9860 screen display problem

Similar Questions

• Screen display problem. See below for details. Impossible to get original Windows display fills it fullscreen display.

  My laptop closed spontaneously mode 256 colors and the "battery".  When I tried to turn it on again it would not respond.  I ended up using Ctrl-Alt-Del to stop it completely.  When I turned the computer back on it gave me a message on the "color mode" bubble and the screen looked "not normal."  I clicked on the bubble who said it would be 'restore' or something to that effect to the screen.  When he finished, I had a smaller screen display large icons.  Then I went into Control Panel and tried to get back to my original windows desktop and after much research, etc. have a "smaller version" of a desktop with the margins side black (approximately 1 inch wide).  I can't my screen fills the entire screen, regardless of what I do.  The option "stretch" in advanced settings is not the case.  What can I do?

  Hello Onthesea,

  Thank you for your message.  First, go to your computer manufacturer's website and download/install the latest video driver for your computer.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen / display problems

  I have a MBPR13"(early 2015) which I think has integrated graphics intel 6100.

  I've been running windows via bootcamp on the mac since I bought it, first with win8.1 and for a year or two, win10. A couple of weeks, however, windows crashed and wouldn't start. I can boot into safe mode after 3 failed attempts at normal mode, but I couldn't diagnose the problem. I took the opportunity to carry out a complete new installation of OSX and Windows 10.

  However, while OSX continues to work very well, Windows 10 still will not work. It installs successfully, and then gets to the point where the wizard Bootcamp installs all the drivers - it seems to be ok until that display then goes off - I guess that's the point where the display drivers are installed. Windows is still underway, but all I get is a white screen.

  After much mucking to plug and unplug the screens I can sometimes get an image on an external monitor or on the built-in screen. The computer screen does not fill the screen (bottom 25% of the screen remains empty) and windows cannot detect both screens at the same time. In any case, in a few seconds to lift an image on the screen, windows crashes and restarts.

  I suspect that it is a driver problem, probably related to a recent windows update - note my new installation is based on the current windows (as of today ' hui) 10 ISO download available from microsoft, so I guess this includes all applicable updates and I have no way to drive to a previous version.

  Can someone from apple what comments can you do on this point, hopefully identify that it's just a driver problem and update the bootcamp windows software support for my MBP so I can get Windows successfully facing up and running? Otherwise, any other suggestions on a fix?

  Thanks in advance

  Mike

  Updated - uninstall the display driver Intel 6100 temporarily solves the problem (of a point - the works of laptop display once again, but of course without hardware acceleration or connectivity external monitor), although 10 windows automatically reinstalls the drivers a few seconds later, resulting in the return of the issue.

  I was able to continue to use the laptop only by disabling the graphics card. However this clearly is not a solution, but simply points to the fact that the display driver is the issue.

  Everything apple comments? Surely, this affects a lot of users and not just me? Is an update to the driver on the way?

• Satellite L670D-13F 17.3 inch laptop - screen display problems

  Hello.

  I got my Satellite for nearly a year, and in recent weeks, the screen has been compromised. Turquoise/Blue thin line across something are white or tinted white. I hope it's nothing related to the virus, as I installed McAffee.

  Any ideas what this could be? Is this a known issue?

  Thank you.

  Hello

  According to your description, a thin line appears on the screen. Right?
  Well, I doubt that this issue has something to do with the software or virus
  It seems that the problem of material: I m thinking display or graphics card problem.

  Connect an external monitor to the computer and check if the same think that the line would be available on the 2nd monitor.
  If this will not appear on the external monitor then it would mean that only the internal display is affected.

• Satellite M40X Screen Display problem

  My Satellite M40X has a black vertical line which occupies 20% of the screen on the left side. The rest of the screen shows a full view. Change the display settings makes no difference, and there is no mention of this error in the manual. You don't know whether a problem with the LCD screen or a problem with the adapter and drivers. Wanted to check if someone has experienced something similar and can advise you.

  Hello

  Check using an external monitor.

  If the same vertical line would be seen on the external monitor, an internal graphics card problem may be possible
  In this case replace the defective

  Since the GPU is a part of the mobo, you need to replace the motherboard that can be a costly affair

• T61 button on-screen display problems

  Hello, I had a problem with my T61 and I was wondering if someone here could help me. My laptop recently crashed, having the blue screen on startup, what reinstall me Windows Vista again and everything. I managed to recover all my files and everything seems to be back to normal with the exception of a few things. First thing that annoys me the most is that whenever I use my volume buttons on the keyboard, the volume up and down works but does not appear in green text, as before, say what volume number. In addition, my silence affects only the volume mute but not to reactivate the volume later. As the top and down the volume buttons, shortcut keys Fn + Home and Fn + end to increase or decrease the brightness of the screen work, but do not display the text on the green screen. Another problem I have is that my blue ThinkVantage button next to the volume buttons does nothing. Finally, my biggest battery icon appearing any more in the toolbar to the left of the clock and icons of small image next to the clock. I hope that these problems can be solved through these forums and I thank very you much for your help!

  Sweet, I got it fixed. I thought I ran an update of the system already but obviously not. Thanks for your help!

• Laptop HP Pavilion dv7t after connection then blue screen display problem

  My phone displays the Windows 7 login screen very well.

  After I login, I see the desktop and icon and it flashes a couple times with a gray screen.

  Next, I get a blue screen and restart the computer.

  Any ideas?

  Hello

  The fact that it works well in Safe Mode, more points to a problem with the video chip.  Unfortunately the video card (called a card or a built-in chip) is physically soldered to the motherboard.

  That's what I would recommend.

  As you can access the safemode, make a copy of backup all your important files, etc.  Then try to reinstall the operating system or your discs recovery or Partition of HARD drive - if you still have the same problem, you could be quite certain that it is not software partner.  As I mentioned earlier, if you could possibly connect the laptop to an external display and you still get this problem, you could then be confident that the problem is with the video card - in this case, see the link below.  The page does not mention your particular model, but it can be useful in communicating with the guys.

  http://CGI.eBay.com/HP-DV2000-dv6000-DV9000-tx1000-laptop-no-video-repair-/260674058980?PT=LH_DefaultDomain_0&hash=item3cb1627ae4

  Kind regards

  DP - K

• Adobe Creative Cloud desktop screen display problem

  Does anyone have problems after the Creative Cloud Desktop () lights out after the last update?

  Check the version of the worm had to file (Adobe Desktop Service.exe) is 3.3.0.151

  

  Through the Release Notes connect you and found a cause what the problem

  When you look at the note accompanying this week

  Using creative cloud | Creative Office Cloud app | Release notes

  Version 2.3.0.151 released on 24/09/2015 This update brings considerable improvements in the installation experience: Processes which are in conflict with the installation of the products are displayed before the download starts. In addition, notifications about the contradictory processes are much more useful. Installation and download acrobat DC is improved to support already installed versions of Acrobat. If you change your subscription, the creative Office Cloud app now shows your current state of the law for each application. HiDPI support on Windows was added.<-believe this="" is="" what="" cause="" the=""> Integrity of the Adobe Service software is built into this update. Other bug fixes.

  and I can currently temperley work round the issue of disable support high DPI in the window

  

• screen display problem?

  my screen has a box in the upper left corner, more brilliant than the rest of the screen.  Troubleshooting unresponsive. Help, please

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/307960

  It will be useful.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Interference/Dell XPS 13 display screen flicker problem

  Hello

  I bought my laptop Dell XPS 13 (L321X) in December of 2012.  Starting in mid-2013, I began to experience my screen suddenly blur. I enclose a picture of what's going on. I don't think nothing of it at first, and honestly it would happen maybe once a month.  I thought that it was maybe that I had the laptop on my lap and it was be overheated.  In any case, I don't think a lot of it

  Since the beginning of this year, I saw that it started doing it more frequently.  Last month, it happened more frequently, to the point that it disrupts my use of the laptop.  I LOVE the laptop, except for this issue.  Can someone please help me understand what seems to be the problem with the display problem?

  I haven't tried the connection to the laptop to an external monitor to see if the problem is with my video player or a screen.  It's just hard to tie it to an external monitor at the time where the problem starts, because the interference goes away in 20-30 seconds.

  Hi all, I posted this message a few months ago.  I never received any positive suggestions or solving the problem, so I did what I do naturally when I'm out of options.  I reformatted my entire hard drive and re-installed windows and all the drivers from scratch.

  Pouf!  Problem gone!  Didn't happen for several months.  I guess that there is a bug in the version of the BIOS or display drivers.  I recommend others try this - it worked for me and I am in love with the XPS.

  Good luck!

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• the on-screen display is reduced when you communicate with the Bank. a ok 2 hours earlier.

  Connected to the online banking services. Screen display (using Firefox) was reduced, cannot read. Have updated to the latest Firefox. The works of banking fine online using Google. I use Firefox instead. Display earlier worked with no problem.

  Hello, try pressing ctrl + 0 ("zero") while you are on the page to restore the zoom level or where it does not browse other troubleshooting procedures common to the Web sites look bad or appear differently than they should.

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• Tecra A9 - Remove Volume on-screen display/indicator

  Hello

  I have a laptop series Tecra A9 running xp pro 32 bit and I am trying to remove the volume indicator on the screen. The laptop has a volume wheel on the edge closest to the user, and if it's on the knees, the volume knob gets hit all the time.

  Whenever it is typed, the volume on the indicator screen appears which becomes VERY annoying.

  I tried to find a way to change/edit that during a period of time and can't find anything conclusive. I was able to change some .dll and .exe files to change the picture a bit, but it has not completely solved my problem.

  I guess my questions are the following:
  1. is there a way to disable the screen display on only for the indication of volume?
  2. is there a a way to disable the wheel of scrolling shortcut to change the volume, keeping all other shortcut keys?
  3. is it possible to disable the wheel of scrolling shortcut and use a different way to change the volume. I found many other utilities to change the volume of the laptop that allow different variants of shortcut keys that I like to use instead of the scroll wheel.

  Let me know if any other information is needed.

  Any suggestion would be appreciated :)

  Maybe you could just cover the wheel with little electrical tape volume and use the command of Windows Volume to change the volume instead?