B50-30 black screen, no mouse, keyboard or slider at the start of Windows 8

Similar Questions

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• World of Warcraft Launcher "screen freezes, mouse & keyboard»

  I have two accounts North American & European World of Warcraft & loaded on my comp. previously Ive a had no trouble to have access to the either. Now, the European launcher 'freezes' my beginning of solange screen my mouse & keyboard are also frozen, I have to re-boot because I can't do anything. I have carried out a diagnosis of the system and saw there are programs/conflicts/sharing items.

  Any thoughts? & How to resolve these conflicts? I have run Avast Anti-virus, but turn it off for the launch, but same problem persists.

  These are:

  (resources)                                               (Device)

  Bus i/o PCI Port 0 x 00000000-0x00000CF7, Direct memory access controller

  Port of e/s 0x000003C0-0x000003DF VIA CPU to AGP RADEON 9000 SERIES

  IRQ 21 VIA Rev 5 or later USB Universal Host Controller

  IRQ 21 Standard PCI enhanced USB host controller

  PCI bus memory address 0xA0000-0xBFFFF, VIA CPU to AGP Controller, RADEON 9000 SERIES

  Port of e/s 0x000003B0-0x000003BB VIA CPU to AGP RADEON 9000 SERIES

  Hi Rastifann,

  ·         Did you do changes on the computer before the show?

  If the problem occurred after making all changes, then you can check and restore the system.

   

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  You can also contact the game support for help on the issue.

  Let us know if that helps.

• Black screen with mouse pointer count on reboot after installing SP3

  I tried to install Service Pack 3 on a PC running XP Home Edition (new installation).

  Although Microsoft Update has finished installing SP3 and the computer reboots, I get the XP installation screen base with the message "Please wait...". ", which disappears after a few seconds, leaving me with a black screen with only the mouse pointer.

  The mouse pointer moves then the PC broke down, well that no matter how long I leave nothing happens.

  I tried to uninstall SP3 and do it again (when I Uninstall SP3, Windows starts very well) and also uninstall SP3 as well as my Antivirus and try the installation again. But whenever I'm just left whit black screen.

  Try to update with the custom option.  I had problems like this before.  Usually you are missing a driver or something of this kind that makes you hang.  To update while the custom option, with the exception of SP3.  Reboot several times the installation of updates with the "Custom" option  Once all updates have been installed except SP3, you can try SP3 and see what happens.  This usually takes care of it when I have the same problem. Serving the community one computer at a time www.therushvillecomputerguy.com please post a reply to let us know whether or not our response helped.

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

  My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

  Read this:

  Get help with audio, video, or power on Apple TV - Apple Support

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• boots of the machine to a black screen with cursor flashing by intermittently does not start.

  Original title: slow start, get a black screen and a space bar flashing sometimes it starts not at all and I have to hard start loaded operating system and any backup disc

  slow start, get a black screen and a space bar flashing, sometimes it does not start and I have to hard start loaded operating system and don't back up drive all ides other than buying an upgrade... Please

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/kb/314503

• everytime I open my files in HDR pro it gives me a black screen and my lightroom not gives me the possibility of HDR?

  whenever I try to use my HDR pro it gives me a black screen and lr does not give me the HDR option

  Hi cheryld,.

  Please update the drivers of graphics processor on the manufacturing site, also the Version of Photoshop to 2015.1.2.

  Photoshop CC 2015.1.2 update now available

  And you need to select several images in Lightroom > menu photo > edit in > merge HDR Pro in Photoshop.

  Kind regards

  Mohit

• Is it possible to lock the start of Windows 8 on a monitor screen while accessing the office on another?

  Running HP EliteBook 8560w using the screen of the laptop and HP 2709 m as second screen; running Windows 8 x 64. I try to add a third monitor if it is possible to lock the start of Windows 8 on one screen.

  Thank you

  No, it is not possible then.

  But, if she were here, it would have been a great feature.

  Concerning

• B50 - 30 - black screen when starting since installing Windows 10

  Hello. I use a laptop Touch B50-30 Energy Star. It came with Windows 8.1. Recently, it is automatically promoted to the 10 Windows (which I really like). Unfortunately, since the upgrade, when I press the power button / the Lenovo logo appears on the screen, and then everything goes black and stays like that until I turn the power and then restart with the power again button.

  Does anyone else have this problem or if you did, how solve you this problem?

  Thanks Big Time

  deadhead1155

  Mod edit: System model added to the subject line to improve visibility / clarity

  Have you tried to use the brightness (f11 and f12) keys? In my case they have started working in the opposite direction, so by pressing f11 lights up the screen and f12 it fades. The opposite of what to do...

• After loging in I end up with a black screen and mouse

  whenever I turn on my computer it starts as normal until it come to the login screen, I log in and the welcome screen come but after that I end up with a black screen and a mouse. I tried to stop programs from starting when windows does and have even deleted some programs that I thought that maybe boging my computer down when starting upwards. I ran out of other things to do.

  Thank you:

  Trevor

  I think the problem could have solved its auto but thatks for assistance. If it come back I'll for shure back to you.

  Thank you

  Trevor

• Windows Vista does start with a black screen no mouse pointer.

  When I try to load vista is going just a black screen... the little green bar moves and jumps, then black screen. I am able to run in safe mode and I try to run notron and I get and internal program error code: 0x8007045a.  I can't connect to the internet as well as in the safe, do not know if this is normal. I doint at currintly run a restore in safe mode to see what happens.i am able to run the Startup Repair tool, but it does not solve the problem. If I bring the details of the problem, that's what I get

  problem event name: Startup Repair v2
  signature of the problem 01: auto failover
  signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  problem signature 03:6
  problem signature 04:262148
  signature of the problem 05: no root cuase
  signature of the 06 problem: no cause root
  problem signature 07:0
  signature of issue 08: 1
  signature of the 09 problem: System Restore
  problem signature 10:0
  OS version 6.0.6000.2.0.0.2561.
  locale ID: 1033

  Try to start in safe mode and in the type of research start devmgmt.msc and press ENTER.
  In Device Manager expand adapter screen and try to turn off the graphics card and verify if you are able to boot into normal mode.

  Also try to access http://support.microsoft.com/kb/929135

  Follow the steps described in the article and see if you can boot into normal mode.

  Hope this helps you solve the problem.

  Concerning

  Srini

• Black screen and a text is vague on the Satellite L series

  Hello

  I searched through all the post in this section and I am also one of the many users who bought a Toshiba laptop computer that dosent work.
  It turns on and then gives a black screen with text to disk error very small text, almost not visible at all.

  I don't know what to do, have tried all these things normal, but to no avail.
  Annoyingly, I see a lot of people with the same problem that post discussions here.
  Nobody seemed to be able to view a solution, the only suggestion is to take it to a maintenance shop.

  Someone at - there a solution or is it just bad quality products in general?

  astapasta.

  Hello buddy

  Be a little realistic. The description of your problem is so bad that I do not understand your problem.
  You didn't write what model of laptop you have, you didn't write what you did with your laptop, you didn t write what text error is displayed. With short words: none of the useful information in your ad.

  As I see you have found only two people with similar problem although no one knows exactly what is your problem.

  So if you want to discuss here on this issue be so kind and explain exactly what is happening with your laptop. Another solution is to visit the nearest service. It is easier to understand the problem if the laptop is placed in front of you.