Battery is not properly recognized on Satellite L500

Similar Questions

• New CD/DVD drive is not properly recognized on Satellite A30

  Hi all

  I just bought a new CD-RW/dvd-r for my Satellite A30 disk drive, and it does not recognize the new drive. It is certainly compatible (the player itself is the SD-R2412), but when I go to 'my computer' there is no cd drive it at all.

  I have the feeling that it could be something to do with the code of the device in Device Manager, but I don't know how to change, what is the new number, or even what to do.

  Can someone help me? -Is it something to do with the Device Manager, drivers or something else?

  Thank you, Jon

  Edit: I noticed there are a few other people with the same problem - but it is a different cause. For most people than what happens when the software is installed, and when they enter the Device Manager there is a yellow exclamation point.

  However - this is not the case for me. This is a new piece of hardware, and there is no yellow triangle in my device manager. I think it's the wrong device i.d. as I changed the drive itself - but do not know how to go for the implementation, so that the computer makes this new record

  Hello
  The spectacle of th dose BIOS drive?

  Paul

• After update BIOS USB Ports not recognized on Satellite L500

  Hello!

  After a BIOS update to 2.1, two of my three USB Ports no longer work. Is it possible to downgrade to the previous BIOS? Or what else could cause this problem?

  The system is a Satellite L500 - 153 (PSJ3E)

  Post edited by: koocho

  Go to Device Manager.
  Remove all USB hubs and USB controllers in the list of devices.
  Restart the computer and wait for Win has recognized and installed again all USB devices.
  Then test the USB feature.

• AC adapter does not work if the battery is not removed on my Satellite?

  A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops).

  Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything (if the battery is always in its place). The power adapter, cable spines,... seems in good conditions and I don't think they have problems because when I remove the battery and restart the laptop, the Satellite finally understands that he must use the power supply and not the battery. Then I can put the battery back in its place and load it... But if I unplug the AC adapter, the circus re - start.

  Is power off somewhere? Is there a place where you can choose: "always use the battery and not the power?

  I don't think so, it's a motherboard problem?

  Hello

  It is not easy to say why it happens. For me, this looks like an electronic malfunction of power supply.
  But it's only my suggestion to be 100% sure that some diagnostic tests are necessary.
  But the battery is ok and AC adapter works as well as you suggested.
  What you can do is to check your BIOS version and compare it with the BIOS that is available on the page. Is there a newer version, so you can try to update.
  Note: Be careful! Bad BIOS and update wrong procedure can damage the laptop.

  But if you use the latest BIOS, so I think it must be a hardware malfunction. In this case, the only way to find the bug is to ask the AEP from Toshiba in your country for help.

• Screen does not work on my Satellite L500

  My Satellite L500 screen does not work. I can connect the laptop to a monitor and use ok but the screen of the laptop remains blank.

  I did something to cause this?

  I don t think so.
  If you cannot switch back to the display of s for laptop using FN + F5 I m afraid there is a hardware problem.

  The problem with the display cable or show itself. Is the laptop must be disassembled and all this needs to be checked.
  You can contact Toshiba service nearest and ask for help.

• Battery does not charge, but by Satellite Pro L510 is running in battery mode

  Hi, I had a few odd battery problems these days:

  I had charged my laptop completely to 100% and then used it on the train on my way home (in Windows 7 64-bit), how I got it to about 70%, shut down normally, put it in my bag and left there until I got home. When I got home, I tried to turn it on but it lights and battery light orange blinking indicating that there can be no charge. I plugged it in and it worked as usual (Linux), so don't think too hard on this subject.

  Later I realized that the battery was still the load after longer that it should have been and running the acpi + (linux) command told me has the battery + charge, 0%, charge at the zero rate - will never fully charge. + I disconnected to see if it worked, and the battery lasted as usual, although always it's 0% charge rate.

  I started in Windows 7, and the battery reported that it was at 68%, so I assumed it was back to normal. A while later, I noticed that he was still 68%, despite having connected for a while - at least an hour. Start on linux, acpi showed data battery normal search, except that it was 'blocked' to 68%.

  I disconnected the laptop and run it as usual, and it ran until he cut; I guess with him out of power. I plugged it back in and it is 'charge' again, even if it is still 0% battery and "load at the zero rate".

  Before all this happened, the battery works well - apparently to 94% of its capacity. It would be modified for a few hours unplugged play movies or games.

  Summary: PC laptop battery suddenly going to works "attributed to the zero rate" and 0% complete; battery still seems to work very well, seems fresh and portable no power plugged in but the battery is not 'charging' or have his percentage of charge remaining increase.

  Someone at - it ideas? I have yet to try a BIOS update, but it seems that there is one available, so I will give that a try. I feel that the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.

  Thank you!

  Hello

  I think you should try upgrading the BIOS
  BIOS default value, and then try to charge the battery again.

  > get the impression, the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.
  Well, it of really difficult to tell if the battery or the mobo may be affected
  In my opinion, the battery must be tested without a doubt

• DVD is not recognized on Satellite L500-1XJ

  Hi all

  The DVD is not recognized when a dvd was released in the laptop.
  I tried to reinstall the driver but no luck.
  Does anyone have an idea?

  Thank you

  Gunter

  It is not easy to say what the problem is here.
  We don t even know what DVDs you are using.

  Maybe you should write a little more of everything cela and offer some fact and relevant information. You know, for a better understanding.

  Also which driver you have installed again?

• Satellite L550 - not properly recognized graphics card

  Greetings,

  I have problems with my L550 display drivers {PSLWSA - 01000 Q}. I removed the pre-installed copy of Windows 7 (Professional) comes with the laptop and installed a copy of Windows 7 (ultimate). The pre-installation read my like a 5165 graphics card, but my new copy of windows it read just like a 4650.

  I tried to reinstall multipul windows of time without success. The drivers of the Toshibas site install as a 4650, and the drivers of the habit of the Atis site install at all. Note that nether package installs the CCC, I had to go through drivers 9.9 beta just to get the CCC installed. Toshiba and Harvy Normans (where I got this from) suffice to say that this computer has a 5165 inside.

  Any help would be greatly appreciated.
  Thank you

  Hi C1,.

  Why you deleted the preinstalled version of Windows 7 if everything worked correctly it? I put t understand this because the pre-installed version is pre-tested with all drivers and tools. This means that everything works and you can use all functions

  Generally, your model is listed on the Australian page where you download the driver:
  http://www.MyToshiba.com.au > Support

  But to be honest, I'd install the version preinstalled Windows from Toshiba

• Size of RAM not properly recognized in Ubuntu 8.10

  Hi all

  I need help with my laptop. I upgraded my Toshiba Satellite P100 with memory and now it has 4 GB. He acknowledged, however, after installing Ubuntu 8.10 64-bit only 3 GB of RAM. Anyone know what could be the problem?

  Thank you in advance.

  With respect,
  Juraj

  Hello Juraj

  RAM is recognized correctly in the BIOS settings?

• WLan / WiFi works does not properly on the Satellite C55C-C-16f

  Hello

  I just bought the laptop toshiba Toshiba Satellite C55C-C-16f mentioned in the title, and there seems to be something wrong with the WiFi adapter.

  Sometimes it connects to the WiFi, but most often, when I start the computer (whether by or stand when it is off), it finds no network and cannot connect to my WiFi router. Usually, when I restart the computer all of a sudden does ot connects to the network. I tried the filming of standard Windows problems, but it can not find problems or repair.

  I hope you can help!

  Best regards

  I just have the same problem with my new ray. If I have more than 2 m from the router, the reception is 1 bar. Most often the laptop can't find any network.
  I tried to put maximum performance in energy saving mode, but it doesn't change anything...

• Game Drakensang will not properly play on Satellite L850D

  Hello

  I trying to load an old game, "Drakensang' on my new L850D satellite, but a few problems.

  The loading of the game perfectly well - or so it seems - but when he plays, he seems to play in the background. The Toshiba screen 'Leading Innovation' is always on the game.

  Could someone tell me how I can get rid of the Toshiba screen, please?

  Thank you very much. I'd appreciate any help.

  Hello

  To be honest, your message is very confusing
  I guess the screen Toshiba Leading Innovation is the desktop wallpaper.
  Right?
  This game n t I known so I googled a bit.
  Looks like it's an online game that runs in the browser.

  I would recommend so test this game using different browsers. In addition, it would be possible that a patch or an addon is blocked and so the game does not run.
  At least you should also try to update the graphics driver.

• Re: Recovey menu does not appear on my Satellite L500-19 X

  Hello

  I can't start my toshiba laptop L500 - 19 X.

  When I start to appear two menu option. 1. start normally or 2. Recovery mode. These two options cannot run windows 7. I only get black window without seeing all the windows.

  I try to press F8 to access the detailed recovery menu. I selects the computer repair option, wait for the Toshiba Recovery Menu of Options but it is not. The only thing appears on the screen is the pointer of the mouse in the minor mode of resolution, but I do not see the menu, and cela stills forever.

  What can I do?

  Thank you.

  Hallo

  HARD drive recovery option follow works as described in the document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
  Please, be nice and explain what steps are available on your computer so that we can understand what happens exactly when start you the repair my computer option.

• Drive DVD - RW does not properly on the Satellite A40-702

  It's on my lap top of Toshiba Satellite SA-40-702. Five years ago.
  Hi, I have looked at the wires for this problem and have not been able to identify a similar thread yet.

  My dvd - rw play a purchased audio music cd and it will also work with disks that came with the laptop. S something works well... However, recently I tried to burn a piece of music (from i-tunes) and he showed in white, but strangeley the cd did play the piece of music OK in a machine at work. I tried now to show some other discs that I recorded on this laptop in January, and they now show that the discs and I cannot see their content (they were photos and text documents). They worked before.

  I have this weekend made many attempts of 30 photos of burn, and I tried two different brands of dvd discs blank, but even if the laptop says 'burning to disc' etc when I try to view the burned disc, there is nothing on it!

  I wonder if anyone has any suggestions please. I tried to clean the blue eye with a brush hairs inside the drawer of the dvd, that's why I expect that the next step may be just to buy a few more recent records?

  G

  Hello

  My personal opinion is; the reader cannot process the community burned due to the stressed out laser lens. It turns out that your laptop and the drive is older than 5 years.
  I put t know how the drive has been used in recent years, but due to the long period of possible use of s that the lens cannot read data from the CD/DVD now.

  This is not unusual. My brother s book can not read the CD/DVD that were burned a year ago, I presume that it of the same reason the s drive laser lens problem

  Hmm you don t have many possibilities, you can try to burn these discs with another computer/laptop and then could check if you red the data.
  The last option would replace the drive

• Win7 does not start on my Satellite L500

  Hello

  I have Toshiba L500 and I have problem with my software. When I start windows the PC freezes and I see a black screen and the mouse. I tried to start it in safe mode, and then restarting the PC just and safe mode does not work.

  After that, I played the restore CD but the same as safe mode... When I run mode safe mode with the recovery CD, I get something, but my option is to wipe the entire hard drive. Then I tried to start Ubuntu Livecd to take my files but the computer restart again... I have no ideas if anyone can help me is welcomed :)

  Hello

  If you want to save the date, the recovery disc won't help you.
  The defined recovery disk notebook to factory settings, which means that the HARD drive will be formatted.

  If you need the data from the HARD drive, you could remove the laptop HARD drive and could connect to another computer using the USB to SATA (2.5 USB enclosure) controller.
  In this case, you could get access to the files on the HARD drive but it will work only if the HARD drive is not defective

• Cam sex is not correctly recognized on Satellite L500D

  Hello

  I have a Satellite L500D when I failed to connect in the web cam app appears and say web camera initialization. Please check your device and restart the application or computer.
  I press ok and the application closes down so I checked the Device Manager and there is no camera device.
  I downloaded the driver twice and that you don't always see the driver in the Device Manager box.

  Hello

  That s quite strange.
  What is your laptop pre-installed with original Toshiba (factory State) recovery image?

  Everything is possible and it can be faulty cam but the best way to find out is to install the OS using Toshiba HDD recovery facility. After doing this, you will have to new factory condition.
  With the factory settings, each hardware component should work fine.

  Do not install any additional software. After finishing OS installation webcam control functionality to see if the same thing happens again. If there is the same situation contact the closest service Toshiba and explain the situation.