Black screen on monitor E193FP

Similar Questions

• HP pavilion 22xi backlit monitor goes black screen when using

  I have

  led screen have a HP Pavilion 22xi.  It is a year and no warranty left.  He started to go to a black screen when you use it.  I have to unplug the monitor for the display.  the power light lights up but won't stop him.  I saw a few ppl having the same problem, without success to get this resolved.  I tried external monitor on another laptop and have the same problem.  I replaced the AC adapt power and also downloaded the drivers for the monitor.  It's very frustrating.  I tried to reset to factory setting, and nothing changes.  It works for a while, then all of a sudden go to black screen and I have to unplug it from the back.  Please help...

  Hello @squiggy,

  I understand that your LED HP Pavilion 22xi screen just shuts off and will not turn off. After reading your post, it seems that the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Tecra S1 - black screen even on external monitor

  Hello

  I'm not sure if this is the right thread for this, but here goes: I have a tecra s1 who was working fine then one day. I turned it on all I get a black screen. I suspect that it's the hard drive but not 100%.

  I tried to connect to an external monitor as the same just a black screen. My question is this laptop does not start if the hard drive is bad I think it would be at least got to the bios screen, but I get nothing but a black screen.

  any help would be appreciated thanks.

  Hi cracypcguy,

  For me, this looks like a hardware malfunction if on an external monitor, you can see a white screen also. In addition, I doubt it has something to do with the HARD drive. In this case you should see the screen of the BIOS at least.

  Anyway, in your case, I'll ask a maintainer approved assistance. Technicians can check your laptop parts and the exchange of defective material.

  I hope I could help you! :)

• PAVILION A6504UK (FK508AA) BLACK SCREEN on HP w1907v LCD MONITOR

  My A6504UK is 2 years old, has built-in integrated graphics Nvidia GeForce 6150 SE nForce 430 and I use the HP w1907v LCD wide screen monitor.

  Recently, the monitor was flashing to a black screen and then return to the Windows form, showing what I did previously.

  This flashing lasts for about 10 seconds and is intermittent, there is absolutely no reason or warning to what happens.

  There seems to be no breakdown in the quality of the screen, but I struggled to install the Nvidia drivers for 1440 x 900 native resolution. When the driver is installed, it does not always show the native resolution from the list of choices.

  By pressing the button Auto / Select on the monitor makes no difference either.

  I'm running Windows 7 Ultimate and it's a complete installation after the PC has been returned to factory Vista settings.

  Can someone give me a hint as to if it is the monitor or the integrated graphics card (more likely)?

  I can install a separate graphics card and disable the onboard easily graph?

  Any help or advice would be much appreciated!

  Question of likely monitor, less likely a video card problem. Can be confirmed with another monitor if you have an or try this monitor on another system. Installing a video card will automatically disable the onboard video.

• monitor gets black screen

  My monitor guard rethink a black screen when I turn on my computer, basically when I turn it on I see start for half a second, then I get the black screen while my monitor is always on

  Now, I recently built a computer, put it a few days ago the same thing happens, I didn't install anything don't not even windows 7 yet, but when I turn on the computer I get the black screen again, I can not install windows

  My brother and his friend think it is the graphics card, but when I built my new computer black screen continued to occur. If I turn my screen I can see my screen for half a second, and then it just goes black again.

  Yes I checked the cables for the monitor, I have even plugged into my laptop, and the same thing happened to the monitor

  So I was wondering... What is the cause of the problem? my brother think that theres something wrong with the new parts, I think it's the monitor that is causing the black screen and I have to buy another... What is it?

  Hello

  Since the monitor displays the same black screen after connecting to a laptop, this might be a problem with the monitor. Contact the manufacturer of the monitor on this issue.

• HP Envy 15 notebook PC C8P47AV: black screen on laptop and also when I connect to monitor

  When I turn on my laptop I can see only a black screen.  I don't quite see the HP logo.  The hard drive seems to be spinninge I can hear the fan and the lights on the wireless and the caps lock are functional; believe so everything works well except the video.  I tried to connect to a monitor via HDMI, but you still get black screen after trying the F4 key.  There is no beep codes or the upcoming diagnostic lights.  Before I lost the video, I had taken the laptop fan because there was a message that he did not work properly.  Turned out a screw was stuck in there.  I removed the screw and replace the fan in.  Everything closed and turned on the laptop - no video.  I tried to re-seating the RAM.  Basically, I would like to see if people think it's the motherboard or the video chip that is the question; in this case, I'm going to buy a new laptop because motherboard costs about $200.  Also if anyone knows if there is a diagnosis of material that I could run that might give some beep codes.  I think that Dell has something where you hold D down and power on the phone to start the diagnostics.  Full disclosure this laptop fell a few times as well, so this problem can only await the right time appear.

  @gman2,

  Hello and thanks for the display on the HP support forums.  If you can, nothing appears on the screen or enter the bios at all this means you have a hardware problem.  You will need to contact the HP support by phone for repair at this point.

  Please use the following link to connect to the appropriate service.

  Contact HP support.

  Please let me know how things are going.  Thanks again for posting and have a great day.

• monitor goes to black screen on startup.

  My monitor has started to go to the black screen at the "start". However if I it turn on and off several times, it starts to work and then that's fine. I tried to unplug all the power cables and turn on again but the problem persists.

  Hi Syed, already tried reinstalling the video card. Came to the conclusion that it was a faulty monitor. Probably a dodgy relay or a dry joint? Bought a new monitor! Problem solved!
  Thank you very much for your advice, you helped me to identify the problem.  Rob.

• my computer does not start when turned on a black screen monitor

  Computer most of the time will light up all the way and the screen remains black. If I push the power button on the monitor, you can see briefly what the screen should look like through the dark.

  What should I do to fix this?  I have Windows XP Professional

  Hi TraciLucia,

  ·         You receive an error when starting?

  ·         You see the desktop behind the black screen icons?

  Try the following.

  Method 1: Start the computer in safe mode and check the number. Report of the results.

  Method 2: Check to see if this article helps you.

  Computer stops responding with a black screen when you start Windows XP

• Monitor shows a black screen and "no sigal.

  My compaq pressario turned slowly, so used fxdisk?, but who is stuck on 74% for more than 1 hour manually off computer. but when that I start now I get a black screen and the message "no signal."

  I tried clicking on F8 nothing helps. any help to get my computer working again will be greatly appreciated.

  the main problem is the signal of monitor at the moment.   without a method to view the data on the screen there is little we can do.

  so the first initiative is: namely a signal.

  first of all, double check your wires between the monitor and the computer and make sure they are securely attached and that they are not frayed or folded.   If you have a video card on the motherboard, then disconnect the monitor to it and connect it directly to the motherboard.

  Secondly, after pressing the power button computers on the State on, try to access the bios of the computer.   wait about 3 seconds after you press the button and hold down the DELETE key, or press f10 to open the bios screen.

  If bios opens then it looks like you have a video signal from the motherboard.  You can then exit without saving the changes.

  But if you can not access the bios, then it's a problem.   Perhaps, there is a problem with the motherboard.

  so check your computer manual or online manual your computer to verify that you have taken the right steps in trying to open up the bios screen.

  second initiative: If the video signal is finally resolved, the next step will be to start with a xp installation cd.    This will bypass the faulty files on the hard drive system and allow you to run some commands in order to fix it.

• Double configuration monitor - only a monitor displays the login screen 2nd monitor is black

  Hello, I searched Hi and low and starts to believe that it is just not possible from messages of others.  But since the last time this question has been posted in 2011, I'm hoping that there was a resolution.

  How can I get my secondary monitor to show an image (any image would be great), while my computer is locked or simply putting in operation and reached the login screen.  Currently my secondary monitor shows just a black screen.  I do not want my screen to extend completely on two monitors (mosaic on nvidia video card) because when I do, my taskbar spans also the length of the two screens.  I like to use click once on my programs, rather than cluttering up my desktop with icons and you install vertically between the two monitors. I am unable to do otherwise.  Please let me know if anyone knows how to do this.  Thank you

  Hello

  Please contact Microsoft Community.

  I suggest you follow the steps mentioned and see if it helps:

  Method 1:

  Duplicate the display settings and check if you can view the screen saver in the monitor extended as well.

  To change your display settings

  1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

  2. click on the dropdown next to several screens, click on duplicate these appear, and then click OK.

  The option appears only when Windows detects multiple displays, more than one monitor connected to your PC.

  Note:

  o If you don't see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

  o ensure that the monitor you want to extend your desktop to is turned on and plugged into the video port appropriate to your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

  For more information, see the following link:

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Method 2:

  I suggest you to check the display resolution value for both monitors. Make sure that the resolution of the screen is the same on each display.

  For more information, see: get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  I hope this helps. Let us know the result.

• Reference Dell E207WFP monitor as an external monitor black screen

  When I connect this monitor to my laptop (lenovo y510p) it is properly detected by my system, but whenever I turn on the screen, it displays only a black screen.

  Anyone know why this is happening? I updated my drivers, so this probably isn't the issue.

  I am also using a dvi cable to hdmi

  It was the dvi-hdmi cable.  I tried another and it worked perfectly.

• of the laptop and monitor external both go to a black screen

  OK, I have a laptop Toshiba Satellite L675D and monitor external lg I've used for more than a year. the problem I knew it is that when I turn on my external monitor both the monitor to the laptop and external monitor goes to a black screen and to get the office page I have to turn off the monitor external and in a few seconds, the computer desktop computer laptop monitor will reappear. Fault could be the problem?

  Hello

  1. What is the model of the LG external screen?

  2. have you made changes on the computer recently?

  3. have you installed all the updates on the computer?

  Method 1.

  Connect the external monitor to a different computer and check if it works.

  Method 2.

  I suggest to update the graphics drive and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Refer.

  Move windows between multiple monitors: http://windows.microsoft.com/en-US/windows7/Move-windows-between-multiple-monitors

  Setting up dual monitor: two screens are better than one:
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Guided Help: Setup dual monitor is easy in Windows 7:
  http://support.Microsoft.com/kb/976064

  I hope this helps.

• Dark purple point on monitor dell U2312HM on black screens

  Hello

  I noticed this little earlier, a purple block to eye on my monitor that seems to be getting bigger... And the worst thing is his eye level and only seen on black screens / dark, who use a lot of games and movies... I tried to enter my serial number, but it won't let me... Monitor is not another year...

  THX

  Simpyd,

  Open my monitor of FAQ at the top of this map. Open, my monitor does not have a Service tag, how do I get the Dell service? ».

• Black screen in the source monitor

  I'm trying to synchronize an audio file that is good with my .mov. But when I do exactly what is described here automatically synchronize the audio and video files in Adobe first Pro CC from the audio - waves YouTube I just get a black screen in the source monitor. Why? Shouldn't I be see the its synchronized with the video file in the source monitor Panel?  I'm new to first, maybe if I have a setting turned off? Please advise!

  [Please choose a brief description for the title of the thread, and only after the real problem in the main body].

  Post edited by: Jim Simon

  Yes, the image expands, but you have the Source and monitors shrunk very small sizes n the screen capture program.

  Was the clip defined when you merged and exit points?

  (By the way, my post request 3 was on target.)  The video is considerably shorter than the audio, which represents a large part of the black you would see in the Source monitor.)

• Premiere Pro CC - program monitor displays only a black screen

  Hi all

  I hope there, can someone help me (and I'm sure many others) with this problem.

  I used the first Pro CS6 and was at Midway through a project when I upgraded to first Pro CC. It was very good and I finished the project, however shortly after this when I re-entered Premiere Pro CC to make some final adjustments and settings, the program monitor seems to be black. I see nothing but black on the monitor of the program window. When I play the project, the sound works fine, but I don't see anything in the program monitor.

  Please see the discussion linked here (http://forums.adobe.com/message/5487954) for more information on this issue. I'm hoping to turn the heat on it and get answers for everyone having this problem. She made my first Pro useless right now. I can't yet start new projects because it has the same problem.

  NOTE: I tried to roll back the CS6, but it does not work and I discovered this forum that roll back versions has never been possible. I also tried to reinstall CC PP but that does not solve the problem.

  I hope someone can help here.

  Thank you!

  I hope never auto-updates for nothing! I went to Nvidia.com and found a driver for your 5200M last month, try this - http://www.nvidia.com/object/quadro-notebook-win8-win7-64bit-320.49-whql-driver.html

  Thank you

  Jeff