"Beginning of threads crash recovery 1.

Similar Questions

• After an automatic update of Windows and stop, Firefox does not remember my tabs open at startup. Better Privacy does interfere with Crash Recovery somehow?

  Better Privacy does interfere with Crash Recovery somehow? My computer is automatically installed a Windows Update at 03:00 and switch off. When I started out, I had to restart Firefox. Firefox came without any of the tabs that were open when the PC went to bed the previous night. I spent an hour looking for what happened to my tabs, without success.

  This has happened

  Just once or twice

  == Automatic update of Windows shut down my computer in the middle of the night.

  Hello.

  It is possible that it was by force the windows closed so your firefox which makes you forget... Have you tried to crash your Firefox to see if the session is not restored?

  To plant your Firefox, simply there open, press CTRL + SHIFT + ESC and then, on the process tab in the window that appears, complete the process firefox.exe. That will force Firefox to close at this moment. Do start again. If it works, ok, so it may have been a case isolate. My recommendation is to configure your windows does not install updates without your intervention. Choose something like 'ask me what to do' or something like that.

• Crash recovery system factory

  Hi guys,.

  I was doing a system recovery plant for about 2 hours. I have completed the formatting and reinstallation of recovery disks 1, 2, 3 and deleted records. The system continued to install packaged software and was nearly 95% through when it suddenly crashed.

  After the reboot of the machine, I get the error the installation is not completed and I need to install again.

  Is it possible to recover and complete installation, or I have to start all over again from the beginning of the formatting and insert discs 1, 2 and 3?

  Thank you

  Product: FV713EA #ABV

  [email protected]
  4 Gega
  320
  GeForce 9600

  Well, I don't need the CD. But I still get an accident after another.

  Thank you

• Where are my e-mail messages after the crash recovery and pc?

  I have a 3 years old Toshiba PC running Vista Ultimate Service Pack 2 and Windows Mail.  PC crashed.  Do you have a full recovery.  Now two problems.

  The BIG problem is: the only Windows Mail messages are when I started it up after recovery of 3 years and more - they come from my old pc.  It is not all messages generated or received since I have this pc.

  The second problem is sometimes when I try to send from within Internet Explorer, when I click on the Page, click on "send link by e-mail" or "send page by e-mail".  I get an error message that says: "default mail client not properly installed. But not always.  What is everything?

  Thanks for any help in the search for my posts.

  See here for information on how and where WinMail stores its messages: www.oehelp.com/backup.aspx#wm
   
  Steve
   
  "Nillwilla" wrote in message News: fd968872-84 5-4ef6-bd57-06a493e5fd56...

  I have a 3 years old Toshiba PC running Vista Ultimate Service Pack 2 and Windows Mail.  PC crashed.  Do you have a full recovery.  Now two problems.

  The BIG problem is: the only Windows Mail messages are when I started it up after recovery of 3 years and more - they come from my old pc.  It is not all messages generated or received since I have this pc.

  The second problem is sometimes when I try to send from within Internet Explorer, when I click on the Page, click on "send link by e-mail" or "send page by e-mail".  I get an error message that says: "default mail client not properly installed. But not always.  What is everything?

  Thanks for any help in the search for my posts.

• FireFox is no longer crash recovery of open tabs. Management of tab has changed. How can I get the old behavior?

  All my old tabs are missing after a crash. I chose "view my tabs, windows and last time ', like the start option. Many unwanted changes in tab management happened recently. For example when I close a tab in a window of the two tab, I see a blank screen (see picture). Preview display seems to be broken (see attachment). How can I get the old behaviour back?

  After researching the issue, it seems that the problem was a problem of NoScript configuration. After restoring NoScript to the default values, the tab number disappeared.

  Thanks for your help.

  MELL-

  (~ J99) Also note

  mellpell said

  Looks like it's a known problem with Image Tweek:
  http://forums.mozillazine.org/viewtopic.php?p=14029673#p14029673
  https://github.com/CAFxX/ImageTweak/issues/37
  https://github.com/CAFxX/ImageTweak/issues/40

• Have Windows XP, HD crashed, recovery disks don't work, the new HD installed, have no windows XP disk, I have the product key. How can I install windows XP

  HP S4200NX was stopped abruptly after a PC waiting longer than normal to stop.

  Next tried to boot the PC. Safe mode options is displayed. Selected options, nothing has worked.

  Ran test, HARD DRIVE SMART 1 FAILED SHORT SELF TEST. Couldn't use recovery tools, disk set.

  Installed a new HARD drive. Message received the error 'could not locate the MS user agreement acceptance. " The last error message is

  "NTLDR is missing"

  Office did not come with a windows disc, but it has a label Microsoft of authenticity with the product key on the top of the PC.

  I'll be able to get software for Windows XP Home Edition

  Reinstall Windows XP by using recovery disks in HP S4200NX.

  http://h10025.www1.HP.com/ewfrf/wc/doclink?LC=en&cc=us&product=338684&tmp_docname=bph07145

• VM crash - recovery ideas?

  Hello

  I had a VM open with XP Pro running.  I went to Excel 2008 under OSX and got the famous spinning wheel of color.  I could go back to the virtual machine and he suspended and restarted the Mac Pro, think that the virtual machine were safe.  Well, it turns out, it's was not only not sure, there summer altered so bad that explorer.exe can not start!  I was one day away from my scheduled backup, but of course, it does not help.  I need to get a file on the VM, corrupted.

  Someone at - it other ideas for recovery?  Is there a way to access the files in the virtual computer even if the browser does not start?

  Thoughts or ideas greatly appreciated!

  JohnZonie wrote:

  Someone at - it other ideas for recovery?  Is there a way to access the files in the virtual computer even if the browser does not start?

  VMware Fusion (menu bar) > help > VMware Fusion help > managing Virtual Machines > VMDKMounter to help mount a virtual drive as a Mac Volume

  Note: My experience when using VMDKMounter was that if no error message appears, then the virtual hard disk has been mounted and it appears usually on the desktop as an icon of white player named "Untitled".

• problem reconfigure everything. in the replication after the database crash recovery

  Dear friends, I have little problem in replication,.
  I have 2 databases DB1 and DB2 configured as Multimaster replication and My DB1 is master def. Now my master got DB2 database crashed and replication topology displayed in red color.
  So I again created DB2 database. So I tried to bring this new DB2 replication again some of the operations being on my site of master def.
  So the problem is that I couldnot stop replication
  Can anyone suggest me how can I reconfigure again back in replication without removing the current group of rep
  
  I tried suspend replication by Lee. intervention but couldnot
  
  Start
  () dbms_repcat.suspend_master_activity
  gname = > 'REPMG');
  end;
  
  can someone solution
  Note:
  my database got crashed and I recreated the database and made available in the position while he was just before the crash

  Even if 'create you' repadmin and links from the database, there is no information about the configuration of replication (repgroup (s), repobjects etc.) in the database. Also, of course, the deferred transaction queue has no entry.

  You must configure replication scratch 'from '.

• System crash recovery

  My iMac 2011 mid running only yosemite 10.10.4 recently suffered a hardware failure the likes of which I've not seen since OS9. When the computer reboots, the computer initially known problems of recognition of keyboard and then exposed critical infestation beach ball that left the computer unusable for any application practice.

  What I tried:

  Repair disk utility permission - no effect

  Upgrade to Yosemite 10.10.5 - no effect

  Apple Hardware test - reported no errors

  Secure - all too slow start

  Cleared Cache, saved application State ~/Library and LaunchAgent files - this provided a massive temporary performance boost, but within an hour, half of the beach balls was returned.

  What else can I safely delete in / library or ~ / library?

  Is there anything else I should try before you reformat the hard drive and reinstall the OS?

  Newspapers, you're really the only thing that you can safely remove the library files.  The rest are supporting for various applications.

  A start minimizes startup items and kernel extensions.

  Your Mac's PRAM Battery is probably age (in four years).

  The other thing to consider is running Etrecheck to search for everything what you installed that should not be installed.

  We can look at the resulting report of the Etrecheck system for you tell if there is another thing that can be a problem:

  http://www.etrecheck.com/

  And no, system updates set system slowness.

• Lost of Age of Empires II, disc 1 (legal, product owner was purchased) - cannot install after crash recovery

  I would like to contact MS, but without a product ID, you can't get in their support network!

  I bought AOE III, still packing original (with the product key), but can not find the disc 1.

  Anyone know how I can get a new disk image? Is there anyone who knows how I can contact MS without serial number?

  THANKS IN ADVANCE FOR ANY HELP YOU CAN OFFER!

  Hey Joe,

  You can download the Setup file to install Age of Empires 3 by using the Microsoft Download Center. Here is a link to download:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=F627E37B-A8E8-4537-9A88-3C19B670C92A&displaylang=en

  All that it is a version of train you can upgrade to the full version by using the product key that you have on the CD packaging.

  Hope this information helps. Let me know if it worked.

  Thank you
  Irfan

• Post Crash Recovery

  Hi and thanks for any help someone can give.

  My computer froze and I was forced to restart without having had a chance to save.
  When I reopened the elements (version 11) and checked the AutoSave file he had all my blocks/frameworks that I had when I fell...
  However, a lot of executives did not contain the images real and rather displayed a screen saying something on offline media, don't remember exactly what he said.

  My question is, is there an easy way to put this film in their blocks on the editing screen, since the blocks themselves are still there?  It's a lot of work to cut down each of the clips to the right size and the right of distribution for all changes (video made to go along to a song).  A large number of these blocks are super fast "flashes" of a clip.

  If this isn't the case, I guess I'll have to do it again, but if someone knows an easier solution I would appreciate the help.

  Thank you.
  J

  glaxocrux

  Take one of the last backup to automatically, right click, select open with, and then Adobe Premiere elements 11.

  When you do, you will be greeted with "Where is the file _?" message 1. There is no longer any doubt after answering the question for message 1.

  These messages are your way to reconnect support source for the project. That's it as far as you know where the missing media on your computer (you can actually find and see their drive hard save location). If you are lucky, then responding to a message, can trigger more open spontaneously.

  Media - project disconnects usually occur if

  a. you moved, deleted or renamed files and folders after the project has been saved closed.

  and/or

  b. you store your media source on an external hard drive and external hard drive has failed... perhaps that the drive letter has changed.

  Please review, study, provide more information. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• Management of vSphere vCenter crash recovery

  hardware server vCenter failed and two vSphere server are always associated with this server.  You want to disassociate the two servers with the old VirtualCenter and establish a new connection with the new vCenter server.

  Environment:

  5.1 ESXi server (production)

  4.1 ESX Server (production)

  Server device (not longer exists / dead) vcenter 5.1 running on separate 5.1 ESXi Server

  Scenario:

  5.1 vCenter server to manage both production above vSphere servers.  The material which housed the vCenter server has failed and is unrecoverable.  Both servers are accessible through the vSphere client.

  The ESX 4.1 Server I get the text next message when you use the vSphere client: "this host is currently managed by the vCenter Server Server with the address IP X.X.X.X. changes to this host this session can now be reflected in sessions clients vSphere watching the vCenter Server.»  The management host, under the summary poster tab: "this host is currently managed by vCenter Server X.X.X.X..

  The ESXi server 5.1 has received the same message when you use the vSphere client until I chose an option under host of disassociate or disconnect with the vCenter Server Management (don't remember exactly what was the option).  It succeeded, to some extent.  When you connect to the server ESXi 5.1, it does not present the message indicated with the ESX 4.1 server.

  A different vCenter server has been installed in an attempt to restore a centralized without success.  Adding a server as a host to the data center generates the following error message: "failed to contact the specified host (serveur7). "The host may not be available on the network, is maybe a problem of network configuration or management on this host services may not respond.

  Objective:

  To dissociate the two servers with the old VirtualCenter and establish a new connection with the new vCenter server.

  Any help would be appreciated.

  Thank you.

  Can you confirm the new vCenter Server is properly registered in DNS and is able to resolve the names of domain the ESXi host's FULL name, i.e. settings of IP of the server vCenter, including its server DNS entry are correct? Are you able to connect hosts using their IP addresses, just to test if it works.

  André

• PC Crash Recovery - tag, category, and other files

  I had to rebuild my PC due to viruses and other issues to get rid of the virus.

  I did much of the backup computer and hope that I have included some of the files Photoshop Elements 9 I need.

  Can anyone help me with information on where to find files that contain tags, categories, albums and other items that I created in the Organizer to help manage my photos?

  I want to make sure that these files are backed up regularly.

  Also if you know how to install these files after you reinstall PSE it would be useful also.

  Kind regards

  Amby N

  Find your backup for

  *.pse9db

  and restore all of the folder that contains this file (including subdirectories).

  You can restore this directory on any place, and in the Organizer, use the file... Catalogue... Custom location to navigate to the location of this directory to use its catalog.

  This is the system that I use for my data files: since I have several programs that use their own databases, I have created the following directory

  C:\Data

  and subdirectories under it for each program.  For example, I have a

  C:\Data\PSE Organizer\Catalogs\Test01

  Directory for my catalogue "Test01" and so on.  It is so easy to use WinZip to compress just to the top of all the C:\Data directory to create a backup file of all the data for all my programs.

  Ken

• Oracle Instance crashes during the allocation of channels using the Oracle database backup Service

  I am running Oracle Version 11.2.0.3 on a 64 bit Windows Server 2008 SP 2 OS.  Today when I tried to allocate a channel for 'SBT_TAPE' my instance has crashed.  Everyone knows this?

  Set ORACLE_HOME=D:\app\oracle\product\11.2.0\dbhome_1\

  Set ORACLE_SID = CNFCRAC1

  Set SBT_LIBRARY=D:\app\oracle\product\11.2.0\dbhome_1\BIN\oraopc.dll

  Set OPC_PFILE=D:\app\oracle\product\11.2.0\dbhome_1\database\opccnfcrac1.ora

  RMAN > Connect target

  RMAN > run {}

  allocate channel t1 'SBT_TAPE' device type

  PARMS ' SBT_LIBRARY=D:\app\oracle\product\11.2.0\dbhome_1\BIN\oraopc.dll, ENV=OPC_PFILE=D:\app\oracle\product\11.2.0\dbhome_1\database\opccnfcrac1.ora)';

  }

  Windows Event Viewer:

  The failing application name: ORACLE. EXE, version 11.2.0.3

  Module failed name: oraopc.dll, version 12.1.0.0

  Exception code: 0xc0000005

  Offset: 0x00000000000249af

  ID of the process failed: 0 x 1510

  Failed application start tiem: 0x01d0eb098ecd2d2f

  The failing application path: d:\app\oracle\product\11.2.0\dbhome_1\bin\ORACLE. EXE

  Flaws Path E-mail: D:\app\oracle\product\11.2.0\dbhome_1\BIN\oraopc.dll

  I made sure that the PATH environment variable has the following entry.  D:\app\oracle\product\11.2.0\dbhome_1\BIN

  RAC1 Table of contents alerts journal:

  Fri Sep 11 09:04:23 2015

  Thread 1 Advanced to record the sequence 11277 (switch LGWR)

  Currently Journal # 3 seq # 11277 mem # 0: +REDO/cnfcrac/onlinelog/group_3.258.824214591

  Fri Sep 11 09:04:31 2015

  Archived journal 23067 extra for each sequence 1 11276 0x82a6e611 dest ID thread entry 1:

  Fri Sep 11 09:06:20 2015

  Reconfiguration began (old Inc. 16, new Inc. 18)

  List of instances:

  1 (myinst: 1)

  Fri Sep 11 09:06:44 2015

  Global Resource Directory frozen

  * death detected instance - invalid domain 0 = TRUE

  Restored communication channels

  Diffuse master hash resource bitmaps

  Blocks of non-local process cleaned

  Fri Sep 11 09:06:44 2015

  LMS 0: GCS shadows cancelled 0 1 closed, 0 Xw survived

  Fri Sep 11 09:06:44 2015

  Shadows GCS LMS 1: 1 cancelled, 1 closed, 0 Xw survived

  Set of master node info

  Subject to all requests for remote enqueue

  DWN-cvts replayed, questionable VALBLKs

  All enqueues grant awarded

  Post SMON start 1 IR pass

  Fri Sep 11 09:06:46 2015

  Instance recovery: looking for dead threads

  Beginning of thread 1 instance recovery

  Subject to all requests for remote-cache GCS

  Post SMON start 1 IR pass

  Fix write in SCM resources

  Contents of the journal of alerts 2 RAC

  Fri Sep 11 08:57:47 2015

  Archived journal 23064 extra for each sequence 2 11793 0x82a6e611 dest ID thread entry 1:

  Fri Sep 11 09:06:42 2015

  Starting ORACLE instance (normal)

  LICENSE_MAX_SESSION = 0

  LICENSE_SESSIONS_WARNING = 0

  Monitoring of normal startup parameters... I looked in the CRS, ORAAGENT, OCTSSD, and CRSD marbles, but I can't find anything that stands out as to what caused the end of abnomal, another of the communication between the two bodies has not responded within the specified time.

  -Jen

  Hi Jen,

  There is a known issue with Windows module. We are working on fixing it and the new module should be available soon. I'll update as soon as we release the fixed module.

  Sridhar

• Audition CC 2015 crashes at startup (win 10 64-bit)

  Since I've upgraded to Windows 10 I can't run Audition CC 2015 (although it's been a while since I ran hearing so I'm not quite sure it was at the beginning of the question).  As soon as I start the application it is inadmissible, then displays the error "Adobe Audition CC 2015.1 has stopped working."

  I tried to use compatibility mode, run as administrator, logging in as a different user, delete the % APPDATA%\Adobe\Audtion, reinstalled the application, reinstalled all creative Cloud applications, run AdobeCreativeCloudCleanerTool.exe and updated drivers audio - all without success.

  Finally, I found out now button SHIFT DOWN when starting the application to work around the settings and it worked - I can enter the application and move.  Then, I tell myself that it is a matter of preference, so I try to go to the preferences, but whenever I do that, I get the error "hearing has encountered a fatal error and needs to stop.  Cannot find the directory of shared documents. "I tried looking online for help with this error in regarding the hearing or any Adobe applications for this and have drawn a blank.

  I guess it's to talk about the user's documents directory, but if that's the case I don't know what the problem is because Windows and other programs are OK.  All other applications CC are working well - it's just hearing that is having a problem.  Please find below the hearing journal file.  Any help will be greatly appreciated.

  Logfile created: 12/11/2015-22:47:36

  ------------------------------------------

  Ticks = 15 < 7196 > < AuLog.Startup > < 5 > Application: hearing

  Ticks = 15 < 7196 > < AuLog.Startup > < 5 > Version 8.1.0

  Ticks = 15 < 7196 > < AuLog.Startup > < 5 > Build: 162

  Ticks = 609 < 7196 > < AuLog.Startup > < 5 > AuUI initialization sequence began...

  Ticks = 609 < 7196 > < AuLog.Startup > < 5 > initialization Crash Recovery

  Ticks = 609 < 7196 > < AuLog.Startup > < 5 > previous incident detected!

  Ticks = 4218 < 7196 > < AuLog.Startup > < 5 > dvaaudiodsp initialization

  Ticks = 4234 initialization < 7196 > < AuLog.Startup > < 5 > AuMediaCoreSupport

  Ticks = 4234 < 7196 > < MediaCoreInitializer > < 5 > initialization of the PRM

  Ticks = 4250 initialization < 7196 > < ASLFoundationInitializer > < 5 > ASLFoundation

  Ticks = 4250 initialization < 7196 > < RegistrationServerInitializer > < 5 > RegistrationServer

  Ticks = 4250 < 7196 > < BackendInitializer > < 5 > Backend initialization

  Ticks = 4375 < 7196 > < DynamicLink > < 5 > try to launch dynamiclinkmanager

  Ticks = 4375 < 7196 > < DynamicLink > < 5 > C:\Program Files\Adobe\Adobe Audition 2015\32\dynamiclinkmanager.exe CC

  Ticks = 4812 initialization < 7196 > < MediaLayerInitializer > < 5 > SweetPeaSupport

  Ticks = 4812 initialization < 7196 > < MediaLayerInitializer > < 5 > ImporterHost

  Ticks = 4812 initialization < 7196 > < MediaLayerInitializer > < 5 > VideoRenderer

  Ticks = 4812 initialization < 7196 > < MediaLayerInitializer > < 5 > PluginSupport

  Ticks = 4828 < 7196 > < MediaLayerInitializer > < 5 > plugin Cache clearing

  Ticks = 5031 initialization < 7196 > < MediaLayerInitializer > < 5 > DynamicLinkMedia

  Ticks = 5031 initialization < 7196 > < DisplaySurfaceInitializer > < 5 > DisplaySurface

  Ticks = 5046 7196 < AuBackEnd > < AuLog.Startup > < 5 > initialization

  Ticks = 5156 < 7196 > < Wasapi boot > < time 5 > = second 0,0289215

  Ticks = 5156 boot < 7196 > < AuLog.Startup > < 5 > AuApplication

  Ticks = 5156 < 7196 > < AuLog.Startup > < 5 > AuApplication initialization sequence began...

  Ticks = 5156 < 7196 > < AuLog.Startup > < 5 > initialization XML Loader

  Ticks = 5156 < 7196 > < AuLog.Startup > < 5 > initialization of the settings of the Application

  Ticks = 5156 < 7196 > < AuLog.Startup > < 5 > Intializing dva unit test and console

  Ticks = 5156 < 7196 > < AuLog.Startup > < 5 > Audio device initialization

  Ticks = 5281 < 7196 > < AuLog.Startup > < 5 > initialization system XMP

  Ticks = 5281 < 7196 > < AuLog.Startup > < 5 > AMIO host initialization

  Ticks = 5281 < 7196 > < AuLog.Startup > < 5 > AMIO host initialization sequence began...

  Ticks = 5328 < 7196 > < AuLog.Startup > < 5 > AMIO full host initialization sequence.

  Ticks = 5343 < 7196 > < AuLog.Startup > < 5 > host Session initialization sequence began...

  Ticks = 5375 host < 7196 Session initialization sequence > < AuLog.Startup > < 5 > full.

  Ticks = 5375 < 7196 > < AuLog.Startup > < 5 > Clipboard Manager initialization

  Ticks = 5375 < 7196 > < AuLog.Startup > < 5 > Preset Manager initialization

  Ticks = 5468 < 7196 > < AuLog.Startup > < 5 > Favorites Manager initialization

  Ticks = 5500 < 7196 > < AuLog.Startup > < 5 > Manager initialization of automatic backup

  Ticks = 5500 < 7196 > < AuLog.Startup > < 5 > AuApplication initialization sequence completes.

  Ticks = 5500 boot < 7196 > < AuLog.Startup > < 5 > AuCEPSupport

  Ticks = 5515 AsyncQueueManager < 7196 > < AuLog.Startup > < 5 > initialization

  Ticks = 5515 7196 < AuUI > < AuLog.Startup > < 5 > initialization

  Ticks = 5531 < 7196 > < AuLog.Startup > < 5 > set up temporary directories

  Ticks = 5578 < 7196 > < AuLog.Startup > < 5 > AuUI initialization sequence completes.

  Ticks = 6875 7196 < AuScripting > < AuLog.Startup > < 5 > initialization

  Ticks = 6890 initialization < 7196 > < AuLog.Startup > < 5 > AuCEPSupport

  Ticks = 7093 < 7196 > < AppStateChanged > < 5 > State = 1

  Ticks = 7171 < 7196 > < AppStateChanged > < 5 > State = 2

  Ticks = 13187 < 7196 > < AuLog.Error > < 5 > Unhandled exception caught in aui:ErrorManager::ExecuteFunctionWithTopLevelExceptionHandler()

  Ticks = 13187 < 7196 > < Assert > < 0 > Debug Assert failed!

  Ticks = 13187 < 7196 > < Assert > < 0 > could not find the directory of shared documents.

  Expression: false

  Process: Adobe Audition CC.exe

  Process ID: 1228

  Thread ID: 7196

  Name of thread:

  File:...... \Application\private\ErrorManager.cpp

  Online: 152

  Function: aui: 'anonymous namespace': UnhandledException

  Ticks = 13968 < 7196 > < Assert > < 0 > aui::Initializer:Terminate

  _unDNameEx

  _BuildCatchObjectHelper

  RtlCaptureContext

  AUI::UpdateTimer:terminate

  AUI::initializer:terminate

  _unDNameEx

  _BuildCatchObjectHelper

  RtlCaptureContext

  AUI::UpdateTimer:terminate

  dvaui::UI:OS_Window:StaticOSWindowWndProc

  DispatchMessageW

  DispatchMessageW

  Exo::app:OS_AppBase:PumpMessage

  Exo::app:OS_AppBase:RunEventLoop

  AudWinMain

  ??? < 4208349 >

  ??? < 4210133 >

  BaseThreadInitThunk

  RtlUserThreadStart

  Ticks = 20781, 7196 > < AppStateChanged > < 5 > State = 3

  Ticks = 20984 < 7196 > < AppStateChanged > < 5 > State = 4

  Ticks = 22828 closing < 7196 > < DisplaySurfaceInitializer > < 5 > DisplaySurface

  Ticks = 22828 closing < 7196 > < MediaLayerInitializer > < 5 > MediaLayer

  Ticks = 22828 closing < 7196 > < MediaLayerInitializer > < 5 > DynamicLinkMedia

  Ticks = 22828 closing < 7196 > < MediaLayerInitializer > < 5 > PluginSupport

  Ticks = 22828 closing < 7196 > < MediaLayerInitializer > < 5 > VideoRenderer

  Ticks = 22828 closing < 7196 > < MediaLayerInitializer > < 5 > ImporterHost

  Ticks = 22828 closing < 7196 > < MediaLayerInitializer > < 5 > SweetPeaSupport

  Ticks = 22843 Backend < 7196 > < BackendInitializer > < 5 > termination

  Ticks = 22859 closing < 7196 > < ASLFoundationInitializer > < 5 > ASLFoundation

  Even with the help of the support team, I couldn't go to the bottom of it.  I couldn't waste any more time on it then I finally restored Windows to a facility clean and reinstalled hearing - who worked.  Probably not the answer you wanted to hear...