The value of VM to restart automatically after a power failure

Similar Questions

• starts automatically after a power failure

  Hello, I use a Macbook pro 8.1 13 "(A1278)"

  I need 'start automatically after a power failure' work as below

  

  Bun, my macbook can't activate this function. I can't find the same box. Check the screenshot below.

  

  I'm looking for the options "start automatically after a power failure".

  This feature appears to be available only for the Mac desktop.

• Why my laptop restarts automatically after shut down when connected or not connected

  Hello Sir, I have HP PAVILION DV4 series laptop. I am currently using WINDOWS 7. But since 1 month it appeared the problem, my laptop automatically restarts after you close when it is connected or not connected. After that I end my laptop shut down normally. Any help would be appreciated.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. have you made changes on the computer before this problem?

  2 you receive error messages or codes to the computer restarts?

  I suggest you to follow the below methods and check.

  Method 1: perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2: System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the question did not resolve, try Method 3.

  Method 3:

  You can view the steps proposed by cavehermitt in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-computer-restarts-automatically-after/daeb457a-3509-4BE9-a85b-2935c8c3e108

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful. Please let us know if you need help with Windows.

• How to get the shortcut to exe on deskto automatically after installation?

  Can someone tell me how to get the shortcut to exe on deskto automatically after installation?

  Kind regards

  Vijtin

  Look at this link

• This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure

  I got a 5.1 cluster with some problems HA.

  a few virtual machines are showing this

  This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure.

  When I try to reconfigure HA on the host. It times out and fails.

  any idea?

  Instead of reconfiguring HA on the concerned host, have you tried to disable HA on the cluster and enable again? See: VMware KB: State of the virtual machine changes from protected to Unprotected

• This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure

  ESXI 4.0 3 running virtual machines.

  600 GB HDD / 8 Gigas of RAM / Xenon QuadCore.

  ESXI 5.5 (I had two).

  Using Raid 01 (1 TB)

  RAM of 64 Gbite

  Hearts CoreI5 Xenon proceso.

  VCenter server deployment with Vmware Storage appliance.

  Problem:

  I've had enough material resources, in fact, I had twice the disk space and memory to four times more in the reception of news

  When migrating virtual machines in ESXI 4 server and get Vcentener turn it on the message "this VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.  "

  I do not understand because the servers have resources, I can't find what is wrong.

  Should I use another method of migration?

  Once that you have migrated, can solve this problem without re-migration of computers?

  I found this post, but it's no imformation. This VM could not become vSphere protected HA and HA cannot attempt to restart after failure of.

  Thank you

  See:

  Re: This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.

• No network after a power failure and only works in safe mode with network. Operating system is Vista SP2.

  The latest patch to update this system was .net framework 4

  This behavior has occurred on several machines after a power failure in our factory caused all systems restart.

  I have run chkdsk

  I ran sfc

  SafeMode internet works fine.

  Clean boot does not solve the problem.

  Cannot remove .net framework 4 because I can't get windows installation service to work properly.

  X red on the connection in normal mode

  I run with the reset.cmd file subinacl to reset all the registry settings. It gave no results.

  I looked at all of the services that are running successfully in normal mode and those that are run in mode safe and that services to start. This got me internet again in normal mode, but we are far from finished there are a lot of services is still needed. I'll make one by an approach to see what will begin and what doesn't.

  System Restore was successful, but had no bearing on the issue. Here's the solution that worked.

  Safe Mode boot

  on computers that are running Windows live onecar I ran as administrator onecare removal tool

  Remove the Adobe Flash 10 utility

  Open msconfig and services.msc

  enable all services that are running in safe mode to run msconfig on the next reboot. Also enable required services for Windows updates and windows install

  Enable

  BITS, com +, Windows udpate, workstation and service server and all dependent services. If you miss some that is good because you and individual services and start them from services.msc when the next restart.

  Restart the machine.

  I found that after this reboot a few updates have been posted in the update list installed in the control panel that had not been previously listed.

  Remove all instances of Java (cannot be done in safe mode)

  Reinstall Java and flash player from their respective Web sites

  I installed Microsoft Security Essentials www.microsoft.com/security_essentials

  Run windows update and install the updates.

  run msconfig and select normal startup

  Restart and ensure normal operation.

  It takes about 1/2 hour, 1 hour per machine which was much lower than a full reinstall.

• Computer restarts automatically after selecting the Hibernate mode

  Title: Can't put my computer in hibernation

  Hello
  After that some windows updates I can't put my computer hibernate more. When I put it into hibernation it will restart automatically, I tried a lot of solutions on the net and finally had to re - install fresh copy of windows 7 and it worked for a while, but after a few updates Windows it is no longer possible and I checked the settings and no change, so if anyone can help please do!

  Specifications of the computer.
  CPU i7-2700
  8 GB RAM
  Windows 7 64-bit
  HARD DRIVE 500 GB

  Hello

  I suggest you to check the BIOS settings to make sure that sleep and Hibernate settings are enabled.
  For reference:
  Check why I can't go back to sleep or Hibernate options on my computer? category and check if it helps.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  Hope this information helps.

• Computer restarts automatically after closing down

  * Original title: when I shut down my pc automatically restarts it? How can I fix?

  When I shut down my pc automatically restarts it? How can I fix?

  Hello

  1. you get any error message? If Yes, what is the full error message?

  2 has there been recent changes made on the computer before the show?

  Please try to update us with the results and the methods provided below.

  Method 1: Open the power Troubleshooter and check.

  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

   

  Method 2: Run the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 3:

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Follow these steps:

  a. Click Start, type regedit and press ENTER.

  b. navigate to the following location:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  c. double-click "PowerdownAfterShutdown"

  d. then, change to "0" if it's '1' OR

  Change it to '1' if it is '0' and press ENTER.

  Then, restart the computer and after that it restarts, try to quit again.

  If this does not work, make sure that you change the value in regedit back to what it was originally *.

  For more information, see the article and check.

  Turn off your computer properly

  http://Windows.Microsoft.com/is-is/Windows7/turning-off-your-computer-properly

  Let us know if it helps!

• Vostro 3500 restart automatically after a

  I have a Dell Vostro 3500 which restarts automatically once I have stop my laptop and unplug the power cord.  I also observed that light scroll in "keyboard and device lights" stays on. The only solution I have is to force the judgment that it restarts and then remove the dough every time.

  Wondering if anyone in the forum also seen this sort of question and have a solution.

  There is no error of this combination LED codes in Vostro™.  I also shot "Automatically restart on error" in the Panel.

  Hi riteshgarg,

  I recommend diagnostics currently running on the computer (restart the computer now the FN and the power button). Let the full diagnosis and Note If you find any error message.

  In addition, check in SafeMode with network. Restart the computer and press F8 on Dell logo and select Safe mode with network. Check to see if the same problem persists.

  Waiting for your answer!

• Whenever I try to go into safe mode, my PC restarts automatically after a few seconds.

  I use Windows 7 Enterprise edition (64-bit)
  Normal mode/start works fine.

  Hi mcalix,

  It is one of the locations where you will be able to disable the auto restart of the system failure. The other location is, as the computer starts, press F8. In the advanced boot menu, select the disable restart automatic option on the system failure.

  I also suggest you check the exact error message you get to do this in the Event Viewer:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  I also suggest to check if Windows 7 is compatible with your computer hardware.

  Whether your hardware is compatible with Windows

  http://Windows.Microsoft.com/is-is/Windows7/find-out-if-your-hardware-is-compatible-with-Windows

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Hope this helps and keep us posted.

• How can I keep the values previously entered on a form after submission

  Hello DW,.

  I have a form and after it get presented... I have a javascript link, which goes back to the form and values remain to be submitted.  Here's the javascript link: < a href = "JavaScript:history.go(-1) (-2)" > < / a >

  It works very well, but now we use the attribute 'require' and when users click on the link it clears the values.  Is there a simple way to prevent erasure of these values, without having to use the chips and cookies?

  -Alex

  To have a form field to fill in with the value of a variable, we can use PHP like this:

  (input type = "text" name = "address" value ='' / >)

  If the form and its treatment are part of the same script, so it's simple. So, if your form uses the POST method, and you have extracted the values like this:

  extract ($_POST);

  .. then $address will be available to complete the form.

  This can also be done with javascript, but I always use PHP for this.

• Download statusbar the downloads module of compensation keeps automatically after completing

  As the subject says. I've recently updated to Firefox 19 and this problem came. Before the update, downloads would remain in the bar of the add-on until I open them manually deleted.

  I tried to put the values set to false for browser.download.manager.closeWhenDone and services.sync.prefs.sync.browser.download.manager.closeWhenDone, but this does not solve my problem.

  Type Subject: addons in URL and choose the Download Status bar addon

  Goto option > features > [uncheck everything what he. and give it a try

• Unable to connect to the internet (using a wired connection or wireless) after a power failure, error "the cable network is disconnected"

  After a power outage, I can not connect wireless (cannot connect even with the wired ethernet cable); get message "network cable is unplugged", which is not.  The cable modem work properly in wireless mode with two other computers.  System to an earlier date of reload and change the cable has not solved the problem.  Running Windows XP.  Any suggestions?

  Hello

  I suggest to follow the steps provided and check if it helps.

  How to troubleshoot the following message appears in Windows XP: "a network cable is unplugged": http://support.microsoft.com/kb/910389

  Hope this information is useful.

• Error in the application of Muse after startup after a power failure

  Hello

  I had a power failure and after I got the following error:

  The msg box is modal, and the ok button does not work, then the application is frozen.

  

  I tried to re - install the application twice, but without a bit of luck

  Advice would be appreciated.

  Brdgs

  E Bjarn

  Hi Bjarn

  Have you tried to create a new site, and see if it crashes too when opening. If it works fine, your file may be damaged .muse.  In addition, where was located, as the network drive or local file drive?

  Please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.