Bistre using Photosmart Premium AIO

Similar Questions

• Impossible to print a Web page using photosmart premium c309a using Internet Explorer 9.

  I just installed Internet Explorer 9. Now, I can't print a Web page using my network photosmart premium c309a. I also have a Photosmart c6250 networked and I peut print for her. What gives? Am I missing something? I know that this is a known problem by searching the problem and Windows solution does not help.  I have no problem with the c309a print when I go to the internet, it's just a problem of Web page with IE9.  All/any help would be appreciated.

  HP helped me by making me install a different driver. Download and install the printer driver 6980. After installation, go to the printer properties and add a new Standard TCP/IP port and use IP address for the c309a.  I don't think I'm missing something, but I received the information from their chat support.  Then, when you want to print from IE9, choose the 6980 printer (which is actually the c309a printer).  This HP support doesn't help.  You must talk to a living person who knows something about printers.

  I hope this helps.  In fact, I switched to Mozilla Firefox as my default long ago, and it works very well with the c309a printer.  I only got this solution because I could be chatting with them on another printer and I mentioned that I could not print from IE9.

• Wireless using Photosmart 7280 AIO and Photosmart 3210 AIO USB - installation problem

  I use Windows XP sp2. The 7280 is new, so I was told HP support completely uninstall all my computer HP software, then install more software 7280, then use the menu option 'Add device' on the installation software of 7280 again to install the 3210. I have installed suceesfully 7280 software and am able to access the 7280 on my wireless LAN. However, when I use the installation of 'Add device' in the installation software, I get the dialog box 'Connect Your Device Now' (following the instructions for the installation of the USB) and when I connect the USB to my 3210 to the computer, I get the Windows Wizard 'addition of material", which is unable to locate the drivers for the 3210. The button 'Next' in the 'Connect Your Device Now' dialog box is not enabled, so I can't continue. It seems strange to me that Windows identifies the device but the HP software does not see. The 3210 is not in my list of printers in Windows.

  Even more strangely, yesterday I ran the base driver and utility download for the 3210 off the coast of the HP site after installing the 7280 software (probably shouldn't have done) and everything worked, I was able to print on both devices, however this morning when I turned on the computer I got a HP dialog box telling me that the installation failed and it can uninstall some software including all drivers 3210.

  Any suggestions? What I have to spend 2 + hours to uninstall and reinstall from the beginning again?

  Well, I think that I solved, at least as well as is possible. I just uninstalled, installed all the 3210 drivers downloaded from HP, then install the software suite full 7280. Both printers are available and print jobs, but the HP Solution Center software only allows me to access the AIO 7280, so I guess I won't be able to scan from my 3210 on my computer - I have to use the 7280 for this. I didn't install the software suite full of the 3210 - maybe that would give me two centers solutions HP (two different versions), one for the 3210 and one for the 7280...

  Incidentally, I don't have the CD 3210 - I think I have lost - so I'm dependent on the HP download page.

• Photosmart Premium Fax AIO - rejects Android Bluetooth phone queries

  I tried to send a document created by QuickOffice Pro on my printer HP Photosmart Premium Fax AIO C309a of my Samsung Android 2.3 smartphone series.  The phone finds the bluetooth printer and I select.  The application attempts to send the document to print and it fails with the error "request refused by remote device.

  I thought I could use this printer as a bluetooth device, pair it with my phone and send documents to print.  Is there anything else I need to do to make it work correctly?

  I solved my problem. It print photos, but to print documents, you must install the third-party software, printshare and then buy the Premium key for $12.95.  It does not work on my Photosmart Premium Fax AIO.

• HP Photosmart Premium C410b: printing using panoramic photo paper

  Hello

  Is anyone able to tell me how to print using A4 panoramic photo size.

  Thank you

  Hi @Silverback2,

  Welcome to the Forums of HP Support!

  I understand that you are curious how to print on A4 panoramic photo on your HP Photosmart Premium C410b printer paper. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem.

  Your printer is not designed to print on that size of paper. If you want to print on the paper, I think that a DesignJet is better suited for these types of photos.

  Specifications of printer for HP Photosmart Premium Fax all-in-One printers (C410a C410b, C410c, C410d, C410e)

  .

  Sizes and types of paper

  Paper

• HP Expert day - error installing printer Photosmart Premium Fax c410a e - AIO

  I have Photosmart Premium Fax c410a printer e - AIO. The printer is connected to my wireless network. I have correctly set up HP eprint and Google Cloud print and can't seem to send documents directly to the printer. I installed HPeprint applications and order of HP printer on my iphone and they connect to the c410 are not able to print. The control printer also analyzes the app, copies and capture page.

  My problem is to install the software of the printer on my laptop running Windows 7 32 bit. I tried to load drivers and software from the CD and HP site, but always get fatal error 3/4 by the intermediary and the restoration. I tried to install base drivers and a complete software package with the same result.  They have a PinternControl for Windows?  It requires no drivers and wireless. Here is a screenshot of the details of the error message.

  

  Hi gfountaine,

  Windows 7 and Windows Vista allows you to have multiple users share the same computer under their own individual accounts. This allows each user to have their own location on the computer where they can store their personal documents, photos, videos, saved games and other personal data. It also allows the owner of the computer assign some accounts the ability to perform administrative tasks such as installing software, while limiting the capabilities of the other user.

  This tutorial will guide you in creating a new account in Windows 7 and Windows Vista.

  1. Click the Start button. It's the small round button () in the lower left corner of your screen that has a Windows flag on it.
  2. Click on the Control Panel menu option.
  3. When Control Panel opens, you will see a screen similar to Figure 1 below.
     
     Figure 1. Windows 7 Control Panel

• HP Photosmart Premium C309 printer needs help with the iPad

  Hello

  I'm a bit confused about what printers are supported by the new AirPrint Apple via the iPad.

  I have a so-called ePrinter Wireless: HP Photosmart Premium C309g-m, which can not be found on iPad by Airprint.

  This printer is using the Airprint?

  List of HP a Photosmart Premium e - AiO (B310), but I'm not sure if it is the same printer and what vs B310 C309 printer same or different?

  If my C309 actually supported Airprint - why it doesn't work with Airprint?

  C309 is not supported - will be when it happens and how?

  concerning

  Michael Iversen

  We can always use c309g printer with the iPad. All what we need to do is install HP iPrint app iPad and use it to print as the printer must be connected wireless.

  iPrint - iPhone, iPad, iPod

  http://support.HP.com/us-en/document/c01616126

  iPrint - Windows mobile, Nokia, Android

  http://support.HP.com/us-en/document/c01931972

  About AirPrint, visit the following link for printers taken in charge from now on and how to use it:

  http://support.Apple.com/kb/HT4356

• HP Photosmart Premium C309a - LCD not working not

  I have a HP Photosmart Premium C309a AIO that print, copy and Fax perfectly except that the LCD gradually deteriorated to the point where it now seems almost completely white with virtually nothing readable, which makes this much less usable device. Can I replace the LCD screen? A replacement LCD can be ordered and replaced by a user?

  Thanks for more information on this.

  Dave Waters

  Hello @dmwaters138,.

  I would like all my best to help you with questions you have about the LCD screen on your HP Photosmart Premium all-in-One Printer.

  Unfortunately the LCD screen on the printer is not a part, you can order and replace yourself, however I have some suggestions for you to try to see if you can restore the functionality on-screen.

  You have the printer connected directly to a wall outlet or a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power
  In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
  ↑ This is not limited to the Laserjet printers.

  Please answer and let me know if this was helpful.

  

• Photosmart Premium C310: Photosmart Premium C310 impression in Yosemite

  OS: mid 2012 Macbook Pro retina, Mac OSX Yosemite, fully 10.10.2,"limited up software date / patches

  Printer: Photosmart Premium C310

  Connection type: Wireless (IP via DHCP)

  The printer started to play up. Symptoms: when I try and print on it from my Macbook Pro, it causes the printer restart. The documents are not particularly complicated. Sometimes I can print a text document a simple word, but most of the time, she causes the printer to break off and restart. He the NAGs tell me the printer stop me properly!

  However, if I try to print the same documents from my iPhone 5 w / iOS8, then all documents work fine. I also tried of 10.9.5 iMac and it print flawlessly.

  It seems to be specific to Yosemite OSX on the laptop that is causing the problem.

  I tried:

  * Wireless reset on printer

  * Full factory reset printer

  * Add & delete printers on laptop printer

  Hello @weirdbeardmt,

  Welcome to the Forums of HP Support!

  I understand that you experience problems printing from your computer Mac OS X 10.10 to your HP Photosmart Premium e-all-in-one printer C310. I would like to help you to solve this problem today. I also want to thank you for all the details that the you have included in your original post. Based on this information, I agree with you that this problem is caused by the computer Mac OS X 10.10. Can I please you follow the steps below.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system." This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Photosmart back in right now.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' because they are the same for Mac OS X 10.10 and follow the steps under the second method to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Manually load the driver:

  Please click here to download and install the package v3.0 HP printer drivers on your Apple computer your HP Photosmart without a downloadable driver for Mac OS X 10.10 because of the age of the printer manually.

  Step 5: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 6: Add the printer:

  1. click on the menu of Apple , then Preferences System.

  2. click print and scanand check if the name of your printer appears in the printer list.

  3. If your printer is already listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the minus sign (), and then delete the printer

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Make sure you have the driver HP Photosmart selected and not the AirPrint.

  

  6. click Add to add the printer to the list.

  -Source

  Once the printer has been added in, please test your machine to check that everything is working properly now.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• HP Photosmart Premium C309a: Uninstall HP Photosmart Premium C309a

  Could not parse.  Lost all the icons on the desktop for HP.  Have been able to print but nothing else.  I went back to programs and features and uninstalled everyone individually, but no mater how many times I try, the main (all-in-one driver software HP Photosmart Premium C309a 12) won't go away.  I went to the printers and deleted this screen printer, but it still lists the printer under programs and features.  Part of the sequence of uninstaller gives you the option to remove "all HP products" or "choose individual products." "  When I go where it is supposed to be a list of the programs/products hp, it is listed.  How can I get rid of the HP printer in programs and features?

  Hello @Mucho, greetings!
  
  Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

  I appreciate that you try to uninstall your C309 printer. I would like to help.

  We will try to completely uninstall the program from the printer using Microsoft Fix tool. Go to http://hp.care/2dHImNI and download the patch tool and click on 'Run' or 'Open' and then follow the steps in the program install and the resolution of problems uninstall.

  When the drivers are uninstalled, go to http://hp.care/2dTCeH1 to download and install the printer drivers.

  Let me know if that helps!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Photosmart Premium 309 a won't print black

  My Photosmart Premium 309 a printer will not print black text. Just imagined colors.

  I tried new cartridges (twice - at great expense!) head cleaning, cleaning deep head, aligning the head and tried to soak the printhead in hot water several times now and then cleaning and deep cleaning again and then yet another new series of cartridges, still no black - not a pinch!

  Would it be a mistake to electrical connection with the contacts? Or is the print head itself a goner - seems such a simple plastic device, ok electronics in contacts can be more complex, but not much to go wrong.

  I don't think I have done something to damage the print head when the occurreed first problem, but with all the plug and put back and soaking in hot water (let dry naturally) I can't guarantee that it is not damaged because, although I was careful and everything seems ok.

  I am also puzzled as to where ink is going on because the black cartridges I used trying to solve this problem have certainly been empty but the ink is not reaching the paper - looks like the blooming thing could swim ink now but it seems pretty clean!

  Any advice welcome.

  Hi @StuartG48UK,

  Welcome to the Forums of HP Support! I read your post and see that the black is not printing. I want to help you.

• HP Photosmart Premium C309a: Photosmart C309a Driver download problem in Windows 10

  I used the wizard, HPPIW.exe, to select the latest software driver full features.  At the end of the download, 100%, he noted "the download has been cancelled.  This happens repeatedly.

  Any ideas how to get the download?  I can not even use "download only" option and the driver software is not displayed.

  UPDATE meanings:

  After several attempts to update the software of the printer, HP Photosmart Premium C309a the wizard, hppiw.exe and the doctor print and scan, HPPSdr.exe, I completely uninstalled all the software of HP printer and related programs.  Finally, I ended up using the original installation CD because my copy downloaded software version 14, PS_AIO_05_C309a_Net_Full_Win_WW_140_047.exe, gave "Exit" as an installation option.

  Similarly, Setup.exe on the CD gave the same result, so I used HPZsetup.exe instead of loading the printing software.  This installed applications HP OK and provided all the features of the printer.

  However, I now have the loaded 13 version.  I wonder what will happen when updating HP chooses to try to upgrade to version 14?

• The problems of security of the data during the recycling of a HP Photosmart Premium Fax all-in-One Printer - C309a?

  Given a document photocopied with a HP Photosmart Premium Fax all-in-one printer - C309a can be recovered later from the unit?

  I want to know if it is safe to recycle this unit, which was used to print, fax, scan, and copy documents that may have sensitive data. Some articles and videos on the net, it is clear that some photocopiers are vulnerable in this regard. I appreciate any assistance with this question - thanks!

  Hello

  Reset will erase everything. Please try: turn the power off, press and hold # and 6 while and for a few seconds after turning it on.

  Kind regards.

• HP Photosmart Premium C410 will not scan

  Windows 7 operating system HP Photosmart C410 when I put a picture on the scanner face down and use the HP solution Center and click on SCAN, scan photo to file, the box that doesn't appear shows no preview and does not allow me to set up.  Everything it says to "prepare to analyze."  The printer is then his sweeping sounds and when he stops, the printer message says "Document Feeder Jam.  Reload document then restart of work. "  How can there be a jam?  I tried several times with the same result.

  Hello howdysmom.

  I understand that you are unable to scan a document using your Photosmart Premium C410. Please follow this document from HP on the paper jam, to ensure that there is no paper in your printer.

  Also, try a hard reset on your printer. Click here to complete this step. This printer must be in a direct wall, not a surge protector.

  Please send me your troubleshooting steps.