"barcodereader' in Cascades-examples example is broken using SDK Gold

Similar Questions

• Based reading Serial and example of writing used in a graph

  Reading and writing labview example I get responses like '250 v' and "v 3000".  How to make just the "250" and "3000", as the right type of data, put in a table or a chart?  All opinions are appreciated.  Thank you!

  Best solution is probably to use an instrument for any device driver you contact.

  The other method would be a simple analysis of chain.

  

• BlackBerry Dev Alpha & Cascades example 10

  I'm running through the example to create your first application Cascades with him comes out BlackBerry Dev Alpha Simulator (running on Mac OS X 10.7.3) 10 and problems to make the MyFirstApp running (I'm running the App on this page section: https://bdsc.webapps.blackberry.com/cascades/documentation/getting_started/first_app/lightning_cross... - I get the error "Cannot start MyFirstApp due error 8" on the Simulator and "Impossible to") determine PID returned to launch' error in the IDE. Has anyone else encountered this problem?

  Thanks in advance

  Simon

  Please ensure that you deploy the x 86 target and not the ARM variant to the Simulator.

  Daryl

• Example of application using json or xml

  Hello

  I am new to blackberry. can any body have examples of connection authentication code, in which we pass user name and password, once we get respone in json or xml.

  If sombody have runing code please help me...

  Mr President, in fact, I know there are two type of request is GET and other POSITIONS. In both we get respose, but if I want to send encrypted url, so I have to use the POST request. So I want to just how we can use the POST request. ? get a respone.

  Example connection authentication. in which we sends the user name and password if username and password (ask the waiter) is right, then his answer is true otherwise false.

• Simple examples out there using external resources JMS?

  We designed the project with EJB3 and need a way to communicate back with AquaLogic 6.0. We'll do this via JMS, I was wondering if anyone had any simple examples of using JMS like that?

  Here is a link to a zip file which may help you: http://www.4shared.com/file/138563568/ed8cdb75/MQ_Series_with_ALBPM.html

  Inside of this zip, there is a PDF that documents how to hit MQ of ALBPM. It is not official Oracle documentation, but is what we wrote a few years when we were working with MQ JMS integration.

  He wrote for ALBPM 5.7, but three external resources, you will need are documented:

  you will need an external resource Java that introspects the POJO Java 6

  a JNDI provider / J2EE Application Server and

  a JMS queue / JMS Messaging Service

  Be sure to use the generic JMS client application I've included with this zip. This allows to quickly test connectivity for WebSphere MQ (or any other JMS broker). You sometimes find you spend hour trying to integrate with back-end services (be it a JMS broker or another type of integration) to find out hours later that the parameters provided were incorrect. Once it has been tested and work ouside Oracle BPM, it is usually easy to get things working inside the Oracle BPM.

  Hope this helps,
  Dan

• What are three examples of displays used in keyboarding and more columnar and flowcharts?

  In typing, working column is an example of a simple display, while a diagram is an example of an advanced view. I need three other examples of each type of display.

  Simple display examples are:

  -Menus

  -Invitations

  -Work columnar

  -View resolved and unresolved

  -Maps

  -1 & 2 page programs

  -Flyers

  Advanced display examples are:

  -Newsletters

  -Graphics

  -Organization charts

  -Organization charts

  -4-6-8 page brochures

• How I fix an image especail as my icon of folder without changing, for example, when I use the file in an other cumputer, the image of the icon disappeared and show my folder with the usual icon?

  • Hello
  • I'm trying to prepare my project, so I use a funny icon instead of the normal image for my icon, my folder icon, but when I cut & paste it in another location, or use the folder to another computer my my icon disappears and show my folder as another icon of folder that you see in all the computers.
  • What should I do?
    

  You can't do anything. The icon is the local computer. If you move the folder to another PC, the icon will be missing.

• Does anyone have an example VI for using the SendInput function in User32.dll?

  Hi all

  I am creating a VI that creates a click of the mouse.  I looked at the MSDN Web site and found that I need to use the SendInput function in User32.dll.  The problem is that some of the parameters for this function are nested structures.  How to use this function in a call library function node?  Is there already a LabVIEW wrapper for this function?

  Thank you

  MechEman

  I would use rather MouseEvent.  I looked at my VI and it can be cleaned up a bit, but it works for what you want to do.

• Anyone have an example of success using Eloqua and PPC?

  If you got Eloqua with a PPC (pay per click) and had success campaign, please share! I have clients asking for it. Thank you!

  Hey Karin,.

  Going back about 4 years ago, but at Polycom, we organized several campaigns to sponsored links - one for each division and an institutional campaign, by quarter.  Each campaign has its own budget.  Every PPC advertising went to the Eloqua landing page offer of this announcement.   We used a 2 column for the landing page layout; left side straightened supply, the benefits of the offer, an image, other content, and the right side has a form for submission (fill out the form below to access the information package (or white paper, or ebook, or coupon, etc.).)   Each shape/landing page had a particular ID of CRM campaign.  Some authors of campaigns we added directly in the CRM update program and sent to the turnover for the follow-up and other reporting of campaigns, we walked in feeding programs.  The Declaration of CRM, we could see if none of these campaigns produced opportunities/income.

  Two things we tried which worked well:

  (1) we have added video clips of the product which has been associated with that offer/campaign and found that increased our conversion rates on landing pages. Then, we implemented video clips on all landing pages. Nice A / B testing.

  (2) add us 'Chat' to the PPC LP's. We had a cat PPC campaign identification code (our web team helped us with that) so that the calls that came via the cat were placed under the correct in the CRM campaign so that we could follow recipes to the contacts. We did not put a different PPC cat campaign for each campaign, but was a general PPC cat campaign.  At least it gave us some info considered.

• Need code examples for the use of the PL/SQL and popup areas

  Hi all
  
  I looked at the documentation, but it does not explain how to use it.
  I need to create a region using PL/SQL to retrieve data from the tables and print it on a plain HTML page/region I use APEX 4.0.2 and DB Oracle 11i
  
  Thank you!

  Hello

  You can do like this:

  DECLARE
  NUMBER OF V_SAL;
  BEGIN

  SELECT NVL (SUM (salary), 0)
  To emp_sal WHERE the emp_id =: P170_emp_id
  IN V_SAL;

  HTP.p (')

  
  
  
  
  
  

  Salary
  '|| LTRIM (TO_CHAR (NVL(V_SAL,0), 'FML999G999G999G999G990D00')) | »

  ');
  END;

• Impossible to debug the example provided with the SDK projects

  Hey there.
  Just recently I started learning the SDK AE. After reading the first two pages of the Guide to the software development kit, I decided to try to build/debug examples of projects in visual studio.
  I tried with the model project "Skeleton" and with the "Resizer effect" project, but the two I can't seem to make it work.

  I set the environment variable AE_PLUGIN_BUILD_DIR for the correct path, and I also made sure visual studio debug using AfterFX.exe
  However, if I try to launch the visual studio debugging (F5)... nothing happens. After effects opens, but nothing happens after that.

  I checked my output log and... Well well full of messages like:

  
  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\AudioFilters.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\ProjectConverterHost.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\TransmitHost.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\DisplaySurface.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\FLT.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\RG.dll. Cannot find or open the PDB file.
  There are many more of these erros... basically for each DLL in the \Support Files\ folder.

  At the end of my output log, I have the following:

  < 5060 > < AppVers > < 5 > App Version = Version 13.5.1.1x48

  < 5060 > < AppDirs > < 5 > App Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  The executable < 5060 Dir > < AppDirs > < 5 > = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  Resources < 5060 > < AppDirs > < 5 > Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  Package < 5060 > < AppDirs > < 5 > Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  < 5060 > < AppDirs > < 5 > Plugin Dir = C:\Program Files\Adobe\Adobe after effects CC Files\Plug-ins 2015\Support

  < 5060 > < AppDirs > < 5 > required Dir = C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Required

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\aeres1.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): unloaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\aeres1.dll.

  The program ' [3244] AfterFX.exe "ended with code 0 (0x0).

  
  

  
  

  Can someone tell me what I'm missing?

  Well, it is normal that if you launch AE in the debugger, nothing different happens if you launch AE normally. Which means that you must create or load a project and apply your plugin, so you can stop in the debugger (unless you want to catch global initialization, which is made on the loading of the program).

  With regard to the PDB messages in the journal, which is quite ok, as the Adobe dll plugin obviously would not come with debug information.

  The plugins you've compiled are born actually in the correct path? They are available in the menu effects in AE? It is the first thing to check, because when there is not this plugin, debugging is not available :-)

  I interpreted your question so that your .aex files are actually present and visible on EI, you just can't break into the debugger when one of them is used.

  So for your plugin, you must make sure that it contains debug information, otherwise you will not be able to debug.

  Please check the following settings for your project in Visual Studio:

  "C/C++" - "Debug Information Format" value "Program Database"

  "C/C++ - preprocessor"-"Preprocessor Definitions" string contains the "_DEBUG" set

  "C/C++ - Code generation '-'Runtime Library' is defined is ' / MTd ' or ' / MDd" (this is the most common error when unable to debug!)

  ' Linker - debugging - 'generate debugging information' set to 'Yes "".

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• How to avoid using several golds?

  I have a query that returns a number where I have to change some text if this number fits my criteria... the code looks like this (just an example)
  
  < name cfquery = "getNumber" datasource = "#Application.dsn #" >
  Select SomeNumber
  Users
  Where blah = blah
  < / cfquery >
  
  Is there a cleaner way to do this? (see code below)
  
  Thanks for your help.
  

  Set the values you want to add to a list, then do this:

  
  Found!
  
  Did not find it
  

• ODI smart import using sdk

  I'm getting smart import using code below

  New SmartImportServiceImpl impl = SmartImportServiceImpl (odiInstance);

  String xmlfile = ' C: / users/608600862/Desktop/xml/SmartExport"; "

  impl. importFromXml (xmlfile);

  me gives following error

  

  If I import the same exported file using the ODI studio, he is transferred successfully

  I googled a lot but no luck

  Please help me solve this error

  SmartExport works well, but SmartImport above gives me error

  exported file is generate using the smart studio odi export option

  I read somewhere that we must be used SAXParser, but where and how not to get.

  Help, please

  my error solved

  Compile using - javac - classpath \oracledi.sdk\lib\.; \oracledi.sdk\lib\* SmartImport.java

  Run using - java - Djavax.xml.parsers.SAXParserFactory = oracle.xml.jaxp.JXSAXParserFactory - classpath. / ; \oracledi/client/modules/oracle.xdk_11.1.0/xmlparserv2.jar; \oracledi.sdk\lib\.; \oracledi.sdk\lib\*;. SmartImport ojdbc6.jar

  NOTE: do not change any slash('/'or'\') backward or forward, just replace by your odi_home. provide command line arguments according to the requirement of your class.

  Thank you

  Deepali.

• The value of VM OS Type using SDK Perl v5?

  I'm trying to define the type of operating system of a shell of the virtual machine using version 5 of Perl SDK and get an error.

  Code snippet:

  $guestid = "sles11_64Guest".

  My $guestid = VirtualMachineConfigInfo-> new (ID = > $guestid);

  my $spec = VirtualMachineConfigSpec-> new (ID = > $guestid);

  my $task = $vm_view-> ReconfigVM_Task (spec = > $spec);

  The returned error is as follows:

  String: An error occurred during the configuration of the host.

  Detail: PlatformConfigFault

  Any help that can be provided would be greatly appreciated.

  Thank you.

  Hello

  You had it right to $spec, if you take a look at the vSphere API Ref - http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.wssdk.apiref.doc_50%2Fvim.vm.ConfigSpec.html

  ReconfigVM_Task() supports property spec which is a VirtualMachineConfigSpec and which has a property named ID, which is just a string.

  You must have the following:

  $guestid = "sles11_64Guest".

  my $spec = VirtualMachineConfigSpec-> new (ID-online $guestid);

  My = $vm_view $task-> ReconfigVM_Task (spec-online $spec);