Black HP 26 ink cartridges

Similar Questions

• Black HP 802 ink cartridge is not compatible with the printer HP Deskjet 1050 - J410a [model: CH346A].

  I'm Sharjil Ahmed of Kolkata, in India and had bought theHP Deskjet 1050 All - in - One Printer - J410a [product model: CH346A] an online shopping website www.crazeal.com on December 18, 2011, where product information included that I will be provided 62 small HP black cartridge HP 62 small tri-color ink with the product. However, the box consisted of HP 61 small black ink cartridge HP 61 small tricolor ink cartridge.

  Also, I've registered my product on January 3, 2012 and found that ink cartridges that are are compatible with my printer 802 HP ink cartridge black (CH563ZZ) and bought the same, but when I tried to take a print, a message appeared that the HP 802 black ink cartridge is not compatible. That is why I contacted the service center HP of our region where I was informed that compatible with my printer cartridge is HP 61 only and the material of my printer is not compatible HP 802.

  Please help because I was not able to find HP 61 anywhere in my community.

  [Personal information]

  Hi sharjilahmed,

  802 cartridges are right for your region. If you bought the printer from one region other than the India, you will need to contact technical support, so they can help the region getting changed on the printer. Contact for the India numbers supports below.

  DeskJet, inkjet all-in-one, LaserJet, LaserJet all-in-one entry level:

  0047 200 1800, 1800 425 7737.
  0124 387 7300, 0124 234 0917

  

• HP Officejet Pro 8600 + not to recognize the new real black and yellow ink cartridge

  HP Officejet Pro 8600 +, this machine is 1 year old, just out of warranty and is not recognizing the new yellow and black cartridges HP ink. Tried the hard reset and cleaning the parts set out in other posts in this forum without success.

  Disappointing that the colored inks run low if fast even when you do BLACK only printing and now that the mahine a work stoppage at its destination.

  Any help/ideas?

  Hello

  As you have tried with the new cartridges, I think it might be a problem with the printer or the print head.

  Please call the HP Technical Support for assistance.

  If you are in US , toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on "'Accept as Solution" if it has solved your problem, if others can find. "
  I work for HP

• ink black & tricolor Carter 61: replace # 61 black & tricolor of ink cartridges for # 62

  Bought the new HP printer

  Bought the new HP printer

• I'm not able to find the black ink cartridge CH561h Hp122 near my place in Mumbai

  I'm not able to find hp122 black ink cartridge for ch561h near my position in India for my printer hp dekjet 1050 A all in one set then please let me know what other model cartridge n ° would work for my printer my hp 122 was the embarrassment. Otherwise let me know where in Mumbai 122 Hp cartridge is available or can u sell even online at my address. ?

  Hello

  The ink cartridges for the India are 802 balck ink (CH561ZZ) and 802 (CH562ZZ) color ink cartridges.

  You'll see maybe listed indformation suresupply by selecting your location and search for your printer model:

  https://h30042.www3.HP.com/SureSupply/CountryChangeSubmit.action?nav&nav#3

  Once you have the black and color ink cartridges available, contact HP support to reset your printer to accept the local cartridges for your region:

  http://WWW8.HP.com/in/en/contact-HP/phone-assist.html#section1

  Shlomi

• Not full of brand new ink cartridge

  Who I'm complaining when just yesterday, I bought the new black and color ink cartridges Traoré were meant to be good for 166 pages and color failed after only six pages of print.  Only two pages were usable.  I thought that the printer does not, but I tested it with a new cartridge and it works beautifully.

  The ink is doggone simply too expensive to not get a replacement or something like.  I tried the phone number, but apparently there is no "beings humans", able to use phones or the company will not hire any and prefers just to steal and cheat customers by selling short filled cartridges!

  What printer model? What cartrdige?  The spectacle of cartrdige vacuum or it just seems as if it were empty?

  For some like the 564 cartrdiges there are a bunch of vents which must be removed, make sure that the ventilation is clear if you type cartridge.

  The cartrdige warranty information is available here, most cartridges have a warranty of two years from the date of manufacture.

• where to buy in the ink cartridge for deskjet 2050 bought in Dubai

  I haven't bought product HP DESKJET 2050 MODEL NOJ510a no CH350C IN DUBAI AND has BEEN using CARTRIDGE No. 122.
  NOW I am in India and that no cartridge is available.
  What I'll do. Seller says computer store that is not available for Dubai.
  OTO.

  Hi Oto,

  In India, you should buy the black and color ink cartridges HP 802, then you should contact the HP support and reset the printer in your area:

  http://WWW8.HP.com/in/en/contact-HP/phone-assist.html#section1

  Be aware that resetting the printer to the India only 802 ink cartridges will be accepted by the printer unless you be able to return for another area in the future, be also well aware that this process is limited and cannot be more than 2 or 3 times for the device.

  Shlomi

• Re: Use of refilled ink cartridge

  I bought a store black ink cartridge filled with brand 61 XL to the Canada computers tonite, because they were all black HP 61 ink cartridges. It was much less expensive than a cartridge of HP to the actual address, and they swore to me it would work. They gave me a score of 99% that it would work. I installed it. Of course, my printer has detected that he was not a genuine HP cartridge, and I used it at my own risk. It installed ok. Test pages came out great. The only thing, he wouldn't tell me how much ink was in it. He also said that it was empty. If it detects an ink cartridge, a recharged and prints a test page, why don't you tell me how much ink is left?

  It is important to understand that the reloaded cartridges are always 'true' HP cartridges.  The only difference between buying a new cartridge and using a charged cartridge is the fact, that it is full.  A charged cartridge is always a HP cartridge.

  That's the problem: once your printer determines a cartridge is empty, this is recorded on the chip attached to the cartridge.  You can't change this, but you can always re - use cartridge filling it.  When a charged cartridge is placed in the printer, the printer will read the chip and tell you that the cartridge is used, etc., that you simply ignore and press ok.

  That said, you should read the previous posts regarding the reset of the printer by removing the print head holder and reinstall even, while the printer is turned on.  OR use two sets of cartridges and turn them as they run dry that elminates the need to remove the cradle from the print head.  That's what I do.  Why?  Because when you install the other cartridge instead of the one that has missed only, the printer will reset itself and run the reset cartridge procedure.  The printer will give you messages on a used cartridge, etc. but the point is that the reremplie cartridge will work fine.

  With regard to ink levels.  Understand one important fact - your printer than estimates how much ink is in a cartridge.  The printer only "sees" in the cartridge to actually know how much ink is in there.  The printer puts a message on the chip in the cartridge that the cartridge is empty and you cannot change this option.  Don't worry about the message - just keep printing until the cartridge physically comes to run out of ink and fill again.

  Some other printer manufacturers have actually provided a window on the bottom or the side of the cartridge and the printer could not see the ink level in the cartridge.  This means that when a cartridge has been filled again the 'seen' printer ink and everything was fine.  These other manufacturers were cannon and his brother.  Canon no longer uses this type printers - they did what HP - they put a chip on the cartridge, consider the level and make it harder to use reloaded cartridges.  The reason is obvious.  I don't know if the brother is still using the old method or have managed to get rid of the window in cartridges for newer printers.

  As a former owner of a cartridge filling company, I learned that printer makers should not keep changing the styles of the cartridges.  They could continue to use the same style and eliminate a lot of confusion and need a new style.  This is especially true if you use recharged cartridges because when you buy a new printer, older games, you've been filling fall into the trash.  In addition, the cartridges that come with the new printer are usually low capacity and provide fewer printed pages.  You must always change a size XL if they are available.  If XL is not available, do not buy this printer model, because your printing costs will be too high.

• Black ink cartridge will not print

  Putting in a new black ink cartridge the printer says it's there and full of new ink but when printing it don't use it. It happened the last time that I put in the black cartridge and I managed to do it finally work but don't remember what I did. Why is this happening?

  With printing black ink is not like that, there are only a few things you can try, and it looks like you did most of them. If the steps described in the following paper the link did not help, then you might make a physical print head cleaning. Bob_Headrick gave the steps to do this in the post below. If none of this does not work, you can either replace the printhead by contacting the support of HP, or you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:
  http://goo.GL/w7Hgh
  
  Troubleshooting print quality problems:
  http://goo.GL/FHypA
  
  Physical cleaning print head:
  http://goo.GL/DfroJ

• In the printer ink cartridge does not print in black on paper data

  The product name and number: e-all-in-one printer, HP Photosmart 5514 - B111h

  Operating system: Windows 7 64-bit

  Error message: no

  Changes made to your system until the problem occurred: no

  I went to copy the data on my printer and noticed the empty ink was passed out.  Changed the black print cartridge
  and now I can't print anything that has a black colour.  Replaced by a new black ink cartridge and

  Unable to copy or print everything about the color white.  Do you have all the guests on troubleshooting

  with no luck.

  Y at - it something else that can be done?  Would appreciate the help.

  Thank you

  Hello Alex,.

  You can try the following troubleshooting link:

  http://support.HP.com/us-en/document/c02914910

  In particular, solution 6 can be useful in your situation - print diagnostic print quality / check that the supplies are properly ventilated / print head cleaning.

  Hope this helps.

• HP Photosmart Plus B209A does not print black ink despite trying two separate NEW ink cartridges black

  HP Photosmart B209A more

  MAC

  No error messages but trying to align or check colors - black doesn't print at all

  No change - knew ink was low so I tried to install a new black ink cartridge - then one day later tried an another new black ink cartridge

  I tried all the techniques of "Troubleshooting" listed on the page Web - align, clean the print heads, install the new cartridges, looking for trouble with the vents, etc.  I have only used HP ink cartridges.

  Hi abruce,.

  Usually, it is a result of dried/clogged ink nozzles in the printer or the print head.

  According to some other users on the forums, you can remove the print head (use this guide if you are unsure how: http://support.hp.com/us-en/document/c01944580)

  Make sure the cartridges are removed from the print head

  Dive head in hot water, nozzles downwards. (about 1 in. of water) and leave any residue of ink to flow. This process should take about 15 minutes. Ensure that the print head is completely dried out and there is no moisture in the electrical contacts or the rest of the part.

  I hope this helps!

• HP Photosmart more B210A: black ink cartridge will not print.

  The black ink will print on my printer.  I installed new ink and cleaned the print heads.  I did a review of the printer and the ink of color appeared only.  The printer is recognizing the cartridge when I check the ink levels.  The first page after cleaning came out very faint then anything.  At first, I thought that the new black ink cartridge was defective.  So I replaced it with another new - no difference.

  The only change is that I have installed all new cartridges when all printing has become very low.

  Help, please.  Thank you.

  Fushing did not work, however, we used a demo on Utube and has not used the distlled water.  That could be the problem. The printer is about 8 years old, we decided to get a new one.  Thank you very much for your help.

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• HP Photo Smart Printer 6520 will not be printed in the new HP ink cartridge black

  Help! I have followed all the steps recommended for manufacturing and nothing.

  I even put the ink cartridge in hot water and no black ink hit my white paper once.

  I have a serial number, but I can't locate the product number to see if the printer is under warranty.

  Diagnosis of quality shows an empty box for black ink.

  My printer was printing in black before change cartridge.

  Hi @lllloljiojio

  I suggest you call the HP support by phone no matter whether in or out of warranty you may need a replacement printer.

  The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

  What is going on, I would advise against using this cartridge now that it has been soaked in water.

  Please let me know via private message which is the result of your call with HP. How to send a private Message

• Re: C510 black eStation ink cartridge work do not

  Frustrated REEEEEALLY. After screwing around all day trying to get stuff printed I sit tonight with a new black ink cartridge and it's either not all black printing or it is a pale gray. All other cartridges work. Come here, when I click on links to every possible solution nothing opens for me. Before anyone asks, this printer is about 2 or 3 years, but had BARELY BARELY BARELY served. It is connected to an HP computer that is only a few years old with exceptionally light use also. I installed the updates that were available. He printed some photos fine this am, but I'm trying to print documents has put me in such a rage today I had better just go to bed. Warranty is out, so much for spending money on a printer expensive in the hope that it would last. Hope this will be a quick solution. It's really annoying to keep buying new printers all the few years despite them get such use of the lamp

  Hi @Furbio and welcome to the Forums of HP!
  
  I'm sorry to hear you had so much trouble for your C510 to print in black, but I will certainly do my best to give a helping hand
  
  Because you mentioned that you have questions, open links of the forums, I'll have everything written here in my post, so I apologize in advance for how long this post can get!
  
  First of all, I would like you to clean the contacts on each cartridge by following the steps below taken from the document a "incompatible cartridge" or "not compatible ink cartridges" Error Message on the computer or the all-in-onefor your printer. "
  
  Follow these steps to clean the electrical contacts of the cartridge.
  1. gather the following items:
  Clean cotton pads
  Paper clean and lint to rest the cartridges on (coffee filters work well)
  2. press the power button to turn on the printer.
  3. open the cartridge access door. Lift the corner front right of the printer until it locks on the door in the full open position. Wait until the print carriage to move toward the center of the printer.
  4. press the tab on the front of the cartridge to release it, then pull it up and out to remove it from its housing.
  5 hold the cartridge by its sides with the nozzle facing up.
  6 locate the electrical contacts on the bottom of the cartridge. The electrical contacts are four small rectangles of copper metal.
  
  7 wipe the electrical contacts with a q-tip clean and dry until no debris remains on them. Make sure that no ink or debris from the smear on the transparent window next to the electrical contacts.
  8. place the cartridge on the clean and lint paper with the nozzle upward.
  9 locate the electrical contacts inside the carriage. Electrical contacts are similar to a set of four copper color placed pins to touch the electrical contacts on the cartridge.
  10. clean the electrical contacts inside the car with a clean, dry cotton swab, second.
  * Please do for each cartridge, just to be complete
  11 drag each cartridge into the slot that is appropriate until it snaps. Make sure that you insert each cartridge into the slot with the corresponding color icon.
  12. close the cartridge access door.
  
  After completing these steps cleaning cartridge, if the problem still persists, I would like to manually clean the electrical contacts on your print head (the part the cartridges sit in inside of). These measures were taken from the replacement print head for your printer paper (with a few changes to make things more clear ).
  
  Follow these steps to clean the electrical contacts on the print head and inside the printer.
  1. press the power button to turn on the printer, if it is not already selected.
  2. open the cartridge access door. The carriage moves to the center of the printer. Wait that the carriage is idle and silent before proceeding.
  3. to remove the cartridges, press the tab on the front of the cartridge, and then pull it upwards to remove it from its housing. Do this for each cartridge.
  4. to remove the print head, lift the locking on the carriage to the stop handle.
  
  5. place the print head on its side on lint cloth or absorbent paper and use a fluffy and filtered/distilled water to clean the electrical contacts inside the printer as shown below.

  
  
  6 proceed to clean the electrical contacts of the print head as well using the same materials. Just be careful not to touch the contacts with your fingers.
  
  7. once everything is dry (try not to let the printhead out for more than 10 minutes if possible) please proceed to reinsert the printhead to the printer and gently drop the locking handle to fix it up before you reinsert the cartridges and close the printer.
  
  
  When the printer is finished it is maintenance, try to print a report to see if the black is printing printer or if something has changed with the next steps in the document printing to a printer status report for your printer.

  1. In the home screen on the product control panel, press Menu () in the upper left corner. A list of menu options screens.