backed up files in windows7 for vista
can I recover files saved in windows 7 and get back them on my computer that I reinstalled vista on?
Hi Jim,.
1. you say that want to restore the backup on the same computer that has Windows vista installed?
I suggest you to visit the following links for more information about backup and restore of windows.
http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
http://support.Microsoft.com/kb/970914
Tags: Windows
Similar Questions
-
After the upgrade to vista sp2, about 8 GB of sbace is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?
Hello
see if this program helps you to determine what is take up space
http://www.Jam-software.com/treesize_personal/
by default system restore will have up to 15% of the capacity of the hard disk
you would like to reduce this amount
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.vista4beginners.com/system-restore-space-used
also use disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:
Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.
System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.
also scan for malware
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
and read these information from microsoft on windows optimization
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
-
Satellite A300-145 back still not update the display drivers for Vista 32
(1) Intel published the new driver for internal and accelerator graphic GM965 Express X 3100 integrated in Toshiba Satellite A300-145
http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProductID=2879&DwnldID=1693 9 & lang = fra
new version is 15.11.2 for Vista 32, but this Milkeficent I can not install - program say that ' it's driver is not check for you unit - call to make the device "-what is a problem?
but on [to Vista drivers Toshiba support page: http://ru.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action = search & SelCategorie = 2 & selFamily = 2 & selSeries = 153 & selProduct = 781 & selShortMod = 694 & selOS = 26 & selTyp e = 11 & country = 30 & language = 34 & search =]
still OLDER version 7.14.10.1329 (without OpenGL 2.0 support)
-When can I update my display driver for version 15.11.2?(3) as the 3Dmark Vantage you say "back to video card not supported DirectX 10" - what is a problem?
Toshiba Satellite A300-145 (PSAJ0E)
:(
Thank you all!
Hello
Is this your first laptop?
-
Tecra M7: Vista 'Open file security warning' for Alptec pointing device .exe files
I gritted my teeth and updated my M7 for Vista Ultimate Friday. Overall I am very happy with the results. I have stripped the machine of all Toshiba drivers before installation and then re-installed all Vista drivers afterwards.
Everything seems to be OK aside, whenever I boot, I get the following errors when the device pointing Alptec drivers load: open file security warning - the Publisher could not be verified.
Are you sure you want to run this program? The file is: C:\Porgram Files\Apoint2k\appoint.exe, then the same thing for: c:\Popram Files\Apoint2K\ApmsgFWD.exe and C:\Program Files\Apntex.exe. I click "Run" on each of the applications and uncheck the button "always Me ask."It makes no difference and every time that I reboot, I get the same error. If anyone has had this problem, and if so, do you know how to fix it?
I suspect it is a problem of certificate with Alps Electric Co Ltd and have checked their website and found nothing.
Help much appreciated as always.
Hello
Just a question before we start any discussion here: have you downloaded and installed the drivers, tools and utilities for Toshiba download page in order facilities listed in the instructions facilities document?
BTW: where you have downloaded the pointing device Alptec driver?
-
How to back up files on windows XP for DVR
Went to Accessories, backup and followed the instructions to burn on my DVD data files = CD player. Error message stating the name of this file is incorrect. How can I fill this seemingly simple task?
Hello
What is the accurate and complete error message?
Provide us more specific information on how exactly you try to back up files.
See the article below which might help you.
How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
http://support.Microsoft.com/kb/309340 -
Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?
I use the version of Vista Home Premium.
While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.
There is no log of UAC elevation file.
-
I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance
Original title: Hi can someone help me please. I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix
I understand that you now have returned back to factory settings and have installed all updates except for service packs.
.
You will need to install the required service packs-
How to get the latest Vista Service Pack
http://support.Microsoft.com/kb/935791Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
http://support.Microsoft.com/kb/948343You will need to install SP1 before installing Sp2.
Once your computer is up to date, then you can think of Windows 7
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.
-
original title: sharing of Vista with XP
I'm having a problem of sharing back and forth between xp and vista. I've set up the sharing, but I still get the error message that I don't have permission to access files
Kill / disable the Vista password protection option. If you have installed a separate firewall, configure it.
-
What ISO free. file burner app works for vista 64-bit home Premium
Free ISO here. file burner runs Windows Vista Home Premium 64-bit. I have a desktop HP Touchsmart IQ506t. I tried IMG, burner, CD BurnerXP, I create a disk for Windows 7 enterprise edition. NO file creation ISO probem but they don't burn, but the app said that the burn is successful. Any suggestions
KG
Hello
Try this
-
After having stuck trying to upgrade Windows7 for Windows 10, the system gave back me to Windows 7. Now, I think I lost my Adobe Reader software. I can't open PDF documents.
Use the uninstaller to uninstall, if you can.
clean by Download Adobe Reader and Acrobat tool - Adobe Labs
Restart your computer
Reinstall the reader Adobe Acrobat Reader DC install for all versions
-
If anyone can help with the Please this problem.
Hi handymanken,
1. what operating system do you use?
2. you have made no changes to the computer before the broadcast took place?
Method 1
If you have any security software installed on the computer it would take more time for the backup center to back up files. Try to disable security software and try to make a backup and verify.If it works fine afterwards, enable the security software.
Follow the link for more information
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2
Run the check disk for bad sectors.Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-a-drive-for-errors
http://support.Microsoft.com/kb/315265
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Additional information:
Backup and restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restoreShould what backup settings I use to maximize my disk space?
http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space -
Cannot back up files:, error: access denied code # 0 x 80070005
When I tried to back up files through Windows, a mess of error. said: ' access denied, error 0x80070005 # I always attack I am able to back up files to an external hard drive
Hello
1 do you have full permissions to the files that you are backing up?
Looks like a problem with permissions for me. But first let's try the following steps.
Step 1: If you receive the message that your copy of Windows is not genuine, then try to validate the OS by visiting the following Web site.
Step 2: Try checking the (backup) behavior by following these steps:
(a) you might try to temporarily disable your anti-virus and malware during execution of the backup. If the backup works fine, then you have to search for updates and firewall settings in the security software.
(b) you can also try to disable user account control, while safeguarding.
Reference: http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off
Note: Make sure that you enable user account control and the back of the antivirus on the computer after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.
Step 3: Check to see if there are drive errors that can cause this problem.
Reference: http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Step 4: Put the computer in a clean boot and see if it helps. Follow the instructions in step 1 in the following article. Run the backup and check if that helps.
http://support.Microsoft.com/kb/929135
Note: make sure you put the computer to a Normal startup, once the troubleshooting completed.
Hope this information is useful.
-
Try to load Halo 2 for Vista and get a message that the game could not initialize and that maybe it's because another application of windows live gaming (such as halo 2 dedicated server can run on the same machine). If it's that I did not here. any ideas?
Hi walby,.
This problem can occur for the following reasons:
· A file in the %SystemRoot%\System32\Catroot2 folder is damaged.
· The Cryptographic Services service is disabled.
Try the following steps:
i. first uninstall Halo 2, also uninstall everything related to Windows Live.
II. reinstall halo 2 from scratch
III. start the game normally
IV. then follow the Windows Live installer according to the instructions
v. when the Windows Live Update option comes to update and restart the game.
VI. connect to Windows Live, this will give you an option to update of Halo 2. Follow the instructions
See the links below:
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
http://support.Microsoft.com/default.aspx/KB/941208
With regard to:
Samhrutha G S - Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
Preparation tool update system for Vista
Vista Home premium 32-bit with Vista SP3
Norton Internet Security 2010
back in June 2010, I received an update to run the preparation tool update for Vista system. I ran that tool, but may not have let finish because it took almost an hour with no end... not sure if the tool ran and completed its function. Now, I've read that the process of this tool work can take well over an hour
Anyway, nothing thought up until this last week
I installed Norton Internet Security 2010 last week. I noticed that Norton detected a kind of error with ccSvcHst.exe function program and the error code was
0 x 80070490
which seems to indiacte something wrong with my Vista operating system
I went and made a check of updates from microsoft, but the tool is not yet available
Norton forums suggested that the tool must be run again. I noticed there is a more recent version of the tool (seven 29, 2010) than what I ran in June 2010
ALLOW ME TO NOTE THAT I DON'T HAVE ANY PROBLEM WITH RETRIEVE AND PROCESS THE MICROSOFT UPDATES > UPDATES MICROSOFT INSTALL WITHOUT PROBLEMS
1 should I I manually run the system update readiness tool again? (I now understand that I need to leave him alone and let him finish) I know that the current tool was revised in September 2010.
2. can I cause system problems if I run the tool again?
3. what version of the tool manually should I download and run x 86 vista or vista x 64? MYSYSTEM is vista Home premium 32-bit and a dual core processor
The CheckSUR.log file is the only thing that we really need to look at in this case,
=================================
Preparation of control system was updated.
Binary version 6.0.6002.22441
Version 9.0 package
2010-10-19 18:52Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) CSI shows missing 0 x 00000002 x86_microsoft.windows.common - controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436.manifest x86_microsoft.windows.common - controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436
(f) CSI shows missing 0 x 00000002 x86_microsoft.windows.common - controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest x86_microsoft.windows.common - controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3
(f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20.manifest x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20
(f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639.manifest x86_microsoft-windows-smbserver - v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639Summary:
Seconds executed: 8959
Found 4 errors
CSI shows lack Total count: 2
County CSI shows zero total length: 2Unavailable repair files:
winsxs\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_5.82.6002.18305_none_88f3a38569c2c436.manifest
winsxs\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest
winsxs\manifests\x86_1e90522e2e4de4231127b623210cbca5_31bf3856ad364e35_6.0.6002.22433_none_baa3149870e71a20.manifest
winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v2_31bf3856ad364e35_6.0.6001.22756_none_da4633be0fbc6639.manifestI have an example of how to solve this problem here , but you will need to get the missing files above instead of the ones I have identified for the other user.
-Mike Burr -
My computer didn't work since I installed SP2 for Vista
After installing service pack 2 for Vista my computer restarted itself and everything that appears is the screen with the following message Windows Boot Manager:
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert your Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
File: \Windows\system32\drivers\pci.sys
Status: 0xc0000098
Info: Windows could not load a critical system driver is missing or corrupt.No matter what I do, the computer always comes back to the screen. I tried to insert my installation disc, but the computer does not recognize it. (I have no Vista disks, I have the installation disc that came with my Dell Inspiron E1505 laptop.
Suggestions?
1 make the repair disk Bootable from the info below and do a startup repair.
2 Dell reinstall info.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the restore does not work, do a repair disc to do a Startup Repair:
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
As your falls into the above category: download the ISO on the provided link and do a repair of the disc.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Above information shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista Startup Repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dell recovery options:
Above is Dell to reinstall Vista from the DVD on your computer.
Answer the questions in blue; It is in a sequence.
And that way if you have a recovery partition on your hard drive.
See you soon
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Satellite Pro L300 - how Windows easy transfer on the new HARD drive?
Hello I recently got a broken hard drive of a laptop larger than mine. I would like to put in my computer, but I don't know what would be the way to transfer the partition of installation (or better yet also already installed windows partition). Will
-
Need speaker for portable computer A30 satellite
Hi I recently had a virus and had to reinstall Xp and I had lost the Toshiba reinstall CD so I used a whole simply windows Xp reinstall so I called I have to please the pilots.
-
Very well... I downloaded Justcloud but failed to read the terms and policies. I want either, so I tried to uninstall it by going into the control panel and clicking Add/Remove, but Justcloud would not uninstall. I'm a novice at this and I don't real
-
Monday Nite I downloaded a driver site HTC syn my Android Hero phone. After extracting and installing the driver in the zip file, I tried to sync with my phone which was hook up my laptop. It did not work. Interrupt the synchronization process and I
-
Need help to start with CLI for MD3620i
Hello I'm testing a MD3620i in our environment. I had the installer places some virtual disks through MDSM. I traced one of the virtual disk through to two hosts Now when I try to change the mapping of the disc, I get an error "Error 219 - the operat