Similar Questions

• Error handling and the basic flow data

  Hello

  I'm learning the basic error data and flow management. The seal is a simple VI to implement this.

  How do I implement this code to display an error.

  Thank you.

  You must assign a value of your choice for the cluster of error - in errors generated by the LabVIEW functions, error is already assigned/etc, but to find user customized errors, the user must assign values.  Just make sure you do not use the same error values that LabVIEW uses for predefined errors. If you do a search for error codes, you will be able to find this error varies from code - so pick something that is not already used.

  And Yes - using an error handler would be a simple way to accomplish what you're trying to do. This error handler will appear a message error only if your feature will remain smooth.

  -DP

  BatchTest Corp.

  NEITHER Alliance Partner

• Convert disk dynamic disk Basic without data loss on Windows 8?

  I have a laptop with a 500 GB hard drive. I have windows 8 is installed. How can I convert this disk to dynamic disk to basic disk? Is this some Partttion managers as EaseUs allow convert dynamic disk to basic disk to the disk on which the operating system is installed?

  Hi harsh,

  The disk must not have any volumes nor contain no data until you can change to a basic disk. If you want to keep your data, back it up or move it to another volume, before converting the disk a basic disk.

  Note: If you convert Dynamic Drive reader Basic with Windows installed Windows does not start.

  For more information, see change back to a basic disk dynamic disk. (Valid also for Windows 8)

  You can also post your query to Microsoft TechNet Forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Store of data increase Button - how does it work?

  Hello.

  What does the data store button? It create software RAID0 or 1, or maybe it's not a RAID?

  And what will be if one of the HARD drive failed - all the data store are broken?

  Thank you.

  First of all, a VMFS data store is a file system as NTFS, FAT, HPFS,..., nothing physical. Is that the function of the increase is to extend the file system after you have added the additional disk space to your RAID set physical or logical unit number in the case of a storage system. There are two ways to increase the file system. The first is to simply increase the file system where you have increased the underlying volume (comparable to the "diskpart extend" in Windows). The second is to extend the data store by adding a number of additional logic unit to a data store that is sort of a RAID0. However it is up to you to provide the level of security you need on the side Physics (storage). In case you use extensions for a data store and one of the defective extents more, you can not access this part. If this is the first part of the measure, you will lose access to all levels.

  André

• How can I get basic EXIF data integrated with photos that I download on Flickr using Lightroom for mobile?

  When I upload pictures to Flickr using mobile LR it does not include EXIF data (i.e. ISO, shutter speed, Aperture, etc.). Is there a way to do this turn on?

  You can enable this in the Mobile Lr frame-> share with metadata. Hope that answers your question. -Guido

• basic validation date

  I want to validate the input of a date field.

  But can't we feature standard construction.

  My client wants an error message custom when the input is not a valid date.

  But I don't know how to do this.

  Can someone help me?

  The basis is to try to convert the string to a Date object. If it fails, the user has entered a wrong value.

  This may look like this:

  Event.RC = true;

  If {(event.value)

  If (util.scand ("mm/dd/yyyy", event.value) == null) {}

  App.Alert ("you have entered an incorrect date string.");

  Event.RC = false;

  }

  }

  Of course, you can adjust the format string and the error message as you please...

• Basic mx data acquisition and real-time application

  Hello

  I am generating an output through OR pxi 6733 using the basis of programming in labview 8.6 mx DAQ.

  The problem is when I create a digital output channel indicating an error and say not supported for this target.

  I'm not able to use the base that I have all of the same software version installed in the HOST and TARGET of mx daq.

  I use in time real 8.6 and daq mx 8.9.5.

  Thanks in advance.

  You use DAQmx or DAQmx Base?

  I guess his DAQmx because DAQmx Base does not run on the objectives of the RT.

  Can you provide us with an error code?

  Christian

• What is impact of oracle om if basic data go to SE1

  Hi all

  I would like to know what would be the impact on oracle basic if data go to SE1,.

  for now, we use self and want to go SE 1

  Here are the details of the db:

  Banner                                                                                Con_id

  12 c Oracle database Release 12.1.0.1.0 - 64 bit Production 0

  PL/SQL Release 12.1.0.1.0 - Production 0

  "CORE Production 12.1.0.1.0" 0

  AMT for Linux: Version 12.1.0.1.0 - Production 0

  NLSRTL Version 12.1.0.1.0 - Production 0

  Thank you

  There is no difference in the code of the Oracle.  The difference is that in terms of licenses. SE1 can be run on a server (2 connectors) very low.

  Hemant K Collette

• use of iPhone data against IS 5 + 6?

  It's time to buy a new phone and I worry about my data usage will increase with a 6, 6 s or SE. I read that it will increase with a 6. I can't find anyone talking about use of data of the SE. Does anyone have any info on this? I currently have a 5, uses ATT and version 9.3.4

  There is no reason to use cellular data increase is based on the model of the iPhone, that you intend to get. The operating system is the same, the services available are the same, and the applications are the same.

• What is this file, the "old data Firefox?

  After the most recent update (dudes, what happened to the usual explanation of which resulted in the update?) I noticed this file on my desk, "Old data for Firefox." Is where all my Add-ons went? My presets? And so on?

  Is there a reason to keep this file, and if so what could I be able to use him?

  Thank you very much
  BAB

  You recently updated Firefox? Which will cause the folder "Old Firefox data" appears on the desktop. The "old firefox data" is basically old data of Firefox, as its name suggests. You don't need, but you can use as a return to the top if you wish, although it is highly unlikely that you need or like it. Check out this thread for more details. This issue is not related to the update of firefox.

  Have a great day!

  Jon

  I don't remember if this issue has much to do on what it can be used for, but basically, it can be used as a back up. The thread I posted instructions on how to view your current profile data.

• remove data from the channel

  I have several channels I want to remove a set number of data points since the start of the round, basically some data that are saved during an initialization phase, which I don't want not included in the data.  Is there an easy way to do this?

  Hello Jordan,.

  There is a command that allows you to clear the values of several channels called DataBlDel

  Command: DataBlDel

  
  

  Removes a data block in the channels.

  Call DataBlDel (ChnNoStr, ChnRow, ValNo, [ValDelOnly])

  
  

  Input parameters

  
  
  
  
  
  

  ChnNoStr

  Specifies one or more channels.

• Help! Trying to write an array to a file without having to rewrite the old data each time.

  Hey everybody,

  I have a vi that takes a 2D array and writes to an xml file. The purpose for this is to characterize the pathloss through a matrix dowkey 10 x 10 to different frequencies. I use this program to create a table of correspondence for the switching matrix, so when I make one of my tests I can get an accurate measurment. The problem with this is that I take data points about 299 by combination of matrix switches leading me to data more than 32000 points in the lookup table. I use xml because each data point requires a header so I can analyze via the table of correspondence with another of my vi when I need that pathloss. What I'm trying to fix, is that when my vi wrote in a file at a time to save memory space, he wrote a single Bay. When writing, it rewrites the old data, and then the new data. As the number of points of data increase so does the time of latency of writing in the file. At the time wherever I am finished, it takes about five hours to completely write to the file. Does anyone know how to write about writing to a file without having to rewrite all the old data? Attached, it's my vi to write to the file, my vi for research in the file and an example of one of my tables in research.

  Thank you

  Dustin

  Hello

  Just in case others have a problem, something along these lines as one excerpt:

  

• Reading data SCXI-1600

  Hi Experts,

  I'm new to this interface SCXI. Kindly help me in the framework

  I'm developing an application that will be using the SCXI-1125 and SCXI-1600 controller module. In the application, I want to allow the user to configure the different tasks in the front panel.

  What are the necessary controls in the front panel to allow the user to configure the task

  How to read the data of the SCXI-1600,

  How to differentiate the eight channel data from 1125 SCXI thro SCXI-1600

  Thanks in advance

  True, you can't simulate the SCXI-1600. This means that you will not be able to run your code without the hardware. For simulation purposes, you can, however, use another device that would work in the same way for the SCXI-1600 in terms of triggering, resolution and the frequency of sampling.

  In regard to programming, would use it DAQmx as I'd mentioned. There is no specific examples for the SCXI-1600, but you really do not need them. The SCXI-1600 is basically a data acquisition module, which is located in a SCXI format with a USB connection. Your software is concerned, you will use DAQmx to read data from it. Then, take a look at DAQmx examples as data on data acquisition devices.

  Your task will define how many channels you will read. Since you are reading a mixture of measures (temperature, pressure and tension may be simple), you will need to decide whether to create separate tasks for each of these measures that are configured to be specific to this type of measure, or to create a task that reads simply all channels not adjusted values (i.e. raw tensions) and then put you in the scale of values in your code. If you open the example Finder and navigate through the input and output hardware tree-> DAQmx-> Analog measures you will see different categories for types of measure. Many of them have graphics.

  If you have not already done so, you can start here: http://zone.ni.com/devzone/cda/tut/p/id/3116

• Date / reminder

  Hello:

  I have a laptop HP under 32-bit Windows Home Premium.

  Windows (or any other program that you can be aware of) has a "demand".

  If the user can set a reminder when he or she needs to do something, for example,

  Remember to do a specific chore, send someone, take the car to the shop...?

  Basically, a date/calendar with pop-up, or another type, reminder. When you

  Start the computer.

  Thank you

  DaleB

  Uh, uh, uh, let me think, uh, Windows Calandar. Start - all programs - Windows Calandar.

• idac6 of the incorrect data returned by winrm commands

  Issue commands to idrac winrm returns incorrect data or no data. There are a lot of servers that do not work, but about 5 x the amount which work very well on the same FW revisions. The question is about R610 and R410.

  Pretty standard FW level:
  IDRAC = 1.90
  LCC = 1.5.5.27

  The following command returns incorrect data that are constant in all those who are broken. To start the model isn't T710 and the ChassisServiceTag does not match the ServiceTag as it does normally if the system is not a blade. All incorrect data displays the model under T710 and the ChassisServiceTag as JDTR5L1. They also all what they have only one dimm installed. BIOS version is incorrect, but also seems to be incorrect on which ones work.

  NOTE: Replace with the IP or name of the idrac. Change password if it is not the default value of calvin.

  WinRM g http://schemas.dell.com/wbem/wscim/1/cim-schema/2/DCIM_SystemView?__cimnamespace=root/dcim+InstanceID=System.Embedded.1 - u: root - p: calvin - r: https: / //wsman - SkipCNcheck - SkipCAcheck-encoding: utf - 8 - has: basic

  Data:

  AssetTag
  BIOSReleaseDate = 03/05/2010
  BIOSVersionString = 2.1.3
  BaseBoardChassisSlot = NA
  BladeGeometry = 4
  ChassisName = the main system chassis
  ChassisServiceTag = JDTR5L1
  ChassisSystemHeight = 5
  ExpressServiceCode = DELETED
  FQDD = System.Embedded.1
  Host name = DELETED
  InstanceID = System.Embedded.1
  LastSystemInventoryTime = unknown
  LastUpdateTime = 20100310170819.000000 + 000
  LifecycleControllerVersion = 1.5.5
  Manufacturer is Dell Inc.
  MaxCPUSockets = 2
  MaxDIMMSlots = 18
  MaxPCIeSlots = 1
  MemoryOperationMode = OptimizerMode
  Model = PowerEdge T710
  PlatformGUID = 314e4d4f-c0b4-3280-4610-00324c4c4544
  PopulatedCPUSockets = 0
  PopulatedDIMMSlots = 1
  PopulatedPCIeSlots = 0
  PowerState = 2
  PrimaryStatus = 1
  ServiceTag = DELETED
  SysMemErrorMethodology = 6
  SysMemFailOverState = NotInUse
  SysMemLocation = 3
  SysMemPrimaryStatus = 0
  SysMemTotalSize = 512
  SystemID = 652
  SystemRevision = 1

  I tried "racadm racreset hard" without success. Next step is to be able to drain. After that it's default settings. After it's LC repair which seems to solve many questions randomly.

  I opened a case of dell already but would like to know if anyone ever seen this problem?

  Thanks for any help.

  This allows to CSIOR fixed the problem.

  Does anyone know a simple way to update the setting on 11 gen/idrac6 without doing it manually during a restart?

  I looked at using the following and do not see anything:
  omconfig
  racadm
  syscfg

  I think that this can be done through management to idrac, but the process seems mean.