Backup system state data

Similar Questions

• the system state data can be contained in 2 different folders, e.g. Windows or host1

  Hello

  Recently, my computer was able to start and I had neglected to backup my data. While dealing with the Windows Recovery Console, I inadvertently added a folder called host1 to the system. I tried to replace and remove this folder, but could not. Currently, I'm trying to back up my data to the system state by using the Windows backup utility. What's weird, is that in the log file, "Host1" is listed under the file saved to the system state data. Previously, these data were in the "Windows" folder The content of two files seems to be identical. I need to get rid of unnecessary duplication in my system. The backup file size was more than 200 gb. Phew!

  Thank you

  Before deleting copy just the system folder windows.old + System32 files (these files contain most of the settings and drivers. (In the case where in the future you need a driver for a printer you have you can always point windows to find in these files) in a new folder on the C drive and delete the rest in the windows.old and the folder windows.old himself. You could rename the Windows folder and not the host1 because XP uses host1 as its new folder. This is where the operating system boots from. The old windows folder contains more data due to past use and all programs that you have installed since you had the PC.

  All the best

• backups system state backups vs vm

  Hello

  There are a lot of practical documentation on system state backups, but what's the point of system state backups, if you are running backups of virtual machine using the vstorage api.  I know that for the AD, a backup of the system state is better that one vm, backup, but other than that, has no useless system state backup is a backup of virtual machine (I was going to say redundant).

  I am trying to develop a strategy for which use.  My preference is to make backups of VMS (no file level) and use sparingly system state backups.  Do both adds to planning of backup with more, that there is less tolerance for a backup window and more an expectation of off-host backups.

  falcone1

  DSTAVERT wrote:

  For a domain controller you need to make backups of system state. Without them, you may lose AD. According to the recommendations of Microsoft at least twice a day.

  This isn't a very good statement. As always, 'it depends' - depends on your image-level backup solution. With Veeam, you have not had do this - unless you want to have redundancy on the backup of the same data twice.

  However, with the image at the level of backup solutions which are not multi-application and do not treat virtual computers running some applications in a special way on the backup and restore, you certainly to do that. Otherwise, in case of DC for example, you will end up with a USN restoration on the restoration, and it will screw up your ad.

  In addition, just to cover some other points above:

  If you try to restore a DC from backup of image based (i.e. a backup to the current no AD) in a multi domain controller environment, you will almost certainly encounter problems of replication synchronization after restoring as the AD database was restored in a way not supported.

  That's right, unless you use the image-level such as Veeam backup solution, which performs backups multi-application and – most importantly – multi-application restorations.

  Also, image based backups not serve to an Exchange Server transaction logs, so it will continue to grow until a backup of the information store.

  It is also an accurate statement of many image-level backup solutions. Most of them do not at all cut the Exchange transaction logs. Some will be plum them immediately to the creation of the snapshot (before the backup is completed successfully) - which is actually worse than not not their pruning at all - because you find yourself without reliable backup and logs are gone too. And only a few image-level backup solutions (for example, Veeam) will do it properly, pruning Exchange connects after successful only backup.

  I would definitely test any solution backup abundantly in the test environment with applications, before making decisions on the backup strategy. There are too many marketing of nowadays. Many image-level backup providers tend to make a big deal of features without importance and features of the product, while being silent to not have more basic, core features that are expected of any backup solution - as above - correctly handles backup and restore applications.

  I hope this helps. Warning, I work for Veeam.

• Server 2003 System State backup

  How to make a backup of my Windows Server 2003 System State? I am a beginner again and need a little demanding solution. Thanks in advance.

  Maybe you could try a professional software to reach your goal. There are two of the most outstanding: www.todo-backup.com/.../backup-system-state.htm, www.backup-utility.com/.../backup-server-2003-system-state.html. so easy to use.

• Recover lost File_Access backup system

  XP Home Edition: I don't have to re-record a word file I did hours of changes to, but even since I took my computer in for repairs that I got this message that floats to the top and told me I did a backup system. I can't understand how access only. Suggestions? Thank you!

  Assuming that someone set up backup NT to do something for you without your knowledge * and * they chose to save more than just the State of the system * and * you saved the file you want to recover in the State you want to recover in to one of these backups occurred * and * there was enough space (or pension) not to crush the last backup with a new one that occurred after the backup that you really want) If it exists) has been done...

  Click on start--> all programs--> Accessories--> System--> Backup Tools. The wizard backup or restore starts. Click "Advanced Mode". Click on the tab "restore and manage the media.

  If you want to restore from a backup file, expand file, and then the file backup that you want. For example, expand Sauveg.bkf created on 02/09/2011 at 13:15 backup includes the date and time of the backup as part of the default file name.

  Select the check boxes for the folders you want to restore. If you want to be more specific in your selections, double-click the folder you want, and then select the check boxes for the files or folders you want to restore.

  In the restore from box files, use one of the following steps:

  If you want to restore the files to the location where you saved the, click original location. Use this selection when you restore the entire computer.

  If you want to restore one or more files to another location on the hard drive, click on another location. Type the location in the location box. Use this selection to prevent the restore operation to overwrite existing files on your computer.

  If you want to restore one or more files in a single folder on the hard disk, click single folder. Type the location in the location box. This selection allows to separate from the rest of the files on the hard drive the restored files or folders. On the Tools menu, click Options.

  Click the backup method to use when it restores a file that is already on the computer, and then click OK. Backup uses this selection to determine whether to replace an existing file only when it restores a file in a folder that contains the existing file. Click Start Restore.

  In the restore confirmation prompt that appears, click OK. A restore in progress dialog box appears, and the restore operation starts. When the restore process is complete, click Close. If you are prompted to restart the computer, click Yes.

  That is based on certain important assumptions that point to the fact that you should probably configure your own backups that you understand and control.

• Merge two files of system-jazn-"Data.xml"

  Hello
  
  I have a system-jazn-"Data.xml" from Apps BI 7.9.6.4 sized * 1291 KB * (having financial, HR, EAM Analytics) Note: a new installation and no changes have been made in safety.
  
  Now for EAM Analytics, there is a bug and all application roles are not present in the policy store and apply a patch Patch 16321623 which just States copy the new file system-jazn-"Data.xml" to the location of fmwconfig (see ) doc 1548988.1 )
  Problem is that the size of the system-jazn-"Data.xml" is * 342 kb.*
  
  Looks like both of these system-jazn-"Data.xml" should be merged. (don't know, maybe this 342KO file contains all application roles)
  Need advice here... as for what I'd do here. ?
  
  Thank you
  Ashish

  See that there is no problem if you replace, just take the backup or rename the existing _old and copy a new. Even when I installed the OBIA on windows machine on top of some OBIEE dummy to generate the folders (biapps) of informatica, dac, RPD, catalogue files metadata then afterwards I got the file from the file 800ko and according to the guidelines of the oracle, I need to replace the one that is generated with OLIVIER on top on OBIEE which is only 320 kb file I simply replaced it na not thorw errors/problems until now. So I m confident enough to replace the file.

  See this link http://docs.oracle.com/cd/E20490_01/bia.7963/e19038/windows_ic.htm#BABDCEGC paragraph 4.17 applying the security policy of the Oracle BI Applications to the BI domain

  If your BI EE deployed with the Oracle's Applications of BI system is different from the BI EE system used to install some Applications of BI from Oracle, you must apply to the security policy of the domain of BI on BI EE system deployed by following the steps below.

  If your BI EE deployed with the Oracle's Applications of BI system is the same as the BI EE system used to install some Applications of BI of Oracle, then the installer of Oracle's Applications of BI performs this configuration automatically.

  To apply the security policy of the Oracle BI Applications to the BI domain:

  Note: Machine is the machine system. B is the deployment machine.

  Stop all processes in the system of BI EE. More precisely:

  the Administration Server

  + (if there is a cluster) all managed servers in the cluster bi_cluster +.

  all processes managed opmn

  On computer B, save and rename the existing DOMAIN_HOME/config/fmwconfig/system-jazn-data.xml.

  For example, if the root folder of BI EE is named OracleBIEE11g, then the folder location of the field (on Windows) can be C:\OracleBIEE11g\user_projects\domains\bifoundation_domain\config\fmwconfig.

  Copy the jazn file Applications of BI of Oracle machine machine B to DOMAIN_HOME/config/fmwconfig A ORACLE_HOME/biapps/admin/provisioning/system-jazn-data.xml.

  Start all processes in the BI EE system for security of Oracle's Applications of BI policy take effect. More precisely:

  the Administration Server

  + (if there is a cluster) all managed servers in the cluster bi_cluster +.

  all processes managed opmn

  It may be useful

• I get this error on backup system 0 x 80070002

  original title: backup system error

  When my computer do regular back I get the error message: the system cannot find the specified file (0 x 80070002).  How can I get my backup to run?

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Windows 7 Ultimate 64-bit hangs during antivirus and backup system analysis

  I have problems with my PC. Last night, before retiring for the night, I noticed that Microsoft Security Essentials icon is yellow and warning me that my computer was in danger and had not been scanned for viruses for awhile. Normally it is set to run automatically on a schedule, but it does not work if my computer is set to go to sleep after a period of inactivity (which is because I want to save energy). So I have to manually run the virus scan. I have it set to run a FULL scan and then went to bed. In the morning, I noticed that my computer has been completely closed. It would normally be asleep and she simply by moving my mouse wake up. I had to hit the power button on my PC to start upward. The warning message that Windows did not close properly displayed and gave me the boot options. I just booted normally. As the virus scan has been the last thing my computer did the night before, I decided to try to run a FULL scan again. It crashed my PC. I started again and tried a QUICK analysis, which worked well. I searched "Microsoft Security Essentials plant system" and found a recent instance with someone else, and after more detailed diagnosis, they determined that it was probably a failing hard drive or a bad memory. The recommendation was immediately back up their system of hard drive and replace it.

  Before you run any Diagnostics to determine my culprit, I decided to start a backup system just to be safe. I ran Windows Backup and choose "Create a system image" and he has done on an external hard drive on a USB3 docking station. He got about 90% through the backup, then my system crashed. No error message, just a full stop.

  Unfortunately, a not save the link to the original set of instructions to diagnose why the system crashed during the anti-virus scan.

  Now I ask... What can I do to save my system if it crashes my computer?

  Hi Greg,.

  Thanks for posting your query in Microsoft Community.

  I understand that the system hangs when a complete analysis of how MSE or backup system and I'll be happy to answer your query. This could be due to MSE not updated and that's why he showed the yellow icon. We will try the following methods and check.

  Method 1: Microsoft Security Essentials (MSE) update

  For update to MSE, please see: How to manually download the latest Microsoft Security Essentials definition updates

  Here are some methods that you can try in order to solve the problem.

  Method 1: Perform the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 3.

  Method 2: Clean boot material and check.

  a. go to Start and type Device Manager in the start search field.
  b. type Device Managerand select Device Manager from the list programs.
  c. right click on the sound card, video card and NIC, one by one, then click on disable.
  c. restart the computer.

  If it solves your problem, allow hardware devices that in time to find the exact device originally this problem. After you find the device that causes the problem you can solve by installing the latest driver or replacement of the device.

  Method 3: Do restore the system from the Windows recovery environment and verify.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• I have that one saved backup system, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  I run the Windows Image backup to a hard drive external on a weekly schedule. The result shows on the hard drive as "WindowsImageBackup\(User name)-PC\Backup (date) (number)"-currently about 80 GB (binary).

  I reserve about 135 GB of available space for backups of the system, so I save only the last backup of the system.

  So far, I have no problem with that.

  However, the disk hard, there is another folder '(USER NAME)-PC' & under which is a folder "backup of files (date) (number)" for each time that the backup system runs.

  These files vary considerably in size - for example, 1 GB, 12 GB, 22 GB. They delete or replace automatically - just, they accumulate.

  What I want to know is ~.

  What is the purpose\importance of these additional files?

  Since I only have a single saved backup, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  Original title: Windows Image backup

  Hello

  Thanks for the reply.

  File '(Computer name)-PC "contains the files necessary for the Windows. Data files saved in libraries, on the desktop, and if the Windows folders for all people with a user account on the computer are also recorded.

  [The default Windows folders include AppData, Contacts, desktop, downloads, Favorites, links, saved parties and searches.]

  The size of these files increases, because the content of the folders mentioned above increases.

  For more information, see the article mentioned below:

  How Windows selects the files to back up?

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• ADFC-0619: failed the authorization check but system-jazn-"Data.xml" entry

  Hello

  I have an urgent problem with permission on production area.

  I set the permission for my App. create custom pages so login and custom to redirect, the Spanish developer Login bean works fine, but on prodocution I got an exception:

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))

  [WatchData: DATE = July 7, 2014 11:05:33 AM EDT SERVER = AdminServer MESSAGE = [path of the module: app_name_test ServletContext@304698745[app:AppName: / app_name_test spec-version: 2.5]] Servlet failed with Exception

  oracle.adf.controller.security.AuthorizationException: ADFC-0619: authorization check failed: 'viewcontroller.pageDefs.homePageDef', 'VIEW '.

  at oracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure(AuthorizationEnforcer.java:182)

  at oracle.adf.controller.internal.security.AuthorizationEnforcer.internalCheckPermission(AuthorizationEnforcer.java:162)

  at oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission(AuthorizationEnforcer.java:116)

  at oracle.adfinternal.controller.state.ControllerState.checkPermission(ControllerState.java:663)

  at oracle.adfinternal.controller.state.ControllerState.initializeUrl(ControllerState.java:700)

  at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart2(ControllerState.java:473)

  at oracle.adfinternal.controller.application.SyncNavigationStateListener.afterPhase(SyncNavigationStateListener.java:59)

  to oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$ PagePhaseListenerWrapper.afterPhase (ADFLifecycleImpl.java:530)

  at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120)

  at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchAfterPagePhaseEvent(LifecycleImpl.java:168)

  to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ PhaseInvokerImpl.dispatchAfterPagePhaseEvent (ADFPhaseListener.java:131)

  at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:74)

  at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:447)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)

  JPS - config.Xml

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < jpsConfig xmlns =" http://xmlns.Oracle.com/OracleAS/schema/11/JPs-config-11_1.xsd "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " xsi: schemaLocation = " http://xmlns.Oracle.com/OracleAS/Schema/11/JPS-config-11_1.xsd HSD-config - 11_1.xsd" >

  < = name="oracle.security.jps.jaas.mode"/ 'doasprivileged' property value >

  < serviceProviders >

  "< class ="oracle.security.jps.internal.idstore.xml.XmlIdentityStoreProvider serviceProvider"name =" idstore.xml.provider "type ="IDENTITY_STORE">

  < description > XML-based IdStore provider < / description >

  < / serviceProvider >

  "< class ="oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider serviceProvider"name =" policystore.xml.provider "type ="POLICY_STORE">

  < description > XML-based PolicyStore provider < / description >

  < / serviceProvider >

  "< class ="oracle.security.jps.internal.anonymous.idm.IdmAnonymousServiceProvider serviceProvider"name =" anonymous.provider "type 'ANONYMOUS' = >

  < description > anonymous access provider < / description >

  < / serviceProvider >

  "< class ="oracle.security.jps.internal.login.jaas.JaasLoginServiceProvider serviceProvider"name =" jaas.login.provider "type ="LOGIN">

  < description > Service Provider for the connection Module < / description >

  < / serviceProvider >

  < / serviceProviders >

  < serviceInstances >

  < provider = "idstore.xml.provider serviceInstance" name ="idstore.xml" > "

  "< value="./jazn-data.xml property "name ="location"/ >

  < property value = 'OBFUSCATE' name="jps.xml.idstore.pwd.encoding"/ >

  < value property = "jazn.com" name = "subscriber.name" / > "

  < / serviceInstance >

  < provider = "policystore.xml.provider serviceInstance" name ="policystore.xml" > "

  "< value="./jazn-data.xml property "name ="location"/ >

  < = 'false' name="oracle.security.jps.policy.principal.cache.key"/ property value >

  < / serviceInstance >

  < provider = "anonymous.provider serviceInstance" name = "anonymous" / > "

  < provider = "jaas.login.provider serviceInstance" name ="anonymous.loginmodule" > "

  < value = "oracle.security.jps.internal.jaas.module.anonymous.AnonymousLoginModule property" name = "loginModuleClassName" / > "

  < property value = "REQUIRED" name="jaas.login.controlFlag"/ >

  < property value = "true" name = "debug" / >

  < property value = "true" name = "addAllRoles" / >

  < / serviceInstance >

  < provider = "jaas.login.provider serviceInstance" name ="idstore.loginmodule" > "

  < value = "oracle.security.jps.internal.jaas.module.idstore.IdStoreLoginModule property" name = "loginModuleClassName" / > "

  < property value = "REQUIRED" name="jaas.login.controlFlag"/ >

  < property value = "true" name = "debug" / >

  < property value = "true" name = "addAllRoles" / >

  < = 'false' name="remove.anonymous.role"/ property value >

  < / serviceInstance >

  < / serviceInstances >

  < jpsContexts default 'anonymous' = >

  < name jpsContext 'anonymous' = >

  < serviceInstanceRef ref = 'anonymous' / >

  < serviceInstanceRef ref = "anonymous.loginmodule" / >

  < / jpsContext >

  < / jpsContexts >

  < / jpsConfig >

  Web.Xml

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < web - app xmlns =" http://Java.Sun.com/XML/NS/JavaEE "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" http://Java.Sun.com/XML/NS/JavaEE http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"" "" "

  version "2.5" = >

  < context-param >

  javax.faces.STATE_SAVING_METHOD < param-name > < / param-name >

  customer of < param-value > < / param-value >

  < / context-param >

  < context-param >

  javax.faces.PARTIAL_STATE_SAVING < param-name > < / param-name >

  < param-value > false < / param-value >

  < / context-param >

  < context-param >

  < description > if this parameter is set to true, there will be an automatic check of the date of the change of your JSP pages and saved state will be scrapped when JSP change. It will also automatically check if your css skinning files have changed without requiring you to restart the server. This facilitates the development, but adds above. For this reason, this parameter must be set to false when your application is deployed. < / description >

  org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION < param-name > < / param-name >

  < param-value > false < / param-value >

  < / context-param >

  < context-param >

  < description > if the comment "generated by...» "down in pages ADF Faces HTML should contain version number information. < / description >

  oracle.adf.view.rich.versionString.HIDDEN < param-name > < / param-name >

  < param-value > false < / param-value >

  < / context-param >

  < context-param >

  Oracle.ADF.jsp.provider.0 < param-name > < / param-name >

  oracle.mds.jsp.MDSJSPProviderHelper < param-value > < / param-value >

  < / context-param >

  < context-param >

  < description > File Upload < / description >

  org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE < param-name > < / param-name >

  < param-value > 10485760 < / param-value >

  < / context-param >

  < context-param >

  < description > the safety precautions to prevent clickjacking: bust of executives if the area of window ancestor (Protocol, host and port) and the framework are different. Other options for this setting are always and never. < / description >

  org.apache.myfaces.trinidad.security.FRAME_BUSTING < param-name > < / param-name >

  differentOrigin < param-value > < / param-value >

  < / context-param >

  < context-param >

  javax.faces.FACELETS_SKIP_XML_INSTRUCTIONS < param-name > < / param-name >

  < param-value > true < / param-value >

  < / context-param >

  < context-param >

  javax.faces.FACELETS_SKIP_COMMENTS < param-name > < / param-name >

  < param-value > true < / param-value >

  < / context-param >

  < context-param >

  javax.faces.FACELETS_DECORATORS < param-name > < / param-name >

  oracle.adfinternal.view.faces.facelets.rich.AdfTagDecorator < param-value > < / param-value >

  < / context-param >

  < context-param >

  javax.faces.FACELETS_RESOURCE_RESOLVER < param-name > < / param-name >

  oracle.adfinternal.view.faces.facelets.rich.AdfFaceletsResourceResolver < param-value > < / param-value >

  < / context-param >

  < filter >

  < filter-name > JpsFilter < / filter-name >

  > class filter < oracle.security.jps.ee.http.JpsFilter < / class filter >

  < init-param >

  enable.anonymous < param-name > < / param-name >

  < param-value > true < / param-value >

  < / init-param >

  < init-param >

  Remove.anonymous.role < param-name > < / param-name >

  < param-value > false < / param-value >

  < / init-param >

  < / filter >

  < filter >

  < name of filter > Trinidad < / filter-name >

  > class filter < org.apache.myfaces.trinidad.webapp.TrinidadFilter < / class filter >

  < / filter >

  < filter >

  < filter-name > adfBindings < / filter-name >

  > class filter < oracle.adf.model.servlet.ADFBindingFilter < / class filter >

  < / filter >

  < filter >

  < filter-name > ADFLibraryFilter < / filter-name >

  > class filter < oracle.adf.library.webapp.LibraryFilter < / class filter >

  < / filter >

  < filter mapping >

  < filter-name > JpsFilter < / filter-name >

  < url-pattern > / * < / url-pattern >

  < distributor > BEFORE < / dispatcher >

  < distributor > APPLICATION < / dispatcher >

  < distributor > INCLUDE < / dispatcher >

  < / filter-mapping >

  < filter mapping >

  < name of filter > Trinidad < / filter-name >

  < name servlet - > Faces Servlet < / servlet-name >

  < distributor > BEFORE < / dispatcher >

  < distributor > APPLICATION < / dispatcher >

  < distributor > ERROR < / dispatcher >

  < / filter-mapping >

  < filter mapping >

  < filter-name > adfBindings < / filter-name >

  < name servlet - > Faces Servlet < / servlet-name >

  < distributor > BEFORE < / dispatcher >

  < distributor > APPLICATION < / dispatcher >

  < / filter-mapping >

  < filter mapping >

  < filter-name > ADFLibraryFilter < / filter-name >

  < url-pattern > / * < / url-pattern >

  < distributor > BEFORE < / dispatcher >

  < distributor > APPLICATION < / dispatcher >

  < / filter-mapping >

  < filter mapping >

  < filter-name > adfBindings < / filter-name >

  < name servlet - > adfAuthentication < / servlet-name >

  < distributor > BEFORE < / dispatcher >

  < distributor > APPLICATION < / dispatcher >

  < / filter-mapping >

  <>earpiece

  oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack <-listener class > < / listener class >

  < / earphone >

  <>earpiece

  oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack <-listener class > < / listener class >

  < / earphone >

  <>earpiece

  Oracle.BC4J.MBean.BC4JConfigLifeCycleCallBack <-listener class > < / listener class >

  < / earphone >

  < servlet >

  < name servlet - > Faces Servlet < / servlet-name >

  > the servlet class < javax.faces.webapp.FacesServlet < / servlet-class >

  < load-on-startup > 1 < / load-on-startup >

  < / servlet >

  < servlet >

  resources < name of the servlet > - < / servlet-name >

  > the servlet class < org.apache.myfaces.trinidad.webapp.ResourceServlet < / servlet-class >

  < / servlet >

  < servlet >

  < name servlet - > BIGRAPHSERVLET < / servlet-name >

  > the servlet class < oracle.adf.view.faces.bi.webapp.GraphServlet < / servlet-class >

  < / servlet >

  < servlet >

  < name servlet - > BIGAUGESERVLET < / servlet-name >

  > the servlet class < oracle.adf.view.faces.bi.webapp.GaugeServlet < / servlet-class >

  < / servlet >

  < servlet >

  < name servlet - > MapProxyServlet < / servlet-name >

  > the servlet class < oracle.adf.view.faces.bi.webapp.MapProxyServlet < / servlet-class >

  < / servlet >

  < servlet >

  < name servlet - > GatewayServlet < / servlet-name >

  > the servlet class < oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet < / servlet-class >

  < / servlet >

  < servlet >

  < name servlet - > adflibResources < / servlet-name >

  > the servlet class < oracle.adf.library.webapp.ResourceServlet < / servlet-class >

  < / servlet >

  < servlet >

  < name servlet - > adfAuthentication < / servlet-name >

  > the servlet class < oracle.adf.share.security.authentication.AuthenticationServlet < / servlet-class >

  < init-param >

  success_url < param-name > < / param-name >

  /faces/home.jspx < param-value > < / param-value >

  < / init-param >

  < load-on-startup > 1 < / load-on-startup >

  < / servlet >

  < servlet-mapping >

  < name servlet - > Faces Servlet < / servlet-name >

  < url-pattern > /visages / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  resources < name of the servlet > - < / servlet-name >

  < url-pattern > /adf / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  resources < name of the servlet > - < / servlet-name >

  < url-pattern > /afr / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  < name servlet - > BIGRAPHSERVLET < / servlet-name >

  < url-pattern >/servlet/GraphServlet / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  < name servlet - > BIGAUGESERVLET < / servlet-name >

  < url-pattern >/servlet/GaugeServlet / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  < name servlet - > MapProxyServlet < / servlet-name >

  < url-pattern > /mapproxy / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  resources < name of the servlet > - < / servlet-name >

  < url-pattern > /bi / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  < name servlet - > GatewayServlet < / servlet-name >

  < url-pattern > /flashbridge / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  < name servlet - > adflibResources < / servlet-name >

  < url-pattern > /adflib / * < / url-pattern >

  < / servlet-mapping >

  < servlet-mapping >

  < name servlet - > adfAuthentication < / servlet-name >

  <>url-pattern / adfAuthentication < / url-pattern >

  < / servlet-mapping >

  < mapping mime - >

  SWF < extension > < / extension >

  mime-type application/x-shockwave-flash <>< / mime-type >

  < / mime map >

  < mapping mime - >

  AMF < extension > < / extension >

  <>mime-type application/x-amf < / mime-type >

  < / mime map >

  < jsp-config >

  < jsp-property-group >

  *.jsff < url-pattern > < / url-pattern >

  true < East - xml > < / xml is >

  < / jsp-property-group >

  < / jsp-config >

  < security constraint >

  < web-resource-collection >

  < web-resource-name > adfAuthentication < / web-resource-name >

  <>url-pattern / adfAuthentication < / url-pattern >

  < / web-resource-collection >

  <>auth-constraint

  valid users - < role name > < / role name >

  < / auth-constraint >

  < / security constraint >

  <>login-config

  FORM < auth-method > < / auth-method >

  < form-login-config >

  /faces/login.jspx < form-login-page > < / form-login-page >

  /faces/login.jspx < form-error-page > < / form-error-page >

  < / form-login-config >

  < / login-config >

  <-security role >

  valid users - < role name > < / role name >

  < / security role >

  < / web - app >

  jazn-"Data.xml"

  <? XML version = "1.0" encoding = "UTF - 8" standalone = 'Yes'? "" >

  " < jazn-data xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: noNamespaceSchemaLocation = ' http://xmlns.Oracle.com/OracleAS/schema/jazn-data.xsd "> "

  < default = "jazn.com Kingdom-jazn" >

  < domain >

  < name > jazn.com < / name >

  < / domain >

  < / Kingdom-jazn >

  < policy store >

  applications <>

  < application >

  < name > AppName < / name >

  < jazn > political

  <>grant

  < dealer >

  < directors >

  < principal >

  < name > authenticated role < / name >

  oracle.security.jps.internal.core.principals.JpsAuthenticatedRoleImpl < class > < / class >

  < / main >

  < / directors >

  < / dealer >

  <>permissions

  < permission >

  oracle.adf.share.security.authorization.RegionPermission < class > < / class >

  < name > viewcontroller.pageDefs.homePageDef < / name >

  Display < share > < / actions >

  < / authorization >

  < / authorization >

  < / grant >

  < / jazn-policy >

  < / application >

  < / applications >

  < / policy-store >

  < / jazn-data >

  My fragment of connection method:

  	HttpServletRequest request = (HttpServletRequest) () .getRequest () ctx.getExternalContext;
  	try {}

  
  Topic topic = Authentication.login (new URLCallbackHandler (UN, pw));weblogic.servlet.security.ServletAuthentication.runAs (object, request);

  HttpServletResponse response = (HttpServletResponse) ctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());

  	sendForward (request, response, LOGIN_URL);
  	} catch (FailedLoginException fle) {}
  	LOG.severe (fle);
  	String errorText = rsBundle.getString ("ERROR_LOGIN");
  	FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, errorText, errorText);
  	ctx.addMessage (null, msg);
  	}

  I use Jdev 11.1.2.4

  Any help why this configuration works on production envirement?

  My system-jazn-"Data.xml" has entered correct...

  Finally, I found... Administrator develop new envirement and they use java 1.8 (WTF). Have to kill them immediately after to write this post...

  I found that the search to setDomainEnv.sh

  Changed start at 1.6 and all works like magic... IM really surprised that start weblogic with java 8 and generate strange symtomps with authentication...

  I thank all of you for the help

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• Backup of the data in the partition in double

  My backup double partition data, even if it has been set to replace. How can I fix it? Thanks for any help.

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. is it limited to a particular backup?

  2. What backup program do you use?

  
  Method 1:
  You can see the steps in the link and check.

  http://support.Microsoft.com/kb/308422

  Method 2:

  You can save on different location and check what is happening.

  Just reply with the results. I'd be happy to help you more

• backup system required a disk... How to use a CD?

  G ' Day, I run XP SP3 and Office 2007. When you run a full backup of the system, I wonder to insert a floppy disk. I have not seen a floppy because Noah wear shorts. How can I change the system to request a CD-ROM. sincerely, Bob

  I don't think it's possible. The program you are using is very old, when all THE PCs have the floppy drives.

  Instead of using the built-in XP Backup program to perform a full backup of the system, do you a favor and use a better program like Acronis True Image or Paragon Backup System.

• Error "failure 0x8000FFFF catastrophic" when running on Vista computer backup system

  Original title: you try to run the backup.
  You save stopped running, catastrophic failure 0x8000FFF error message.

  Hello

  This problem occurs because the backup process detects that the system drive is dirty.
  Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive.
  and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.

  Refer to this article and follow the steps to solve the problem:

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)":
  http://support.Microsoft.com/kb/973558

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.