bike windows disabled

Similar Questions

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• part of windows disabled when I connect to hotmail at sign said? Help

  the display shows the part of windows is disabled at hotmail sign in? Help

  Hi edwardgolonka,

  · What is the exact error that you receive the error code if any?

  · What's the popup error only when you work with hotmail?

  If the problem is that with hotmail sign-in then the query would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want.

  Link: http://www.windowslivehelp.com/product.aspx?productid=1

• CD player is more for giving me the opportunity of what I want to do after inserting a cd or dvd. This happened after an update of windows disabled autorun

  the options window - when I insert a vacuum, music, or DVDs, no more rises, this occurred because of a windows update, example I insert a blank cd - a window used to come to ask me "what I want to do" with options - like opening a folder accessible in writing - how to solve this problem, I uninstalled updates which has reduced seams and installed , ealier this month 3/2011. but it still does not give me these options - it has become a major concern - especially when all I want to do is write/copy the image to a cd

  Hello

  It seems that the Autorun feature is disabled. I suggest you follow the steps mentioned in the article below.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

  If this does not work then, I suggest you do a system restore to the point when the system worked very well and see if the problem is resolved.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084/en-us

• Windows disable my graphics card. (8800 gt)

  I was about to watch a movie and I started the movie and it makes a weird noise and froze the screen. I restarted my computer. When I restarted, windows aero was disabled and my second monitor was not showing any screen. I used Device Manager to uninstall and reinstall my card 8800 graphics, thinking that was the issue, I've done several times, then I went on NVIDIAs site and downloaded the drivers from there and then use them to install and it still does not. So basically my problem is my second monitor is not working and its completely ignoring the fact that my card is installed. in Device Manager, its saying windows has disabled this device because its does not work, or something like. anybody have any ideas on what is happening on?

  The card is no longer good sitting in its slot or - more likely - it has failed and must be replaced.

• Backup Windows disabled by Acronis True Image 2011

  I discovered that the uninstallation of Acronis True Image 2011 will disable the Windows 7 backup program. The link is displayed on the Control Panel, but clicking on it does nothing. I've read elsewhere that the problem may be that Acronis mess up the registry of Windows, but I don't know how to fix this and hesitate to try. Acronis seems indifferent to the fixing of the problem - their proposed solution is that I just keep using Acronis and forget to backup Windows. I would appreciate the help.

  I would also say that this exposes a vulnerability in Windows 7. It should prevent the modification of the behavior of the windows installed programs or at least ask for permission until it is granted.

  This does not have the problem, I've identified, which is that the UNINSTALL Acronis True Image Home leaves disabled Windows backup. Fixing the problem requires the user to modify the Windows registry. Changes have now been contributed by a user and Acronis continues to refuse to address the problem. A full discussion can be found here:

  http://Forum.Acronis.com/Forum/14782

• Media Center Windows disable alert 'No TV Signal'

  I have a Windows 7 x 64 media center PC with 2 tuners Haupauge 2250 PCIex a double tuner, and a 2650 dual tuner USB w / card connected to Comcast cable.
  Two tuners work very well. The 2250 PCIex has no cable card, so it only gets clear QAM signals. Of the 2650 GETS clear time and encrypted QAM.
  I receive many NAGs "no TV signal. How can I disable this Nan? It always saves the show on which he nags.
  Is there a way to just disable all of these unnecessary NAGs?

  Hello

  You can read the following article and check:

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114/t/79859.aspx

• iCloud Windows disables the e-mail after apply

  I have iCloud 5.2 on a 10/64 bit PC Windows in MS Office 365 on a desktop with my calendars iCloud synchronized without any problem. I move to a 4 Surface Pro, also running Windows 10/64 bit PC in MS Office 365 and on this machine, I can sign in iCloud and 'calendars, Contacts and tasks' in iCloud watch Outlook grey down, but when I check and click on apply, he thinks for a few seconds, then release it. If I check and apply again, he will accept it, but if I close the window and open the settings again, it is still once unchecked. It does not appear in Outlook, but the Apple plugin is here.

  I tried to restart, reinstall and signing of entry/exit to iCloud without success. Any ideas?

  I have it exactly the same problem.  Synchronization stopped yesterday.  Went to iCloud for windows app and the box will not take and behaves exactly as described.

• Windows disabled remote access to my wireless printer

  My printer is connected wireless to the computer at home (so a 'network', I guess).  But the recent problems led me to authorize remote technicians, and apparently, as collateral damage, my printer does not print now.  At one time gave a convenience store, I found a statement that "Windows has denied access to distance", but I can't find out how to restore remote access.  Printer is now installed, and the work and watch as the default printer, with options for "start printing immediately.

  Anyone know how to force Windows to restore remote access to my computer to the printer?

  Thanks in advance

  Rich

  Hi rich,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Uninstall and reinstall the network drivers.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  For reference: printer in Windows problems

• Did an update of Windows disable the functionality of Gadgets in windows 7 because Windows 10?

  I had a calendar gadget on my Windows 7 Desktop I've used every day.  Since July 29 or 28, 2015, he is liked here, "Gadgets" in the control panel do not work, do a right-click on the desktop and choosing 'Gadgets' do not work, "Platform of Windows Gadget" under the features of windows is enabled.  That's happened?

  Internet Explorer 11 has essentially rendered unusable gadget.  Microsoft said a long time ago that she would not support is more gadgets.

  I guess that they did not base this decision on a survey of preference!

• Power Windows - disable the display - HDMI options do not save energy

  I recently bought a BenQ GL2760H has two inputs HDMI/VGA/DVI monitor.  I have a Dell with Windows 7 desktop computer that has an Intel graphics card integrated with just the outputs HDMI and VGA.  I also have a "Kill A Watt" device that tells me how many watts came out of an electronic device.  When I plug the monitor up to the computer using HDMI it uses 14 watts (I use a power saving on the monitor), but when the Windows power options of economy to turn off the monitor, even if the screen goes black, I can still see a low glow, so I know that the lights are still on.  And the monitor uses now 15 watts while displaying nothing.

  If I connect the monitor to the computer using a VGA cable then it uses 14 watts, and what power-saving options turn off the monitor it then uses 0 watts. That's what's supposed to happen.  I would use the HDMI cable, but I don't want to use no energy so that in power saving mode.

  What is a regular problem with HDMI? Or would it be a problem with the monitor or windows or chipset intel?

  Well, I answered my own question. I've updated the Intel HD Graphics driver 4600 for windows and now during options Windows power saving off the screen when connected to HDMI, energy drops to 0 Watt and oscillates between 1 and 0 watts. Not as good as watts 0 all the time with VGA, but much better that what he was doing on front HDMI I have updated the driver.

• Windows disabled button shortcut

  The "Windows key + W" shortcut to switch from one window to the other does not work on my computer (had my computer for more than two years and just discovered this utility)?  How can I activate this shortcut?  I noticed the Windows button + other keys activates some other shortcuts, but not this one.

  Where have you seen this shortcut?

  As far as I know Win-logo + tabs... show and scroll through the other windows.

  It will be winner-logo + Alt + tabs...

  CTRL + tabs... and allows to scroll the tabs open in one window.

• New update of Windows disabled my touch screen

  Hello

  My computer automatically updated to the latest Windows software, and now my touchsceen unresponsive. How can I fix? I already tried the pen and touch, but it did not work. Can you help me?

  Hello, Adam M.,.

  Thanks for the reply! I managed to fix on my own. I own a Lenovo ideapadp400 and apparently I had to unstall a few plugins of any kind. One of them was for the touch screen so that it is compatible with the update. Hope this helps others. Once again thanks for the reply!

• Windows 8.1 hangs on "preparing to configure Windows disable computer.

  Hello

  I got his machine Windows 8.1 (Toshiba Satellite Pro) for a few months now. Everything has been working fine so far.

  Yesterday, I started and got the message: "preparing to set up Windows does not shut down the computer" which, I remember, he first thing appeared when the machine is started the first time when it was new. I thought that it is weird but left it to agree with her. On his return (a few hours later) the message still displayed but the animation (small points of indirect approach) has frozen.

  I have tried rebooting several times and there same thing is happening. I tried to access safe mode (F8, SHIFT + F8, F12 keys) but nothing happens. I just get he same screen that ends by freezes.

  Any help would be greatly appreciated!

  Thank you

  John

  Thanks for your reply Ramesh.

  I actually spoke to the representatives of the technical support of the manufacturer this morning who gave me some strategies to enter the rear part (so to speak) of the system and run the troubleshooter.

  If you switch the machine slot and turn off in quick succession, after 3 or 4 repetitions, it will launch automatically in the recovery routine and thus allow access to troubleshooting tools.

  Another method was to hold down the key "zero" from the top of the keyboard (not the numeric keypad) when starting the machine.

  I guess that these methods are specific to the manufacturer of this particular machine (Toshiba) with the use of generic, but useful to know in any case.

  The problem is now resolved, but it might be useful to add the above tips to the knowledge base for future reference.

  Thanks again for your kind response.

  Kind regards

  John

• Firewall Windows disable whenever I restart my computer

  Whenever I restart my computer an apears red shield in the system tray and then I turn it on but it is still is off the next time I reboot.

  It's getting boring you need to activate it everytime I restart

  It all started when I instaled mse and I think that's the problem, but I don't know

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:

  Refer to this link and follow the instructions in the link below and check if it helps:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/firewall-turns-is-turned-off-every-time-i-restart/ae4ff582-e0ca-4BAE-A537-d89924c03fe2

  It will be useful.