Behind closed doors when the fan comes on (HP Pavilion G6)

Similar Questions

• I have to use the lens correction in lightroom 5 if I activated behind closed doors?

  Do I have to use the lens correction in Lightroom 5 develop module there I activated behind closed doors? (Canon 5 3)

  Your camera (if on) lens correction in JPEG format, will not apply for RAW files. Clearly, you don't want to apply twice.

  John

• The speakers click when the fan starts and stops Equium A100-147

  I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

  Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

  In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

  Thank you for reading.

  Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
  Then worry about don t, I think its OK.

  The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
  Also an Antivirus applications could extend the startup procedure.

  You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

  It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

• VBA Project Password dialog box indicated after closing Excel when Acrobat PDFMaker COM Addin is sound

  VBA Project Password dialog box shown after closing Excel when Acrobat PDFMaker COM Addin is enabled

  I have developed many applications in different environments (ASP, SQL, VBA, VB, etc.) of the past 20 years. Recently I've had reports about a bug that I believe that the derivative of a com add-in called "Acrobat PDFMaker Office COM Addin" (PDFMaker.OfficeAddin) developed by Adobe.

  The application that generates the problem rests in Excel. There a Userform with a ListBox in it. The position of the listbox is different depending on several parameters and is changed programmatically. However, whenever the UserForm has proved and the user closes the file of the VBA project password dialog box appears. The pop up password must be cancelled 2 - 5 times before it disappears.

  The problem of course is very annoying and difficult to explain to the customers who paid me for the solution. I spent a lot of time trying to solve the problem, but with little success.

  Recently, I read in a forum that it was caused by the Acrobat PDFMaker COM Addin. I couldn't believe it, but when I disabled the add-in everything works correctly. In addition, in machines that does not add-in installed there is no problems reported.

  pens-after-closing-the-Excel-workbook http://www.excelguru.ca/forums/showthread.php?1009-quot-VBA-Project-Password-quot-Window-o

  How to reproduce the BUG (5 minutes) (Courtesy Randall):

  To reproduce this bug anyone can just create a new workbook for MacroEnabled, 1) adds a UserForm with a close button, 2) protect the VBProject code (this is essential), 3) add code to load or. View the UserForm in the WB or Activate open procedure, 4) add Userform code change of ownership (for example. High =. Left =. (Caption =) in the Userform Init procedure (this is essential), 5) save and close the workbook. (6) revive the workbook by ensuring that the UserForm is opened and then close it via the button you have provided on the UserForm. (7) exit the WB via the file Menu option - leave (this is essential). Wait, wait what he (about 5 seconds) :-) invited password VBProject to appear, repeatable.

  As a solution, I tried to disable the add-in at startup, but the line Application. ComAddIns("PDFMaker.OfficeAddin ") . Connect = False

  will throw an error "This add-in is installed for all users on this computer and may only be connected or disconnected by an administrator."

  I read in some forum that the issue occurs if the ActiveX DLL does not correctly release the reference to the workbook that contains the VBA project protected by password (http://support.microsoft.com/kb/280454)

  Any help to solve the problem or find a workaround is very appreciated.

  Niklas

  Hi Niklas,

  The above question has been saved as a Bug and has been corrected in Acrobat 11.0.1 update.

• When I turn on the pc. the fan comes power, but not start

  When I turn on the pc. the fan turns on for food and I see it on the heatsink to the processor, but it does not go beyond the orange light on the power switch...

  It seems that the switch does not work, but in the past, when I turn on the pc, it starts without pressing this button.

  Don't you think that it is a bad switch or a bad power supply. I'm not even stand up to any guest system or start

  Hello

  Thank you for your help.

  Its always a good day when you will learn something new.

  I have removed the CMOS battery for a few hours and replaced by a new.

  The PC started as usual

  I guess that the boat will have to wait a little longer for a new anchor point

  Thanks again

  Ed

• Satellite M35X-S149: no boot, cs blue light and the fan comes but nothing else.

  I have a * TOSHIBA SATELLITE M35X-S149 * that does not start.
  The blue power light and fan comes on +(fan ran for 5 seconds and stop) +, nothing else.

  Yes, the RAM modules must be verified.
  I remember that one of my friends had a very similar question.
  The power led was ONE and after pressing the power button, the cooling modules was audible for several seconds. But the phone didn t initialize and nothing was visible on the screen.

  Finally, we found that one of the RAM modules was dead
  After the replacement, that everything worked perfectly!

• Need to disable closed captioning when the play bar is hidden

  Hello.

  I've almost finished with a school project for my certification ID but have a problem.  I use buttons to navigate in the lesson, but I have a section where the learner has to see a demo.  I have the PlayBar hidden on button slides but show on the slides in demo so the learner can pause the demonstration if necessary.  I also added closed captioning so that the learner can read text if a hearing or there is a problem with the audio.

  Everthing works fine except when the demo is completed, the PlayBar is hidden in the next screen, but if the learner has turned on captioning, the CC shows text box again.  Is anyway to automatically turn off captioning after the last slide in the show?

  Thank you

  The f

  

  There is a system variable called cpCmndCC that you can switch from 1 to 0 using advanced Actions (slide enter) to turn off the CC box.

• replace the fan on 20-b013w Pavilion

  I have went through all the suggestions to appease the fan, now I have to replace it. Anyone know

  to do this?

  You can delete your personal "stuff", re - install the operating system and send it back.  OR

  You can try to do. What I'm saying now you is not political, and I do not suggest.

  How to get into the case and search for fan http://h10032.www1.hp.com/ctg/Manual/c03598525.pdf bindings

  The only reference is a http://partsurfer.hp.com/Search.aspx?SearchText=H3Z14AA CPU fan

  # 691593 001, as seen here, the fan is for your Visual recognition only. Please rate it. http://www.eBay.com/ITM/HP-691593-001-genuine-envy-23-system-fan-genuine-system-fan-HP-envy-23-AI-/181127595129

• How to clean the fans on my HP Pavilion MS227 all-in-One

  I need to blow the dust out of my fans on my HP Pavilion MS227 all-in-One. This model has no trick, I can't find anything on the web to explain how to get to the fans so I can clean the dust.

  Hello

  Your AIO PC is only a 95 Watt system.  The best you can do is to use a can of compressed air and blow air through the upper and lower holes.  I doubt that your willing AIO with a fan and if there is a there is not a service procedure.

• The camera moves behind closed doors of layer

  Hey why the movement of the camera used to

  camera layer? I put all other layers to 3d. But when I try to move

  It around as points of interest and other things, it does not move!

  
  of course, I used keyframe etc.

  I am really not you, but I would hazard a guess that you are simply not your scene through the camera, but rather use an other views? Make sure that the composition window is set to Active Caméra or everything that you have defined in your camera scene.

  Mylenium

• Firefox restore closed tabs when the value "show my home page".

  I put the option when Firefox starts: "show my home page". I expect to get a tab open, showing my home page. Instead, I get a bunch of tabs that were open when I closed Firefox during reconfiguration. This includes my home page under the first tab - but maybe it's because that's how things were when you saved the info. I was reconfiguration because I just updated Zone Alarm and, as usual, he fiddled with my settings. (Grrr!)

  Found the answer. About: config, browser.startup.homepage had all the tabs that I was getting, not only the page I requested. I put it by clicking on 'current use' from the relevant Panel. Fixed by changing the string for browser.startup.homepage, he likely could be fixed by closing unwanted and then put tabs in homepage again.

• My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

  Hello can anyone give solution to my problem.

  my iPhone touch 5 works not when it is in locked mode and it's time all incoming call came the touch works do not. other times, the touch works normally wat is the problem. ?

  If you disturb not activated. Settings > do not disturb.

• When the surface comes out?

  any ideas?

  Hello

  So far the Microsoft Community (formerly answers) has no connection with
  the Surface or can provide any support.

  You should check on the surface and Microsoft direct pro site.

  Microsoft - Surface
  http://www.Microsoft.com/surface/en/us/default.aspx

  Microsoft - contact us
  http://support.Microsoft.com/contactus/

  Hands on: Microsoft Surface tablet review
  http://www.TechRadar.com/us/reviews/PC-Mac/tablets/Microsoft-surface-Tablet-1085839/review

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Working with captioning software.  The timecode for the legends do not match when the legends come on the screen.

  The project is 2 hours long.  2 minutes in, I have a title that has a point IN that does not match the timecode of when it actually appears on the screen.  Help, please. Cat was useless.

  Figured it out.  All legends must be a second long and if the legend that the above is long, that space will be hang in the following legend, not a second, creating a gap between the LeRiz legends.

• NEF files - cannot open bridge or PS CS3 but can see behind closed doors

  Don't know if I'm in the right forum... first time here.

  I'm shooting today the floods in Brisbane, Australia and was taken with a Nikon D200 and with a Nikon D3.

  I transferred the D200 NEF files easily (as I usually do) to bridge, but suddenly I am having problems with the transfer of the NAVE files shot on the D3. They appear as files in Bridge, but if I try to open them in the PS, the error message is "could not complete your request because it is not the right kind of document.

  I've been with success of shooting on the D3 and using the same card less than a week ago. The only difference is that I transfer to another office, not my laptop, I have now. I recently rebuilt my laptop after a major accident, so maybe there is a simple setting I need to change.  But it's weird that I can successfully transfer and open NAVE today drop shot on the D200.

  Any help/tips would be great!

  See you soon

  Marc

  Make sure you've reinstalled the latest version of Camera Raw CS3-compatible (i.e. Camera Raw 4.6)