Suspension of consistent application on Windows Server 2012 invited with U2 ESXi 5.0

Similar Questions

• Error installing 32 bit application in Windows Server 2012 R2 Datacenter edition

  Hi all

  I have a software that worked very well in a 32-bit of Windows Server 2008, I installed the same software in a 64-bit Windows server 2012 R2.

  I get an "error 48 error loading the dll" error when I run.

  I tried to register the dll through command regsvr32. I get an error "dll was loaded, but the DllRegisterServer entry point was not found."

  I checked the dependence of the dll with other files you use Depends.exe

  I tried to copy the dll in the other place, but none of them worked.

  I still get the same error when I run the application.

  Please help us with this if you know the solution.

  Forgive me if this isn't the correct phase and guide me to the correct page.

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• Windows Server 2012 R2 - With single-server remote desktop

  Just recently got a new PowerEdge T430 and as he came MS Server R2 2012. This server will belong to a workgroup with users accessing remotely.

  My question for the moment is this message: you are currently logged on as a local administrator on the computer you must be logged in as a domain user to manage servers and collections.

  
  Am I missing some setting? Or is this a limitation of 2012? Decommissioning of 2008 will solve my problem?

  Of course, you can promote to DC. It can execute a standalone domain with no machines. It simplifies everything EVERYTHING, including "just" files exchange/keep, use it as a "Workstation" is not simplify anything. You can uninstall RDS and JUST use RDP to connect to the machine using local users, but if you want to use the RDS feature, you will need a domain environment.

• Applications installed on Windows Server 2012 is not visible.

  Recently installed a few applications on Windows Server 2012 server by using Local Administrator id.

  When we connect using any user of domain/local, we are unable to find the application installed in the 'Apps' & If connect us with the id of the Local Administrator we can browse for apps.

  & if any what other domain/local user login he or she can see only a blue screen empty :(

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• AUSST 4.0 on Windows Server 2012 R2 installation

  Hello

  I am installing AUSST on Windows Server 2012 R2 with IIS 8.5, although I can't get the thing to work!

  I followed the instructions to use the Adobe update (AUSST) server configuration tool if I do something wrong.

  All updates have been downloaded to the directory "c:\AdobeCloudUpdate" (a little more than 80 GB). I created a new web site in IIS to point to this directory as root and set the permissions to the local group 'IIS_USERS' read, list, etc.

  I followed the instructions to add the types of files for maps to the level of the server, changed the classic and set AppPool to update the 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\web.config' file with the veriables add path to 5 file types.

  When you try to access the "updaterfeed.xml" of a client computer using the full URL of the "http://co-au-01.contoso.msft/webfeed/oobe/aam20/win/updaterfeed.xml", I get a XML page cannot be displayed error.

  

  I created a file of substitution of "AdobeUpdater.xml" and added this to a new package is created in Packager CC and deployed just Photoshop and Office CC application. When I load the soft CC I get a download error when you try to view the applications.

  

  I tried to change other web.config files not found on the Server IIS ("C:\Windows\Microsoft.NET\Framework\v4.0.30319\config") and also the v2 of .net and .net v4 in the 'C:\Windows\Microsoft.NET\Framework64', but no joy.

  I hope it's a very simple solution and just miss a step but little help would be highly appreciated.

  Thanks in advance,

  
  Tom

  Something I've discovered here is that you need to add a wildcard on the VAC/services/FAC file MIME type (more precisely the validation file), because the files of validation is not an extension so he threw back a 404 error.

  

  I hope it suits it for you!

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

• T61 - Datacenter Windows Server 2012

  Hi all

  I need to install Windows Server 2012 Datacenter with Hyper-v installed on a Thinkpad laptop, because it is more durable compared to others, and I am planning buy Lenovo ThinkPad T61 with following specifications:

  Hello

  Looking system requirements here on the website of Microsoft, it seems that the T61 meets the system requirements to run Windows Server 2012, but it's largely because Microsoft does not seem to differentiate between the requirements for the Foundation, Essentials, Standard, and Datacenter editions.

  Personally, I would suggest to go with the bigger, more quick 2012-vintage (or most recent) laptop that I could find, for example a W520 or the W530.

  Kind regards

  Aryeh Goretsky

• Windows Server 2012 R2 Private File Sharing

  Hello

  I have a Windows Server 2012 R2 with experience Essentials that I use for my home.  I would like to configure the server so that my family and I can access the contents of all the job server and connect to home via Office at distance as well. How would I do that? All my computers at home running the version of windows 7 and 8 lay, so I can't use a domain.  I understand that I may access to any where, but I understand that in the installation of the role of the experience of Essentials, you must configure a domain.
  I appreciate the help and can provide all the necessary information.

  Hey Connor,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer&filter=AllTypes&sort=lastpostdesc

• Windows Server 2012 slow on ESXi 5.1U1

  Dear jury,

  recently, I installed four Windows Server 2012-VMs on my ESXi. It's a HP DL380G7 (Controller-P410i HP Xeon E5645, 144 GB of RAM, with 8 HP - SAS 500 GB in RAID6).

  All four virtual machines have a very poor performance, SMB video speed, slow slow.

  I have a server 2008R2-Windows on the same host, which are very good. If I copy a file (for example an ISO) of my client to the server, I have about 80 MB/s. If I do the same in one of my 2012 server, I get about 20 MB/s or less. Sometimes the process cancels (destination network not found)... Still the same thing if I copy between virtual machines. When the copy of CPU consumption amounts to 70%, sometimes at 100%, the server is not usable this time.

  What I've done and tested:

  * 2012 Server installed by the standard ISO (MS Action Pack-download)

  * fact update ESXi 5.1 to 5.1U1 and updated on all virtual machines VMWare tools

  * change to VMXNET3 E1000E network card

  * disabled SMB signing

  * changed SVGA drivers for MS-display Standard driver (3D acceleration is grayed out in the VM options!)

  * Settings IP of all virtual machines are ok (DHCP)

  All the 2008R2 works well, all 2012 are very slow...

  What can I check or what I got wrong?

  TIA and greetings from the Germany

  Matthias.

  It's weird,

  As I did the day 1 for my ESXi5.1 update I upated the VMWare tools on all virtual machines as well. Every server 2008R2 did a restart and they are always very good. 2012 servers did not reboot after update the VMWare Tools. Today, I did a restart of all my servers from 2012 and voila, 3 out of 4 are very good. Running quite smooth with 80 to 100 Mbps SMB-Performance! GREAT!

  Just a virtual machine is too slow I started... But this one I will get in shape too, I think that...

  Display 3D even drivers are fine now.

  Best regards

  Matthias.

• VS 2012 Windows 7-based Application crashes on Windows Server 2012

  A generated application on a Windows 7 machine does not work on Windows Server 2012 but works fine on other desktops.

  An exception of type "attempted to read or write protected memory. It is often an indication that other memory has been corrupted. "is thrown.

  When I debug using remote debugging on the WindowsServer2012 machine and the build computer, I see that this exception is thrown in a place where is he called kernel32 HeapSize in code.

  It's the exception log that WinDbg shows:

  

  Any idea what could be going wrong?

  Hello

  Your question is beyond the scope of this community.

  Please post your question to the MSDN Visual Studio Forums.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  And/or the Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 BEX problem

  Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...

  Problem signature:
    Problem Event Name:   BEX
    Application Name: Tibia.exe
    Application Version:  10.9.3.0
    Application Timestamp:    5726e97b
    Fault Module Name:    Tibia.exe
    Fault Module Version: 10.9.3.0
    Fault Module Timestamp:   5726e97b
    Exception Offset: 00362276
    Exception Code:   c0000409
    Exception Data:   00000007
    OS Version:   6.3.9600.2.0.0.16.7
    Locale ID:    1033
    Additional Information 1: e6cc
    Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b
    Additional Information 3: 996a
    Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d
  
  Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=280262
  
  If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
  

  Can U help me?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error message from Windows Server 2012

  Hello

  We have an application that runs on multiple virtual machines of Windows Server 2012. The same version of the application runs correctly on all machines except one. On the race we get repeated .NET runtime, error messages in the Windows Event Viewer.

  Application: Vsop.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception info: exception code c0000005, exception address 6C3A23B7
  Battery:

  I checked the windows crash dump and you can observe the message.

  "the thread attempted to read or write to a virtual address to which he has no access.

  I couldn't find a reason for this behavior on a specific system. Can anyone provide some tips on why or how to fix?

  Thank you!!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  This particular configuration is with Coldfusion 11. There is no errors in newspapers and the w3 service still works as are application pools. All websites and app pools run with transmission of authentication request.

  ColdFusion does not work with windows authentication and may be enforced as if reconfigured integrated instance to do this, if this isn't a matter of colfusion.

  Here is what I tried:

  1 I created a new user account with admin rights and disconnected and logged in as them and then make changes to the password on the server, and that didn't make a difference.
  2. I checked that all Web sites using the request pass through authentication.
  3. I checked that the application pool is also using the application-pass-through authentication.
  4. I looked to find errors in which case newspapers but don't see anything there either
  5. I also searched a failure in coldfusion logs and saw no more relevant here either, but I got colfusion running without IIS in any case.
  6. search of the roots of web for coded passwords hard and found nothing.

  If you have any ideas or any ideas let me know.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer