thing in a black screen. Any help?

  This could be caused by the bug of Windows 10.
  There are many different items on such behavior Windows 10 and probably this kind of issue should be fixed by Microsoft update.

  This is one of the items mentioned:
  http://www.Forbes.com/sites/amitchow...s-reboot-loop/

• Lenovo Y410P was stuck in the loop of auto repair, but it came out

  So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

  TookMeAWhile wrote:

  So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

  Check the system for corruption files by running sfc/scannow in an elevated command prompt.

• Y410P stuck in boot loop 'prepare auto repair.

  Hello

  Unfortunately, I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "prepare auto repair. After a few moments, it will say "Diagnose your PC" and then "repair disk errors. It could take more than an hour to finish. "Edit: then after a few seconds, it restarts and everything happens again.

  As you can imagine I am very satisfied with this and I have no idea what may have caused it. I am currently studying in Belgium so no help here I can get will be greatly appreciated.

  Thanks in advance!

  
  

• BootCamp "preparation-auto-repair" after the triple-boot Linux install.

  Hi everyone and thank you in advance for your help, I'm pretty desperate here...

  I use a retina MacbookPro 13 "with dual-boot OS X el-captain and Win8.1 for years, with also a small third partition"shared file ".

  Today, I needed to install a small partition (ubuntu14), so I decided to take a part of the macOS (26g) of Linux Ubuntu partition.

  Everything went well during the installation process, but now I can only access my OSX. When starting with "command-key" Linux is not appear at all and Win8.1 goes to 'prepare-auto-repair' blue screen without other information.

  I tried to install refit or without success.

  Running diskutil list:

  disk0s2 is my OS X partition

  disk0s3 is my OS X recovery partition

  disk0s4, that's where I think I installed correctly Ubuntu14

  disk0s5 is my shared files Partition (worked between osX and win8.1)

  disk0s6 is my Bootcamp Partition of Win8.1

  

  Running diskutil list of cs:

  

  TPG - vv - r see the/dev/disk0 : running

  

  Running disk/dev/disk0:

  

  Thank you in advance to those who can help me on this.

  All the best,

  Yoln.

  In addition, with regard to this topic: 'not bootable after Ubuntu Installer Bootcamp. "

  I have the exact same blue screen when you try to run Win8.1, but I never see the reclamation / screen, only right boot to OS X, if I don't press any keys.

• Yoga 11 rt stuck on the preparation of the auto repair

  Hi all
  My lenovo yoga 11 is blocked at startup (auto repair preparation) for a day now. I desperately need your help. This tablet is what links me with family and friends at home (abroad in Asia for 7 months and counting). I just he might walk, so if a reset is needed I'm oke with who. But please, explain to me how to perform the steps that I can't find useful information online.

  If someone could help me on this, that would be much appreciated. If more information is needed please ask and ill do my best to accommodate it! Thanks in advance to all, Tom

  Try the button nova its next to the power button its very small and if that has a repair option I, it is also the place to do a complete reset

• HP Envy 700 060: HP Envy 700 060 hang at startup "prepairing auto repair.

  I would be grateful for any help?

  Took me to upgrade to a HP Envy 700 060, this work very well when I book in windows, however, I'm using Linux Mint 17.2.  When I put the hard drive in the PC, it hang at startup ' repair automatic Prepairing.  I can book for the CD of Linux mint and see the files on the Linux disk.  What I want to do is boot in window 8.1 with installed theLlinux drive, then make a copy of the files on the hard disk, Linux, before reinstalling the Linux mint.

  That's why does anyone know how to disable HP auto repair facility so it starts in Windows?

  Note in the Bios, it seems not possible to book specifically from a hard disk, the option appears to be limited to my latest Bios PC options

  Grateful for any help or suggestion

  Oobals

  He sees the Linux bootloader and tries to fix it. You need to install your OS' are in conjunction with each other. Perhaps you could try booting from a floppy disk to repair GRUB and see if you can not solve the bootloader to enable either Windows or Linux at startup but that is the only way I know Windows and Linux running side by side... have GRUB (the Linux boot loader) on the main hard drive and it comes up with an option to start. If you want to run the OS' are independent, disconnect the drive that has only the other OS on it.

• Spectrum of HP x 360-13-4009na: Machine starts with "Preparation of auto repair. Cannot reset. "The disk is locked.

  One day the machine started start mode "Preparation of auto repair. I tried to reboot several times, including a hard reset without effect.

  Then I tried to "put this PC" but I get the message "the drive where Windows is installed is locked." Once, he did pass this screen and asked me my credentials for the Windows account but then failed. Now it's to the same message.

  I then tried of the system hard disk diagnostics. The DST short and SMART test passed BUT the long DST has failed with an error code ridiculously long...

  0LPMB9-7LT88D-MFPWMG-61V503

  My conclusion is that this problem is hard disk (SSD) related, but what I can do now.  Needless to say my warranty missed in January 2015 (I think) and the machine is currently blocked.

  Does anyone know what the code above means?

  If it's a SSD failure, how can I get it replaced and then how do I reinstall Windows 10 since HP did not provide support for recovery with the machine, either 8.1 win or win 10.

  Any help appreciated.

  Paul.

  Your long test failed.  I wouldn't replace the drive if I felt it unnecessary.

  You'd better replace but weather that you do it yourself or not, I can't comment. HP has no instructions for your model on the replacement of this player.

  If your comfortable with DIY, go ahead as long as its out of warranty.

  Specs say it has a 256 GB SSD M.2

  Personally, I would like to look at the disc before I ordered one, to make sure that I get the correct type.

  Good luck.

• HP Envy m6-k010dx: update Windows 10, recently received message OS not found, stuck in auto repair

  Recently updated to Windows 10 8.1 and everything was fine, but then I started affected by Frost (windows stopped responding and the mouse and keyboard and I couldn't get to the Manager of the tasks accordingly) sometimes the gel would solve itself, but more often than not a closed hard must be carried out. Fast forward to today, and my computer froze 5 + at a time or two hours, then I close it and let it sit for a few hours, because I had to leave in any case. When I turned it on back but can't find OS message not shown on the screen and the computer turns off. I turned it on the message before auto repair, who showed up for a minute or two and then goes to a black screen and stays there, no options provided (I've ever seen the screen which offers the possibility to fix computer or solve the problems I found among other positions) and this has been the case all day no matter how I try to start it. A further experimentation I managed to get Hardware Diagnostics UEFI test using F2 (checking the battery, check processor, check for the wireless module, check the system board and the SMART hard disk check were in seconds, as soon as he started on short Hard Drive DST check that I received the result of the FAILURE and the test fails also) the results displayed as follows:

  ID 90F439-6MP7RE-XD7WXG-60QJ03 failure

  Product IF: E0L01UA #ABA

  Hard drive 1

  Do I have to replace the hard drive? Of course if this isn't the case any other ideas would be appreciated particularly with regard to the possible explanations about what could have caused this since I have not had any problems with the computer before the upgrade and no damage had never place and best way to proceed.

  Update: before posting this I turned on the computer and received the HP normal logo displayed during startup, after waiting a few minutes however the dreaded blue screen appears and displays the message saying:

  your PC must be rebooted, it will restart for you in a few moments...

  Then below this additional information concerns the following text is displayed:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  and then of course the computer shuts down. The computer was then turned and saw the preparation of auto repair as before (I had never received this precondition of message blue screen). So even once any idea would be appreciated, I think I've covered most of the details, but if anything else would be helpful let me know.

  @SabrinaRM: sorry to say this, but the drive test result means that your drive is defective or has already failed - and needs to be replaced. This means that no recovery, automatic or not, will work as the recovery information are damaged on the drive.

  Once you have a new drive, you must restore your PC - but that is a problem.

  Normally, I advise to use HP recovery media to restore your PC to its original state, but, unfortunately, there is only no recovery media HP not related to HP for your PC Product Page.  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/Default.aspx and http://www.restoredisks.com/

  Good luck

• screen showing the auto repair

  Hallo,

  I have this HP Pavilion sleekbook 14 notebook pc that would not allow me to boot to the desktop. When trun-lit, it starts with the "preparation of the auto repair" on the screen and the screen truns blue later. This happen after running the system recovery and everything on the rear the files in the system.

  Please someone should help me.

  Thank you

  Piro

  First check your HARD drive using the HP of the F2 key diagnostic tool, if the test is successful try to do a factory again reset by pressing the F11 key...

• Where is XP auto repair / file '.exe' of recovery?

  Hello

  I use Windows 7, but I helped someone with a slow XP instillation, remove unwanted programs only to have all icons disappear and all the icons became inactive (there is no program associated with them).

  Why is this happening and how do fix you this?

  I remember using built in '.exe' auto repair file to do a repair of the car that does not need the instillation CD.

  Does anyone remember and where this program works and how to use it?

  If there is another way to solve this problem, I would be happy to know.

  It would be a great help if anyone can help me with this. Thank you!

  Annoyed,

  John

  What programs you deleted? Are you referring to the coincidence Recovery Console?

  If you have already installed the Recovery Console, take a look at this. http://support.Microsoft.com/kb/314058

• preparation auto repair

  When I turn on my computer, a black screen with the windows logo and a white rotating circle comes up and sometimes reading preparation auto repair and other times reading diagnose your pc I turned on and off-disconnected the f8 pressed to battery and let nothing-ive it operate until the battery ran out and let it run for a long time when its plugged in and nothing happens the same screen is still there - I guess this is arrived with a years warranty? who is subject to run off-i have a dv6 that has windows 7, when I bought it and I installed a free update of windows 8 accompanying

  Hello

  (The menu uefi bios) error codes would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• HP Pavilion 20 - preparation auto repair

  My HP PAvilion 20 froze on me. I went to restart it and now it shows the HP symbol and it says "preparing auto repair." Then the screen becomes a blank black screen. Is there something I can do?

  Hello

  The hard drive (HDD) has failed.

  Your PC is guaranteed?

  Contact HP here and tell them the short dst has failed.

  HP will offer a HARD drive in the case of free replacement warranty. If you have not created a recovery HP disk set you need to get a recovery will contain HP to restore the image on the new HARD drive. Please tell HP that you do not have a defined recovery disk when contact you for HARD drive replacement.

  Jaco