B570 computer laptop HDMI port

I would like to know if the HDMI port on my laptop B570 is an input or an output port. I would like to use my laptop to

play three ps3 games from my system so that the tv can be used by another Member of my family. Please answer as soon as possible.

Welcome to the community of Lenovo!

The HDMI port is output only.

Tags: Lenovo Notebooks

Similar Questions

  • DVI tv connects to the computer laptop hdmi.

    Hey guys,.

    I need help because my TV display my laptop.  My laptop is a HP Pavilion dv4 Entertainment PC 64-bit and has a hdmi port (no vga or dvi port).  It is partitioned into Windows 7 (which is my primary OS) and Windows Vista 64-bit (what can I say, retro gaming).  My TV actually by JVC and a dvi port (but no hdmi or vga port).  I also have a hdmi cable to dvi to connect my two devices.

    I tried everything imaginable:

    I've updated my display drivers.

    I made sure that my TV was on the plug-in software component Digitial parameter (tried all other inputs too and those who does not either).

    I tried all the settings in the "Display" section in the Contral Panel.

    I tried all the settings in my 'Intel Graphics and Media Control Panel '.

    My Fn + F4 options also don't make my TV display my laptop.

    I even had my motherboard replaced this year (for a problem of differnet of course).

    I tried every resolution of the screen to find one that is compatiable with my TV.

    I changed the order in which I turn on my two devices, including when I plug my cable to my laptop.

    However, I discover that my Windows Update does not update my windows for some reason any (the update was for a problem with Internet Explorer 9, so it's unrelated)

    But here's the strange thing: my TV can display my laptop when Windows starts up.  My TV will show the start screen where I decide what OS I want (I usually choose Windows 7) and it will display the Windows loading screen after that.  But then it becomes empty when screen dsiplays users.  The only thing I can think is that something is leading to the digital output of my laptop once windows loads.  I don't know what would make this, so if anyone has any ideas I could really use the help.

    Hello

    When you connect a new monitor or TV to Windows 7, it should ask you what you want to do with it in a group called "New display detected." It is an opportunity to adjust the settings as you please and turn on mirroring. If you want to adjust these settings later, you just need to go to the start menu and select Control Panel. When the load control panel, click display. On the left side, you will see a few options. Click "Edit settings." From there, you will be able to make changes as needed.

    Connect your computer to a TV

    http://Windows.Microsoft.com/is-is/Windows7/connect-your-computer-to-a-TV

    Run this Microsoft fixit tools and check if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

  • U2515H, computer laptop HDMI 1.3, resolution 2048 x 1152?

    Hi guys,.

    I recently bought a Dell U2515H and connect via the HDMI port on my laptop, however, couldn't the scope of maximum resolution is 2048 x 1152. The HDMI port on my laptop is 1.3 and cable, I don't really know his spec. My VGA is AMD HD6570M. So, what's the problem? Please help me.

    HDMI U2515H in the port is 1.4. Page 12 = user guide

    The laptop HDMI output port must be 1.4 to support 2560 x 1440 60 Hz. 2048 x 1152 is the maximum for HDMI 1.3.

  • How can I connect my thunderbolt display to a computer laptop hdmi

    Hello. I the thunderbolt 27 "screen. I want to connect to an asus laptop that has port minidisplayport and hdmi. Can this thunderbolt display to connect to a regular port hdmi output of your laptop? Because I couldn't find any converter to do this and I don't know what to do.

    N ° the computer must have a port Thunderbolt. There is no way to add a Thunderbolt port to a computer. Love at first sight is built into the logic board

  • HP Pavilion dv7 Notebook PC: computer laptop HDMI to the TV does not

    I have a monitor of Vizio that I was able to connect to my laptop via a HDMI cable last month.  I did it several times without any problems, but less than a month later I tried to do it again and it does not work.  The monitor says there is no signal, whereas before it was a direct connection.  I don't know what happened.  Help.

    @ALN74,

    Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  • Upgrade laptop XP on the new home network. Shared for laptop drives. Now computer laptop poster not the zip drives that I plug into the USB ports.

    I have a xp desktop machine, an external hard drive, computer laptop xp and a computer laptop win7 on a network home via my Lynksys wireless router.  My friend attached external desktop.  Then shared these discs on the network.  He shared them as drives E and F.  I can access these drives very well.  The problem is that on the computer laptop xp now when I click on my computer if there is no zip drives or anything else connected to the computer laptop USB ports it does not show them.  If I go into Device Manager, it shows the mass storage device connected here.

    Another thing.  If external that are shared and the desktop machine is turned off the coast, I can click the icon to the desktop and it displays the zip drive, that I plugged.  It's like I need to rename or remap something?

    Hi crazypainter,

    When you plugin your USB device, just follow the following process:

    Rigth click my computer-> manage-> disk management.

    You will find your hard drive, cd and USB dirve listed player, you can do a right click on the drive letter and click on modify.

  • No HDMI / no monitor detected on HDMI port

    Hello

    I have a new Inspiron One 2330 on Windows 8 OS

    I tried to connect my LG TV to my computer via HDMI port, but it seems that the computer either is not out

    signal through HDMI or recognize I have connected my TV. (in the order.. screen display resolution Panel... I support on detect I get 'another display not detected)

    any ideas on how to use my TV, so I can output / watch movies

    tanks you!

    YEGER

    The best option is VGA output of the computer to the TV. But you will need a stereo audio cable separated from Sockets RCA l/r to your TV.

  • Pavilion dv7t-4000 laptop: AMD HDMI port on the computer laptop dv7 is lost after free trial Win10 returns to Win7 Home Premium edition

    My laptop was purchased in sept 2010 and runs Win7 Home Premium Edition (64-bit).

    It worked perfectly until June 2016, when the trial version free odious Win10 forced itself on my laptop.  I had no choice, I used Win10 for a day or 2 and then discovered that:

    (1) I lost the audio capability, HDMI port, I use to connect to my TV, and

    (2) the Win10 trial enabled me to return on Win7, I did without delay.

    In my Win 7 restored, everything was fine, except when I have her go in Control Panel to configure / reconfigure HDMI as the default, I couldn't - the element used to appear as "AMD HDMI Audio" is no longer displayed.  I remember a message during the free trial period Win10 that says it has disabled any material incompatible.  Without a doubt, Win10 free trial 'killed' this HDMI/device port, at least audio-wise.

    Today, I always run the same Win7, but I can't have audio HDMI on this port.  When I connect to my TV, the video works.  Win7 Device Manager it shows with an exclamation in yellow, and when I right click to get more details, there is a message saying Microsoft:

    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52).

    Is there a way to 'get it '?  'this' is AMD HDMI audio.  (and wthout spoil the graphics - that is, video)

    I tried to install the drivers provided by AMD [graphics] and that did not work. The Internet from AMD website says that the audio drivers are included in the package for graphics drivers.  There is also a huge confusion in the way these low level items are named/described: ATI and AMD, because they have merged, were used somewhat interchangeably.  I also tried the graphics drivers AMD HP Support Web site specific to my laptop and it has only gotten worse.

    Thank you for your kind attention.

    Hi @ RTX,

    Awesome response. I read the details and depth of your post. I understand that the bios is updated. So you could end up with this update.

    Happens to the other updates. This will be the order.

    1. Uninstalling the driver Chipset and resettlement.

    2 reinstalling and uninstalling graphics drivers

    3. uninstall the sound drivers and reinstall.

    Before uninstalling, you can try to update the drivers supplied by device also Manager and if that market that will be great. Please, do it only if you don't have already done.

    Before uninstalling please make sure that you capture an image of the complete Device Manager window. Take some pictures of your cell phone. Please note the exact device for audio and video chipset drivers. Then, you will need to uninstall it from the Device Manager and install from the support site in the above order so that there is no confusion.

    If nothing works as a last resort, you may need to restore complete system to factory settings. Please backup your files before doing so. This is possible since the recovery of your computer's hard drive partition.

    Link to the system recovery: http://support.hp.com/us-en/product/HP-Pavilion-dv7-Entertainment-Notebook-PC-series/4284279/model/4221688/document/c01867418/

    Please hold me. I hope that it pans well.

    Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Now carefully and have a wonderful week ahead.

  • How to connect my laptop via HDMI port to my TV + VGA of Propjector port

    Product number: C6K18EA #ABU, Windows8,.

    I need to connect laptop new mu via its HDMI port to a VGA port on my TV and a projector (at different times),

    I have a cable that connects the VGA port and HDMI port, but the computer does not see the TV or projector.

    Kind regards

    Stewart

    I understand now.

    I'm sorry.

    You must purchase a digital receiver.

    HDMI to VGA.

    This link show how to knit.

    http://www.YouTube.com/watch?v=PCFYSB0g-I8

    A picture of this cable.

    http://cdn100.iofferphoto.com/img3/item/509/259/340/HDMI-male-to-VGA-female-adapter-cable-HDMI-cable-2980.jpg?visavale

    att Cristian.

    If this answer help you click in congratulations to the tanks.

    If you have further questions click Accept as a Solution to close this case.

    Tank you.

  • After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

    Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

    • HDMI port does not when I connect the laptop to my led tv
    • In the windows operating system sleep mode is dissappers.
    • On the start menu, the language is Hindi

    There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

    Hello

    As mentioned above, restoring Windows 8 will allow:

    http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

    Good luck.

  • HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

    Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

    Hi Lyn11,

    Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

    • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
    • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
    • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
    • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

    Please visit these links which may provide more useful information.

    Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

    Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

    I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

    Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Now carefully and have a wonderful week ahead.

  • Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

    Hello

    I searched online on several sites and read the messages on this forum too but still could not find a solution that works.
    I plugged in the cable and instantly got video but no sound. This cable works fine with my PS3.

    I tried to set the audio device by default both HDMI and S/PDIF and reboot after each time, but it doesn't work!
    Also, when I choose HDMI as device and try clicking on the Test, I get an error message saying "cannot play the test tone".

    I checked for updates for the driver through Windows and it is said that there are no updates. I have a Satellite P300 laptop.

    Anyone have any ideas?

    Thank you
    Jen

    This means you have a perfect television image after activating the HDMI port but the problem is its only?

  • Computer laptop HP Envy 17 - USB Ports not working not

    Product: HP Envy 17 Notebook PC

    Operating system: Windows 8.1

    When I try and use the USB ports on my laptop, the system recognizes not the device is connected, or allows the unit to operate. There is no error message and device icon to remove safetly does not appear. This problem started after I ran a few Windows updates before turning off my computer for the night.

    The devices worked normally before but have stopped since then. Several devices have been tried, but to no avail.

    Dear customer,

    Welcome to the Support Forum HP and we are happy to help you.

    Looks like that the USB Ports have stopped working on your laptop and your need help

    We will surely help you with this question at the earliest

    I'd like to request you to perform the REFRESH of your laptop back to a previous state

    When everything worked well and normal

    Step 01. Please go to settings on your laptop computer laptop

    Step 02. Select the general tab on the left side

    Step 03. Click on "refresh your PC without affecting your files.

    Step 04. Follow the prompts on the screen to complete the refresh/system restore

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • HP Pavilion G7 1070US: need help to identify the version of my laptop's HDMI port

    Hello!

    I'm trying to identify the version of my laptop's HDMI port. The reason for this is - a product that I'm shoping requires the version of HDMI 1.3 port and it does not support version 1.4. My laptop is HP Pavilion G7 1070US and product number is

    LF156UA #ABA

    Thank you for your help.

    Thanks for a quick and helpful response. That helped a lot.

  • How to connect my computer laptop advent for my toshiba tv through hdmi cable.

    Please if anyone can help me with this

    I bought a hdmi cable to connect my computer laptop advent for my toshiba tv.

    BIG PROBLEM

    I don't understand the settings.    Call me thick but I was actually tryng to fix this for 2 months

    I am litrely to the point of screaming and ready to throw the laptop and the tv out the window (WHO COULD BE A SHAME REALLY SEE HOW I AM not ACTUALLY THE TV)

    If someone could be so kind as to help and to unmask how and what I have to press on and what to implement in what concerns the settings, I would be so gratefull thanks michelle smith

    Hi michellesmithozzyand,

    I suggest you follow the link given suggestions and check that it works.

    http://Windows.Microsoft.com/en-in/Windows7/connect-your-computer-to-a-TV

    Hope the helps of information.

Maybe you are looking for

  • Satellite Pro S300-12O - Sound Forge 8 does not

    Hi guys out there, I hope someone here can give me some advice. First of all, I have a laptop Toshiba S300-12O bought in January. I downgraded to XP Pro via upgrade disk lower.I had zero problems until recently when I installed Sony Sound Forge 8 on

  • Connection on BIS

    Hey all,. I have a question. Is it possible that a BB device is only connect via BIS of the carrier. A client of me tells me that the application is unable to connect. And do not use BIS because I'm not a member of the alliance. What can I do? What s

  • Too many?

    Hello, in my application I am multiplying extremely large numbers. The product of these numbers when converted to a string and displayed to the user are in one of these formats: #1 201.16800 * 0.00000000000668458134 = 1.34472385900512e - 9 #2 9999999

  • same host for radius and Ganymede

    Hello can I put a host (asa for example) twice in the acs Server? one for Ganymede to grant administrators access exec and the other for radius authenticate remote users. I don't want remote users to be able to get exec mode. Or how should I configur

  • How to clear an hp laser jet m1217nfw that is stuck on initializing

    printer flashing and stuck on initializing