B40-30 screen fades on W10 when the power cable is plugged

Similar Questions

• NB200 abandoned wireless connection when the power cable is plugged

  ALL ideas welcome, my notebook NB200 drops Wi - Fi when it's attached power alternative, on another forum, someone suggested I could change the power settings to avoid this problem, but not how, all ideas welcome, thanks
  kazz45

  > I found the power options, but all that it gives me a choice of power management, which is energy-saving Toshiba which corresponds to the current setting, I see nothing wireless on the tabs it?

  You must discover the power plan that is used when the power adapter is attached.
  Then, you click on change the power plan settings

  New window would be open where you will find an extra option called change advanced power settings

  Now you will see further options. Scroll down the settings of the wireless adapter and make sure both options are set on the performance

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Try to detect when the USB cable is plugged

  I used the USBPortListener to try to get an indication when the USB cable is plugged into the phone, and also when it is cut. The problem is that a single function never gets pulled, and that is 'getChannel', whenever I have data on the connection.

  Obviously, I must have been a misunderstanding on how to use this listener, but I woud take "wired" lights whenever the cable is plugged in, even with "disconnected".

  I think you want to use a system for this listener

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management

• Satellite P300-173 never off when the ethernet cable is plugged or WIFI

  Hello

  I can't stop my P300 correctly.

  Whenever the ethernet cable is plugged or wifi is connected, stop work until the screen goes black but the power remains on: fan, always active LEDs. The only way to stop then is to press the power button.

  As the network is always connected, it's really annoying.

  Can you please help?

  Thank you!

  ER

  Hello

  Very strange problem
  First have you checked if you use the latest version of the BIOS?
  Please check this!

  On the European driver Toshiba page you will always find the latest BIOS and divers.

  Secondly, I would recommend disabling more upward on LAN option in the BIOS and in properties (device-> LAN properties-> Advanced tab management) LAN card

  Check if this may help solve this problem

• Satellite A120: Microphone does not work when the power cable is unplugged

  I have a Toshiba Satellite Pro A120, which has just begun to play up...

  I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.

  Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.

  I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.

  Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.

  It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.

  I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !

  One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.

  I also reinstalled my sound card drivers.

  It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.

  Try to update the BIOS.

  If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)

• His acute appears when the power adapter is plugged into satellite

  Hello

  My laptop is four days old, but when I use it and the power adapter is connected and provide electricity, a steep, low sound volume is issued from the fan area. When I remove the adapter it disappears usually, but sometimes intermittently returns in the form of a stuttering occasional, typically when I use many processor programs.

  I also noticed that, if the sound is not present and yet I increase the brightness of the screen in the properties of the TOSHIBA power saver, he'll be back with a vengeance. In addition, the power supply makes the same buzz, but at least I can sit several feet from it.

  Can someone therefore please tell me if this buzz / your electronic is normal, or if there is something I can do to prevent it being issued?

  Thanks for any help.

  [email protected]

  Hello

  I think you should contact your dealer / ASP with this problem. It seems to me that there is some sort of component inside the PC that generates this noise when the processor speed is high.
  Also if the power adapter is buzzing, you must show this to them as well.

  It does not seem right that the unit should behave like that.

  BR

  Tom

• Satellite M105-S3074 - blue light flashes when the power supply cord plugged

  I have a Satellite M105-S3074 that when I plug in the power cord the blue left flashes just light and unit will not feed. When I unplug it from the laptop all lights go out and it is will not help here please

  Thank you

  Hello

  This means that your mobile doesn t boot with AC/DC adapter and AC/DC adapter too?
  Really strange what s

  Have you tried to remove the battery and the AC adapter? If you remove the two you should an hour and then reconnect the two. Maybe it will work.

  If this isn't the case, it seems to be a hardware problem. You must contact an authorized service provider, you can give them a call to speak to a technician.

• Satellite Pro U400 freezes sometimes when the power cord is plugged

  Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

  I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

  Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

  It tends to occur more frequently when the low battery alarm has rung;
  (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
  (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
  (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
  (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
  (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
  (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

  Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

  Hello

  First of all, I never heard a driver from the motherboard.
  There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

  Look, man. laptop should work fine even the AC adapter is connected or not connected
  If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
  You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

  First of all the memory modules and AC adapter must be verified.
  If the problem persists even using new modules and AC adapter, motherboard may be affected.

• T460 touchpad responds liked when the Ethernet cable is plugged

  Hello

  I bought a brand new ThinkPad T460 ten days ago and I noticed that when I plug in an Ethernet cable, the touchpad responds: just a few clicks and taps are missed, the movement is slow and and sometimes temporarily blocked. The touchpad comes alive again as soon as the Ethernet cable is disconnected. The trackpoint and trackpoint button above the touchpad are not affected, only the touchpad starts to misbehave.

  This happens on both Windows and Linux, this isn't a problem of specific operating system. Furthermore, I checked to see if I am running the latest version of the BIOS, and I am. And there are no problems when you use the wireless adapter, but one of the reasons why I bought a ThinkPad was she has a port Ethernet, so not being able to use it would be extremely disappointing.

  I checked to see if there are any IRQ conflicts for the touchpad, but could find none. The problem occurs when the computer is plugged in and when it runs on battery only. I also tried two different cables in the same router, each in a different router port, and the problem persisted.

  I'm using the latest drivers for Windows 7 directly on the Lenovo site, and Arch Linux with kernel 4.4.5 - the Ethernet card is considered:

  e1000e [2.751703]: Intel® PRO/1000 3.2.6 - k network driver
  e1000e [2.751705]: Copyright (c) Intel Corporation 1999-2015.

  Should I expect it is fixed with a BIOS update, or do I have to contact guarantee? It is unacceptable to live with it.

  Tried in another House as promised, and the touchpad works very well with cable Ethernet is plugged. Also, before you leave the House with the problem, I discovered that the problem occurs only when the cable from my ISP switch is plugged into my router.

  Respect my opinion that this machine deserves a stronger touchpad, but apparently is not due to lack of computer - under normal circumstances, there is no problem with the touchpad.

  I'm stumped on how to proceed. Can I use a multimeter on the ISP switch from cable, but I'm not sure what to check (voltage? how does and between what son?). I'll also look into the suggestion of ferrite, I don't know where they are available - this thread is first heard of them.

  Anyway, I wanted to just erase Lenovo name on it.

• T400 crashes when the power adapter is plugged into it.

  Here's yet another problem with my T400 $ 100.

  When my T400 is plugged into a/c I start it, it freezes and keeps it restart.

  When it works on battery it seems to work ok.

  When the battery begins to flow and I plug in the adaprter of a/c automatically freezes.

  It's a 20 V Lenovo adapter 65W. FRU 42 T 5283.

  Could there be a problem with the adapter?

  ervink,

  According to your MTM: 7417RH4, the compatible Planar for your system as follows.

  -60Y3751
  -63Y1189

  hope that helps.

• MB Pro restarts randomly with the ethernet cable is plugged

  I recently bought a thunderbolt reduction - Ethernet [1] and it works very well. The problem is that when it is plugged in, my MacBook Pro (13', 2015, i5, 8 GB) gets very hot. This isn't a problem, but the next thing is really annoying.

  Whenever I'm not load, but the ethernet cable is connected, and MacBook goes into sleep mode, the system turns off instead. Thus, for example, when I don't have the power cable and if go for 5 minutes, the system automatically sets the mode 'sleep'. When I come back, it is turned off, and when I hit the power button, a black screen with the Apple logo and a text in several languages, saying that the system restarted because of a problem. After that, MacBook starts normally.

  The same phenomenon occurs:

  • When the power cable is not connected and I close the screen
  • When the power cable is not connected and I SLEEP manually the MacBook
  • When the screen is closed and I plug the power or the ethernet cable

  I use OS X 10.11.

  [1]: shot of lightning-Ethernet reduction ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

  The SMC reset may help:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• computer goes to sleep as soon as the ethernet cable is plugged in and don't wake up

  When the ethernet cable is plugged into my pc, it immediately goes to sleep and don't wake up without a difficult start. As long as the cable is connected, the computer will not load windows, immediately go to sleep before my desktop appears. My laptop is connected wirelessly without any problems at all and when connected with a cable, no problem either. ISP says it's a pc no matter not a modem problem, there is a conflict, but they don't know where.

  I am running windows Vista Home Basic, a cisco modem, do not know what model.

  Any help would be appreciated.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to check the parameters of the power management of the device on the network adapter.

  To correct the settings please follow these steps.

  (a) click Start, type device in the box start the search and then click on Device Manager in the programs list.

  (b) in the user account control dialog box, click continue.

  (c) in Device Manager, expand network adapters.

  (d) right click on the network driver and then click Properties.

  (e) click the power management tab.

  (f) click to uncheck the checkbox allow the computer to turn off this device to save power , and then click OK. If the option is checked, then uncheck the option and apply the settings.

  Once you have performed the steps, restart the computer so that the changes take effect, and then check the result.

  Hope this information is useful.

• Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

  Hi all
  I have a laptop Toshiba Equium A60 which now extends for less than a year.
  I am running WinXp Sp2

  Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

  I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

  Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

  It works well in Safe mode and doesn't crash.

  I updated the driver but and it's always the same.

  I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

  When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

  This could be a problem with my cable?
  Help, please... Any ideas?

  Thank you for the charges,
  Shay

  Hello

  If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.