Laptop HP Pavilion dv7t after connection then blue screen display problem

Similar Questions

• When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equal

  When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equ

  . DMP files ar bellow:

  https://onedrive.live.com/?CID=BF931C2E054B2BA5&ID=BF931C2E054B2BA5%21105

  Original title: driver_irql_not_less_or_equal

  Accidents were not conclusive.

  BugCheck D1, {29, 2, 0, fffff880018b9f2a}

  Probably caused by: ndis.sys (ndis! ndisXlateReturnNetBufferListToPacket + 2 a).

  Follow-up: MachineOwner

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 0000000000000029, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
  Arg4: fffff880018b9f2a, address memory

  Debugging information:

  Update your network drivers, preferably from the support page of the manufacturer of your computer, which is strangely not available at this time. If you can't find a version update at Dell, try Realtek, linked below

  Identification information of the machine [of Smbios 2.3, DMIVersion 35, size = 2590]
  BiosVendor = Dell Inc.
  BiosVersion = A11
  BiosReleaseDate = 30/11/2006
  SystemManufacturer = Dell Inc.
  SystemProductName = OptiPlex GX520
  BaseBoardManufacturer = Dell Inc.
  BaseBoardProduct =
  BaseBoardVersion =

  OptiPlex GX520

  http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-GX520/drivers

  Note: This machine is pretty old and I see no driver support beyond Windows XP.

  Image path: \SystemRoot\system32\DRIVERS\Rtnic64.sys
  Image name: Rtnic64.sys
  Timestamp: Fri 30 mai 11:12: 23 2008 (48401957)

  Description of the driver: Realtek Ethernet NIC driver

  Driver update site: http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=10&level=3&Conn=2

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• E - 17e125nd laptop computer Pavilion bad internet connection.

  Yesterday, I bought a laptop HP Pavilion type 17-e125nd. This laptop seems to have very bad internet connection while the signal is 100%. All the time he said that some sites Web cannot be opened. After the page refreshes it does sometimes or I have to close the browser and try again. After that, the page opens sometimes well, sometimes it opens but does not completely load or load into a very strange layout.

  What can be the problem?

  Once again: the signal connection is 100%. 2 other PCs on the network have no problem at all. If its a problem with the bought new HP laptop, I'm afraid.

  Pretty strange for a new computer.

  Anyone here with the same problems? Or perhaps someone who knows how to fix this?

  Thanks in advance

  Kees

  I use a WiFi connection for all of my pc and the excists of problems in both IE and Chrome by the way

  Problem solved. I called hp and a friendly young man changed the values of the dns server and it works now.

  He has will call even me in 3 days to see if everything is still all right.

  This is what we call topservice.

  Thank you HP

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• Display driver nvlddmkm stopped responding and has recovered successfully after sleep, and then blue screen

  original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.

  Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.

  update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• HP Pavilion 500-330 Desktop PC blue screen with the cursor after the start

  I have a desktop computer Pavilion 500-330 Windows 8.1 running on a 64-bit system. The problem is after the start, a blue screen with a cursor appears, and the computer does not go to the lock screen.  I did restore, get updates and even left the only blue screen, but after many hours, he was always there.  If I do a force re-booting, the lock screen comes, but not always immediately.  There is no problem to wake up when it is in "standby".

  Any help will be appreciated.

  Hello again @padway,

  Actually, if you already did a cover of the plant on your computer the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As a recovery plant excludes any kind of software problem this is your best course at this time. A technician from the local computer or a computer repair shop may be an option if you are not in the warranty as well.

  I want to thank you for display on the HP Forums. Have a great day!

• Laptop does not not after connected

  My laptop does not respond after that I logged. It shows all icons, the cursor moves, but when I click on any icon it does not at all. And when to stop I have to press the power button / stop. Help, please. Thank you.

  Hi RAS.

  Thanks for posting the query on Microsoft Community.

  It could be due to drivers or system files corrupted or damaged. Don't worry, will help you with the question.

  You can try the steps in the link below and check if it helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes: (at the start, recent hardware or software changes, system files damaged due to hardware problems, due to malware or Antivirus software)

  https://support.Microsoft.com/en-us/KB/2681286

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  To run the above steps if you are unable to use the system, then I suggest you to place the computer in Safe Mode and the clean boot and check if you can try these steps.

  Operate the system using the safe and check. It starts with a minimal set of drivers and services.

  Start your computer in Mode safe:
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the problem is not in safe mode then try to clean boot.

  Try the system to the boot. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows. It starts Windows by using a minimal set of drivers and startup programs.
  How to perform a clean boot in Windows: http://support.microsoft.com/kb/929135

  Note: After troubleshooting, consult this "How to reset the computer to start normally after a boot minimum troubleshooting" section in the link above.

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Windows 7 will not Shutdown and then blue screens

  I got this laptop (Satellite A660-18) last week for work and after I installed all the updates of Windows 7 that it would be closed. I formatted the lot assuming that I had done something wrong and it was fine for a day and after installing the updates again, is once more show 'Shutting Down' for about 5 minutes and screening then blue.

  Help, please! There are a lot of people have reported a similar problem, but none of their solutions seem to work (ie. re-installing the BIOS).

  I am very excited to hear from someone!

  Andy

  I put t know where you found these reports, but I can confirm that my Satellite A660-13 q runs perfectly with all important updates.
  Have you installed updated optional too?

• Satellite L500-1WG WLAN WNAP A-Link connection gives 'blue screen '.

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP 3 G ROUTER via WIFI (Realtek RTL8191SE). Connection is established, but after a few seconds, I'm going to 'blue screen' and restart the laptop.

  A-Link WIFI connection works very well with my Nokia X 6 phone (S60).

  Any help?

  Sitiper

  Hello

  BSOD code, you get exactly?

  Have you tried to update the driver WLAN? You can find the latest version on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite A50-109: after RAM upgrade-&gt; blue screen

  Hi all

  I bought a new patriot 1 GB ram sodimm pc 2700 as an upgrade to my satellite a50-109. After installation of the equipment on the back of the laptop, I had some problems with windows xp bsod (blue screen of death). Errors 0x000000e8. After recording with microsoft, I had to reinstall the drivers... Can someone help me please!

  Thank you
  Alex

  It seems that you are using a module of memory without a name. These modules can malfunction. It s nothing unusual.
  So I use and always buy modules memory Kingston or Infineon brand, for example.
  I have goggled autour and actually ntfs.sys error might have something to do with the fault memory.
  It s whatever the module has been properly recognized in the BIOS. Certain areas of memory may malfunction

  In my opinion, you should check if the laptop will be functions correctly with the modules of memory recommended by Toshiba

• Office 2007 and after recent update blue screen errors

  After a recent update installed before shutdown, the Office 2007 applications will not start. An attempt is made to the installation program which translates by the display of an error box indicating that the office is not installed for this user (happens with all users). Office 2007 will not uninstall, and even attempts to repair or reinstall from the original disk fail. I tried to uninstall the update indicated and get up now a blue screen at startup. Any ideas on how to solve this problem.

  It is a problem with XP not Windows7, I changed the perameters during the validation of the request, but he always finished in the category of Windows7.

  Hello
   
  1. are you able to boot to the desktop?
  2. What is the exact error message when you run the installer?
   
  If you are not able to boot to the desktop, then you can try safe mode and check if you are able to boot to the desktop.
   
  Method 1:
   
  Follow this link provided below to start your computer in safe mode.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/?kbid=315222
   
  Method 2:
   
  If the problem persists then you can be started your computer in safe mode and run the system restore.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084
   
  If the solution provided above does not resolve the problem then try to disconnect all external devices except the mouse and keyboard and try to start your computer, and check if you are able to boot to the desktop.
  You can try this link below and check if you are able to boot to the desktop.
   
  Advanced Troubleshooting for General startup problems in Windows XP
  http://support.Microsoft.com/kb/308041
   
  Please follow the steps above and once you are able to boot to the desktop then you can visit this forum link below to get help for any office.
   
  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/threads
   
  As the Windows Update forum is common to all Windows xp, Vista and Windows 7, the message you did is indicated under Windows 7. worry not about this because the site is designed in common.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• win xp SP3 installed then blue screens at boot

  Desktop Dell, have care about me, ran an update to SP3 last night and this morning, after whenever I turn on it blue screens, can't even get into safe mode.  blue screen error IRQ less or not equal or less than or equal.

  Any advice?

  Thank you

  You can try deacclerating the video card if its not a chip, I did it on a few when I got a blue screen after service pack 3 installs, then after deacclerating graphics, get the driver for the card, it is something that I found worked, i.e. If it has an attached video card, if not, disabled ime

• Registry problems cause hard disk by clicking on, then blue screen

  Dell support said the clicking hard drive and next blue screen is caused by a registry error. In order to solve a problem of major virus and start over, I have completely reformatted the hard drive and installed the operating system and other programs, so I can't understand why I always have a registry problem.  Although I can not specify the exact moment, it seems to happen after an update of Windows, but also occurs at random.  It would also be the installation of MS Office 2010, because I do not remember what happens before the 2010 Windows Installer.  I read that registry cleaners do not work, so I am at a loss for what to do. What I don't understand is how the registry is damaged when all that I've done is install everything from scratch.  I have a Dell Dimension 5100 running Windows XP Home Edition w/SP3.

  Hi LiveToFish,

  1. What is the problem on the computer after reinstalling Windows?

  2. don't you still get the errors blue screen on the computer? If so, then what is the message on the blue screen?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then check the event viewer to determine the cause of the blue screen on the computer and post back with the details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• Windows 7 64 bit slowdown and freezing then blue screen

  I have a computer running Windows 7 64 bit. I have not stop or put back on for a few days. The next morning, I found the computer has rebooted, after I login, it restart continuously. Uncheck the box after you restart the car, he showed the blue screen crash. Likewise, it crashed on the safe mode.

  Please let me know what I can solve this problem.

  Thank you

  E long

  El

  In fact it was.  This was connected with WUSB54GCv3.sys Compact Wireless-G USB Network Adapter from Linksys.  I would completely remove this driver and install the latest driver available