Beat mapping overview in 10.2.2?

Similar Questions

• Mapping and Tempo changes broke...

  Hey everyone here's another question I have...

  I beat mapping to a song, which changes the tempo in some parts of the song. Can I have the tracking Tempo / Beat mapping all moved or deleted regions or sections.

  Example:

  I want to shorten a song, so I try to use splits/cuts that I made in the regions of clear parts and then move elsewhere in the empty space to shorten the song.

  I hope that I myself explained correctly.

  Any help would be appreciated.

  OK I thought about it.

  Here are the Directions in case someone needs to know how to do this.

  Important!

  -First save your click on follow on a midi track, by going into the environment under "Click & Ports" window and the 'Midi click' wiring for "admission tickets" keyboard. Make sure that you UN-cable after you save your Midi click.

  I got my Tempo of the Beat song mapped to an Audio file and all other files have been created with this fluctuating tempo. In order to reduce the regions and place them elsewhere to shorten my song, so I need to do the following...

  1. Select all regions

  2. right click and select SMTP BLOCKING all tracks/regions

  3. see her beat mapping

  4. click in the header area of mapping beat (not in the field of vertical bars, but on the left area where says Beat Mapping. This selects all beat them Mapping

  5. press the button Delete to remove all beat them Mapping (this will change in turn your temp at a tempo)

  6. again select all regions

  7 right-click and deselect SMTP BLOCKING all tracks/regions

  Now all regions Midi and Audio are always synchronized, but you can move without them get out of sync.

• Another issue of queues DSCP/QoS/CoS of 6500/7600

  OK... a little confused, thinking, that I know what needs to happen, and what is happening now, but it is true UN-certainty with that I hope that people can help.  Here are the basic configuration:

  A---|6500|--10G--|7604|---10G---|7604|---10G---|6500|---B

  You get the point.  Traffic crossing A-> B or vica versa.

  All the links of the kernel are L3/Routed, not L2/Vlan/.1q/ISL

  Traffic is marked on the Board with a political map of penetration.

  Traffic is confirmed through DURATION that it contains both CoS and DSCP/ToS, leaving the 6500 s two-way headed the core of 7600

  Traffic is ALSO confirmed through extending classes * receipt * on the other side by the 6500, that DSCP is maintained but CoS is gone/0.

  Considering that only 6708 - 10G modules allow apparently dscp values mapped to the queues/thresholds, which leaves me with the research of the queue on the penetration (for VoIP traffic priority) with cos-of-queue / beat mapping as well as output with cos to queue mappings.  Of course, this is not possible (at least on the penetration) if the 7600 are not preserving the CoS on the output of the port.

  This leaves wondering if the 7600 are same queue evacuation traffic based on internal mapping supposed DSCP-to-CoS that is supposed to happen before the queue/Scheduler.  Interfaces are all set up as "trust dscp" right now.  So the CISCO docs should be rewriting CoS to 0 on the penetration and using reliable dscp values to determine internal DSCP, which in turn should be used with DSCP-CoS map appropriate queue on exit... I am a sceptic, what happens really... and unfortunately, have really no way to verify (that I know) because the show on the 6500/7600 commands are fairly primitive about QoS stats...

  Then, we have been re - think about it and thought that maybe the thing to do to solve this problem is to:

  -Trust cos instead of dscp

  -enable transparency dscp (no rewriting dscp) so it is kept on the side of the switch output

  And so by doing this it would be:

  -use CoS to tail of penetration

  -use CoS to output queues

  - And to preserve the original CoS and DSCP/ToS values

  Would that be correct?

  Two other config options I thought were:

  -queue only mode

  -mpls cos spread (although I don't think that would do what I want, but rather simply spread non-existent MPLS EXP bits)

  Any help would be greatly appreciated... I read so many different docs now, my head is swimming

  Couple of caveats-

  (1) all the below apply to pre IOS 15, as I have no experience with which it may be different

  (2) I have not used a 7600, but I used the 6500 much but both share a large number of the linecards and I suspect you're referring to this kind of linecards.

  The main problem is that the CoS value is contained in the 802. 1 q non-native added tag VLANs on a trunk link. But your links are L3 if there is no value CoS to preserve.

  This creates two problems for you-

  (1) input queues. On penetration, the queues are CoS based which means you need to a CoS value to assign packets into queues. On the 7600 s you're obviously not see a CoS value for the reason explained. Now, you can use a political map and a service policy to classify and mark inbound traffic. But, as far as I know, you can set the IP precedence or DSCP marking in a map policy on traffic of the penetration. Some cards like cards ARE for the 7600 support defining a CoS value but I think they are the exception rather than the norm.

  (2) output queues. You are right in what you say, IE. You can trust the DSCP/IPP incoming value and then, assuming that the line card doesn't support based DSCP output queue, the 7600 may derive a value based on the internal DSCP value CoS and then put in the correct output queue.

  Yet once, however, without a trunk there no value written in the packet CoS.

  I entirely agree that it can be very difficult to tell exactly what the 6500 in terms of marking internal etc. This is one of the great frustrations with the 6500.

  Hope some of that helped.

  Edit - the only way that you can trust CoS on penetration as far as I can see is to make the trunk links IE. you use a vlan dedicated for each interconnection and allow only that vlan on the link. Then you simply transfer the IP addresses assigned to the physical ports for the SVI to the new VLAN on each switch. You should make sure that the vlan that you authorized through the link was not the vlan native because you need a tag to add.

  Jon

• 1.1 update beat Google Maps

  After installation of update 1.1 and the reboot, when I try to launch Google maps from the Launcher, it goes in a loop as it attempts to load. If I do a universal finding an address and choose Google Maps as a search provider, it works very well, but since the Launcher it will not load. Anyone from another sxperiencing this?

  Dizzwave pointed out the difficulty that has worked for me - CLEAR PARTIAL.  Google Maps is now works well after partial erasure. RESOLVED as far as I'm concerned.  Thanks for the tip.

  PS; Make sure you have your email account and the available password or other internet connection available if you do partial erase because you need to reactivate your account.

  Message edited by Thudd on 07/24/2009 12:41

• What should I do to be able to use this software - maps of the Iceland; Overview of Iceland and flight simulator 2004? I am using windows 7 64 bit

  All of them seem to have compatibility problems.  Y at - there a patch or something that I can get?

  Hello

  Flight Simulator 2004 is compatible with Windows 7.

  However, we have not all results for maps of Iceland and the steering on the Iceland.  Therefor e, I suggest you to install these games in compatibility mode and check.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• Overview has used all of the memory on iPhone.

  iPhone 4 s 8GB. iOS 9.3.3.

  I used the overview for the different cities. After some time phone indicate there is little place in storage. How now to free the memory? How to remove a cache of these satellite photos?

  Have you tried restarting your phone or closing force maps app? (to make the latter: while the Maps app is open, hold down the power button until you see "slide to turn off".) Then hold the home button until you see the home screen)

• Lost Google images and Google Maps in Firefox

  I came to work one day and I see more pictures under Google is using the latest version of Firefox. I deleted the cache and I also deleted Firefox and reinstalled nothing doesn't. I can't see the images, fill out forms on some Web sites, or use Google maps in any capacity. I downloaded Google Chrome and everything works fine here. I want to keep Firefox, but should drop if I can't solve these problems. Very frustrating. Overview of the Ant would be greatly appreciated.

  Thank you

  CS

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  Please answer if this does not work.

• Disappointed with Beats and Apple. :-(

  Hi there does anyone have a similar story...?

  I had my headset wireless of beats for less than a year and have unfortunately experienced problems almost from the beginning. I just deliver the product off for the third time (if it is 4 times in the last 11 months) for a repair by Apple. Given the frequency of the problems (battery not charging, volume control is collapsed, ear piece broke in two, etc.,) I thought that it is prudent to contact Apple Customer Relations to discuss what would happen if this product has not yet given that surely there hypothetical until my one year warranty would have expired and they could tell me to walk.

  I don't know about you guys but money doesn't grow on trees, and I would like to buy things from brands as well...

  I called Apple this morning, and a person of customer relationships under the name of Rob proceeded to listen with courtesy to the situation. He shot to the top of the history of the product such that referenced and checked the info I had relayed to him. What I was looking for was a road map on how to proceed in the event that the product has beaten again.

  I proposed that, if an automaker has a defective car, they are a reminder, and if Apple has delivered, unbeknownst to them, a product that fails to realize that they would work to find a fair solution for their client/s. After all, Apple products, I (computers, iPads, etc.) are perfect so perhaps I we could pursue another solution by applying a token credit toward a future purchase when this repair imitates previous efforts. Equity? I suspected.

  It was my suggestion.

  Rob, after a pause of the enclosure, argued that Apple was not able to verify if my previous problems have been primarily true, since they do not have anyone to test the products they are returned. It seems only fair, they opted to send me a new product every time. I should be happy with this level of service, and if the product had to have a new problem and the guarantee should be active (that we know about the product is 11 months old), then proceed as they have in the past with a repair / replacement.

  For a product that has been difficult from the GET go I expect basically nothing from Apple. The agent that I had on the line says nothing about tribute to purchase in good faith. The proposal, which he said was almost cynical in his knowledge my warranty would be in place in a few weeks. Implicit is the fact that I can go for a walk when and if the product is defective for the fourth or fifth time.

  I want to give a shout out to Apple, that's not who they are. This "sitting bull" / instrasingent stand is not in the manual of anyones fair customer relationships. I can't help but think that, as a woman, they thought they could just sweep me under the rug and make me disappear. I could go further, but not before considering to put back money for a Apple product. I now have a suspicious reserve about Apple - friends of the weather... I paid a premium for a product I thought would deliver high-end performance and design and I got a lemon. Now they say meet go make lemonade.

  Ladies and gentlemen, this is not what the customer service and is close to the good corporate citizenship.

  Disappointed in Holland

  Maria Herrera

  have you complained using your http://www.apple.com/feedback/ comments?

• Beats Audio disable

  Beats Audio won't turn on or off.  That's all the time.  Button beats on the right side of the laptop has no effect.  "Fn + b" function key has no effect.  This is on a HP Envy 14.

  Hi chuggett,

  I am pleased that most of the issues have been mitigated.

  I also grasp that the buttons don't always respond on the keyboard. "" Here is a link to Portable keyboard troubleshooting (Windows 8), please not the section on "problem with additional buttons or volume control.  If this did not solve it completely, I suggest you contact HP support.

  Contact HP technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. The HP Technical Support site map

• HP BEATS SPEAKERS PROBLEM

  HI guys I have a problem with my audio speakers beats, when I try to complete the volume... sounds scary and boring speakers suggest help me I'll take my laptop to the Service? I buy thi online store is not guaranteed... map or whatever... A VERY GREAT HELP is much appreciated for me... im waiting as soon as POSSIBLE the guy im worried don't know what to do... im working here in Saudi Arabia...

  my laptop model HP Beats Special Edition 15-p030nr Notebook PC (ENERGY STAR)

  Hi there @MAGDSAL

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  If you are concerned about your warranty status, I would recommend that call you our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  It can check your status and work with you on the problem of audio.

  But for now, you have tried external speakers or headphones, and if so, is the sound the same?

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How do I eject the speaker (audio beats) for cleaning coverage

  My laptop is hp (dv6-7180se) and I want to clean the perforated lid which exists on speakers beats... Look at the picture:

  

  I can open it without screws open back?

  Please I need a few details to eject safely

  Hello @Fantastico,

  I read your post on how you're looking to clean the surface of your laptop speaker, and I'd be happy to help you in this case!

  As noted in Service and Maintenance Guide for your laptop, the only way to remove the top cover, where the speaker is to:

  1. Turn off computer
  2. The laptop power down by unplugging the power cord
  3. Disconnect the battery (see battery page 46), then delete the following:
  • Hard drive (see hard drive on page 47)
  • Optical drive (see optical drive on page 54)
  • Keyboard (see Keyboard page 57)

  Unfortunately, some removal of the screws will be necessary to remove the top cover and the speakers. The steps below should help to remove the cover in order to clean underneath:

  1. remove the seven Phillips PM2, 5 × 8. cover the 5 screws that anchor the top of the computer

  

  2. remove the three Phillips PM2, 5 × 5. cover the 5 screws that anchor the top of the computer.

  

  3. remove the nine Phillips PM2, 5 × 3. cover the 5 screws that anchor the top of the computer.

  

  4 place the right computer, with the front facing you.

  5. open the computer.

  6. release the corresponding ZIF connectors and then disconnect the following cables
  map of the system:

  Office button power cable (1)

  (2) TouchPad button Board cable

  (3) to fingerprint card reader cable

  (4) top of page cable speakers

  

  7. remove the three Phillips PM2, 5 × 5. cover the 5 screws that anchor the top of the computer.

  

  8. lift the back edge of the top cover (1) to the left and right sides have abandoned
  the base box.

  9. remove the cover (2). Make sure not to damage the thin base (3) around inside of blade
  Bay optical drive when you remove the top cover.

  

  10. reverse this procedure to install the lid once more.

  reference: http://h10032.www1.HP.com/CTG/manual/c03582006.PDF 

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• How to hide the layer of OBIEE map

  Hello

  We have created 2 topics, 1 Base map (BM1; with these 2 themes) and 1 Tiler (TL1; with Base map BM1) in the card writer and recorded layers and the background map in OBIEE.

  Theme1: Country (style: C.WOM_SEE_THROUGH)

  Theme2: Inventories (style: M.SMALL_CIRCLE)

  Then, creates a dashboard on this map.

  It is, then that launched in dashboard both countries and inventories appear, although different zoom_level is selected for 2 layers and the map seems clumsy.

  We would like, the launch that should show only the country while we zoom to layer of inventories, these markers should appear, and so on if we add more layers; as it is generally in the cards we get on the internet.

  Help, please.

  Kind regards.

  BTW, if the problem is that the theme of the inventories is included at the bottom of map (BM1) then the solution is to do the following:

  -Remove the theme of the substantive definition of map using MapBuilder or by changing the CLOB in the database. Save it.

  -Remove all tiles for TL1 tilelayer that uses the bottom of BM1 updated map. Do this from the admin console mapviewer manage page of layers of tile or removing all the subdirectories under the tile cache store on the server where WLS/BI/MapViewer are deployed.

  -Restart mapviewer or to all least purge the cache metadata for the source of relevant data from the datasources mapviewer admin console page.

  -Overview of the tilelayer, in mapviewer administration console manage tile layers page to check that the theme of the inventories is increasingly part of the background sheet.

  -Test the card/analysis in OBIEE

• Overview on mobile devices

  You can not set this app to connect with the mobile application of preview for display on your device?

  I guess you are referring to the iOS CC Preview Adobe for Photoshop app?  This iOS app only works with Photoshop.  XD preview mobile, please refer to our road map document:

  https://helpx.Adobe.com/experience-design/KB/missing-features.html

  One of the features on which we will work is overview of design in real time on mobile devices.

  Note that you can now share a design and discovered that on a mobile device:
  Adobe experience Design (Preview) help | Share designs and prototypes

• «Battery probe 0 (map system CMOS battery) is unknown to reading»

  We just had a service call on a Dell Poweredge R720 to replace a food which has become unusable after doing an update of the firmware of the life cycle of the Controller Firmware that has gone wrong for updating the firmware of power slot.

  Once the new PSU has been installed, the error on the console indicator went from orange to blue and the server does not work correctly.  No show error in OMSA.

  However, I use the plugin Open_Manager for Nagios/Icinga to monitor my Dell servers, and it shows an error on the R720:

  «Battery probe 0 (map system CMOS battery) is unknown to reading»

  Is there a way I can clear this error (especially without going through another service call)?

  Thanks for your suggestions.

  Hello

  You referred to a recent update of lifecycle controller, the package to update your firmware update iDRAC as well, if it is at version 2.10.10.10 that this is not a problem with the CMOS battery.

  Question:

  For 12 or 13G with firmware iDRAC 2.10.10.10 version or later, the State of the battery CMOS in OMSA may appear as 'unknown '.

  Why this happens:

  With the firmware of the IDRAC 2.10.10.10 changed the resolution SNMP. So the State of the battery cannot be resolved by the OMSA 7.x correctly.

  Solution:

  Update OMSA version 8.1 or later.

  I advise to use the iDRAC to obtain a status of real / live from the CMOS battery.  iDRAC-> overview-> hardware-> batteries.