Backup in Windows Server 2012 image

Similar Questions

• Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

  Windows Server 2012: unexpected system error and restart w/dump?

  With the software running:

  (a) CA ARCserve Backup version 16.5

  (b) JAVA JDK 1.7.80

  (c) tomcat 7.0.59;

  (d) Symantec Endpoint Protection Version 12.1

  (e) PowerChute Network Shutdown 3. 1.0

  Should I plan to restart (I can only remote access) server for every 2 months?

  Running (without rebooting) non-stop over 6 months ago.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2012 r2 backup

  Hello

  I have a Windows server 2012 r2 and I m using the Windows backup to do the backup of 10 TB, I perform incremental backups, but I have a problem, any windows decides to perform a full backup of random times, he needs 60 hours to do a full backup for this reason, it is a serious problem for my.

  I need to know how to disable this full backup to chance.

  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Image acquisition turns off in Windows Server 2012

  I am running Windows Server 2012.  Kind of a necessity, that I also hosts the website of our company.  All updates are installed, and desktop experience is enabled.  Image acquisition Windows is listed in Services, but was originally set to manual by default.  I tried just to start the service, but it stops automatically after about 30 seconds.  I tried the automatic configuration, but it does not start on its own.  I get no error message, and I checked dependencies, which seem fine departure, because repeatedly referenced in many other assignments.  Fresh ideas?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

  This might be a stupid question.

  We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

  No always thumbnail option.

  You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

  Note: NO GPO is configured to block it. Checked.

  I can't find any object GPO to allow this option to be :)

  More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

  Here, any help will be very appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Customers light rdp to windows server 2012

  Hello

  I have a client with a Windows Server 2003 32-bit server acting as a mail server & DC, but also make nightly backups.

  Users run desktop computers as well as laptops at the office, with some of them (sometimes) connect to the network from remote locations.

  I am currently looking at upgrading their environment, in upgrading the server to 64-bit Windows 2012 and add Thin Clients for desktop users, so they can connect directly to the server that will help reduce overhead costs (such as the failure of HARD drive on desktop computers).

  The question I have is if this Setup will work? Basically, I'm interested in Windows Server 2012 Server Essentials or Standard 64-bit with the necessary amount of RDP CAL this server will run exactly as the server running from 2003, in what will be the domain controller, Exchange server & perform nightly backups. In addition to this, I want to install MS Office with the necessary quantity of licenses.
  However, I would like to know if it will work or if I am looking at a catch which will prevent users to connect to the server? Or office giving problems if Word is open for a user, it will not be open for the user to one another (the same issue with Outlook & Excel etc.)?

  If there is no potential problem that prevents this configuration to work, can someone please point out to me what will be the problem and if there is a solution?

  TIA

  Hey Wil,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  General Forum(Windows Server) Technet

  Hope this information helps.

• How to update the model of RDS for Windows Server 2012 collection?

  Hi team,

  I want to know how to update the collection of RDS model (model master sysprep) which is used to create the collection?

  I tried the below way but did not get the update of the collection of virtual machines.

  -Start the image of mater of sysprep

  -install the required components

  -resysprep the image and stop it

  -East went to the RDS Collection and added new virtual machines in collection (removed the old his)

  Once created, I opened a session in the machines, but I don't see the updates (I installed some software in the sysprep image however and no is not there in the virtual machines in the pool)

  Can someone let me know if I need to create a whole collection again or the way I do it is a proper way? If it's a good way what could be the reason why I get the new installed software model sysprep image in virtual machines created in the pool, based on the model?

  How do we actually updated for security and other regular patches updated in virtual machines? In my view, we use the same approach?

  Any suggestions will be appreciated.

  Kind regards

  original title: Windows Server 2012 RDS - model Sysprep update process and collection of creation

  Hi MS Expert 2010,

   

   

  I wish that you post your question in the TechNet Forums as it is addressed to an audience of it professionals.

   

  Check out the link-

   

   

  TechNet Forums

   

  Hope this helps!

   

• New TS140 - cannot get Windows Server 2012 demo of R2 to install

  Hello

  I recently bought the TS140 and attempted to install the demo of Windows Server 2012 available from Microsoft.  I completed the following steps:

  (1) engraved an image ISO for the demo on a DVD.

  (2) load on startup the thinkserver DVD format the disk, download updates and prepare the installation.

  (3) at the end, I put the DVD in the drive.

  Despite the DVD being burned successfully, the guard TS140 eject the DVD and asking for the disc.  Issues related to the:

  -Someone installed via the demo and can give advice on the process?

  -Is the DVD of the right way to go or should I go with another method as a USB?

  Sorry, I'm use to the insertion of a DVD and occurring start installation.  Try to install after the initial drive of Lenovo is causing me some confusion.

  Thanks for your help!

  First of all, thanks to all for their persistence I managed to do the work.

  Basically, if you download the ISO of the evaluation version, YOU cannot USE the native Windows ISO burner.  When I copied on a drive and had Windows burn, it just don't understand the disc.  However, when I used the Windows store software specially set up the server:

  http://wudt.codeplex.com/

  He worked very simply.  I am extreme newbie, so it was difficult.  If you have purchased a TS140 and try Windows Server, follow these steps:

  (1) copy eval on the Microsoft site.  They have like 10 files to download, but you only need one ISO.  I don't know how the other files.

  (2) use the ISO burner of the Microsoft store - its registered for use with Windows 7 but worked like a charm.

  (3) use the boot (ThinkServer Easystart) disc that comes with your server, or as a recommended download the most recent copy.

  4) go through the steps.

  (5) when you are prompted, insert the new drive of Windows Server R2 2012.

  (6) it must go through the installation.

  Once again, thank you for not giving up, and I hope that my instructions about help an absolute beginner.  Probably simple for experts from the server, but I've never used Windows Server (other than Windows Home Server which was awesome, but abandoned!)

• PowerEdge 1850 - installation of Windows Server 2012

  Hi guys, I have a Poweredge 1850 which I brought cheap on ebay, I use it as a NAS abit to free up space on my iMac and stream movies/music to my computer or via DLNA to my TV and PS3.  I am currently running Ubuntu that I kind of like/dislike, I also like to use my server as abit of a toy game project, and I like to try things, like using a webcam as a security camera which I can access when im etc.  I also use it to connect via ftp to and run Web etc pages.

  Now you know how I like to play with my server please can you help me :(  I want to try a new OS, I don't fear wipeing and start again as I can save on an external HARD drive.  I have a copy of Windows Server 2012 with I think that 30 days free and if I like it will activate.  When I boot from the CD, I get to the bit where it asks an installation location, but I can not find disks for select, I know I probably install the drivers I've tried (whether they are good or not, I don't know) my problem is they are .exe I can't load it as im on my mac:(-je n'avais pas ce problème de localisation deles de lecteurs quand j'ai installé Ubuntu) who find them without problem.

  Is it also possible to do this via VNC, I use remote on my server as I placed it in my garage.  Its abit of an effort to bring it inside more, she is rather noisy.

  A quick, someone could go through how to configure my drives in the bios, because I don't want to use RAID, I rather just have them as two discs rather than with her backup to another.

  Would be very grateful if you could help me with my "little" project (maybe we could both remote in and talk via Skype and do it together: D)

  Kind regards

  PriestyUK

  Yes, 2012 needs pilots, and the only way to get out them of the EXE is to run the EXE to extract the content (or use another tool for extraction).

  If you don't have a Windows machine (or you are not able to do it in a box of Linux/Mac), is not a virtual Windows machine that you can extract it, AND you have access to Server 2008 (not R2), then you can install it with this long enough to get the extracted driver, as pilots PERC 4 are from 2008 (but not later).

  Because Dell can't 2012 on 8G servers, you will need to use the drivers for Server 2008 R2:
  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/Poweredge-1850?driverId=9K3D3&osCode=WS8R2&FILEID=2731109791 (you need the 'hard drive' version)

  The RAID controller integrated to 1850 (PERC 4e/Si) does NOT support so no RAID, in order to use the disks individually, you must configure each disk in a single drive RAID 0.  An alternative would be to disable RAID entirely, that uses only the onboard SCSI controller.  The RAID cache will be more usable with RAID disabled well.

  You configure RAID in the CTRL-M (during POST) utility.  You disable RAID in BIOS (F2), in respect of the integrated devices (CTRL-M will not be accessible when disabled - you use CTRL-A to display the disks).

• Impossible to activate my windows server 2012 R2

  Separated from this thread.

  I can't activate my windows server 2012 R2.

  The report.txt file is as below:

  
  
    6.3.9600.16384
    SL_LICENSING_STATUS_UNLICENSED
    0xC004F014
    SL_GEN_STATE_INVALID_LICENSE
    0
   
    0
    0
   
   
    00252 60123-99162-AA473
    6.3.9600.2.00030110.0.0.007
    Windows Server 2012 R2 Standard
    x 64
    ServerStandard
    9600.winblue_r9.150322 - 1500
    Arabic Standard Time (GMT + 03:00)
   
   
   
   
    06401-02526-012-399162-03-1033-9600.0000-3272014
    Volume: MAK
   
   
    true
    S-1-5-21-1573248090-3356363672-77822838
    1033
    1033
    1033
    SIGNED_INFO_PRS_SIGNED
    fake
   
   
   
    VMware, Inc..
    VMware virtual platform
    20141002054142.000000 + 180
  
  
    PASS
   
  
  
    0xc0000022
  
  

  Can I make an error code is of type access denied - deserted, or maybe one of the system accounts lost its privileges.

  Really, I can only suggest it than other that the restoration of the image, you call the Activation Center and ask for their help. They have the resources to be able to make detailed diagnoses is not available to the public.

• Suspension of consistent application on Windows Server 2012 invited with U2 ESXi 5.0

  We lack ESXi 5.0 U2 (build 1254542) and we are going to have problems making consistent application paused on our virtual machines that are running Windows Server 2012.

  We use Acronis vmProtect, and he throws warnings on our VMS in 2012 on the SQL Writer is not not available.  I contacted the Acronis support and they said that it is a problem with the suspension of consistent application.

  When I take a snapshot of a VM 2012 (verification of the ability to perform a capture instant consistent application) capture instant full fine without errors or warnings.  But when I look at the vss_manifests zip file that is created, there is only a single file (backup.xml) with a single line.

  When I take a snapshot of the suspended application on our virtual machines that are running server 2008, the vss_manifests zip file also contains files for each of the VSS writers.

  I checked the disc. EnableUUID is set to true (the virtual machines created on ESXi 5.0 U2 with Virtual Machine Version 8).  I have even manually it specified.

  I checked that the virtual machines use only SCSI disks (there is only 1 disc) and is not a GPT disk or dynamic within the guest OS.  It is a thin disc put into service, if that matters.

  I checked VMWare Tools is installed on the client, and I tried to reinstall it.

  Is there something else I should look for consistent suspension with applications working on Windows Server 2012?

  What do I need to run ESXi 5.1 for this to work?  (Or could I just install the latest version of VMWare Tools manually?)

  If I have to run ESXi 5.1, 5.0 to 5.1 ESXi licenses are worth?  (We have the 5 Essentials license Server vCenter).

  If I have to run ESXi 5.1, must I also improve our vCenter Server installation of 5 to 5.1?

  Thank you

  We've finally updated to 5.5 and everything seems to work fine now.

• vCenter Simple install on Windows Server 2012

  Hello

  I try to install vCenter with Simple installation on an instance of Windows Server 2012 Standard virtual.

  But the installation completely hangs when installing SQL Server 2008 R2 on the vCenter Single Sign On package installs.

  Progress of the installation comes to: Install_sql_engine_core_inst_Cpu64_Action and a stand for a couple of hours now and no activity of the CPU on this process.

  I will attach a screenshot.

  Its not so bad. I did several times. What to install. Ex: SSO, the inventory Service, vCenter Server and web client is enough car radio.

  Well, I would consider making the following if you have an existing database of VC.

  -Take the DB backup file.

  -Install SQL and restore the DB on the new server.

  -Install the VC and connect ODBC etc...

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• PowerEdge 2850 Windows Server 2012 do not start

  Well, I have a PE 2850 that was loaded to the top with Windows Server 2012 at the beginning of the year last as part of our upgrade to Windows 7. Even though I know that Windows Server 2008 is the latest version of Microsoft to officially support the SCSI interfaces as RAID PERC 4E/DI included in the 2850 card, I was able to work around in first install 64-bit Server 2008 with the SCSI drivers and then doing an upgrade online to the 2012 server.

  Everything went fine for the last year and half, but when I got to work yesterday, the server had crashed and he was sitting on the screen of the BIOS with the following error message:

  Memory/battery problems were detected. The adapter has recovered, but cached data have been lost. Press a key to continue.

  I pressed on enter and the server started to move to a preparation repair screen Windows where the progress bar is not long about 80% of the way and then froze for more than an hour. Subsequent attempts to restart in safe mode led to the server of freezing for several minutes before restarting once more to this same error message at the Windows logo screen. I can pull up to the management of the RAID and see my partitions still there, and I even loaded my readers in an old PE 2600 to check consistency on the logical drives (no problem found). However, the old 2600 is 32-bit architecture and it won't try to boot into the operating system.

  At this point, I'm really just trying to get a full backup of my system. I don't mind getting a new server, but I don't want to keep throwing money at this old piece of 12 year of equipment without knowing if it works or not. The problem is that 2012 uses ReFS, and none of the recovery programs I found can access my logical volumes. Boot from the OS Installation disk in the recovery console doesn't work, because the OS disk does not include SCSI drivers native to be able to see the score of the OS or the data partition.

  I think I'll call a few services data recovery tomorrow, but I would check here for ideas first. Any input is greatly appreciated.

  Microsoft has removed native SCSI support with 2008 R2, but R2 2008 provided Dell drivers for the PERC. These drivers work for the installation of Server 2012 as well.

  Memory/battery message: all stop and order the memory of replacement for the controller RAID, 4D554 part number. Nothing related to the operating system won't work (installation, repair, etc.) until you do. This question is very specific to the PERC 4e/Di on the 28 x 0.

  The 2850 is not 12 years. First of all, he started 10 years ago to shipping.

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.