BDV-E780W died in waiting
Hello! I have a new box BDV-E780W and often died then in standby mode. It works great when I use it, I stop on the remote control and the next day, when I try to start it will not respond to remote or the buttons on the device. It is quite dead. If I unplug power it won't always answer unless I keep it unplugged for several minutes. The same phenomenon also occurs after I updated the firmware.
I have digital PVR (or whatever this is, one thing that saves on hard drive) connected via HDMI but I don't really use it through this box. I also have a connected network cable. Any ideas if HDMI or network could make the matrix of the system during a sleep mode?
Thanks for the reply. After I disabled automatic updates of network and the functionality of party, I didn't saw that system to die more. Then perhaps, she tried to go to the network all waiting and got stuck there.
If I see the system to stop again I'll follow your instructions.
Tags: Sony Products
Similar Questions
-
Easy Web browser control?
Can I use for my BDV-E780W easy browser to use keyboard or mouse? I only can it control by remote control...
You can plug a USB keyboard into the front USB port.
No mouse or wireless support. -
Hi Experts,
1 can you please let me know why we need to set up under IP addresses for the RAC configuration and what is the role that each plays?
-Public
-Private
-Virtual
-SCAN
2. What is the relationship between IP SCAN and virtual IPs?
ConcerningHello
859875 wrote:
Hi Experts,1 can you please let me know why we need to set up under IP addresses for the RAC configuration and what is the role that each plays?
-Public
Configured before installation for each node and can be resolved at this node before installing.
Role:
Enable Virtual/SCAN configuration/communication between the nodes in the cluster. Do not start the Clusterware without public IP Interface/address.
Virtual/SCAN will work as an alias IP on the public Interface on the Public network.-Private or interconnection
Configured before installation, but on a separate private network, with its own subnet, which is not resolved except by other nodes in the cluster member
Role:
Clusterware uses for cluster synchronization (network heartbeat) interconnection and communication of demon among the nodes in the cluster.
RAC uses the interconnect for cache fusion (UDP) and inter-process communication (TCP).
Cache Fusion is the remote Oracle buffers, shared memory mapping between the caches of the members of the cluster nodes.-Virtual
Configured before installation for each node, but not currently in use. IP, VIP and treats public SCAN addresses than any other addresses on the same subnet.
Role:
The goal is the availability of the applications. If add or remove nodes as your remove VIP client config (with SCAN, it is not necessary)
When a node fails, the VIP associated with it is automatically failed over to another node.
Without using VIPs or FAN, clients connected to a node who died often wait a TCP timeout (which can be up to 10 min) before getting an error.
So, you don't have really a good HA solution without using VIPs and FAN. The best way to use the FAN is to use a client integrated with fast connection failover (FCF) such as JDBC, OCI, or ODP.NET.-SCAN
Three static IP addresses that are configured on the server (DNS) domain names prior to installation so that the three IP addresses are associated with the name provided as the SCAN, and all three addresses are returned in random order by the DNS to the applicant
Configured prior to installation in the DNS to resolve the addresses that are not currently in use. Addresses on the same subnet than all other IP addresses, addresses VIP and public SCAN
Role:
The goal is the availability of the applications before clients establish communication with CARS and make the whole of the Cluster completely transparent.
IP SCANNER is a new 'layer' (oracle) with high availability network that allows to modify the characteristics of your cluster (IE add/remove nodes) without having to change the configuration in their concept of customers 'grid '.
>2. What is the relationship between IP SCAN and virtual IPs?
IP SCANNER is used to receive new connection requests and redirects to the VIP IP.
The virtual IP address sets and allow failover of connections after connection is established.When the client requests a connection, Oracle Client 11 GR 2 find for IP addresses and create a list of all IP SCAN available for this host-scan, the first attempt to connect to RAC uses one of the available SCAN IP addresses.
The listener ANALYSIS will receive this connection and re - direct to one of the available using LOCAL_LISTENER nodes from that time the connection is made by using the virtual IP (VIP).All SCAN/VIP must be resolved by the DNS.
The customer knows that there is only the Hostname SCAN, which is configured in the connection string.
Once the connection is requested Oracle Clusterware redirects the connection to one of the VIP host name must be resolved by the DNS.Kind regards
Levi Pereira -
How to set the default value to 1 HDMI?
Have a BDV-E780W
Whenever I turn it on, he is by default on television. I have a cable box properly connected via HDMI to Sony, the Sony is then connected via HDMI to the TV.Whenever I take the Sony remote, press the "Function" key 3 times to get to the main menu, then right turn port HDMI 1.
Pain in the anus! Will be back for a Bose system if we can't get this resolved
Thank you for your post and welcome to the forums.
Make sure the HDMI control feature is disable on your drive Blu - ray Home Theater System. Second, reset the BDV-E780 to factory default settings. If the problem persists after reset, contact the Support team technique Sony so that the problem can be studied: http://esupport.sony.com/US/perl/suppor... l = BDVE780W
-
Aggravated with the update from my iPhone
It is a list of the problems I have with my iPhone 6plus since updating to IOS 9.3.5.
- A single date after update my touch screen froze and I was unable to trouble or to use until the battery died and the phone has rebooted.
- Since this restart my touch screen hangs for 5 minutes at a time at least 5 times per hour.
- My screen goes completely black 20 seconds in the reading of an article. I have to refresh my browser at least 6 times by reading an article on the web.
- If I'm in iBook I can't read yet a page without the screen goes black. I hit the home back to iBook button try to keep reading where I left off the coast, but within 20-30 seconds it goes back to black.
- While I'm typing, even this message, I hit the button of the space and the words are charged or inserted which does not appear. I myself taking much time to type anything bc I have to go back and get rid of the words that the phone has decided to him only to change or insert.
- Improvements that never going to this last day f__d my phone. Difficulty what you did in the last updated bc I will eventually lead to an Apple Store and throw the phone home.
What have I tried to fix it. Everything. For many in the list and you already know what the normal things are that the average person would be difficult it phone. I have no problems until I updated to iOS more recent so caused my problems of telephones you people. PLEASE FIX NOW
Thank you
Debbie
I posted my severe issue with the iphone since the last update August 28, 2016 at 12:27 and watch to see when your system has declared that I posted my question that I call a problem so I guess you can add that to my problems too. OH nothing automatic record is
-
Please help with /el capitan iPhoto and iTunes /pet died need photos please
I'm on an iMac El Capitan 10.11.3 running. I am also running iTunes 12.3.2
I am also running and the iPhone 6 Plus 9.2.1
my pet has just died and I would like to put pictures on my iPhone of assorted external hardeives and rebuild an iPhoto library. I also want to access the menus of iTunes.
Its been beyond frustratiing as Apple has really changed the display and options to iTunes, iPhoto... .the option NOT automatically open iPhoto is no longer there.
I also can't access the menus at the top of the iTunes page as before.
MY questions are closely linked.
1. where and how can I access menu options in iTunes.. terms itunes is just a FULL screen (which is editable?)... impossible to find or to orient the menu in a way that is understandable?
2. How can I keep iPhoto to open whenever I plug in my iPhone?
What versions of my above characteristics could help me keep things simple... especially at a time of crucial as now. Thank you and all help is greatly appreciated.
I want to especially the photos to be easy to put music on my phone... can wait, but I never had so many problems with Apple stuff as today. I realize a large number is defined by the user, but I need help.
-
Problems with the MacBook Pro after the new update, restore or wait?
I recently upgraded my Macbook with the new update of security El Capitan and I saw that the update is more buggy that is useful. My battery is dying much faster with the same amount of use and my internet constantly disconnects and reconnects if I'm on internet applications. I also found that if I drop something in my computer, the wifi will stop then as well. Should I try to reinstall El Capitan or do I have to wait until the bugs are fixed? (If they will be by apple)?
Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support
-
My Qosmio F10 died after the update of the Bios
My Qosmio F10 died after update BIOS... it doesn't work anymore... I update the bios from 1.10 to 1.20
the switch Led is still orange...What can I do to make it work again? or the version 1.10 back?
Hello
As much as I know you can't return it to the previous version. Try to remove the battery and wait for a short period.
Do BIOS update as described in http://www.toshiba-tro.de/gcc/biosinfo/index.html?
-
Juice spilled under MacBook pro 13 "early 2011 a1278 and he died. Can I still save it.
at about 19:00 2 days ago, I spilled juice on my MacBook, and I freaked out so I deleted for awhile and then hurried to dry off the coast. I then continued turning power on and off until it dies eventually completely. I know now that all the mistakes I made so what I did after he died was I opened the back and let dry. After more research I found some guides on how to clean the contents of the folder correctly, but all the stores have already closed at that time so I waited until the next day to buy all the tools and denatured alcohol and proceeded to disassemble the product and clean following the guide. I then waited until about 2 hours before now to go up the MacBook and the battery showed 1 green light but nothing else has worked, not even the light on the charger lights up. I opened and found that a partbof map logic heated very quickly when I plug the charger. So my main question is whether or not my MacBook still salgeavable or not. Help, please.
Where I am right now 19:40
-
DaqMX wait the next sample causing slow down Clock.vi
Hello
I have a question about the proper use of DaqMX wait for next sample clock.
I read channels analog voltage on a map or pcie-6259.
I would like to read as soon as possible make your comments between each of these points of single data points.
I wish I had an error generated if I miss a data point.
From reading the forums, I've gathered that the best way to do it is using the Timed Single Point material.
A simplified program that I use to test this is attached.
If I remove the DaqMX wait for next sample Clock.vi, my program seems to work.
I added a counter to check the total time is as expected.
For example, the program seems to work at the speed appropriate for 120.
However, without that vi, it seems that the program does not generate a warning if I missed a sample.
So I thought that the next sample clock waiting vi could be used to determine if a single data point has been missed using the output "is late."
However, when I add inside as shown in the joint, the program seems to slow down considerably.
At high rates as 120000, I get the error:-209802
14kHz is the approximate maximum rate before you start to make mistakes.
My question is: is this the right way to check a missed sample? I don't understand why the wait next sample Clock.vi is originally a slow down. Without this vi, the program does just what I want except that I do not have strict error control.
My confusion may be based on a lack of understanding of real-time systems. I don't think I do 'real time' as I run on an ordinary pc, so maybe I use some features that I wouldn't.
Thank you
Mike
Mike,
You should be able to read to return delays errors and warnings by setting the DAQmx real-time-> ReportMissedSamp property. I think that if you enable this, you will see errors or warnings (according to the DAQmx real-time-> ConvertLateErrorsToWarnings) in the case where you use read-only. I'm a little surprised that you have measured your application works at 120 kHz without waiting for next sample clock (WFNSC), although I'm not surprised that it would be significantly faster. I think if you call read-only, you'll read the last sample available regardless of whether you would of missed samples or not. When you call WFNSC, DAQmx will always wait for the next, if you are late or not sample clock. In this case, you will wait an additional sample clock that is not the case in read-only. Once again, I expect that, in both cases, your loop would not go to 120 kHz.
Features real-time DAQmx (hardware Timed Single Point - HWTSP) are a set of features that are optimized for a one-time operation, but also a mechanism to provide feedback as to if a request is following the acquisition. There is nothing inherently wrong with using this feature on a non real-time OS. However, planner of a non real-time OS is not going to be deterministic. This means that your app 'real time' may be interrupted for a period not confined while the BONE died in the service of other applications or everything he needs to do. DAQmx will always tell you if your application is to follow, but can do nothing to guarantee that this will happen. Thus, your request * must * tolerant bet of this type of interruption.
There are a few things to consider. If it is important that you perform the action at a given rate, then you should consider using a real-time operating system, or even with an FPGA based approach. If it is not essential to your system, you might consider using is HWTSP, where you do not declare lack samples (DAQmx simply give you the most recent example), or you could avoid HW timing all together and just use HAVE request to acquire a sample at a time. What is appropriate depends on the requirements of your application.
Hope that helps,
Dan
-
A week, maybe two, it trafficking, especially firefox, IE, and some games, refuse to die. They die when closed regularly, since the Manager tasks, or even the process of killing programs. I think it's very annoying that I have to restart my computer because frequently used programs are hogging all the memory or an instance program refused to run because there is already a running. I lost the work on this problem. Is this something that happens to other people? Is this a ploy to get everyone to install 7?
I have no spyware, malware, viruses or Trojans that is recognized by all major spyware/malware/Antivirus programs. I'm also fairly warned the process that needs to run and routine maintenance, so I doubt I have something went wrong along the way, I know this mainly because I didn't mess with anything as config and registry. There is no program or registry changes any where near the time it started to arrive.
I would also like to add that the reboot does not work, it just hangs. I have to do a hard reset.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Wait 2 weeks for repair NBD - what are my options?
Bought Dell XPS13 in 2015. The screen died in January and Dell has replaced the motherboard then.
Screen still dies more than 2 weeks, and my case for replacement has been open since. The repair of the business day next is waiting for parts to arrive.
What are my options? I am extremely dissatisfied with the support received, also do not really trust Dell to be able to solve this problem, taking into account several people have reported the same problem. (example here)
Hello! Usually NBD support is dependent on the availability of the parts as well until they get the parts they cannot fix. You have an option to Exchange renovated after 3 attempts to repair the unit, but it looks like they're working on the attempt 2. If you want you can send a private message by clicking here, for Dell-Robert P. and he may be able to help.
-
Separated from this thread.
My ACER Aspire 3100 died. I restored this Dell Optiplex 745 and want to run my old Windows7 Home Premium to my ACER on my current machine. Is it possible to transfer the license to new hardware? Here's the diagnosis:
Product key of Windows7 Home Premium for AcerAspire3100Windows 7 Home Premium migrated to Dell computer
Diagnostic report (1.9.0019.0):
-----------------------------------------
Given WGA-->
Validation status: invalid license
Validation code: 50Code of Validation caching: 0x0
Windows product key: *-* - 74XYM - BH4JX-XM76F
The Windows Product Key hash: KeYfcvXg/a1Q01x73 + f8IL/JC4Y =
Windows product ID: 00359-112-0000007-85999
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {3E137034-9496-4E30-B0A9-557B440CD2E3} (3)
Admin: Yes
TestCab: 0x0
WGA Version: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.140303 - 2144
TTS error:
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Enterprise 2007 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{3E137034-9496-4E30-B0A9-557B440CD2E3} 1.9.0019.0 6.1.7601.2.00010300.1.0.003 x 32 *-*-*-*-XM76F 00359-112-0000007-85999 5 S-1-5-21-144871190-1108465423-1748584281 Dell Inc. OptiPlex 745 Dell Inc. 2.3.1 20070521000000.000000 + 000FA803607018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 DELL B8K 100 100 Microsoft Office Enterprise 2007 12 Y9u6AV6ROLix7muKCr67SHEI3 + 4 = 81599-872-5374781-65113 1 15FA07F43EF9ED0 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00170-112-000000-00-1033-7600.0000-1292014
Installation ID: 016760155910838136584500866031194393756542210431530004
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: XM76F
License status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 4
Trust time: 01/09/2014-21:49:48Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C532
Beyond: PASS
Event timestamp: 9:1:2014 21:48
WAT Activex: registered
WAT administration service: registered--> HWID data
Current HWID hash: MAAAAAEAAwABAAEAAAACAAAAAQABAAEA6GFW3JyFTmu2hi73wOvS6a5dQj32JyqFActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL APIC B8K
FACP DELL B8K
HPET DELL B8K
STARTING DELL B8K
MCFG DELL B8K
SSDT DELL st_ex
ASF! REFERENCE DELL B8K
TCPA DELL B8K
B8K DELL SLICIf the Windows 7 Home Premium pre-installed with Acer, the answer is no, you cannot transfer it.
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GBLicensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspxIf it is a license purchased in retail store, the answer is Yes, you can transfer, but you may need to reactivate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Can I transfer 1 a Win 7 Home premium family pack license to another machine in the original hard drive died.
As long as you do not exhaust all your licenses, you can transfer it. Please note, the Family Pack is an upgrade, the machine that you transfer must have a license of previous qualifying installed (XP or Vista).
You may need to reactivate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
have Windows 7 Professional, Office, Project, Visio, etc. on a laptop which is essentially dying. All are purchased at retail. I need to install on a new machine that was bought to replace one who died - how to do that my activation and licenses are in compliance
Just reinstall it on the new computer and reactivate it if necessary:
64 bit 32 vs
http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
My PC running the 32-bit version or 64-bit Windows?
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
----------------------------------
How to reinstall Microsoft Office:
How to reinstall or repair Microsoft Office : Notebooks.com
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usHow to reactivate Microsoft Office:
Microsoft Office Activation number:
http://support.Microsoft.com/kb/950929
Maybe you are looking for
-
When I activate the WEP security on my router (belkin F5D7630-4 (a) and on my laptop (satellite p20 801) I can no longer connect to the router. I tried 64 & 128 bit encryption, I've also updated the firm ware on the router, no luckusing an atheros AR
-
Intel(r) 8280 1EB SMBus Controkler 24 3
geachte mijn intel (r) 8280 1EB SMBus Controkler 24 3 is al 12 JAAR OUD ENVIND OF GEPASTE UPDATE NIET OOK NIET MET UPDATE DRIVER DEZ GEEFT EEN VERKEERDE
-
I just bought a laptop HP ENVY 15 - j083ca Notebook PC. I upgraded to Windows8.1 Pro. Now some drivers need to be reinstalled, but when I go to the support page I can't find my model of laptop there. HP ENVY 15 - j084ca Notebook PC is precisely there
-
How to uninstall adobe reader 9.3.2,and op windows vista version
How to uninstall version of adobe 9.3.2,and reader I use windows vista operating system
-
Hello I would like to know if the AIM-VPN/EPII-PLUS (for the moment installed in SRI 2821) is compatible with modular router 1841? Thank you.