BIOS Post beep continuously after the replacement of keyboard

Similar Questions

• BitLocker - encrypt - decrypt cycle after the replacement of the motherboard?

  After replacing the motherboard of your laptop with BitLocker encryption, the system requires a recovery key. Once inside, connect us to the system as long as decrypt it administrator local to turn off BitLocker and, once finished, activate BitLocker.

  This whole process of disabling and enabling BitLocker may take up to an hour to complete, during which the laptop can not be used by the user.

  Is it there anyway that we can re - initialize BitLocker, after a motherboard replacement, without all the decrypt / encrypt process?
  While the time that the system cannot be used is reduced to just a few minutes?

  Hi Dennis,

  Thanks for posting your query in Microsoft Community.

  I am afraid that you cannot re - initialize the BitLocker after the replacement of the motherboard as the TPM secure is removed or changed. A TPM Module (TPM) is a chip that is integrated into a computer. It is used to store cryptographic information, such as encryption keys. Information stored on the TPM chip may be more secure from external software attacks and physical theft. BitLocker uses the TPM module to help protect the Windows operating system and user data and to ensure that a computer is not tampered with, even if it is left unattended, lost or stolen.

  If your new motherboard does not have the required by the BitLocker TPM, you can refer to the section can I use BitLocker on an operating system without a TPM Reader? in the following article and follow the steps.

  BitLocker frequently asked Questions (FAQ) 

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows 7 Home Basic will be activated not after the replacement of the motherboard has failed

  Hello

  My cousin has a copy available from Win7 Home Basic SP1 64-bit, which is an OEM pack and geographically limited in India.
  Recently, the desktop motherboard has developed a fault and it was replaced by the seller that it was under warranty (so assuming that to be the same brand and model of origin).
  After the replacement, he receives a prompt from time to time that the version of Windows is not genuine and a new product key must be purchased which means buying a new copy of Windows altogether.
  I tried to help him with his number and did some research on the microsoft Web site. I tried reactivate using the same product key, but get the message that the hardware has changed and the same key cannot be used. I also tried to use the phone activation method - but after entering all numbers of 9 series a message is read on that there is a technical error and the appeal is terminated. (But he does not say why the version of Windows cannot be enabled)
  I came across the following post which seems to suggest that the same product key can be used as long the motherboard is replaced for a foul and the brand and the model have not changed.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/after-replacing-my-failed-motherboard-Windows-7/b547458e-a1ae-45df-AE4C-e4d191fc8e6a
  I would like to know if there is a way to validate the Windows version now. We are concerned that both the computer and the BONES are authentic copies and licensed and it is not just that we need to get a new product key. I would like to know if there is a phone number or address of Microsoft office in India or abroad with which we can express our concerns.
  Thank you

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

  Hi all, I need your help

  first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

  I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

  After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

  I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

  Thanks to you all

  Nikos

  IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

• Alienware X 51 R1 will beep continuously during the beginning upward

  Hello

  Recently, my X 51 R1 suddenly restarted in the middle of a program (windows Explorer), then it beeps continuously during startup and no image appeared on the screen.  I searched on the net for similar cases and discovered that it was perhaps because of the motherboard.  I have used it for 1 year and 8 months now. The only hardware upgrade I did changed the stock GTX 555 OEM to a reference of 660Ti Palit GTX card (December 2013).

  In order to address the issue of beep, I reinstalled my video card, then waited several minutes before turning on the machine (by the way, I put my X 51 on a vertical position).  The same thing happened again.

  After that, I reinstalled my card RAM and video then waited for several minutes.  I turned on the machine while on a horizontal, position and it started without errors.

  What can be the cause of the problem beep? If there is something wrong with my motherboard, it should no longer works, correct?  Is it advantageous to put the X-51 on a horizontal position?

  I hope someone can shed some light on this.  Thanks in advance!

  It could have been a RAM module that has not been properly installed. The position should not make a difference. The main advantage to have in a horizontal position, is that it falls as easily if the surface where it is placed moves.

• DeskJet 2546 b: Wireless print job stays in queue and poster printer offline after the upgrade to Windows 10

  I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.

  My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.

  Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.

  I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.

  

  But it's just a solution and not a solution.

  Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.

  Here is the step by step. Your printer must already be connected to your network (solid blue on printer).

  Step 1: Make sure your printer uses a manual IP address

  (1) to obtain the IP address of your printer:

  • If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
  • If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.

  (2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)

  Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.

  (3) since the network tab or section, look for a manual IP address configuration.

  

  (4) suggest an IP address or type in a new.  I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.

  5) click apply and close the web page of the printer.

  Step 2: Make the print driver using the manual IP address of the printer

  Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...

  

  1) click on the ports tab.

  (2) add the Port.

  (3) click on after the first screen, and then click new port type.

  (4) enter the IP address of the printer.

  (5) next.

  (6) select the new port.

  7) click OK.

  You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.

  Step 3: Remove print devices and install a new one.

  Need to do this to get the software back HP synchronized so you can scan.

  (1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.

  (2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).

  (3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.

  4) return to the printers and devices window and open the properties of the printer again for your printer icon.

  5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.

  (6) you have now two print devices in the window (again), but now everything should work.

  These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.

• Support continues after the withdrawal of car dock?

  I recently had the car Motorola docking station for my 2 x and I have a problem where the phone is continue to load after that I have deleted from the dock. More recently, the car Dock app will leave after the start. On this issue, I checked and it is not on the list of automatic end and remains lit when it connects to the car bluetooth system.

  Anyone have any ideas?

  Thanks in advance...

  The question disappeared completely after the update of GB. I see now the car dock notification when there was nothing before.

• Windows 7 is not activated after the replacement of the motherboard

  Hello

  I got my V570 motherboatd & cpu replaced after the masssive failure (as seen here several times in the forum) and now my win 7 is not activated... What can I do with it? I have 2 days more before it runs

  Thank you

  
  

• HP Pavilion Notebook 15-e020us: reactivation of Windows 8 after the replacement of the motherboard

  I have a client with a HP Pavilion Notebook 15-e020us. The motherboard is dead and must be replaced. It is, of course, out of warranty. I can find used/given to nine mothers online, but worry about the reactivation of Windows 8.1 once the replacement card is installed.  Can someone enlighten me on how to go about this without having to pay for a new license key?  I met the same problem with a Dell laptop and have ended up changing the license to it, making the project too costly.

  Hello

  > so sorry for what we cannot provide or be able to get this product key

  > because Hp does not provide the activation key that will be tattooed on the motherboard

  > and if you need to activate you will need to purchase a commercial version

  > and not sure of the DELL printer

  Please click on "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the 'Congratulations, Thumbs Up' at the bottom right to say 'Thank you' for helping to!

• Update will not continue after the confirmation of the loss of personal data

  Hi all

  I tried to update my Xperia X 10 mini for Android version 1.1 to 2.1 using Bridge Sony for Mac, but after checking that I understand that my personal data will be lost, the program will not continue. I can click on the "continue" button as often as I like, but nothing happens.

  Is there someone who can help out me?

  I decided to try to update my phone with computer Windows of my roommate. It worked like a charm. I haven't met any other problem during or after the update, and that's certainly what I would recommend to anyone with similar problems.

• Windows Vista after the replacement of the motherboard

  I replaced a faulty motherboard on my windows vista machine, now it tells me my copy of windows is not genuine, how can I fix this?  Original was an AMD Phenom processor, replace it with a processor Intel i3 and Council.  Once the physical exchange of has been done, he pulled upward and ran with no problems until now, about 3 weeks after the change of material.

  If the copy of Vista came with your computer (in other words, it was a copy sold OEM preinstalled on your computer) you are virtually no chance that the OEM copies are linked to the motherboard and if he dies, the copy of Windows is no longer valid.  Otherwise, you must follow the instructions for activation by telephone and explain the exchange of material and you will be assisted with the reactivation of your copy of Windows.

  "twolfert" wrote in the new message: * e-mail address is removed from the privacy... *

  I replaced a faulty motherboard on my windows vista machine, now it tells me my copy of windows is not genuine, how can I fix this? Original was an AMD Phenom processor, replace it with a processor Intel i3 and Council.  Once the physical exchange of has been done, he pulled upward and ran with no problems until now, about 3 weeks after the change of material.

• Re-Setup does not continue after the reboot during installation

  I am trying to install windows vista on my laptop for a USB DRIVE.

  1. that I start my USB drive
  2. Enter the language settings
  3. choose clean install
  4. reformat my drive
  5. Windows Installer files & then restarts
  6. I get an error indicating that some vmsraid file is missing!

  SO I think that the boot manager not continues on the installation after restart! Why the hell vista needs to restart during the installation!

  PS > before starting the whole installation procedure, I got a similar error saying a file was missing

  and just for the knowledge base: vista worked FINE until I visited a site and got a paladin antivirus and then I tried a lot of things and I saw a startup folder and in it, there are AB, records etc. AC, which I think would have been absurd so I tried to delete the thembut they wouldn't, so I renamed the startup folder and ffff. and then from then on, I got an error after a reboot! so I decided to do a clean install of vista!

  Hello shez1983,

  Yes, if you have a 3 GB of RAM on your computer and 2 sticks. You can try to remove one of the RAM stick and check if the installation goes through.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Reinstall Office 2007 on Vista after the replacement of the HD

  I am trying to reinstall Office 2007 on Vista after I replace my HDD ' cos my old one failed. When I run the installer, I get a message saying that the bootstrapper has stopped working. I got the same message on the original installation, but forgot how to solve this problem. Someone help me please

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner