Recovery utility fails with a WRONG Machine!

Similar Questions

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• BIOS Flash Utility fails with "BIOS directory is not found."

  I have download the 32-bit BIOS update 6fuj35us.exe and crossed the ThinkPad BIOS Update Utility Setup Wizard. After I click on finish, I accept the option Update my BIOS. He is unable to start the process of flashing with the error popup: 'the BIOS directory is not found. The utility may not be completed. "I tried the image ISO too, it burns and started successfully, but I got the exact same error message when I tried to launch the flash.

  Anyone have this problem?

  Thank you

  I had to send my machine back for a motherboard replacement.  Fortunately, they returned it quickly, two days, as soon as allows shipping.

• Based recovery sequence failed with RMAN

  I'm on the Oracle 10 g database, recover the database with RMAN, but get the following error:
  

  RMAN> RUN {
  2>  allocate channel c1 device type disk;
  3>  SET UNTIL SEQUENCE 560 THREAD 1;
  4>  RESTORE DATABASE;
  5>  RECOVER DATABASE;
  6>  ALTER DATABASE OPEN RESETLOGS;
  7> }
  using target database control file instead of recovery catalog
  allocated channel: c1
  channel c1: sid=155 devtype=DISK
  
  executing command: SET until clause
  
  Starting restore at 17-DEC-11
  
  channel c1: restoring datafile 00001
  input datafile copy recid=438 stamp=770148096 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSTEM_7DO6D8OH_.DBF
  destination for restore of datafile 00001: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
  channel c1: copied datafile copy of datafile 00001
  output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF recid=476 stamp=770163113
  channel c1: restoring datafile 00002
  input datafile copy recid=437 stamp=770148095 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_UNDOTBS1_7DO6GHJM_.DBF
  destination for restore of datafile 00002: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
  channel c1: copied datafile copy of datafile 00002
  output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF recid=477 stamp=770163125
  channel c1: restoring datafile 00003
  input datafile copy recid=439 stamp=770148099 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSAUX_7DO6FOWS_.DBF
  destination for restore of datafile 00003: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
  channel c1: copied datafile copy of datafile 00003
  output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF recid=478 stamp=770163150
  channel c1: restoring datafile 00004
  input datafile copy recid=435 stamp=770148086 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_USERS_7DO6HGMK_.DBF
  destination for restore of datafile 00004: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
  channel c1: copied datafile copy of datafile 00004
  output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF recid=479 stamp=770163155
  channel c1: restoring datafile 00005
  input datafile copy recid=434 stamp=770148086 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_EXAMPLE_7DO6GYNZ_.DBF
  destination for restore of datafile 00005: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF
  channel c1: copied datafile copy of datafile 00005
  output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF recid=480 stamp=770163166
  channel c1: restoring datafile 00006
  input datafile copy recid=436 stamp=770148087 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_GL_7DO6HKGN_.DBF
  destination for restore of datafile 00006: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\GL.DBF
  channel c1: copied datafile copy of datafile 00006
  output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\GL.DBF recid=481 stamp=770163171
  Finished restore at 17-DEC-11
  
  Starting recover at 17-DEC-11
  channel c1: starting incremental datafile backupset restore
  channel c1: specifying datafile(s) to restore from backup set
  destination for restore of datafile 00001: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
  destination for restore of datafile 00002: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
  destination for restore of datafile 00003: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
  destination for restore of datafile 00004: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
  destination for restore of datafile 00005: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF
  destination for restore of datafile 00006: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\GL.DBF
  channel c1: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_12_15\O1_MF_NNND1_ROLLING_7GNH6QRF_.BKP
  channel c1: restored backup piece 1
  piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_12_15\O1_MF_NNND1_ROLLING_7GNH6QRF_.BKP tag=ROLLING
  channel c1: restore complete, elapsed time: 00:00:16
  
  starting media recovery
  
  archive log thread 1 sequence 564 is already on disk as file D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_564_7GS2KRCQ_.AR
  C
  archive log filename=D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_564_7GS2KRCQ_.ARC thread=1 sequence=564
  unable to find archive log
  archive log thread=1 sequence=1
  released channel: c1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of recover command at 12/17/2011 22:13:22
  RMAN-06054: media recovery requesting unknown log: thread 1 seq 1 lowscn 13985223
  
  RMAN> **end-of-file**

  But the 560 archived log file are:
  

  RMAN> list copy;
  
  
  List of Datafile Copies
  Key     File S Completion Time Ckp SCN    Ckp Time        Name
  ------- ---- - --------------- ---------- --------------- ----
  438     1    A 17-DEC-11       13763828   08-DEC-11       D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSTEM_7DO6D8OH_.DBF
  437     2    A 17-DEC-11       13763828   08-DEC-11       D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_UNDOTBS1_7DO6GHJM_.DBF
  439     3    A 17-DEC-11       13763828   08-DEC-11       D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSAUX_7DO6FOWS_.DBF
  435     4    A 17-DEC-11       13763828   08-DEC-11       D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_USERS_7DO6HGMK_.DBF
  434     5    A 17-DEC-11       13763828   08-DEC-11       D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_EXAMPLE_7DO6GYNZ_.DBF
  436     6    A 17-DEC-11       13763828   08-DEC-11       D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_GL_7DO6HKGN_.DBF
  
  List of Archived Log Copies
  Key     Thrd Seq     S Low Time  Name
  ------- ---- ------- - --------- ----
  312     1    556     A 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_09\O1_MF_1_556_7G4H1FKL_.ARC
  313     1    557     A 09-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_09\O1_MF_1_557_7G4J59WS_.ARC
  314     1    558     A 09-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_10\O1_MF_1_558_7G76F9C7_.ARC
  315     1    559     A 10-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_11\O1_MF_1_559_7G9SSKC7_.ARC
  316     1    560     A 11-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_12\O1_MF_1_560_7GDHDFL2_.ARC
  317     1    561     A 12-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_13\O1_MF_1_561_7GH5GDNZ_.ARC
  318     1    562     A 13-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_14\O1_MF_1_562_7GKSKNF5_.ARC
  319     1    563     A 14-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_15\O1_MF_1_563_7GN3N4HN_.ARC
  320     1    564     A 15-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_564_7GS2KRCQ_.ARC
  321     1    565     A 17-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_565_7GSC72RF_.ARC
  
  RMAN>

  Kindly help?

  Order now

  SQL > alter database open resetlogs;

  View the contents of the log file alert if any erros yet.

• Windows error recovery, "load failed with error 1009 (STHIVE #0).

  Hello world

  This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

  "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

  "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  There are two options it saying

  -Launch Startup Repair tool

  -Start Windows normally

  When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

  When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

  What should I do now?

  My laptop is "Compaq Presario V3500"

  Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

• system recovery fails with the C++ runtime error

  My Compaq CQ610-410US Windows 7 running is unusable. When you use the system recovery, either from CD or recovery, it fails with C++ runtime library program not found contact HP support. Whatever it is, Windows is loaded and the system restore screens appear. Once I answer to remove all the accessories it fails with run-time error. Two questions: (1) is there a way around it? (2) get new disks from HP recovery even work?

  All I can suggest is to order a set of HP and I hope they work. This error is not a municipality and the provided HP recovery discs should work.

• Laptop HP Emvy 15: System Recovery keeps failing

  Hello

  I'm trying to reinstall original OS (WIN 8.1).  I use three DVD recovery discs provided by HP, but unfortunately for some reason any recovery keeps failing.   Besides the machine will start only in the first DVD.  According to the BIOS, the laptop was built in 2014 (which apparently has some influence on the recovery someware).

  Any assistance woule be appreciated

  Tony

  Hi CherylG,

  This somewhat embarrassing.  My problem was solved when the operating system has been reinstalled.  Initially I contacted HP customer care with a view to see what my chances were to have replaced the operating system.  You see the recovery partition has been deleted by mistake when I was convinced to give a Linux OS a go.  I could not get used and decided to return to Windows.

  Anyway somewhere in the conversation with the customer service "re-install" became "valorisation" and a few days later, a system recovery DVD set arrived on my doorstep.  As you know, I tried various methods to try to resolve the problem without success.   Yet once, I talked to CS and it was decided that I send to the machine to HP (AWA) to Sydney for repairs. One day ortol later that I have received a call from a technician who asked if there were files or data on the hard drive that I need to be saved.  I said nothing on the HARD drive and he said thathe would like to reinstall the OS.  That's what the report says, reinstalled OS and the device.

  I guess the moral of this story is to recover whatever it is there must be something to recover.  That's why I kept getting the message "try to restore system failed" or words to that effect.

  See you soon

  Tony

• Install RDCman 2.2 the use Remote Desktop on windows server 2003 fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  CAN ANYONE HELP?

  Hi Mordi26:

  This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:

  http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• Restore fails with HP recovery disk. Copy of ordinary details of WIn8 will install OK?

  I have weeks of pain, try to restore a HP Envy m6 that failed a few days outside its warranty.

  I tried to reinstall the original recovery partition and recovery disks burned of the original score of the recovery.

  These two failed with error.  Detect an error in the PININST_BBV

  Diagnostic checks suggest that the hard drive may be faulty, so I have replaced and bought a new set of recovery discs HP who believed HP would solve the problem. However, I get the same error. Detect an error in the PININST_BBV

  Installation in all cases seems to be just fine.

  I strongly suspect the recovery process HP is defective but HP you want to load a 34 books just to talk to someone for a few minutes.

  Anyone know if I can install a regular copy of windows 8 purchased in a retail store instead?

  The product key appears to be buried in the BIOS for the moment and I don't know if that will affect activation if I try to install a non - OEM version

  The answers on the help on the original problem would be greatly appreciated.

  With Windows 8, the product key is embedded in the BIOS and is not visible until you install the operating system. When you use an OEM Windows 8 DVD the BIOS automatically fills in the Code of the key.  You can try to do your own installation of Win 8 media using this ISO download:

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Windows Vista SP1 will fail with a message indicating that I have the wrong language pack.

  Vista SP1 fail with Vista Ultimate...

  Hay there. Recently moved to Sweden, the United Kingdom. Installed Vista Ultimate (64 bit). It's a Swedish and Swedish-language facility. There no SP1, but when I download the stand-alone SP1, the installation didn't say that I have the wrong language pack... suggestions?

  Hello

   

  Method 1: Download Service Pack 1 from the given link and see if that helps.

  Windows Vista Service Pack 1 all language standalone (KB936330):

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

   

  Method 2: See the following article:

  Error message when you try to install Windows Vista Service Pack 1: "Windows Vista Service Pack 1 cannot be installed on your computer.

  http://support.Microsoft.com/kb/947876

• Cluster verification utility Oracle failed with the INS-20802 then install 12.1.0.2 on Oracle Linux 7.1 x 64

  Hello!

  You want to install Oracle Clusterware 12.1.0.2 on Oracle linux 7.1 x 64. When installing, everything was fine, except the last step - utility of Cluster Oracle verification failed with the INS 20802.

  In the log file, I found:

  INFO: From audits to clock using Network Time Protocol (NTP) synchronization...

  INFO: NTP configuration file "/ etc/ntp.conf ' verification of the past existence

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs1.

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs0.

  INFO: GLWB-1024: the demon NTP or Service didn't work on one of the nodes in the cluster.

  INFO: PRVF-5415: check to see if the NTP daemon or service runs failed

  NEWS: Control of synchronization using network time Protocol (NTP) failed

  INFO: PRVF-9652: Cluster Time Synchronization Services check failed

  also in xml file like:

  < ELEMENT > Network Time Protocol (NTP) < / ITEM >

  < DESC > this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time). < / DESC >

  < MORE_DETAILS > < / MORE_DETAILS >

  < SUCC_NODES > < / SUCC_NODES >

  < FAILED_NODES >

  < NODE ID = 'pdc-sap-ascs1' > < / NŒUD >

  < NODE ID = 'pdc-sap-ascs0' > < / NŒUD >

  < / FAILED_NODES >

  < GLOBAL_ERROR_DESC_LIST >

  < ERROR_DESC >

  < MSG_TXT > PRVF-5507: NTP daemon or service is not running on any node, but the NTP configuration file exists on the following nodes:

  PDC-sap-ascs1, pdc-sap-ascs0< / MSG_TXT >

  < CASE > the configuration file has been found at a node if no NTP daemon or service was running. < / CAUSE >

  < ACTION > if you plan to use CTSS for time synchronization, then NTP configuration must be uninstalled on all nodes of the cluster. < / ACTION >

  < / ERROR_DESC >

  But of all the nodes ntpd is running:

  [root @pdc-sap-ascs0 ~] # ps ax | grep ntpd

  2214 s + 0 pts/0:00 grep - color = auto ntpd

  19438?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  [root @pdc-sap-ascs1 ~] # ps ax | grep ntpd

  11492 pts/0 s + 0:00 grep - color = auto ntpd

  19090?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  So, why postinstall auditor has not found of ntpd running?

  This situation was prior to installation, I started, but this time I ignored the warning.

  Thank you very much for your answers!

  The problem is that in both servers, I want to use ntp, and I wrote in the configuration on both servers,

  Server ntp.myorg.local iburst

  but we use two IPs for ntp, both resolved through dns servers, so in my case the first server got a single for the ntp server ip address and then got another ip. It was a problem and check postinstall determine that the servers use different time sources and do not like this situation.

  Once I changed ntpd config to use ips, check postinstall succeeded.

• RMAN recovery failed with the incarnation of target of error 03002,11003 and recovery 19906 changed during recovery

  Hi all

  I was cloning a Prod DB (Oracle 10.2.0.5) from tape backup. So the cloning is going on it failed with the below error in RMAN:

  archive log thread = 2 sequence 23044 = filename=+DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.848348137

  output channel: ch01

  output channel: ch02

  output channel: ch03

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 23/05/2014 20:15:48

  RMAN-03015: an error has occurred in the script stored memory Script

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' +DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.84

  8348137'

  ORA-00283: cool cancelled due to errors

  ORA-19906: embodiment of changed during recovery recovery targets

  Any possible solution to the resume and cloning complete successfully?

  Kind regards

  Ritu

  incarnation of the list;

  It listed 2 incarnation. I have reset the previous incarnation

  RESET DATABASE TO INCARNATION 2;

  and recovered again and it solved my problem.

  After that added temp files as usual after failing RMAN duplication;

  After this nest of DB and open reset logs.