Bad resolution H.264 problem

Similar Questions

• hp4315 is in 22 minutes to print the test page. resolution of the problems of detection without problem.

  hp4315 is in 22 minutes to print the test page.  resolution of the problems of detection without problem.  Using Windows 7 64 bit

  This is caused by the failure of one of your cartridges. I'm not sure that the Officejet 4315 will print with a single cartridge installed, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• problem with drive Intel HD 520 - bad resolution

  Hello

  I bought the HP Pavilion 13-s104ne model and I am facing problem with the resolution.

  some msg boxes are not clear, it looks like to scanned box, I am really very angry about this and I need a solution...
  I tried to unstall and install the driver but nothing changed...

  Please help me

  Medhat

  medmarai

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about resolution issues and wanted to help.

  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• My web page uses svg images, but when the svg is printed by Firefox they are pixelated with bad resolution.

  I realized a web page that uses svg images. One of them is here:
  http://donwagner.dk/JZSS5.4.svg.

  The svg is produced by Adobe Illustrator, CS5 version. Seen in any browser, the images look good at any magnification, but when I print the page in Firefox, the image is blurry seriously, apparently because that pixelation uses the wrong resolution.

  The same phenomenon occurs in all browsers, not quite as bad in Chrome, but still not perfect.

  Do you have plans to fix this bug, or do you have a work around?

  Concerning
  Don Wagner

  Better control your graphics drivers are updated!

• HP envy 34 signature Edition: brand new HP Envy 34 bad resolution a blurry text on web pages

  Just got the Microsoftstore today and the picture quality is not good at all, photos and text are blurry on the web pages. If I hover over the text, it becomes so clear when the slider is moved, the text becomes blurry. The picures on facebook are also bad, not crisp or sharp. Even the message as I type is blurry as soon as I move the cursor out of the message box. Any ideas why this happens?

  Hi there @Judochop,

  That the Forums are with you!  I understand that you see the blurry images and text on your system.  I'm happy to give you a helping hand with this.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. HP desktop PC - how can I find my model number, serial number or product?

  All the drivers are up to date? If this isn't the case, please use the HP Support Assistant to help with that.
  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

  I would like to know if there is no change after that updates of road crossing.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Bad resolution on Windows 7 - Satellite P100-203

  Hello

  Since I installed the new Windows 7 (32 bit) on my Toshiba laptop, I has not yet managed to get a better resolution of the screen then 1024 * 768.
  I tread to install the necessary drivers windows 7 for my gforce go 7600 from the Toshiba Web site but that helped me to give me a higher resolution.
  It really hurts my eyes.

  Is there someone who may have a solution to this irritating problem?
  Thanks in advance,

  MH01

  Hello

  The question is whether the Device Manager contains a yellow exclamation point next to the graphics card. If there is no yellow exclamation point, this means that the driver is installed correctly and the lower resolution is not related to the missing driver.

  If there is a yellow mark exclamation then this means that you don't l l install the driver correctly.

  You can try to install the Toshiba page display driver, but don t, run the exe but cela in Device Manager.
  Use the Advanced Setup that allows you to point to the files in the driver downloaded from the driver page.

• HP Compaq 6715 s: bad resolution on HP Compaq 6715 s

  6715 s I bought a HP Compaq antiques. It has 10 pro installed windows but there seems to be a problem with the resolution of the screen (images look a little discaled and I get a horizontal scrolling on pages where I don't have them on my old laptop). Resolution is set to 1024 x 768, and I change it only at 800 x 600. In properties, I see 'generic PnP monitor '. What can I do to get the correct resolution?

  Hello:

  You must select the 84776.inf file.

  If you do not see when you try to browse to the device, try this...

  When you arrive at her browse my computer for driver software, simply browse the driver folder, make sure that the include subfolders is selected and see if the pilot goes like this.

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Display driver incorrectly installed on the pc, bad resolution on pc

  Hi, guys!

  I have a little problem with my pc. I own a Compaq Presario CQ57 and I recently reinstalled my windows 7 Ultimate 64 - bit Windows, due to a problem of windows. The person who installed the windows and the drivers, installed the wrong display driver and my PC displays everything in a weird way. The best size I choose for my resolution is 1024x768px, but I need a bigger one at all to work correctly.

  I looked for the drivers, but I can't find the one I need. I highly appreciate any response.

  I don't know if I managed to make myself clear, so I'll add a link. Click on. The first image of "set the display resolution" better describes what I need for my pc. Thank you!

  Ayase.

  This is the driver you need.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5264430&prodTypeId=321957&prodSeriesId=5186820&swLang=13&TaskID=135&swEnvOID=4063#11360

  Go to graphics and then download and run INTEL HIGH Definition 64-bit.

  Let me know how things work.

  REO

• Pavilion dv6 6130ew: resolution with drivers problem

  Hello. I had the problem after reinstallation of the system. I can't change the resolution higher than 1024 x 768. I tried the drivers from the site

  http://support.HP.com/pl-PL/drivers/selfservice/HP-Pavilion-DV6-6100-entertainment-notebook-PC-serie...

  All else fails... and last I can't download yet. I can't double-screen HDTV without a driver. It's irritaiting. Can someone help me to solve my problem?

  Hello:

  According to the specifications of product for your laptop, this should be the correct graphics driver you need that installs the switchable graphics drivers the Intel and AMD...

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp55092.exe

• Bad resolution for HP 2159 m with MacBookPro.

  After connecting the screen to my MacBookPro 2012 (Cougar) I just can't get a good resolution. I tried to use 1080 p in the settings of the screen on a Mac, but the result is so bad. It is not strong as it used to be with my old MacBook late 2006. How can I change the settings - I connect with a HDMI cable. should I use another alternative? Is that what I can do on the Mac or the screen?

  Check the calbe hdmi adapter. It might be a version that allows no more than 1080 p.

• Resolution of the problems of performance of MS said there are too many programs running at startup

  I ran MS performance problems resolution and it says I have too many programs running at startup.  Thank you for your help.

  * original title - can say it please, so I can understand, lol, exactly what programs are needed to startup.*

  Hi DjDenizeri,

  You can try to perform a clean boot and then turn on only the programs that you think you have need in the ultility system configuration:
  http://support.Microsoft.com/kb/929135
  I hope this helps.

• Bad resolution

  I have a 1920 x 1200, 16:10 native portable display. But when I go to display settings to change the resolution (below) I have all these funky resolutions that extend from my screen.

  Resolutions (lowest to highest)

  800 x 600, 1024 x 768, 1280 x 720, 1280 x 1024, 1400 x 1050, 1600 x 1200, 1920 x 1080 and my native 1920 x 1200 resolution.

  Wacky huh? All I want is the 1440 x 900 16:10 resolution, I'm afraid try adding the resolution in the register myself (because I'm not good with computers and don't know where to edit), I tried PowerStrip (not compatible with my ATI Radeon HD 3870 PCI Express card) and I have all my drivers updated, but I still have this problem.

  Please help me solve this problem, it would be greatly appreciated.

  Thank you

  Andrew

  Edit: Under Vista 64-bit and if you need more information to resolve this problem, just ask.

  Yes, I'm sorry that I have not been on. It seems that in the 10.x drivers Catalyst, they removed all the resolutions that I liked, so when I updated my graphics driver to 10.3 (current is one that came out), I lost all the resolutions. So, I went on the site Web of ATI, entered my OS and card and other and clicked on the "previous Drivers and Software" and downloaded the patch 9.12. All fixed upward. Thank you.

• Dual screen monitor - bad resolution options

  I have a Dell Latitude E6420 running Windows 7 Professional 64 bit which I use to several jobs in various locations.  Most have a docking station connected to one or two screens (one VGA, one DVI).  I run dual screen as often as I can, so, even at a workstation with a single monitor, I use the screen as a second monitor.  I also give presentations from my laptop, usually via a VGA connection port of the laptop.

  There is a special meeting room which has two screens plasma inside that depend on a VGA connection (must therefore always show the same performance and appear as the single monitor when connected to the laptop).  I use a lot this room.  Until recently, when I plugged it monitors would show an image full screen to ordinary resolution (800 x 600 or 1024 x 768).  I use these as secondary monitors, with my laptop as main screen.  I have check all monitor activity through the interface of the Intel HD 3000 graphics driver.  The pilot is the last available from Dell (9.17.10.3040).

  However, now when I plug in this House, secondary monitors show an image in a hurry (abscissa) and the single resolution options offered by the pilot are 1366 x 768 and 4 x 3.  Yes, FOUR by THREE pixels.  None of these are the native resolution (which should be 1024 x 768).  Nothing I can will get monitors to display full-screen with good resolution.  My colleague, with (in theory) the same laptop has no problem.

  There also seems to be some sort of cache or memory for monitor configurations.  Whenever I drop down to a workstation, Windows automatically configures the monitors in the way they were last time I was there (so with the monitors in the correct locations, resolutions, etc.).  Is it possible to reset this memory, so that I can start from scratch?

  Hello

  Please contact Microsoft Community. I imagine the inconvenience that you are experiencing right now. The issue you described can occur due to the incompatibility of the display drivers. So let me help you with that.

  You did changes to the computer before the show?

  I suggest you to follow the steps mentioned below and check if it helps:

  Uninstall and reinstall the display driver

  First download the display driver and save it to the computer. You can download the latest driver to display from the link below.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=XGPWM

  Uninstall the display driver, then reinstall it. Follow the steps mentioned below to uninstall:

  1. Press Windows + R, type devmgmt.msc , and then click ok.
  2. Search now and do a right-click on the display driver , and then click Uninstall.

  For your reference, you can check the links below.

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  Hope this information is useful. Please get back to us if you need further assistance.

   

   

• Resolution of Photoshop problem

  Hi guys,.

  When I open photoshop on my new Dell XPS 13 (Windows 10), the photoshop window is much too large for my screen resolution. I have to reduce the resolution of the screen in order to make photoshop work properly.

  I do not suffer the same problem with Adobe Illustrator, it works perfectly with my original resolution.

  You guys know what could I do to fix this annoying problem?

  
  Thank you very much

  Laurent

  Adobe is looking at the scale of a mid-range, as many people complained about this. I don't know when this might happen. PS is totally different from the AI is not really a simple question. They must recreate ALL icons in PS. It is not just a matter of their scaling.