Base Directory of system target

Similar Questions

• change the name of the base directory

  How can I change the name of the BASE DIRECTORY? without loss of all files, programs and information.

  IM alredy see this: change the name of the OS X user account and the name of folder on your Mac - Apple Support

  but nothink on the name of the BASE DIRECTORY.

  A user of instant messaging on this MBP and administrator also me.

  Step 2 under Lion or later:

  Go to the folder on the startup disk users. The users folder contains the base folder of the account that you are renaming. Rename the folder for this account, and note the old name and the new name. When you rename the folder, you will be prompted to enter the name administroator and the password that you used to connect.

  But note that you must be logged in as a different user you are trying to rename. So, you will need to create a new account and allow him to administer the computer. Connect to this user and follow the instructions in the link you provided.

• display the base directory in the finder

  How to view the base directory in the finder?

  Click on an empty space on the desktop to activate the Finder.

  Finder > Preferences > Sidebar > show these items in the sidebar

  Check the box next to the Home icon.

• LabVIEW base, protocols supported system of development and the basic features

  Hello

  I ask this question here because I can't find that information on the web, or I get the technical support e-mail response. We are interested in acquiring a license of basis of Labview to start development to develop test for simple automation systems. The basic idea is to have a card with digital, analogue i/o, common seria interfaces: RS232, Ethernet, I2C or SPI. All this to interface HW under test.  A single port for communication with the PC (USB, Ethernet, RS232).

  We would like to know:

  (1) what protocols are supported by the Labview Base development system package.

  (2) if the license mode allows you to integrate MATLAB/C/C++ code.

  (3) in general, where a document that provides details on the characteristics of the Labview. We were not able to find a manual for it. Just this very basic with informaton purchase link: http://sine.ni.com/nips/cds/view/p/lang/no/nid/1385.

  Kind regards

  Jose

  Have you looked at the page 'Buy' for LabVIEW? http://www.NI.com/LabVIEW/buy/

  Basically, I think that LabVIEW base supports everything in terms of basic Windows protocols, but does not include LabVIEW RT or FPGA (for CompactRIO/FPGA targets) but you can use series, ethernet, etc. DAQmx for windows (and also the instrument 3rd party drivers). It doesn't have the enhanced math library or the application Builder so that you can not create executables/installers - you will need run your code in the development environment.

  Alternatively, you can call external code .NET / C dll through the call library function node. You will not be able to incorporate Mathscript, because it is only in the complete edition upward.

• EventHandler process post for all the user records in the system target

  Hi Experts,
  
  My environment: IOM - 11.1.1.5, Sun Directory Server - 5.2
  I did after,
  
  1. implement the recon trust with Sun's LDAP
  2. I was able to read the sun ldap users to the IOM
  3. I wrote the post event handler process for updating the user password. It works fine if the connector gets only a new user
  4. size of the batch = 0, in iPlanet Planner recon trusted user.
  
  My Question:
  
  In my target system, I have 100 users, for recon trust I need calling the game/Manager events vertical process of post for all 100 records and update process. Now, it runs only for the last record not for all records.
  
  My event handler is,
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" >
  <! - custom event handlers process post - >
  < class = "Manager com.custom.eventhandlers.CustomPostProcessEventHandler of shares" kind of entity = "User" operation = "CREATE" name = "CustomPostProcessEventHandler" order = "8000" stage = 'postprocess' sync = "TRUE" / > "
  < / eventhandlers >
  
  I do with sync = TRUE-> FALSE?
  
  Please give your suggestions.
  
  Thank you

  The event handler will trigger in the BulkExecute. In this code, you must loop through all entries and not just the last.

  You do this in your code?

  -Kevin

• Base the peripheral system missing for 7 ultimate - HP dv6000 Notebook pc

  Hello people!

  I have 3 missing base system device driver and an unknown device. My pc is a HP Pavilion DV6 laptop

  model number NU765EA #AB9

  The original was VISTA and now I have installed windows 7 ultimate.

  Hardware ID

  Bus PCI 6, device 0, function 4

  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Bus PCI 6, device 0, function 3

  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  Bus PCI 6, device 0, function 1

  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  UNKNOWN device

  the Controller Interface LPC Intel(r) ICH9M - 2919

  ACPI\ENE0100
  * ENE0100

  Thanks a lot for your help!

  Hello

  Download and install the following drivers.

  Card reader.

  Protect HDD Smart Protection.

  Kind regards

  DP - K

• Windows - message of corrupted file the file or directory c:\System Volume Information\_restore{106cf321-99A3-4E3A-9103-1BD02760-6A99}\rp687 is damaged and unreadable.

  the Information\_restore{106cf321-99A3-4E3A-9103-1BD02760-6A99}\rp687 Volume of c:\System file or directory is corrupted and unreadable. Run the chkdsk utility. I tried to run chkdsk but it does not work. I can't start the defragmentation either. I tried to run chkdsk on a restart and it does not start in safe mode it is running in read-only and shows errors but does not fix the

  You must run chkdsk with the "/ r", and/or switches 'f' for the errors to fix.

• How do I cancel the target account without deleting the user in the system target?

  Hello Experts,
  
  We need to know if it is possible to revoke a resource (delete account), without deleting the user in the target system.
  
  Example:
  
  UserOim1 in IOM has a resource of SAP ECC, is linked to the SAP UserSap1user.
  We need assign SAP UserSap1 user to another user of IOM UserOim2.
  So we'd like to broke the link between UserOim1 and UserSap1 (without deleting the SAP user) and then connect the SAP with UserOim2user.
  
  
  Is this possible?
  
  Best regards
  AT

  If you move a resource from one user to another, there is a process of service account for this.

  Using the API under tcUserOperationsIntf, you can use changeToServiceAccount. Next moveServiceAccount will move to the instance from one user to another, and finally chageFromServiceAccount turn off the type of service account.

  This account must really be identified as a service before all the shares of account account occur however. There should be no other reason to switch from a users account. If the account is defined as a service from the beginning account, simply attach existing adapters for the tasks of service account. They will fire instead of disable regular and delete tasks. I think that you will always have questions if the revoke occurs, and then you run these tasks because all the other tasks will be canceled State.

  -Kevin

• Questions about the creation of the db on the system target after the clone...

  Hello
  I will create a clone of the EBS system...
  It would be the first time...
  In any case, read the note from doc: 230672.1 on the creation of the db, I have the following wonders:
  (1) article 2: Clone Oracle Applications 11i

   point 2b: Copy the database tier file system
  
                 It is not reffered anything about the control files... Are they going to be created using the command (Step 3a) ???:
  
           cd <RDBMS ORACLE_HOME>/appsutil/clone/bin
  
           perl adcfgclone.pl dbTier    
  
  
  
  2) On Appendix  B: Recreating database control files manually in Rapid Clone.
  
  it is referred that contro files need to be created manually if cloning is done when the database are on raw partitions or hot backup cloning(while the db is in open mode)...
  
  Can you please explain the first term.....I have not been satisfied by the explanation i found...
  
  I would be grateful .......(in order to decide what exactly steps to follow).....

  Note: I use EBS 11.5.10.2
  Thank you
  S

  (1) article 2: Clone Oracle Applications 11i
  point 2(b): copy the file level data base system
  It is not referred to anything on the control files... They will be created with the command (step 3A)? :
  CD /appsutil/clone/bin
  Perl adcfgclone.pl dbTier

  Fix. Quick clone will create controlfiles for you. You just need to issue "prel adcfclone.pl dbTier" here.

  (2) Annex b: manually re-create database control files in quick Clone.
  It is mentioned that control files must be created manually if cloning is performed when the database are on raw partitions or backup to hot cloning (while the db is in open mode)...

  OK, controlfiles must be created manually.

  Can you please explain the first term... I have not been satisfied by the explanation that I found...
  I would be grateful... (to determine what exactly the steps to follow)...

  Section 2--> follow the steps if you have a cold backup of the database.

  Appendix B--> follow the steps if you have a hot database backup.

• (Redirected) The base Aurora r4 system fan failure

  Hi I am having problems with my r4 aurora. the fan failure system from time to time at boot. Alienware thermal control always indicates that the system is at 0%, but the fans work physically. I'll try to post a screenshot of him when I got home. His is my r4 Mithraeum my 1st died after 4 months of owning my r4 is now the replacement and my warranty expired in March last someone can help me out thanks in advance.

  Note: I barely use my work schedule loaded r4

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Base directory linking

  I am creating a site that will have several members. However, I would like to computing if someone could come to the site like this:
  
  www.SiteName.com/username
  
  rather than:
  
  www.SiteName.com/members/index.cfm?View & MemberName
  
  Is there a tutorial somewhere where I know how to do this. I am currently using a friendly link system SE but they still look like:
  
  www.SiteName.com/members/index.cfm/View/MemberName
  
  Thanks in advance for your expertise

  www.SiteName.com/username is a mapping, you must configure your Internet (not your application server) server. If you want to automate the process, you would probably find a way to write a script to interact with any web server you use (Win, Linux, Unix, etc.). I hope you get a good answer to your question on this forum, but its probably little unlikely due to the object. It would be a better place to post this question on a site dedicated to server technology.

• Corrupt Windows file. "the file of the directory g:\system information\lightningsand.cfd volume" is damaged and unreadable. My computer does not display a G drive. My computer will boot even after I get this error message.

  The problem started after I installed Norton 360. I have not installed new hardware.

  I'm not biased. I'm not an advocate for the Member States. I have been involved in the MS newsgroups since 2003 and have seen what Norton (McAfee) and can do. Especially for an e-mail client.

  I saw, too, what MS has produced over the years and don't like a lot of their programs. I feel, however, that they got the right MOUSE. It is not a resource hog like Norton is a thing. (BTW. IMHO, Norton was a great AV program until Peter Norton sold the company to Symantec).

  I saw many problems corrected over the years with the removal of Norton. The most common problem people have when vendors group with their Norton software free trials. Once enabled, run that the removal tool is a must if the user wishes to use a different AV program

  Note the declaration of the OP.

  
  The problem started after I installed Norton 360. I have not installed new hardware.
  

  If you have spent a lot of time on the Norton forum and believe my advice to be bad, why not offer the OP is something that you think might be useful rather than criticizing me.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The product key on the basis of the system is worn and cannot be read. I need a new.

  My product label is old and worn on

  I need to speak to a representative of the Microsoft Customer Service about obtaining a new product key. because the tag on my laptop is rubbed off.  After several attempts to find a center of electronic mail, or a center of discussion online, I was brought to the forums. so, how can I get in touch with a legitimate Microsoft Customer Service representative?

  Lost or misplaced product key (certificate of authenticity)

  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?

  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:

  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

  For more information on this topic, visit http://support.microsoft.com/kb/811224

• How to stop the process in a base directory? tnslsnr

  Hello
  When I try to upgrade the database to 10.2.0.3.0 10.2.0.1.0, I stop all the databases and listner but I get the following error? Please tell me how to fix it?
  
  The following processes need to be stop befor continues:
  tnslsnr
  
  Thank you
  Goussard

  That means that your listener is not shut down cleanly.

  Try to check your status of listener again

  lsnrctl status

  and stop it again. See also listener.log for error.

  as a last resort. kill the process.

• Cloning of post question

  Hi expert,
  I did migrate my 32-bit applications to 64-bit on linux platform. My production goes well, butnNow I want a clone machine to test the object. But I am facing following error. My postclone log file displays this error.
  
  
  
  Target System Hostname (virtual or normal) [test]
  ANSWER:
  test
  
  GUEST:
  The target instance is RAC (y/n) [n]
  ANSWER:
  n
  
  GUEST:
  Target system SID database
  ANSWER:
  PROD
  
  GUEST:
  Base Directory of system target
  ANSWER:
  / oradb02/Oracle/prod
  
  GUEST:
  Target list directory utl_file_dir system
  ANSWER:
  / usr/tmp, / usr/tmp/usr/tmp, /u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/VIS_ebs
  
  GUEST:
  Number of DATA_TOP on the target [1]
  ANSWER:
  1
  
  GUEST:
  Target system DATA_TOP directory 1 [oradb02/oracle/PROD/db/apps_st/data]
  ANSWER:
  / oradb02/Oracle/prod/DB/apps_st/Data
  Creation /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/clone/data/stage/addbhomtgt.xml which will contain the database of target system mount points.
  
  GUEST:
  Target system RDBMS ORACLE_HOME [oradb02/oracle/PROD/db/tech_st/10.2.0] directory
  ANSWER:
  /oradb02/Oracle/prod/DB/tech_st/10.2.0
  Creation /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/clone/data/stage/addbhomtgt.xml which will contain the database of target system mount points.
  
  GUEST:
  You want to preserve the display [null] (y/n)?
  ANSWER:
  n
  
  GUEST:
  Display of the target system [test: 0.0]
  ANSWER:
  0
  
  GUEST:
  Do you want the target system to have the same port values as the source (y/n) [o] system?
  ANSWER:
  There
  Database Port test check: Port = 1521 value
  Available database port: Port = 1521 value
  Verification test DB ONS Local Port: Port value = 6300
  DB ONS available Local Port: Port = 6300 value
  Audit DB ONS remote Port on test: Port 6400 = value
  DB ONS available Remote Port: Port 6400 = value
  setDestination s_contextfile at: /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/PROD_test.xml
  Clone context parameters:
  Pairs of file = /tmp/adpairsfile_19547.lst
  XML file to target = /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/PROD_test.xml
  Template file = /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
  
  
  The following values will be used to create the context file
  
  ****************************************************
  
  s_isWeb = YES
  s_db_util_filedir = / usr/tmp, / usr/tmp/usr/tmp, /u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/VIS_ebs
  s_dbhome4 = / oradb02/oracle/PROD/db/apps_st/data
  s_dbhome3 = / oradb02/oracle/PROD/db/apps_st/data
  s_dbhost = test
  s_db_oh = /oradb02/oracle/PROD/db/tech_st/10.2.0
  s_dbhome2 = / oradb02/oracle/PROD/db/apps_st/data
  s_dbhome1 = / oradb02/oracle/PROD/db/apps_st/data
  s_dbgroup = s/n
  s_dbGlnam = PROD
  s_dbdomain = isl.com
  s_dbSid = PROD
  s_dbuser = oracle
  s_isForms = YES
  s_database_type =
  s_temp = /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/temp
  s_db_ons_localport = 6300
  s_hostname = test
  s_dbSidLower = prod
  s_cmanport = 1521
  s_dbCluster = false
  s_domainname = isl.com
  s_isAdmin = YES
  s_isConc = YES
  s_contextfile = /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/PROD_test.xml
  s_dbport = 1521
  s_display = 0
  s_contextname = PROD_test
  s_db_ons_remoteport = 6400
  s_clonestage = /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/clone
  s_base = / oradb02/oracle/PROD
  ****************************************************
  
  Context of clone now apply repeatedly changes
  to create the new target context file.
  
  instantiate the file:
  Source: /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/temp.xml
  dest: /tmp/tmpCtxClone.xml
  instantiate the file:
  Source: /tmp/tmpCtxClone.xml
  dest: /tmp/tmpCtxClone.xml
  instantiate the file:
  Source: /tmp/tmpCtxClone.xml
  dest: /tmp/tmpCtxClone.xml
  instantiate the file:
  Source: /tmp/tmpCtxClone.xml
  dest: /tmp/tmpCtxClone.xml
  instantiate the file:
  Source: /tmp/tmpCtxClone.xml
  dest: /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/PROD_test.xml
  instantiate the file:
  Source: /oradb02/oracle/PROD/db/tech_st/10.2.0/appsutil/temp.xml
  dest: /tmp//dummy.xml
  instantiate the file:
  Source: /tmp//dummy.xml
  dest: /tmp//dummy.xml
  instantiate the file:
  Source: /tmp//dummy.xml
  dest: /tmp//dummy.xml
  instantiate the file:
  Source: /tmp//dummy.xml
  dest: /tmp//dummy.xml
  instantiate the file:
  Source: /tmp//dummy.xml
  dest: /tmp//dummy.xml
  
  The values of these variables will be selected from the context of the source
  
  
  ****************************************************
  
  s_admin_restrictions = OFF
  s_metalink_id =
  s_parallel_max_servers = 8
  s_systemcsi = n/a
  s_apps_version = 12.0.6
  s_contextserial = 0
  s_instThread = 0
  s_sqlnet_expire_time = 10
  s_contexttype = database context
  s_db_sga_target = 1 G
  s_dbsharedpool_size = 300000000
  s_db_shared_pool_size = 400 M
  s_clusterServicePort = 9998
  s_dbcache_size = 163577856
  s_rapidwizloc = / oradb02/StageR12/startCD/Disk1/rapidwiz
  s_db_pga_aggregate_target = 1 G
  s_dbtype = PROD
  s_proxyhost =
  s_nthreads = 5
  s_db_processes = 200
  s_enable_listener_password = OFF
  s_alt_service_instances =
  s_dbClusterInst = 1
  s_installedFrom = FS
  s_undo_tablespace = APPS_UNDOTS1
  s_adjreopts = - Xms128M-Xmx512M
  s_dbQuorumDisk =
  s_db_linkctrl =
  s_dbcomp = oracle.apps.dbseed.fresh
  s_db_sessions = 400
  s_installloc = / oradb02/StageR12/startCD/Disk1
  s_isDB = YES
  s_proxyport =
  s_database = db102
  s_dbseed = install fees
  s_apps_user = APPS
  s_dbfiles = 512
  s_db_shared_pool_reserved_size = 40 M
  s_bits = 64
  s_dbblock_buffers = 20000
  s_sys_user = SYS
  s_dlsnstatus = active
  s_db_plsql_native_library_subdir_count = 149
  s_country_code =
  s_subscribe_for_node_down_event = OFF
  s_instNumber = 0
  
  *********************************************
  
  
  The new context file was created:
  oradb02/Oracle/prod/DB/tech_st/10.2.0/appsutil/PROD_test. XML
  
  *******************************************
  
  Cleaning of file system specific to the Migration of the platform of the scene:
  
  
  
  StackTrace:
  java.lang.NullPointerException
  at java.util.Hashtable.put (unknown Source)
  at oracle.apps.ad.clone.util.CloneCleanser.doMigrate(CloneCleanser.java:98)
  at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:697)
  at oracle.apps.ad.context.CloneContext.main(CloneContext.java:4801)
  
  RC-50004: an error occurred in CloneContext:
  null
  Creating context files not be successful.

  moeenuddin wrote:
  Hussein in fact I've done this activity with silly way :) it's why I can't share on the forum. .

  We always learn from our mistakes :)

  Thank you
  Hussein