Does not start for an hour

Similar Questions

• AutoPlay does not start for my Canon camera

  AutoPlay does not start for my Canon camera now that I have installed a new hard drive. Dell has spent an hour setting up AutoPlay to open Windows Live, which is what I did before. Is there a solution to this? I can access Live, but I just want to do it automatically, as it did before.

  We installed the disc Canon still once, incidentally. I installed the new drive two days ago. Everything else that we re-installed seems to work very well.

  Hello

  ·         Auto play the work for other devices?

  Follow these steps:

  a. click the Start button, click principally made programs, accessories and then right-click command prompt.

  b. click on run as administrator.

  c. at the command prompt, type net start shellhwdetection, and press ENTER.

  d. restart your computer.

  See also: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-AutoPlay-problems

• Cod error invalid 907/App does not start for OS 5.0 devices

  I can't give any details because it's my customers having trouble and not me, but some customers (not all) installation of my application (which is built against 4.3 for non-Storm devices and 4.7 for storms) on their devices OS 5.0 get "cod not valid error 907" install errors at the course where my usual app run if she moved.

  Once again, most of the clients (including most of the users of OS 5.0) aparently install and run the application very well (at least, we don't hear very many complaints), is not a generic problem.

  I tried the building against 5.0 for the limited set of customers affected by the issue and tried to remove all generated files and building completely clean for all versions of my application, but nothing will do.

  I was wondering if anyone had heard or experienced this kind of error on new or more advanced devices.

  Thanks for any information you can share.

  mellowfish, I didn't believe that I was hating on you.  The 907 is horrable, I presented a paper on it at the DevCon last year. I could send you my slides if you want.  My best advice 1 use updateJad.exe after execution of code signing rather than doing it manually.  that COULD help.

  I know that these questions appear on upgrades and my best thing I can advise you to do is to remove some * beep * of the old JAD?  SHA-1 signing keys are a problem, that I found to do it.  In addition, if cod were previously THAT BES pushed rather than OTAed it may cause problems.

• Presario SR5507F does not start for Vista after "Windows Update"

  One of my friends has a Compaq Presario SR5507F. She is old and doesn't know much about computers. She told me she had a message that an update of Windows was necessary, so she hit 'continue' and walked away. When she came back, the computer was restarted on a screen, she had never seen before: a black screen, with the 'C' and "Compaq" logo in red in the Center, with " and " on the lower left and " and v5.27 ' on the bottom right side.

  I checked to make sure that the keyboard was solidly connected - the NumLock lights etc flash momentarily when the computer starts.

  We have tried pressing ESC, F10 and F11, in various methods: turn on the computer, and then hit the button, turning on the computer using the button is pressed, turn on the computer and repeatedly hit the key, etc.. All had the same result - the screen with the logo of Compaq, and nothing else happens.

  I know that some on computers, but that me stem.

  Of course, she didn't know she should do a set of recovery discs, is not so... she.

  If anyone has any ideas, I'd be happy to hear.

  Hi biolabprof01,

  Sorry to hear about the sentence. There are a number of things to try. First, try the procedure described in this HP support document on Vista won't start do not.

  If you can, try to perform a System Restore or System Recovery.

  If you still cannot start and cannot access the System Recovery Wizard, you can order HP recovery disks (see the section on CD - ROM order page).

  I hope this helps. Let us know how it goes.

• Upgrading RAM and now computer laptop does not start for Windows 7

  Hi all

  I'm working on laptop HP Pavillion G7-1070us of my father, and I'm having a problem starting after the installation of 8 GB of RAM.  I upurchased 2 sticks of 4 GB of DDR3 PC10600 UN buffered, NON ECC RAM of Frys and everytime I go to start the laptop it throws an error that can not load Windows and offers to run the repair or start normally... little matter that you select, it goes back in the loop of what prompts to repair or load... The BIOS recognizes all the 8 gb... have you tried 2 different sets of different manufacturers (Patriot and Crucial). As soon as I pop 2 2 GB sticks in it boots fine... I even tried to start the the Windows 7 DVD to repair windows, but he always comes back in the loop... I tried the two current and previous BIOS without success... Help, please

  Hello

  Sorry, I've updated the link:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-1070us-upgrades.html

  Kind regards.

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• my creative cloud is not getting updated. the update does not start yet. There has been 0% for the last 24 hours now

  my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours

  Hello

  Please follow the steps below and check it, if it helps:

  1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

  2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  3-

  MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  WINDOWS: C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

  4-

  MAC:  Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

  WINDOWS: see, turn the firewall on or off - Windows Windows help

  5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

  Let us know if that helps.

  Kind regards

  Bani

• Windows 8 Pro does not start after windows update updates for April

  Hello

  Pulled up to my PC this morning and was asked to install updates from windows update. Check the list, there are 11 important available updates. I have unchecked and hiding implementing Nvidia updated as I want to do the updates of my GPU myself. Installed the remaining 10, completed and has been asked to restart my PC.

  The problems starts here; I am more able to start windows.

  It is past the bios screen, shows the blue flag with a circle of rotation below and then... nothing more than a black screen and my screen goes to mode 'sleep'.

  I tried to start in safe mode minimum clean using a prompt (bcdedit/set {default} safeboot) repair my installation disk option, but it does not start even in safe mode.

  I run system restore turned on so that the option is not valid for me.

  The system is now check the disk for errors, but it seems to hang there as well as happens for more than 2 hours now...

  Any way that I can return the updates of windows on the outside? Any other suggestions than the reset of the installation disc?

  Spec: Evga x 58 classified 3, Intel Core i7 950, 2 x Geforce GTX 580 in SLI, 12 GB Corsair Dominator GT DDR3, Corsair Force 3 SSD 128 gb, Dell u2711 2560 x 1440. Win Pro 8 x 64, completely up to date with the latest drivers. PC worked perfectly up to this Point.

  Disappointed that the "major updates" Microsoft kills my work machine.

  Problem solved now and it was the update of KB2808735 who was / is the origin of the problem.

  I placed my SSD into another computer and was able to pull up in SafeMode off and remove the updates.

  Installed all the updates one by one until it chrashed again installing the update mentioned above.

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• FF does not start. FF does not work on any other user accounts on this computer, but it works fine on another pc on our home network. Thanks for any help you can offer.

  The computer is a HP Envy 17 laptop. Firefox does not appear on the list of the Manager of process tasks or applications. System Restore has not fixed the problem. Google Chrome works well. Internet Explorer works well until I tried to download Firefox. Then it crashes too. This pc work Firefox very well since I bought it 10 months ago. I upgraded FF3 4 then 5 with no problems. All of a sudden yesterday it stopped working. There is no error message and of course FF does not start because there is no list of Firefox in the process tasks or applications Manager. I tried to uninstall Firefox, then tried to download usingInternet explore, but when I click on the download button on the site of Mozilla, Internet Explorer crashes. I did a system restore to 16/08/11 when Firefox was still working. This restored the program but it still does not work. Google Chrome seems to work very well. My internet access is through wifi via a Verizon Fios Actiontec router. I use Symantec Endpoint Protection against the virus and make having all programs Norton or Skype do not appear in the Panel. My pc is set for automatic updates from Microsoft and HP. They both say that my software is up to date. Y at - it a fix for this problem or is it a sinister plot by Microsoft to force us to use Internet Explorer?

  Download Firefox using some other browser (Chrome, Safari, IE) of one of the mirrors here:

  • http://www.Mozilla.org/community/mirrors.html

  Uninstalling Firefox

  • https://support.Mozilla.com/en-us/KB/uninstalling%20firefox
  • DO NOT SELECT DELETE THE SETTINGS AND DATA OF THE USER

  Install Firefox on Windows

  • https://support.Mozilla.com/en-us/KB/installing%20firefox%20on%20Windows

  Check and tell if its working.

• my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  Hi Lynn,

  What mail client do you use?

  Using Windows Live Mail or Outlook?

  For Windows Live Mail:

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

  For Outlook:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  If you are not using one of the people then please let us know what you use so that we can help you further.

• When I start my computer, it does not ask for my password and it does this since I got it!

  Hello! I had a bit of problem my computer! Every time I have start or restart, it does not ask for my password! I have a big family and I only used of the on my account! I got the editable or something like that! I mean I can delete others has put some programs and all that! But when I start my computer, it does not ask for my password! Just open on my account! I already try to reset a password and everything and it does not work! But when come from my screen saver and I want to go she it ask for my password and it is normal that is what I want and when I she ask for my password, but if I restart or close and open it again it open on my account so EVERYONE can go on it! So please help me! Thanks to all the people who read this and thank you to all who will help me!

  Hello mk_wolf_69,

  Please see the link below with respect to automatic logon.

  How to enable the automatic logon in Windows XP

  http://support.Microsoft.com/kb/315231

• My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

  After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

  A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

  Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

  Thanks for your help.

  Hi DaGeLi,

  · Provide us with the complete message you receive.

  Follow the methods below:

  Method 1:

  You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  Method 2:

  If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

  How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

  Otherwise, you may need to make the boot floppies. See the link for the procedure below:

  http://support.Microsoft.com/kb/310994

  You can also contact the manufacturer of the system to get the Windows XP CD.

  For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/