Best way to edit a JPG file in Photoshop while minimizing loss of quality?

Similar Questions

• What is the best way to make a PDF file several Photoshop images, while maintaining editable layers?

  What is the best way to make a PDF file several Photoshop images, while retaining the layers in editable for later use mode? I tried to do in Acrobat, but it does not keep separate layers. I also tried to automate the PDF presentation in Photoshop, but it combines the layers as well. I need to enable layers from photoshop retain their ability to be edited.

  It is not possible at this time, Photoshop is not a page layout program and pdf is hardly a format suitable to hold several files psd layered or editable page layouts.

  Why would you do that anyway?

• What is the best way to retrieve deleted mp3 files? I am running OSX Leopard 10.5.8 on a PowerPC G5 tower. I'll be very grateful for any help in this matter. Thanks to Chris

  Hello

  What is the best way to retrieve deleted mp3 files? I had a lapse of attention and I deleted a folder containing most of my music files. It is for the most part, the mp3 but there was regular audio files and some wav files in there also. I am running OSX Leopard 10.5.8 on a PowerPC G5 tower. I have another PPC machine to help the recovery, if I need, but at the moment, he is not appearing on my network (3 computers). I'm trying to change this soon. I'll be really grateful for any help in this matter.

  Thanks to Chris

  If you emptied the Recycle Bin after you move the folder to the trash, and you don't have a time Machine or another backup, then it is lost, sorry.

• What is the best way to read this binary file?

  I wrote a program that acquires data from a card DAQmx and he writes on a binary file (attached file and photo). The data I'm acquisition comes 2.5ms, 8-channel / s for at least 5 seconds. What is the best way to read this binary file, knowing that:

  -I'll need it also on the graphic (after acquisition)

  -J' I need also to see these values and use them later in Matlab.

  I tried the 'chain of array to worksheet', but LabView goes out of memory (even if I don't use all 8 channels, but only 1).

  LabView 8.6

  I think that access to data is just as fast, what happens to a TDMS file which is an index generated in the TDMS file that says 'the byte positions xxxx data written yyyy' which is the only overload for TDMS files as far as I know.

  We never had issues with data storage. Data acquisition, analysis and storage with > 500 kech. / s, the questions you get are normally most of the time a result of bad programming styles.

  Tone

• What is the best way to clean all the files of the user of a PC under Win98?

  What IS THE BEST WAY to CLEAN ALL USER FILES FROM A PC the wIN98

  Hi Col BROWN,

  Please see the following article on how to perform a clean install:

  http://support.Microsoft.com/kb/221829

  In addition, for more information, please see the following article:

  http://support.Microsoft.com/kb/835826

  I hope this helps!

• I recently bought a computer build-yourself. My question is what is the best way to mirror or save files on the two hard disks at the same time?

  Hello community,

  I recently bought a computer build-yourself.
  My question is what is the best way to mirror or save files on the two hard disks at the same time?
  I know there is a way in diskmgmt.msc, but I can't seem to make it work.
  Spec:
  Windows 7 Professional 64 bit
  8 GB ram ddr3
  2 x 1 TB hard drive

  On Saturday, 22 September 2012 00:53:18 + 0000, kevin.coe wrote:

  As I said, I think it's not only not a good idea, I think it's a very

  a poor man. Backup should be stored outside the computer content. Or
  use a service like Carbonite Online backup.

  Ken Blake, Microsoft MVP

  What is raid? A large number of people I know use raids.

  RAID 1 (mirroring) is not a backup solution. RAID 1 uses two or
  Several readers, each one duplicate of the other, to provide redundancy,
  no backup. It is used in situations (almost always inside)
  companies, not in homes) where any city cannot be tolerated.
  because the way it works is that if a disk fails the other takes
  more seamlessly.

  Although some people thing of RAID 1 as a backup technique, it is
  what it is, because it is subject to a simultaneous loss of the
  original and many of the main dangers facing the mirror
  your data - serious power, close to the lightning seeds, virus
  attacks, stolen computer, etc. Most companies that use RAID 1
  also have a solid plan of external backup in place.

  "Why the RAID is (usually) a Terrible idea".
  http://www.pugetsystems.com/articles?&ID=29
  Ken Blake, Microsoft MVP

• What is the best way to edit photos?

  What is the best way to edit photos?

  Hi tj_ii,

  That depends entirely on your workflow and the type of installation you are willing to do on your images.

  You can learn Photoshop via the tutorials here to edit your images:

  Learn Photoshop, get help and support. Adobe Photoshop CC

  Products | Photoshop | Adobe TV

  If this does not help, could you please elaborate more on your application.

• What is the best way to get a SVG file generated from After Effects?

  What is the best way to get a SVG file generated from After Effects?

  Is there a script to do this? I use the SVG file directly in my work. I did research online, but find that it has no native support of EI to achieve.

  I found some scripts online, but they convert output Adobe AE to the JSON file. Is there something similar available for the SVG file?

  Thank you

  AE makes pixels not vectors, so it's not possible.

• Cannot open JPG files in photoshop, error "could not complete your request because the file is not found.

  Cannot open JPG files in photoshop
  Has anyone ran into this problem? Photoshop worked perfectly in the past and the other day I noticed that I can't open all the jpg files in Photoshop (tried all the usual ways to circumvent the opening problem), I get the error message: "Could not complete your request because the file was not found." I know that JPGs are fine, as they open in other applications. My work-around for the moment, is to open in preview mode before and export as a PDF file, then open the PDF file in photoshop, however, this is not ideal.
  Someone at - it in the case, or have a fix
  Any help much appreciated

  Dan

  Hi Dan,.

  Please install camera Raw from following link: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Once done, open file Jpeg, you shouldn't get the error more.

  Let me know if it helps.

  Kind regards

  Tanuj

• What is the best way to edit the pixels of the layer without applying the image?

  Help, please!?

  What is the best way to change the pixels on a new layer (clone, healing, patch or selection) without applying the image? When I do that, I can't change the under layer if I make a mistake.

  Does this make any sense!

  You want to use the patch tool to put the fix on its own layer? Use sample all layers in the Options bar.

• When I convert my cr2 in jpg files in Photoshop, they're very underexposed

  I use a canon 70 d, and I have use Bridge to batch or convert them into Photoshop I the biggest losers of the edition of raw that I did and the complexion. Everyone knows about this problem? All solutions. Please, I beg you! I do portraits of people the skin tone is so very important. Why the switch tone and exposure? I can't understand this.

  You have NOT converted the Raw files in jpg in photoshop!

  You process raw files in Adobe Camera Raw (ACR)' and open them in photoshop, where you continue the treatment and finally save the image as, among other options, a jpg file.

  If your hand jpgs are underexposed, it's your fault, because - if you are satisfied with your image in Photoshop, nothing significant will change * by saving it as a jpg.

  Now, if you confuse the way a unprocessed RAW file looks when opened in ACR with underexposure, you may be surprised to learn that a RAW file looks very bad when opened. It is supposed to look that way, and you have chosen yourself...

  There is another possibility. You can use the Canon software first. I don't know about Canon (I'm jealous), but I understand that Canon has a program that treats your raw files and let the name of file - and extension - unchanged. It must be very confusing.

  * Or Lightroom.

  * Except the jpg artifacts

• It is impossible to edit a RAW file in Photoshop?

  I needed to edit an image using the tool clone in Photoshop and opens the file RAW from Lightroom to Photoshop to make the change. When I saved the image it registered as 'filename - Edit.tif' next to the RAW file. I added this image to my catalog so I could keep track of it.

  I wanted to really do was make the change to the RAW file and record by overwriting the old file RAW.

  I think that maybe it's not possible.

  Could you be there someone here tell me why the RAW file could not be modified in Photoshop. Is to ensure that the RAW file will remain original, with only changes that appear in the file of .xmp sidecar? It's beautiful and good, but just dream to ensure that it is the only way that this is possible and that the changes in Photoshop will give a new separate file to save.

  Thank you

  Ken

  I wanted to really do was make the change to the RAW file and record by overwriting the old file RAW.

  It is indeed as you found impossible.

  Could you be there someone here tell me why the RAW file could not be modified in Photoshop.

  The reason is that the RAW file is a file mosaicked with data from sensor directly to each pixel. Two of the four pixels usually have a Green filter, while 1 out of four have a red and another 1 to 4 a green pixel. The data is usually stored with 12 or 14 bits of precision for each pixel. All this is inherently incompatible with the model of pixel in a program like Photoshop. To change these files in Photoshop, you have to Demosaic three-channel RGB data complete, making them in some color space, gamma correct them, sharpness, etc. That's what ACR and Lightroom for you. If you cannot change the underlying data using Photoshop. If edit you in Photoshop, you will always create a new file.

  PS you may have noticed that edit in Photoshop creates a much larger than the original RAW format tif file. It is because of the patchwork of Bayer. You have a 12 megapixel. When shooting RAW 12 bit, this will result in a 18 MB uncompressed dataset (12MP * 12-bit /(8bits/byte) = 18 MB). Saved compressed losslesly and including a jpeg preview that gets you about 12 MB of a typical RAW file of this camera. When you return this to a 16-bit tiff file, you suddenly a full 3 x 16 = 48 bits per pixel! If this translates into a 72 MB uncompressed tiff file which probably compress to about 50% of that. More than 3 times larger than the original RAW format!

• How do I edit the original file in photoshop the muse?

  On my mac, it always opens the jpg preview. Guess I could always open previously the jpg and save it as a psd... it is a workaround that requires more time however. In this case I might just open it in ps and work on it, then update to muse.

  To the present Muse relies on the operating system to decide which application opens for a given file format. So a .jpg file to be opened in Photoshop, you will need to change the file association in the Finder. Click a .jpg file, select File: Get Info and choose Photoshop in the section 'Open with' and hit everything change. Note that this has the disadvantage that double click on a jpg file in the FInder now open it in Photoshop, which may not be what you want always.

  Having specific features 'change using Photoshop... '. «and «Change using Fireworks...» "is something that we would like to add, but have not yet obtained.

• Linux help: best way to drag-and - drop files Zip de Clip

  I want to copy music on my CD Player CD and transfer to the Clip Zip Folders. What is the easiest way to achieve this? Must the drive be mounted first? If so, what data it is necessary to install the device?

  I have Rhythmbox, but can't seem to use it to import and export files without errors about editing (/ unmounted).

  I have no experience with MP-3 players or load files of music at this point, so any help is appreciated.

  Ed

  http://lmgtfy.com/?q=CD+ripping+programs+for+Linux

• What is the best way to import only raw files in Lightroom?

  I have hundreds of files who believed and jpeg files.  The simplistic 'treat raw and JPEG as separate files"cannot remove all jpeg files that some have slightly different names than the raw (several versions of each raw file jpeg) files.  The only way I can find easily select only the raw files in a folder is to move all the non - raw files to a different directory so that Lightroom cannot see them, do the import, and then return the files to the original directory.  Needless to say it's far too much work to consider moving to Lightroom so I have to do for each of hundreds of files.  Is there an easy way to filter by file name pattern and expansion?  I read on some plug-ins that sound as if they must have worked, but so far none seem to do the trick.

  Yes, and that's what I thought. Just one question to be sure.

  You can do all this with LR and you can also copy the images from the card or the camera in your specific directory/folder or any folder you like and or create a folder at the time of the breeding and importation. All your steps are wrapped in a single process, no bouncing around a program to another.

  There is a good article on the net about how to change an import LR preset with a Notepad text editor, for the most part all you want to do.

  I had been using the app bridge Photo Downloader for the year to get images of maps to the folder of my choice, the year and place the images in subfolders by date shot with the format 02 09 (day) (month) (0209). This chain of folder is not available in LR. He wants to do something like 2016-02-09 or something like that. But I edited a "Preset" I created to make the exact record of naming (0209) and put my pictures in the folder of higher level of the year. So now if I shoot images spanning 2-3-4 days then copy and import with LR, LR creates 2-3-4 record names and place these files in the top-level of the year folder.