Error when you try to add a basic Windows Vista Home Edition user account password.

Similar Questions

• Windows Install Cleanup Tool error when you try to install it on Windows Vista Business

  After a failed installation of Adobe CS 4 on my Windows Vista Business 32-bit system, I am now unable to update or uninstall anything Adobe on my PC. I had read several forums, Adobe specifically, when users suggested to install and use the Windows Installer Clean up tool.  I have successfully used this app in the past with Windows XP, but when I try to install on my Vista box cleaning tool I am immediately presented with the error:

  Windows Script Host: There is no script engine for file extension ".vbs".

  Does anyone know a solution for this?  I tried hunting one down a few months ago, but could not find something that solved this problem.  Or are the users of Vista GROUND just when it comes to this cleanup tool? I want desperately to remove/repair my Adobe products (which work, but cannot be updated) without the need to make a nuclear weapon and to open and lose time reloading of each piece of software, to restore the profiles of boards, etc...

  Hello NMITGuy,

  You can view the following information about the error: there is no script engine for file extension ".vbs".
  http://www.Winhelponline.com/blog/error-there-is-no-script-engine-for-file-extension-when-running-vbs-files/

  Please let us know if that helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error when you try to publish movies with Windows Movie Maker: another user is running Windows Movie Maker on this computer. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again.

  Movie Maker will not film because of "another user is running Movie Maker on this computor... publish »

  I'm trying to publish a movie on this computor in Windows Movie Maker. The files are .wmv with a band his .wav and are all stored on my computor. I performed this task with success several times and there is enough free space on the computor.

  When I click on publish, there are a few seconds where he tries to publish, but then the program goes into a gel and the dialog box appears with the following: "another user is running Windows Movie Maker on this computor. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again".

  When I click Close, there is an icon of wmv on my desk with the title of my project, but it is empty. I am the only user on this computor and I am puzzled as to why this should be implemented. I tried to turn the filters but nothing helped. One thing that I tried was to publish the band sound and the titles and credits without video files and I found it worked.

  Any ideas?

  Thank you Volenteer J. How would you like to know if a .wmv file is corrupt? Is there something I can do to click the .wmv files that tell me if they are corrupt? I need to identify the files that are causing my problem.

  ==================================================
  Sorry... but it seems that I have more questions than answers.

  You said initially that you could publish the soundtrack and titles with success...
  I was wondering if you tried to add a .wmv file to see if you could publish?

  What was the source of the. WMV files? They are all from the same source?

  They were converted from another format? If_Yes_ maybe another
  Converter would be worth a try.

  You change them widely? (split, rotation, transitions...)

  There is a possibility that you could import the Windows Media .wmv files
  Encoder and convert them to... .WMV to .wmv. Seems pointless, I know...
  but it would create a new .version of the. WMV files and can fix that
  perhaps never the problem.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Media Encoder 9 Series
  http://download.CNET.com/Windows-Media-Encoder/3000-2212_4-14887.html

  Using Windows Media Encoder 9 to convert a video file to .wmv
  http://help.UNC.edu/3940

  Re-index WMV files
  http://www.jhepple.com/support/reindexwmv.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more

• any copy forbidden error when you try to watch HBO in windows media center.

  I get all copying prohibited error when you try to watch HBO in windows media center. It seems that my PlayReady is corrupt. Whenever I try to update game ready to go in Media Center, it fails. I tried uninstalling and reinstalling PlayReady. Said again he must udpate, and always fails. Can someone at Microsoft PLEASE Playready works. It drives me crazy,

  These steps 1

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

  Still did not work.

  Then did it

  (5) download http://go.microsoft.com/fwlink?LinkId=105000 ResetDRM.exe

  (6) using winrar or winzip to extract files to ResetDRM.exe (ADVPACK. DLL CleanDRM.exe resetdrm.inf) to a temporary folder. ResetDRM does not work by itself on Windows 8 in any compatibility mode so you MUST check out it

  (7) use the Explorer to find cmd.exe to C:\Windows\System32

  (8) right click on cmd.exe and "run as Administrator".

  (9) cd to the temporary folder where you extracted ResetDRM.exe

  (10) run "CleanDRM.exe - v". A text window opens after a few seconds and check that several files have been deleted. If there is an error that a resource could not be opened for exclusive access, you may need to reboot and try again after making sure that Media Center does not start automatically

  Reset. Now works. Wow what a PITA.

  I think that it was all caused by have to swap disks.

  PlayReady my % $# ^ & $% ^ $@ #.

  I would mark this as an answer, but I don't see a button for that now, (fact)

• Error when you try to add a song to Windows Movie Maker: the selected file is not valid or is corrupted.

  Sometimes, when I add a song to Windows Movie Maker it does not work.

  When I try to add one of my songs, it is said: C:\Documents and Settings\Utilisateur\Mes documents\Ma Musique\iTunes\iTunes Media\Music\Craig Smart\I Miss You - Craig Smart.mp3 could not be imported. The selected file is not valid or is corrupted.

  Help, please

  When I try to add one of my songs, it is said: C:\Documents and Settings\Utilisateur\Mes documents\Ma Musique\iTunes\iTunes Media\Music\Craig Smart\I Miss You - Craig Smart.mp3 could not be imported. The selected file is not valid or is corrupted.

  Help, please

  2 responses on itunes and Windows Media Player (WMP) are:

  1.

  RE: iTunes and WMP - MusicBridge
  
  Found this on the web. I can't vouch for it. Use it at your own risk.

  Excerpt:
  iTunes is not compatible with Windows Media Player. iTunes is - like Apple-very protective of any product and does not like to share. So, you have to force off iTunes and WMP.

  To do this, you can use this sloppy program: MusicBridge.
  The description of its creator:
  MusicBridge allows people who use both iTunes and WMP on the same machine to keep their libraries in sync. MusicBridge offers a variety of synchronization options so that you can manage your collection of music in the media player, or both. MusicBridge duplicates of meta-data between Windows Media Player and iTunes, it does not copy the physical files between applications.

  Version 2.0.1 is a bug fixing release.

  Best thing: it's free.
  http://download.CNET.com/MusicBridge/3000-2141_4-10530687.HTML?tag=mncol;psum

  2.

  courtesy of musiclover101:
  

   http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff

  convert the songs in your iTunes library to a format that Windows Media Player can understand

  You can convert the songs in your iTunes library to a format of Windows Media Player can understand - (I tend to use mp3). This can be done inside of iTunes itself. If the songs in your iTunes library were purchased in the iStore and were purchased in the plus version (indicated by a small sign above the price of a song +), then they are DRM free, so they can be converted easily. However, if the songs were not purchased in the format more, you can convert them for 30 cents each. I highly recommend that you do as the plus version of songs are premium quality - and since they are DRM free, you can use them in almost all applications and you can burn them to CD and play almost anywhere. All the songs on the iTunes store are now version more, so you don't have to worry about searching for them in the future.
  To convert songs to Windows Media Player can understand, open iTunes, and then do the following:
  1. click Edit, preferences, and go to the general tab
  2. click on the button "import settings".
  3. change the "import using" at "MP3 encoder".
  4. click OK and go back to your music library
  5. choose the list view and select the first piece of your library
  6. scroll all the way to the last song in your library
  7. press the button SHIFT key, then click the last song to select all the songs in your library
  8. click on "Advanced" and then "Create MP3 Version."
  9. your songs should start to convert and according to how many songs do you have in your library, this could take some time
  10. open Windows Media Player and press F3 or click file, add it to the library
  
  11. click on OK - Windows Media Player should start to search for songs on your computer and after that he finished the search, you should find the songs in your library in your Windows Media Player to iTunes library.

  NOTE: This method will not work unless you have purchased iTunes songs or if you have converted the songs iTunes more for each 30 c

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The name already exists error when you try to add the host to the cluster

  I created a cluster that currently has no inside host. When I try to add a host I get an error that says: "the name"ip address of the host, I add"already exists. I don't understand why I get this error if there is no showing on the cluster host. See below for the screenshot.

  Your screen shot shows hosts is already part of the inventory - if the host is already part of the theinventory have not need to add it again - simply drag and drop it into the cluster

• 800b0100 error code when you try to install updates on Windows Vista

  Error 800b0100 code happens while trying to make updates.  I recently went back to the default factory settings and I try to do all the updates.  I used the updater and fix it also.  I restarted the computer and still no joy when you try to load the update for windows vista.

  Hello

  · Do you get this error when the individual any update installation (such as Service pack updates security etc.)?

  Method 1: Turn off the firewall and antivirus software of third parties.

  Step 1: Disable the firewall

  (a), click on Start and type Windows Firewall.

  (b) click on Windows Firewall.

  (c) click on firewall Windows turns on or OFF.

  (d) turn the Windows Firewall until we have install Windows updates successfully. If the problem persists then please continue with the next steps.

  (e) once we install the updates, please turn on the firewall.

  Step 2: Disable the anti-virus application installed on your computer. Disable the antivirus firewall.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps under step 7

  Also see: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800B0100

• When you try to access some programs, Windows Vista will stop and then restart

  There are some windows programs that I can't access because my computer says that windows has stopped working then he says looking for a solution and then he says: restart windows. I can't access my programs and features to remove some programs I think may be worth. I can't access MY computer optison either.

  Hi billdee,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you try to uninstall the program?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

   

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

  Method 4: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• Need for basic Windows Vista Home Edition recovery media

  I lost my windows vista home basic DVD. I have my key windows vista with me. can I get a duplicate dvd or can I use another dvd with my cd key?

  Read the info below re borrow a Vista DVD.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Error when you try to add a third array of nursery group

  Hello everyone.

  I have a Setup with a PS4110 and a PS4210.  I'm trying to add a second PS4110, and I get this error: * the maximum number of platforms of this type has already been reached.  Please try again.

  IM assuming that it dosent like the second PS4110, but who dosent seems correct.

  Anyone else seen this?

  Thanks in advance!

  Shawn

  Hello

  When you look in the notes of the PS firmware on the eqlsite unter "Limits of Configuration", you will see that a group of PS4XXX can only contain two members.

  Tim

• Error when you try to add my HP photosmart C4600 to my Mac book pro

  I tried to print the test page, and he did. But I had the problem when I'm tring to print a document or a page Web etc. He asked me to add the printer and it saids

  "An error occurred while trying to add the selected printer.

  Successful-OK-ignored-or-substituted-Attributes ".

  He used to work smoothly on my PC, but now it happens right on my new Macbook Pro. My Mac is OS X 10.7.3, and I tried to reinstall the HP printing software that was provided as a disc when I brought my printer and it still does not work.

  Download and install this: support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Download 80080005 error message when you try to install updates in Windows Vista.

  Original title: error 80080005

  Hello

  I'm still not able to run windows update. Automatic repair of Microsoft did not work, nor has repaired all in one Windows. I get error 80080005. Someone at - it ideas please. I am running Windows vista SP2.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  Try these methods and check:

  Method 1: First of all, make sure that no proxy server is causing this issue.
  a. click on the round to start, in the search field type cmd
  b. right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

  c. has the prompt, enter the following command exactly as written including spaces and press enter

  netsh winhttp see power of Attorney

  If this message appears, type exit, and then press ENTER.

  Method 2:

  Check if the bits service is started.

  a. click Start, type services.msc

  b. Locate the Bits (Background Intelligent Transfer Service) service.

  c. double-click on it and check if the service is started and the startup type is set on automatic.

  Method 3:

  I suggest you follow the steps mentioned in the link one at a time and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the steps do not help, then follow the steps in the next method and check.

  Method 4:

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Method 5:

  I suggest you follow the steps:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  After you follow the steps of troubleshooting provided, if you get the error message please response so that we can help you further.

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Error when you try to play a DVD: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  copy a group of photos w/music (Smilebox program) on dvd;

  After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  We live in the Washington area. I didn't know that DC was considered an unusual geographic region?

  Hey nongeekbetty,

  The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.

  Step 1:

  Make sure that the DVD region is set to the appropriate region:

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. right-click on the DVD drive.

  d. right-click on it and select Properties.

  e. make sure that the region will be resolved.

  For your information:

  http://Windows.Microsoft.com/en-us/Windows7/playing-DVDs-in-Windows-Media-Center-frequently-asked-questions

  Step 2:

  Also temporarily disable User Account Control (UAC) and check it out.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Activate it once you are done with the check.

  Kind regards

  Savan - Microsoft technical support.