AutoPlay does not start for my Canon camera

Similar Questions

• AutoPlay does not work for usb cords

  When I plug my cable for my iPhone or Canon camera in the front USB port autoplay does not appear. iTunes recognizes my phone and syncs fine. No devices are listed under "devices" in the "Auto run" section of the control panel. I found the iPhone under cameras in the control panel but cannot depend on AutoPlay.

  I tried all the solutions I found on this forum and others, but nothing did.

  I just tried to put a DVD into the cd drive and AutoPlay didn't pop up for be... Help!

  Hello

  Follow the steps in the article below and see if that fixes the problem.
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

• Does not start for an hour

  I have a HP pavilion dv7, when I turn on the computer, or the wake to the top of the screen does not respond for at least an hour.

  The LCD is not the problem because when you turn it on it does not start until the screen lights up. When I open it it doesn't

  meets for one hour. Help, please!

  Hello MiSoHe,

  1. I wonder if by performing a "clean boot" would solve this problem. The following link will provide instructions on this task: http://support.microsoft.com/kb/929135
  2. Update the BIOS of your laptop. Click here to get instructions.

  I would like to know if it works!

  Best regards

• AutoPlay does not work for DVD - RW drive

  Original title: Media Player

  When I go to my computer-drive DVD - RW (D) - properties - auto play prompt me each time to choose an action-apply-OK; It dose does not work when I insert a disk in my computer; WHY? Help, please!

  Hello

  ·         What exactly is the problem? Do you want to say AutoPlay does not work?

  ·         What happens when you try to insert the CD/DVD in the CD/DVD drive?

  ·         You are able to open the CD/DVD directly from the my computer window?

  I suggest you follow the steps mentioned in the articles below.

  The AutoPlay function does not work and the current media does not appear in my computer when you insert a CD or DVD

  http://support.Microsoft.com/kb/817357

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• AutoPlay does not work for my SD card reader.

  I can't get autoplay or all default settings to work when I put an SD card in the reader.  It does not work to press SHIFT with the media in.  The only way I can get the pictures on my SD card is going on computer and clicking on the SD card.  I would like that for map contents SD be imported automatically into my pictures folder (as I did on Vista).

  Yes, if you open WL library before inserting the SD card and insert then SD, WL PG will notify that an external device with images has been added, you want to import?

  I found this fix somewhere (I don't take credit for it). This will bring autorun to the SD card reader. I'm sure that is deliberately not functional for safety etc.

  create two reg files. Name them as you wish. Whenever I have install win7 or reinstall it is one of the first things I do. Still works. (Once you have created a text file with the .reg extension for each you can insert into registry by double-clicking the files newly created reg.)

  1 reg file:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoActiveDesktop" = DWORD: 00000001
  "NoActiveDesktopChanges" = DWORD: 00000001
  "ForceActiveDesktopOn" = DWORD: 00000000
  "EnableShellExecuteHooks" = DWORD: 00000001
  "NoDriveTypeAutoRun" = DWORD: 00000000

  2 reg file:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoDriveTypeAutoRun" = DWORD: 00000000

  Good luck

  GE

• Why autoplay does not start whwen I insert a dvd in my acer aspire

  When I insert a dvd into my player I get a message saying that windowe does not say this and that ITI may require setting in shape, but I can't get autoplay to exploit

  In the first place to run this http://support.microsoft.com/mats/cd_dvd_drive_problems/en?wa=wsignin1.0 FixIt

  If the problem persists, then in Device Manager there yellow caution marks?

• AutoPlay does not illuminate when connect you camera

  original title: AutoPlay

  Hello! I have a problem with a camera Fuji Finepix J12 and is that when I connect the camera to the PC via the USB of the PC bleeps port as if he found something being plugged, but no AutoPlay appears and there is no sign of the drive in my computer. If I Plug one of my readers, flash etc. they show all with Autoplay and show in my computer. So annoying because it seems like this device which is the problem, but it worked OK in the past. In the AutoPlay list Finepix J12 watch. Help, please

  After turning on the camera and pressing the button for approx. 1 second reading, that the PC should recognize the camera automatically, Fuji FinePixViewer should start automatically if it is installed and load photos window is displayed, otherwise you can try to uninstall and reinstall the software, please refer to your manual.

  When there are a lot of images stored in the memory card, it takes time to display on the screen of your PC. In addition, it may take some time to import images or you may be unable to save pictures. In this case, use a picture memory card reader.

  I hope I could help

• Import of the 'show preview' device does not work for RAW (Canon T1i/500 d)

  Hello

  Not sure if anyone else has seen this.  I just got a canon T1i (500 d for you Europeans).  When I connect the camera to the computer and select Import device and select "Preview" in the import window, only JPEG images to display thumbnails.  All my RAW images appear as grey areas.  It is the first digital SLR, I've ever owned, and the first time I am really using lightroom.  It's killing my workflow plans, as I ususally upload images into folders and appoint, by category.  Without seeing the thumbnails, it is impossible to know which category what images belong to.

  Anywone have ideas?  This happens with all RAW images on all cameras?  Is this a problem T1i?

  Thank you.

  w0den

  As John said, use a card reader for added speed, data security and flexibility. However, if you use a direct connection to your camera under windows, your camera must be in mass storage (called PC connection menu canons USB) mode. Some Canon DSLRs do not have a mass storage mode (Canon booh!) and you'll see never seen in the Lightroom Import dialog box.

• Cod error invalid 907/App does not start for OS 5.0 devices

  I can't give any details because it's my customers having trouble and not me, but some customers (not all) installation of my application (which is built against 4.3 for non-Storm devices and 4.7 for storms) on their devices OS 5.0 get "cod not valid error 907" install errors at the course where my usual app run if she moved.

  Once again, most of the clients (including most of the users of OS 5.0) aparently install and run the application very well (at least, we don't hear very many complaints), is not a generic problem.

  I tried the building against 5.0 for the limited set of customers affected by the issue and tried to remove all generated files and building completely clean for all versions of my application, but nothing will do.

  I was wondering if anyone had heard or experienced this kind of error on new or more advanced devices.

  Thanks for any information you can share.

  mellowfish, I didn't believe that I was hating on you.  The 907 is horrable, I presented a paper on it at the DevCon last year. I could send you my slides if you want.  My best advice 1 use updateJad.exe after execution of code signing rather than doing it manually.  that COULD help.

  I know that these questions appear on upgrades and my best thing I can advise you to do is to remove some * beep * of the old JAD?  SHA-1 signing keys are a problem, that I found to do it.  In addition, if cod were previously THAT BES pushed rather than OTAed it may cause problems.

• Presario SR5507F does not start for Vista after "Windows Update"

  One of my friends has a Compaq Presario SR5507F. She is old and doesn't know much about computers. She told me she had a message that an update of Windows was necessary, so she hit 'continue' and walked away. When she came back, the computer was restarted on a screen, she had never seen before: a black screen, with the 'C' and "Compaq" logo in red in the Center, with " and " on the lower left and " and v5.27 ' on the bottom right side.

  I checked to make sure that the keyboard was solidly connected - the NumLock lights etc flash momentarily when the computer starts.

  We have tried pressing ESC, F10 and F11, in various methods: turn on the computer, and then hit the button, turning on the computer using the button is pressed, turn on the computer and repeatedly hit the key, etc.. All had the same result - the screen with the logo of Compaq, and nothing else happens.

  I know that some on computers, but that me stem.

  Of course, she didn't know she should do a set of recovery discs, is not so... she.

  If anyone has any ideas, I'd be happy to hear.

  Hi biolabprof01,

  Sorry to hear about the sentence. There are a number of things to try. First, try the procedure described in this HP support document on Vista won't start do not.

  If you can, try to perform a System Restore or System Recovery.

  If you still cannot start and cannot access the System Recovery Wizard, you can order HP recovery disks (see the section on CD - ROM order page).

  I hope this helps. Let us know how it goes.

• Upgrading RAM and now computer laptop does not start for Windows 7

  Hi all

  I'm working on laptop HP Pavillion G7-1070us of my father, and I'm having a problem starting after the installation of 8 GB of RAM.  I upurchased 2 sticks of 4 GB of DDR3 PC10600 UN buffered, NON ECC RAM of Frys and everytime I go to start the laptop it throws an error that can not load Windows and offers to run the repair or start normally... little matter that you select, it goes back in the loop of what prompts to repair or load... The BIOS recognizes all the 8 gb... have you tried 2 different sets of different manufacturers (Patriot and Crucial). As soon as I pop 2 2 GB sticks in it boots fine... I even tried to start the the Windows 7 DVD to repair windows, but he always comes back in the loop... I tried the two current and previous BIOS without success... Help, please

  Hello

  Sorry, I've updated the link:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-1070us-upgrades.html

  Kind regards.

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!

• AutoPlay does not retain what I select in windows 7. Changed 3 ot 4 times.

  It changes to "take no action" he did for CD/DVD, Media Player, games, etc. Is there any solution for this?

  Hello

  Thanks for your posting in Microsoft Community

  You can bail out of the selection yourself and change the AutoPlay option.

  Click the Start button and in the search box of the start menu, type and press auto on enter, or if the research does not AutoPlay, click Start-Control Panel-default programs-change AutoPlay settings

  Here are all possible media and devices as well as their auto run changed settings or default. With each media or device is a drop-down (arrow) that allows you to change the auto play action. For example, if you wanted to Media Player to start for all video files, click the following video files, select Windows Media Player, and then click Save:

  Around the navigation, you will see different options exist for other devices and media. Among the parameters common to choose are take no action, ask me every time, and open folder to view files using Windows Explorer. After making changes, make sure that you click on Save to save the new setting.

  If Autoplay does not start after you insert media or when you plug in a device, but the fact of the work for the other media and devices, follow the steps as a possible solution below:

  a click the button start-all programs-accessoriesand then right click on command prompt.
  b - click on run as administrator.
  c at the command prompt, type net start shellhwdetection, and press ENTER.
  d - restart your computer

  More help

  http://support.Microsoft.com/kb/330135

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• MSO - AutoPlay does not work

  Hello

  I have a problem with an old application (simple edition) that I need to update.

  AutoPlay does not work for two MSO I. I saw a few days that it was a bug with DPS and iOS ago 8, but I just read that now it is fixed:

  20 October 2014

  corrections of iOS Viewer

  • If several MSS on the same page is to auto play, only the first ASM auto-lues on iOS devices 8. This problem is solved. (3835976).

  The problem is that I got 3 articles which did not work before this bug has been fixed. I update my articles and today, only one is correct. II have the same problem with the other two articles.

  What I got is a slide show auto-play with two States of objects.

  Any help? Thank you.

  

  The version of the content in the App Store adobe Viewer is still 32.1, which has the bug. 32.2 version is still in review and I hope it gets approved very soon.

  If you encounter this problem with a custom v32.2 Viewer you created recently in the generator of the app (built after October 20), so there may be additional bugs.