BASIC WINDOWS 7

Similar Questions

• Win t Home Basic: windows cannot access \\NameXP

  Connection ethernet desktop, Windows 7 Home Basic:
  Windows cannot access \\NameXP, Err code 0 x 80070035

  Computer NetBook, Windows XP Home Edition, Wireless connection:
  \\NameWin7 is not accessible. You are not allowed to use this network resource

  Working group name is the same on both computers. Both computers are connected to the wireless router and have Internet access, but cannot see each other. Sharing is turned on, and there are shared folders on both computers.

  The problem is on the Netbook computer - I can configure the third computer (Windows XP Professional laptop) to access desktop computers via the wireless.

  Hi VojislavJosimovic,

  ·         Which antivirus program is installed on the computer?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: You can follow this step by step guide and check if it helps.

  Networking of computers running different versions of Windows

  See also:

  Sharing files and printers with different versions of Windows

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

• I think that my system of basic windows files have been changed and currupted can someone please help!

  I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!

  Download of updates of work but the installation of updates arnt working
  installation of games arnt working cd - I get errors
  disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
  Scan disk does not work as it says system is already used but works if I put it to run at reboot
  MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.

  I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.

  I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It comes to the use of the partition Recovery of Acer to restore factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens or the recovery Partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• BASIC WINDOWS 10 DISPLAY ADAPTER; NVIDIA WENT :(

  NVIDIA WINDOWS 10 JULY 2016

  Windows 10 has an update for the video card or the driver game. Have tried to update to basic display adapter already. Looking for a software from Microsoft or another place that will cause the game and other performance of the computer to function properly. What Nvidia or other software can I use with it. HP doesn't have a software update for Windows 10 drivers that I could find.
  OPERATING SYSTEM & COMPUTER SPECS.

  HP Compaq Presario - CQ 5320F (model # ABL - AY030AA - CQ5320F) (purchase, April 2010)
  Windows 7 Home Premium (original with computer software) (Windows 10 Home Download free July 2016)
  Processor: AMD Athlon™ II X 2 240 2.80 GHZ (2 cores)
  Memory; (RAM) / 3 GB
  Grahpics: NVIDIA Geforce 6150SE nforce 430
  Games graphics: available total graphics memory 1407 MB
  Hard drive: 391 GB Free(455GB Total) February 2016: 64 bit 1 terabit Seagate hard drive replaced original westgate crushed 500
  GB HDD (reinstalled Windows Home Premium software in the new hard drive until Windows 10 Home free
  updated July 9, 2016
  Display adapter
  driver version: 8.17.11.9739
  DirectX version: 9 or more
  System type: 64-bit operating system, x 64 processor

  July 2016 after Windows download free 10
  Device Manager

  IEE ATA/ATAPI controllers
  Version of the NVIDIA 11.1.0.33 driver
  Driver date: 2009-08-04
  Digital signer: Microsoft Windows Hardware Compatibility Publisher

  The driver file details: C:\WINDOWS\system32\DRIVERS\nvstor64.sys
  All the other driver files say System 32

  Second list under IEE ATA/ATAPI Controller
  Loction: Bus PCI 0, device 8, function 1

  Display adapters

  Microsoft Basic graphics card
  General: Bus PCI 0, device 13, function 0
  Driver: Microsoft 2006-06-21 version 10.0.10586.0
  System 32

  Control Panel
  System & Security - Flash Player (32-bit)
  Programs - Java (32 bit)

  INCIDENT DETAILS

  Could not get auto detect NVIDIA after downloading the required java update.
  I tried recommended NVIDIA installation manual and it said that it was incompatible with the material.
  Tried the manual download from HP, no compatible version site.

  Games & APP dysfunction / Internet Explorer Edge

  Some applications closed and window down to the right indicating the display driver stopped responding...

  Some games worked in freeze frame.

  Edge Windows closed when you click to open the new folder that I created in the bookmarks bar. Can click on links to Web sites.

  Desktop is not my resolution and to fix the screen, I must have websites and small icons.
  
  Part of the Office is on the left off the screen.

  Panel - hardware & Sound - NVIDIA Control Panel: when you click on pop up States; The extension of panel display NVIDIA cannot be created. Possible reasons include: Version mismatch. Reinstall the drivers may solve this problem.

  Hello:

  See this thread and use the graphic driver nvidia posted (32 or 64 bit depending on the case).

  http://h30434.www3.HP.com/T5/desktop-video-display-and-touch/NVIDIA-GeForce-6150SE-nForce-430-chipset-not-compatible-with/m-p/5173180#M41749

• where can I get basic windows vista?

  When I bought my new laptop, I don't have the disks in the operating system with it. Now, I had to change my my portable hard drive requires these disks for windows vista Basic, until I can get it to the top and running, y at - it somewhere that I can get these or a download please? Thank you

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Error when you try to add a basic Windows Vista Home Edition user account password.

  I would like to add a password to secure my PC a little more by doing the following:
  AutoScan (Vista Orb) > Control Panel > user accounts > create a password for your account
  I enter a password to 10 characters. I tried more or less characters, a mixture of uppercase and lowercase letters and numbers etc, but everything I try I get the following message:

  "The password you entered does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements"

  I am running Vista Home Basic.

  I checked the Windows updates are all to date.

  I tried to create a new user account and create a password for the new account (both of my main user account and the new user account) and I get the same message.

  I also activated the 'Administrator' account (cmd > net user administrator / Active: Yes) and tried to use the administrator account to create a password and it does not work either!

  I ran Microsoft Security Essentials software, choose scan "Full". The software found no viruses or malware on my computer, but he did put in quarantine RealVNC (software remote access we use occasionally to work).

  I have created a screenshots of system information (to show which operating system I use), the dialogue 'create password for your account' (to show that I am logged on as administrator and to make sure that I do not have the process wrong--always possible!) and the error message "user account control panel.

  Computer info here

  I also took a screenshot of the thing that MSE found after analysis is complete on my system.

  Microsoft Security Essentials here Info

  Any ideas what to do here? I tried searching online and through this forum but have been unable to find someone who had the same problem, and even less it is solved!

  Thank you

  ChasSTW

  Just a point, I would like to make...
  There are some characters/symbols that are not allowed to be used as passwords.
  Hope that you have not used one of these.

  t-4-2

• Need for basic Windows Vista Home Edition recovery media

  I lost my windows vista home basic DVD. I have my key windows vista with me. can I get a duplicate dvd or can I use another dvd with my cd key?

  Read the info below re borrow a Vista DVD.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Basic - Windows error recovery

  My friend bought a Toshiba Satellite L305 S5931 at a Best Buy in California, which didn't come with the installation program, startup or recovery disks.

  Last week his system froze, he forced closed by holding the power button.  When it rebooted the laptop it light, but it happened for advanced, Boot Options because the system has been shut down improperly.

  Now, after you choose to start Windows normally, the system just went to a white soft blue screen, and nothing happened.  He tried Safe Mode, and it is same thing.  Infact, every available option gave the same results.

  I'm down to help out...  Rebooted the system, while holding down the number '0' key to get the Windows Recovery Option.  Unfortanetly this system doesn't have the restore files installed on the hard drive.  He asks the Windows Setup disc be inserted, in order to reach your computer repair.  However, as I have mentionted in the first paragraph of the laptop did not come with installation disk.

  Microsoft offers a Vista the weight client to download the system recovery software?  Help, please

  Thank you very much...  Guy Stegmaier * address email is removed from the privacy *.

  Windows Vista - Home Basic OEMAct - 00144-369-616-949

  You can create this disk from startup repair yourself:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media to say things back to factory settings .

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• change serial number key to Windows 7 Home Basic Windows 7 pro

  How to change serial number key to Windows 7 pro to Home Basic to Windows 7 without loss all files and personal data?

  You must clean reinstall Windows 7

  He was a popular workaround to versions of change , but has not been working lately, so it may have been prevented.  But you need to back up your files, because the files should always be supported against failure hard drive if you care for them at all, and especially during the repair or reinstall operations.  So if you do this, you might as well do the Reinstall much higher.

  Stick with the steps, tools and methods in the wiki of blue link and you will have a perfect installation that will stay that way as long as you do.

• WINS administration return privileges Basic (Windows 7)

  Hey all,.

  I recently came across a strange problem to have access to various programs and features on my PC; and hope that someone may be able to offer a solution. While I went through several forums discussing related topics... all possible solutions have become a dead-end.

  To paint a picture, here's the gist of what I experienced:

  Recently, I went on my computer and delete a backup that Norton antivirus 360 automatically (it saved under normal program files backup which was not helpful for me). It was not long to realize that this backup service used the majority of my automated C drive and was not necessary. It seems that in the process of removal of this backup folder, I managed to effectively reduce my access to the system to zero. I can access basic things (e.g. Chrome, word processing, etc.); but 99% of the features under admin settings all the way down to access my camera receives an access denied error message.

  I tried to manually edit privileges as mentioned on other blogs avancΘs and using edit (admin) to change things, but there is blocking me anyway.  I thought to use the registry editor - but I'm blocked from the use of the program as well.   Although the Admin, it seems no make the difference. I have the feeling that when I was messing around with deletion of files of Norton I can have screwed things up. I've basically tried to conserve space and in the process to remove a few accounts that I don't think I needed; and changed a few settings Admin - the things that I've done quickly without thinking.

  If there are those who think that they have a solution to my problem, I would be very grateful and open to suggestions at this point.

  Hey all,.

  I recently came across a strange problem to have access to various programs and features on my PC; and hope that someone may be able to offer a solution. While I went through several forums discussing related topics... all possible solutions have become a dead-end.

  To paint a picture, here's the gist of what I experienced:

  Recently, I went on my computer and delete a backup that Norton antivirus 360 automatically (it saved under normal program files backup which was not helpful for me). It was not long to realize that this backup service used the majority of my automated C drive and was not necessary. It seems that in the process of removal of this backup folder, I managed to effectively reduce my access to the system to zero. I can access basic things (e.g. Chrome, word processing, etc.); but 99% of the features under admin settings all the way down to access my camera receives an access denied error message.

  I tried to manually edit privileges as mentioned on other blogs avancΘs and using edit (admin) to change things, but there is blocking me anyway.  I thought to use the registry editor - but I'm blocked from the use of the program as well.   Although the Admin, it seems no make the difference. I have the feeling that when I was messing around with deletion of files of Norton I can have screwed things up I was essentially trying to preserve space and in the process to remove a few accounts that I don't think I needed; and changed a few settings Admin - the things that I've done quickly without thinking.

  If there are those who think that they have a solution to my problem, I would be very grateful and open to suggestions at this point.

  Hello

  We do not know what order you have done these things in.

  Try a system restore, if necessary in safe mode.

  As you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  See you soon.

• Unable to play Zoo Tycoon 2: "the color scheme for has been changed to basic windows.

  I know that this has been answered before, but the answers were not useful or difficult to follow. I have Windows 7 and that's all I know not on my laptop. I am the admin of it so I have access to administration options if I have to.

  OK, so this is the usual scenario you install - very well no problem - you click play and it comes up with this, black to hot flashes and then it does not load the game.

  Things I've tried:

  -Uninstalling and reinstalling

  -Restart the computer after installation

  -Make sure my computer is compatible with the game (typed in "system requirements lab and went to this website: http://www.systemrequirementslab.com/cyri/ ")

  -Clicking on it a lot of time by pure frustration

  -Try to follow the instructions. I did: start > personalization > display > change display settings > avancΘs > Troubleshoot > nothing. The button on that I'm supposed to click is gray.

  Can you help me? What should I do?

  Thank you

  You don't download a Compatibility Mode...

  Uninstall Zoo Tycoon 2...

  Then place the Zoo Tycoon DVD in the drive and if she tries to autorun, cancel it.

  Go to the icon of the DVD drive in 'Computer', do a right click and open/explore the DVD.

  Find the configuration file, right click and select Properties.

  Check the box "Run as Administrator" and then close the Properties window.

  Now, do a right click the installer again and select 'Troubleshoot compatibility.

  When the game is installed, you can locate the icon of the game, right click, go to properties and check the "run as Administrator box" as you did with the installation configuration file.

  XP mode would be worthless because the graphics driver in XP mode is not able to handle the load graphic

  The color scheme will change to BASIC when the game is executed because the game cannot handle Windows 7 Aero. It is normal for many old games...

• User's Guide Basic Windows not included with my brand new in a PC, where I get it?

  Where can I get the Windows 8 Basic guide that said it comes with the PC, but it does not?

  Thank you for the additional information.

  I don't know what kind of guide was supposed to be in the area, but this is a very complete guide I found on the Internet.  Also, here is a video guide to Microsoft to win 8.1.

  You will be able to upgrade to Win 8.1 for FREE once you have run Windows Update to ensure that the computer is fully updated.  You simply use the tile store Windows on the start page.

  As a user of long date to win 8 and 8.1, I believe that the two guides will help you to become very proficient in a short period of time.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Gw not compiled basic Windows 7 XP mode

  I want to run GW Basic programs that are not updated. They run perfectly in Windows XP.  I am now 64-bit Windows 7 Home Premium.

  Iahave ordered the software to upgrade my Windows 7 Premium to Ultimate.  If I then add XP Mode, I can run these programs?

  If they run in XP, they run in XP Mode.
   
  Never heard of a compiled program from GWBasic.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I want to run GW Basic programs that are not updated. They run perfectly in Windows XP.  I am now 64-bit Windows 7 Home Premium.

  Iahave ordered the software to upgrade my Windows 7 Premium to Ultimate.  If I then add XP Mode, I can run these programs?

• QUESTION ABOUT THE KEY TO BASIC WINDOWS 7 HOE...

  I BOUGHT A LAPTOP ACER WITH THE DOS VERSION AND A BASIC HOME REAL WIN SEALED DVD WINDOWS 7 GAVE TO ME... HOW CAN I PROTECT MY KEY TO GET DIVERTED AS IT CAN BE USED BY ANYONE BECAUSE THE KEY STICKER IS STUCK TO THE LAPTOP. IN THE PAST, I READ ON THE CASE THAT REAPAIR LAPTOP DISAPPEARED AND LATER WINDOWS CRASH AFTER A FEW DAYS... BCZ KEY HAS BEEN COPIED... PLEASE GIVE ME THE LINK TO THE MICROSOFT WEB SITE IF THEY EXIST WHERE THERE, I CAN PROVIDE THE INFORMATION OR CAN CREATE ACCOUNT, THAT THIS KEY BELONGS TO MY NAME AND OTHER INFORMATION... AM I ELIGIBLE FOR UPGRADE OF WINDOWS 8 OFFER IT IS HAPPENING IN INR.699 /-IF YES THEN A HOW MY WINDOWS GET CORRUPTED AND AFTER RESUMPTION OF THE RACE... WINDOWS 8 WILL B THERE?

  There is no possibility of someone steal the key product of your pre-installed Windows version.

  To make it easier for respondents to read your posts I recommend you use upper/lower case. Write messages all uppercase is often referred to as SHOUTING.

• I lost my Home Basic windows vista and windows 7 update disk, I have the original key, how can I found the file to download my o.s. in Italian language. Thank you.

  I lost 2 original disk windows, other windows Vista Home Basic Upgrade to windows 7 Home premium SP 1. I want to download my o.s. once my language is Italian, were I can find the link to download. Thank you m..

  Try to download again, maybe a corrupted download.

• Upgrade to Windows 7 family basic Windows 7 Ultimate will remove my files?

  upgrade windows 7 Home Basic to windows 7 Ultimate edition will delete my files?

  If you are using Anytime Upgrade, it should not.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.