Black Print skip lines at random

Similar Questions

• Printer skips lines and enlarged fonts between pages based on the web.

  bold text Range of printers HP c7200 connected wireless to MacBookPro w/Lion. Using the browser Firefox to version 9.0.1. Printer prints the first page very well, then the second page starts by skipping several lines and large print. PC connected to the same printer, and printer works OK. Safari works OK, too. Solutions would be appreciated.

  Problem started before the upgrade to Mac Lion. Lion updated printer driver. The same problem. Only happens when I try to print a web page or something downloaded from a web page, like a financial spreadsheet. Non-Web-based print OK. Help. Thank you.

  I saw this happen when the Page layout on FireFox browser has been set to 80% (or probably anything less than 100%). Make sure that the setting and change it to 100% and try printing again.

• My printer is skip lines to print documents from my pc but the coppying works

  As the topic says my printer is skip lines when I try to print the document from my pc, but coppying documents while the printer is not connected to the pc works perfectly so I would appreciate your help to solve my problem.

  P.S. I tried Kaleidoscope twice but it does no effect whatsoever, I am using hp Deskjet 2050 J510 series

  This is not usually a symptom of software or programs.  If the ink levels are not accurate in the software of the printer it still would not affect the print quality of which is (the technology is unpredictable sometimes though).

  Try a hard reset of the printer, although it is still on and shut down the computer.  When all the powers on back, do a test print.  If printing still only all other lines, follow the document below from four Solution.  Solution Six shows you how to print a test page which will give you a more accurate account of the ink levels.  Once that prints, please tell me what it displays in the form of ink levels and if it shows any other signs of defects.

  -Solving print quality problems.

  If none of the suggestions has improved, how long is the USB cord and how old is it?

• HP Officejet Pro 8600 black printing/copying has vertical lines on the page. The color is fine.

  HP Officejet Pro 8600.  at 2 weeks.

  Windows XP

  Color copies/prints are very good.  Black prints/copies have vertical lines widths, ranging from top to bottom.  This occurs when it is copied to form glass or through the feeder.

  Suggestions?

  If the unit is producing lines in copies, so I suggest checking a few things. Make sure that the printer is plugged into a wall outlet directly and not in a surge protector. Additionally, make sure that the glass of the scanner (including the small strip on the left) are clean.

  Also, see the steps in the document troubleshooting located here.

• Epson Stylus printer 610 is skip lines in Word and Excel

  Original title: Epson Stylus 610

  My printer is skip lines in Word and Excel.  How can I fix it.

  Hi Don,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2 is the issue limited to the Microsoft Office application?

  3 did you do changes on the computer before the show?

  You can run the Microsoft Fixit article and check if that helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  You can also see the following article for more information:

   

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If the problem is specific to the Microsoft Office application then I would recommend posting your query in the Forums of Microsoft Office for assistance.

  Microsoft Office forums

  http://answers.Microsoft.com/en-us/Office/Forum

  Hope this information helps.

• printer of skip lines

  When printing, the machine skips lines or only prints the top part of the letters.

  Hello

  ·          What is the version of the operating system installed on your computer?

  ·          What do you see in the preview options before printing?

  Try the steps in the given below link and check if this is useful.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Also, try to change the settings of the printer and check if that helps.

  Hope that information was useful

• HP envy 5532 - poor black printing - trailed missing lines showing

  Hello

  I just bought the hp envy 5532 and found poor print quality.

  While color printing seems to be okish, black is very poor.

  I tried all the tools available via the control panel of the printer, but there are always problems with black printing.

  It's almost as if the black is missing from the lines and. For example on test prints that print a block in black, some of the block is low or striated.

  Runs all tests in diagnosis is also eating away at the ink and not started using the printer to its destination.

  Please help, I really do not want to return the printer, but will do if this is not resolved.

  Thank you

  Bobonthejob.

  Hello Bobonthejoband welcome to the Forums of HP.

  I see that you have print quality issues.  I would try to help.

  I recommend removing the cartridges and perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend later in this document on the streaks of ink fixing faded prints and other common Print quality problems

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums.

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• DeskJet D4360: why my printer prints some lines in italics?

  I recently put in a new printer cartridge and now the printer prints some lines randomly on the page in italics.  Why?  How can I fix it?

  Hi Ba-rk , thanks for getting back to me!

  I hope you had a great weekend!

  If you make a copy of something from the glass as opposed to aprint without italics, the copy comes out with italics?

  I suggest to remove the cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
  
  I recommend also to download and run the HP print and Scan doctor.

  Please hold me!

• All-in-one Photosmart HP 3310: black printing in odd rows

  Hello

  I have had this printer for almost 6 years and never had a problem with it until this last week. My impression started out as below:

  

  As you can see, the colors are fine, but black seems to be coming out in lines. As the black cartridge was almost empty, I replaced it and received the same impression. I replaced that one (just in case the cartridge was defective) and received the same impression.

  My printer is out of warranty; I tried to clean the print heads and align the printer several times over the last week and nothing has changed. In fact, every print I do has the same meaning (even thickness, same color, same type [dotted, lined, etc.], in the exact same places every time, which is interesting.

  I tried the reset of the printer (pulling on the power cord for 15 to 30 seconds, and then reconnecting), alignment and clean the print heads in the printer menu, and then on the menu in my Mac, and I tried to get the number online (here and here), but came to nothing.

  I'm currently located in the United States, in Arizona. I understand that it is an older printer, so I may end up having to replace, but I was hoping someone might have a suggestion.

  Thank you

  ~ Leslie

  Hey @TheLastDuchess,

  Welcome to the Forums of HP Support!
  
  I understand that you are having problems of black print quality when printing HP Photosmart 3310 all-in-one printer. I first want to thank you for all the details you provide me in your message. I see you've already replaced the black cartridge twice, cleaned and aligned the print head several times and reset the printer nothing helps. Unfortunately at this time, it sounds like you have a defective system of the print head. The printhead in the unit model is not replaceable part. It reads the cartridges and ink to go on the control document. If this part in case of failure to replace the entire unit would be necessary. According to all the steps that you have already tried, at the moment, you have exhausted the troubleshooting steps. I don't want you to run one more cleans away from your printhead system because it uses no ink in order to rinse the ink for cleaning system. The rule is generally, if cleans 2-3 make no difference, not to go forward with more clean as you will just waste ink.

  At that time, I suggest that you contact our Technical Support by phone team to explore additional options.

  For Arizona, HP Technical Support can be reached at the: 1800-474-6836

  Good luck and happy holidays!

• 114 the desire doesn't print all lines of text

  When you print an email (TEXT), my desire 114 printer prints all lines of text with the same quality.  Some of the lines are darker than others, some lines are barely readable or white, while some lines print only half the size of the font.  When I print a report of State printer, a few lines (like the lines 3, 6, 9 for example) do not print.

  I cleaned up, second level cleaned and aligned the printer several times without success.  Because it's consistent printing for printing when PRINTING TEXT, it almost seems like the printer receives no signal for some lines or print on paper areas.  If a JPG or image is printed, it prints in full.

  Any ideas?

  Thanks for your answer, but after all my attempts to clean the printer heads and firmly reinstall the black cartridge has solved my problem.  I think that the resettlement is actually what solved my problem because like I said in my previous post, it appeared that the printer would not print a few lines compared to others.

  Thanks again for your response.

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• L7590 Black Print Missing tapes project and Normal but no better way

  Problems with black project and print in normal mode for L7590 model CB821A.   After the printer has been turned off for about a month and then switched back, began to have horizontal bands across the exit who did not text/image, which should have been printed in black when printing in draft or Normal print quality.  Black okay impression is better quality.  "Logically the black output appears as if printed in approximately 7/8" wide sections/blocks on the page where the last 1/16 "(bottom) of each section is missing a release which should have been printed in black.  See assessment below one hatched filled printed image print black lines - i.e. the white strips between the blocks are portions of output that was not printed (but should be).  The problem occurs for the black out in draft or normal quality: the entire image without lack of bands is printed if black best quality mode is selected the problem appears only for ink black/output.  Output color (all three color cartridges) doesn't include any missing tapes for any mode of output quality (draft, normal or best).  Except where the output on the page aligns with the missing 1/16 "areas/bands, a diagnostic page is OK, print quality running print head alignment, calibration of jump line and cleaning of the printheads (several times) has no effect (fix) the printing problem.  Also to install a new Black XL cartridge does not change/fix anything.  Any idea on what to do to solve the problem?  Oh and also when making black copies of the production of documents in the printed copy of the document is lack as the black print in bands through the page at least that the best quality copy is selected.

  

  Hi Sunshyn2005,

  Thanks for the reply.  I had already seen and tried things in the link streaks of ink, fixing faded prints and other common print quality problems without any noticeable change in the sysmptoms of the problem.  Not knowing the logic of printing in detail the process, I was hesitant to assume that the problem was due to a print head (related as good) without knowing with certainty that if she could be the cause of the problem.  I had also seen the link following re manually cleaning/replacement of the print heads, etc. to:

  ""http://support.hp.com/us-en/document/c01446637 " "

  Given no other definitive solutions, I pulled the Black/Yellow Printhead, cleaned the mechanical contacts (even if they appear dirty) and reinstalled print head.  After that hard restart of the process, the printing problem looked pretty much the same, but I used the printer console to clean the print head, align the print head and calibrated the line break.  Note that focus 3 on the print quality Diagnostics printout showed areas in white/white near the arrows, but unprinted areas also appeared on each 7/8 "in the set/bottom of the full page and calibrations of previous line break had not changed was not clear if the blank spaces seen were really due to power problems line.

  In any case, I noticed in successive test prints, that no printed space has changed a little bit stable after things after replacing the print head and of cleaning and calibrate things.   After still print tests (change in volume of ink, paint, modes of quality, margins, etc) portions of unprinted line (~7/8' down the entire page) began to shrink.  After having used the services of printer to do about cleaning printhead plus 4-5, 3-4 alignments print head, line 11 or if several calibrations break line and a lot of printing of tests between the two, non-printed portions have been reduced in height for only the width of a couple very ink drops (project or normal mode; no unprinted areas in don't best way).

  Thus even if the problem persists, it has been barely perceptible.  At this point, I'll just keep feeling and see if things eventually clear up all the way.  Maybe I'll try an inexpensive refurbished printhead later if things do not completely delete (to prove it fixed / improves things before buying a new expensive).  Note that at this point sight 3 to print the print quality Diagnostics always shows a notable, but very light gap point arrows (with a magnifying glass you can see it is not completely empty, but contains scattered points of ink and the gap is only a point or two high).

  So... maybe the printing problem is actually "fixed" - at least it is enough now usable for the print project routine / normal for most cases.

  r/cover4me

• All-in-one HP Officejet Pro L6580 is skip lines

  With the Test Page to the printer or document page, my all-in-one HP Officejet Pro L6580 is now skip lines.
  * original title - move printer head *.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  and look for a manual too

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Black print cartridge registers is not on the right side of the page

  CP1215 has developed a weird problem! Recently replaced the black print cartridge (new, original HP).

  Printing a document in BLACK color, this isn't a problem. Crisp and clear impressions.

  Print the same document in color gives completely misaligned recording BLACK on the side RIGHT of the page. The side LEFT is clear!

  Printing CONFIGURATION PAGE confirms the problem. Registration of marks below on the LEFT are perfectly aligned.

  But on the lower RIGHT, all colors are aligned with the exception of black - the black line is much higher and offset printing to the right where it should be. That's why the color prints are all blurry on the right side of the page.

  Calibration several times running, check the drivers etc.

  Any help/advice is really appreciated!

  Hi Gemini02,

  Sorry about the long absence, but was busy with other stuff. More beat troubleshooting according to your last email.

  First of all, a few answers to your questions:

  1. don't know what the problem is. Don't want to start replacing immediately.

  2. all ink levels are more than 80%; Black nine.

  3. all the cartridges are original HP Black has been replaced recently, the other three provided with your printer.

  4. the paper is double-a premium, 80gr

  5 paper is set on the plain. Have you tried with the HP90 and light parameters too.

  After following your instructions of troubleshooting:

  6 printer moved closer to the wall outlet - it's a machine heavy tho!

  7 pressed & held green button. Config and supply status printed pages.

  8. print with other applications (Photoshop, Word, PowerPoint and Adobe Reader).

  Problem persisted. Registration completely to the bottom of the hand right side of the page and the worst in the lower corner straight out.

  Acts of desperation next, pure:

  9 deleted each cartridge, shaken several times on the axis horizontal and then triggered one end while decreasing the other and vice-versa several times. Replaced in the status bar.

  10. Ran HP Toolbox calibration.

  11. test print to Adobe Reader - same document as before. Substantial improvement!

  12. Repeat steps 9 and 10. Further improvement.

  13. Repeat steps 9 and 10 more. Almost no problem checking.

  14. Repeat steps 9 and 10 more. No record of the questions at all!

  Then, to avoid the location and power source:

  15. moved printer in its normal location.

  16 connected the printer to its normal power source - an extension of good quality.

  17. reprinted on the same page. No registration no questions at all.

  I have no idea why the steps 9 and 10 would have such an impact. And why repeating them would improve the print quality progressively until no problems are observable. I have detailed my action here in case they can help someone else.

  I thank very you much for the support and guidance you provided. If you have any idea why the repeated shaking and calibration solved this problem, I would be very interested! Keeping in mind I ran several times previously without success to calibration.

  Thanks again for your help.