Before problem simplified Pinyin (Mandarin)

Similar Questions

• Tonos and writing to the Greek keyboard before problem

  Description of the problem:

  By opting for the Greek language the keyboard will not enter Greek characters unless I press the SHIFT key. Then I can normally type Greek characters until I try to enter a vowel TONOS. When I press on; (next to (L) key the keyboard stops again and I have to press SHIFT to type Greek characters. In addition, no characters (vowels) with tones is entered.

  The used desktop PC is a HP Compaq DC7700 with Windows XP Professional in Greek language.

  If anyone can help?

  Hello

  Thanks for sharing the information.

  We are happy to know that your problem is solved. Please let us know if you have problems with Windows in the future.

• Adding accents for Pinyin El Capitan 10.11.5. I don't have a pinyin tonal accents 3 which looks like a rounded only on the bottom or slightly flattened v U.

  Adding accents for Pinyin El Capitan 10.11.5. I have no accent mark tonal pinyin 3 which looks like a rounded v only on the bottom or a little flattened U. I tried using simplified pinyin but makes me Chinese characters when tapped. I found a keyboard in the system of preferences that has this accent mark however the accent mark appears to the right of the typed letter emphasis must be on the letter typed. Any ideas?

  Best regards Raymond

  To type pinyin normally you use the ABC Extended keyboard layout (formerly US extended).  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html

  3 Tone is the caron, who is really a form of v.

  You shouldn't have any problem getting it above the letter, if you use the v option, then the vowel in ABC Extended.  ǍĚǑǓ

• The screen is discolored on Satellite C series - cable GPU problem?

  I installed flows at the start of the first question, since so I uninstalled flow and performed a system recovery to be double sure that the software of the laptop has been restored to its state before problem.

  No luck, so I tried a diagnosis from you guys, I can understand if its something I can fix myself or should I hire someone to do it.

  The laptop is only 3 months, so still under warranty but as I do not have the receipt I don't know if I can claim the guarantee.

  http://i.imgur.com/quQxSHk.jpg - download I tried via the forum, but it did not work

  You can reset the colors in graphics Intel utility? (Or utility AMD according to what specifications model you own)

• Satellite C660 2QH WLAN problem--loss of connection all the ~ 30 min

  Hello world

  I just bought a SAT C660 nine Toshiba and I faced a strange problem - I lose the internet connection every 30 minutes for about 3-5 minutes, then it connects all of a sudden again.

  I've been reading about the problem here and I fixed my power settings (although this also occurs when the laptop is plugged in), and I installed the new WLAN driver: 1005.19.0420.2011 (my Wireless LAN Adapter is: 8188CE). I thought that he that could have the problem in my anti-virus program, so I uninstalled. A few restarts later everything was as before - problem persists.

  Help, please!

  PS. I'm from Germany, where this is relevant.

  Hello

  Are you sure this isn't question of Wlan router?
  It would be interesting to know if you have the same problems with other devices connected to the Wlan.

  Next to the idea that this could be a router issue I think you should check some WLan Card settings.
  In the Wlan card-> properties-> tab Device Manager to disable the option to turn off the device to save power.

  You said that you have installed/updated test driver the driver from Realtek page too.

• Problem with F4280 all-in-one to scan / Vista

  Document scanning or the picture comes out as a total black page. Has been no change before problem appeared.

  Best regards

  Sossou

  Hi Schouw,

  Looks like it could be the scanner bulb or the material.  Please try the following steps:

  1 make a copy black & white of any document you have handy. Keep a close eye on the print, if you see the machine starts printing a large band of black on the page, and then press the button "Cancel" (red X) to stop printing.  In this case, it is the material.

  In an attempt to adjust the equipment, please follow: lines or streaks in the Copies or Scans

  If this does not work, you will have to HP to find out what your phone options: http://welcome.hp.com/country/w1/en/support.html

  However, if the copy is ok, then could be a software problem. Please try this instead: http://support.hp.com/us-en/document/c00040499

• DeskJet F380 cartridge Black XL problems

  Hi, I got the XL cartridges for my deskjet f380 for the first time. regular cartridges are empty, I replaced first the Tricolor and now black. The printer worked fine with the replacement of the Tricolor, but the habit now to work with the installed Black XL. I've deleted and reinstalled several times, black checked that the contacts are clean they are and there is no more suggestions in the book after that beyond replacement.  It feels as if it was almost too big for the carrier when it is installed and clings a little. I use more pressure inside to the smaller size. the cartridge is a registered dealer and has been a new HP cartridge, xl21, which is right for the printer, and as it is now some time after buying them they were installed I am unable to return to the store and I am not happy to have to pay $60 for a new test the theory that it is defective. Any other suggestions would be appreciated.

  Hi thanks for the reply, I bought a carton of smaller capacity and it works fine. Before problem seems to be the XL cartridge.

• Incredibly slow import after the installation of 2015.3.  Everyone knows a similar problem?

  Installed 2015.3 on 11/20.  Attempted to load 560 RAW capture via USB 3 CF card reader.  The CF card is a Lexar Professional UDMA 7.  I have not had before problems during import with this card, card reader or previous versions of Lightroom CC.  Import runs always over an hour later with less than 100 imported images.  Anyone else has this problem with 2015.3? 2015.3

  I don't know what caused the slow down, but I restarted my Mac computer running El Capitan and regained its normal fast process.  The difference is perhaps that I was cleaning of keywords and creating new hierarchies before you import the photos.

• Satellite A200 - no lights, no fans

  Hello world

  I have a toshiba satellite a200-244, and after about 15 months of use it allows to turn off his own time. I have half of heart sought the problem but could not get through to the main problem that I discovered later was dust in the cooling system.
  Anyway, shortly after it to close on its own I use to reactivate it and surprisingly enough it does not as hot as she sometimes did back in the day. Yesterday, it's same thing and it would not turn on back again. No light, no fans no response at all outside of a clicking noise from the motherboard which I will explain later.
  I did my homework, checked the wall brackets, power and supported adapter on the power button while the battery was out and tried to turn on the cable alone. No response.
  I open the aswell of laptop down to the motherboard (unchecked the aswell of cooling system) when I connect the power cable, it makes a noise clicking which is quite fast and hardly audible. (this isn't the hard drive or any other party than anything was unplugged)
  I did some research, I think the motherboard is fried, but I would like to than some entries from you guys and if that is the case, what would be the best thing to do. I've never had a problem with my computer of this before madnitude and all the other before problems have been fixed by myself.
  Any estimate of $$ suggestions is appreciated.
  Thank you

  Undisclosed, Salvation

  Have you already checked this article?
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Re: Toshiba L305 Satellite 1) screen is messed up and only start in safe mode

  * HELP! *

  Windows starts only in safe mode or safe mode with network. My screen is messed up (black and gray with horizontal lines and the screen looks like it scrolls continuously).

  I connected the laptop to an external monitor and it still does not start normally and I need to recover contacts from my iphone from itunes.

  Is there something I can do? I really don't want to lose all my contacts! I have to remove the hard drive and it burst in another machine and try to start windows normally to have access to my current drive with all the data that is on it, but I don't know if it works or if it's a bad idea.

  What could be causing the screen get all dirtied upwards and at the same time windows does not start normally? I have never had a virus before problems!

  Help! Thanks :)

  Hello

  > Windows will only start in safe mode or safe mode with networking

  It seems that the bootmanger is corrupt or something like this

  > I really don't want to lose all my contacts!

  I know, I Safe mode, you have access to all data on the hard drive. So, you can move all the important data on USB or on the partition (if available) 2 nd on your hard drive and you don't need to remove the hard drive
  Then you can reinstall Windows with a recovery disc or by using the disk copy of Win. This is the best solution in your case, try to fix windows can take a lot of time as a new installation.

• Re: Satellite 2455-S3001 - LCD no longer lights

  I have a Satellite 2455-S3001 part #PS245U-074966. The lcd screen no longer lights upward.

  I can look at the screen and see the screen works (with a flashlight, I can see images on the screen). I want to solve this problem, but have never worked on display like this before problems. Before, I looked at this problem and what I've gathered, is that it might me a converter fl (forgive me if this is not correct, it's been over a year I did research).

  I would like a definitive answer and not one, perhaps, money is tighter than it used to be.
  John

  When you say converter do you mean FL inverter. Do you have?
  In my view, FL inverter is faulty.
  Have you checked some online shops for a new game?

• HP DV6 laptop with no headphone port

  With no helmet that I have to get some kind of hdmi headphone adapter?

  AARGH I'm so stupid
  They moved the front ports! Never seen that before
  Problem solved

• Motorola CLIQ keyboard does not!

  I had a great time with little or no hiccups at all with my cliq until today when the keyboard stopped working! ABSOLUTELY nothing on the keyboard works. I'm still in my buyers remorse and can go and replace it without problem, but it's a complete argument. I called t-mobile and told me to do a factory reset ALL lose, and by everything I mean everything THAT I had tons of numbers, I'm going to request manual AGAIN after 2 hours to do the first time. Now after all this drama it happened again!

  I'm curious to know if anyone has had this problem? technical support asked if I had downloaded applications and I said yes I have the barcode reader, yelp and facebook app. That's all. I had a google app to look more shady was not google that I na not re-download after my reset just in case. thing, is that I got these applications because I got on the phone and he is VERY young, one hour before, problem. I have not dropped the phone and I did not get the wet nothing happened I treated like a newborn.

  If the applications will crash my phone there is no need to have that I would rather just go back another piece of tech lame if that's the case.

  You must return it to the store for a replacement, then as there must be a hardware problem.

  Please let us know your results.

• Script error message prevents printing from Explorer or send an e-mail using HP deskjet 3050 a 3611 series

  A series of 3611 using HP Deskjet 3050 has (last new material before problem) on Windows 7 64-bit and Windows Internet Explorer 9.1.10 - when I try to print I get no numbered error reading message "an error has occurred in the script on this page" it goes then with some details that vary with the material, I am trying to print, and then I can't print - I did some Internet research and could not get (or understand) suggested methods of repair other than comments - which suggest that HP is a source of this type of problem - or the last loaded device - I rebooted HP a couple of times with no benefit - the HP print well from a source other than the Windows Explorer or G-mail - I use a workaround to copy my wording of the text and print it easily - suggestions?

  You will just need to clear your cache and you should be able to print again from the Explorer and e-mail. Here's a link below that will help you on how to clear the cache.

  http://www.WikiHow.com/clear-your-browser%27s-cache#Internet_Explorer_9

  Hope this helps, thanks.

• The share of customers unable to access the network - error 0x80004005

  Hello, my network has the following configuration.

  • Server - Windows 2003 Server - acting as DNS, domain controller, file server
  • Clients - Windows XP Pro, Windows Vista business, Windows 7 Pro
  • DHCP server is on my router. All customers running on DHCP

  For some unknown reason, some network sharing has stopped working since yesterday. When users connect by Ctrl + Alt + Delete by using their network accounts, they are unable to access their computers in office, services, Skype etc., gives an error of 0 x 80004005 (unspecified error). They are not forced to use roaming profiles.

  I opened Windows Explorer and typed \\server\share. The same error is invited. However, if I try to access the share of \\ip\share, it can show me the files without a problem.

  I took to refine measures issues

  • Connectivity - outcome of the network: Internet access / access server by IP. So no connectivity problem
  • Ping-ing the name of the computer server - result: OK. So not a DNS problem
  • Check firewalls – result: Clients running Windows Firewall correctly. Network type, the value of 'work '.

  Other facts that may be useful

  • No third-party firewall. All running on Windows Firewall.
  • No settings changed before problem appeared
  • Problem appeared after a reboot the server

  (P.s. Skype prompted "Cannot find necessary files and cannot start". "I think it's the same problem with network shares, because the application data is also stored in network shares.)

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.
  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer