Black screen on TV with M40-250

Similar Questions

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• NB100 implemented black screen after Windows (with bar)

  Hello
  I have laptop nb100.

  My Windows XP is not loading (learn how to Windows with screen bar, then it blocks black).

  I thought just re-intall Windows XP, so I tranfered my WinXP to .iso format and placed on my formatted USB (XP and .iso seem well).

  I changed my computer to boot from USB and f12 on start up and it goes to the USB port, no probs. Then, I get a black screen with these choices:

  1, text-mode Setup (flash start again after)
  2nd, continuous mode GUI installation, setup + 1 start windows
  ---> DEBUGGING Options. Try if you have the hal.dll error<>
  Debug the rdisk 1 2 boot partition
  Debug the rdisk 1 3 boot partition
  Debug the rdisk 1 4 boot partition
  Debug the rdisk 2 1 boot partition
  Debug the rdisk 2 2 boot partition
  Debug the 2 3 rdisk boot partition
  Debug the 2 4 rdisk boot partition

  Option: text-mode installation 1, (start to flash again after).
  kicks in a blue screen with the Windows installation
  wallpaper load some info
  then it crashes on Setup starts windows

  I have Win Xp SP2, was originally installed SP3, but can not find the drive (have to SP2 and 3) so I have Win XP SP2 through ISO then installed on usb (not sure if that is the question)

  All I want is to re - install the computer (no I have not re - install discs), so I thought it would be easier to re XP - install.

  Any assistance received very highly.

  Thanks in advance :)

  Hello

  > so I tranfered my WinXP in .iso format and put on my formatted USB key

  Sorry, man, but I did not understand how you have transferred it.

  I advise to get windows copy disk and USB drive to make a bootable usb drive to install windows.

  You can make a USB bootable in 2 ways:

  1. manually with the command prompts

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53324&TSTART=60

  2 automatically using programs such as WinSetupFromUSB or Novicorp WinToFlash

  http://myeeeguides.WordPress.com/2008/11/15/winsetupfromusb-install-Windows-XP-from-USB-flash-drive/

• black screen on startup with active cursor

  I have an old Dell Dimension 3000 has a processor Celeron, 512 MB RAM and was purchased in 04.  Despite his age, he has been a good PC and is mainly a backup unit when the main PC is used by my wife. Recently in November 2011 I lit it and as usual, Microsoft has had an update for me to download if I choose to. I downloaded the update, (can't tell you what update) and restart my PC.  The next time I turned it on I got the Dell splash screen and the Microsoft logo screen then black screen with a cursor active.  After reboot, I hit F12 and chose something like "go to last good known configuration" with the same black screen thereafter.  I kept rebooting and some so chose an option "Repair or r", and after that he went by the disk check and the areas I was once again on the black screen.  I then found my original installation disk and tried to start out with the same as before resutls... black screen.  I forgot to mention that Safe Mode does not work, I rebooted with no media in the CD drive, and I'm at a standstill.  Does anyone have the answers to my problem?  Thanks in advance for all your help.

  Wayne

  It's a shame, that we do not know what update it was!

  Do you have to manually download and install updates or use automatic updates? If the latter, which is enabled:
  Automatic
  Download updates for me, but let me choose when to install them
  Notify me but don't automatically download or install
  For later use, as a general rule, you must install ONLY the updates critical or high priority. Installation software optional or made optional hardware update can be risky! (There are some exceptions to the optional software, for example, root certificates update.)
  You can try different methods to repair your installation, but if you can simply perform a system restore, which should solve the problem fairly quickly. Then simply determine what updates (remember: only critical or priority!) you still need.
  I don't know if SR work because you are having problems to start in Normal Mode. If you're lucky, you'll be able to boot mode safe mode with command prompt. If you do this, follow these instructions:
  http://support.Microsoft.com/kb/304449
  Choose the date before the updates (15 November?).
  If you can not do the above, then post back for tips on how to use your Dell XP 'relocation' of brand CD CAREFULLY. You don't want to do something drastic like reinstall Windows!

• Black screen when scanning with Officejet J6480

  Printer HP Officejet J6480 all-in-one, Windows 7 64-bit,

  When I scan everything I get is a black screen. I ran the scan doctor and the report said everthing works properly. I don't get anything no matter how I run the scan. Can anyone help?

  Nope.  This isn't a party that has been designed to be replaced.  I'm sorry.  You may be able to run again to do a reset full semi.  For your printer, make sure that the machine is under voltage and unplug the printer.  Keep it # and 6 keys on the keypad of the printer.  With the # and 6 key held down, plug the printer back in.  Once the lights come on, release the # and 6 key.  Be aware that to do a complete reset semi resets everything on the printer.  If this does not work, the only other option is to get a new one.  The last model that would be similar to what you would be the OfficeJet 6600 or 6700 OfficeJet.  Technical support may have another choice for printers reconditioned if you give them a call.

• Startup message: black screen error box with the instruction at 0x7468a9df referenced memory at 0 x 000000000. the momory could not be read.

  Original title: What happens when I turn on my computer. Why? black screen with error box the instruction at 0x7468a9df referenced memory at 0 x 000000000. the momory could not be read.

  When I turn on my computer, get this Windows logon error message: logon UI.exe

  black screen with error box the instruction at 0x7468a9df referenced memory at 0 x 000000000. the momory could not be read.

  Hello, help,

  Unplug all devices - printer, speakers, digital camera, etc...  The attempt to start start

  You are able to go in Mode safe mode with networking?    Restart and the logo of computer, start typing F8.  See if you can download this file and run a scan complete for malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  If the auditor of applicable system files, run

  Right-click on command prompt and select run as administrator

  Type SFC/scannow

  Note: there is a space between SFC and /scannnow

  Press enter

  It will take a few moments for the analysis to be performed.  You can find the paper pressing the Windows flag key + r to open the run window

  Type %windir%\Logs\CBS

  Press OK

  Search for ""impossible to repair corrupt files"Note all corrupted files that are not repaired."

  Try to extract the file to your recovery CD.  It is possible Logonui.exe has corrupted.

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

• black screen and slider with start now on windows 10

  I need to download a boot disk. Where can I get a free. Windows 7 came with my new computer when you bought it.

  Hi Mark,

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you get a black screen on your Windows 10 machine and you want to download Windows 7 create a bootable media. I will certainly help you to the query.

  I would be grateful if you could help me with more information:

  Did you get the black screen after upgrade to Windows 10?

  I suggest you first try to follow the suggestions of Sharath Srinivasa responded on August 7, 2015 in below mentioned thread to get the black screen in the operating system of Windows 10 fixed.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  https://support.Microsoft.com/en-us/KB/322756

  However, if you still experience the problem or for the future, you can download Windows 7 using link below:

  Windows USB/DVD download tool

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  Once the created bootable media, you try to install Windows 7.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• I restarted my computer and then it no longer turns. The windows screen and then a black screen came up with a white line that flashes at the top left.

  I had tabs open, and he said that he would not allow restart, but still, I pressed ok and now nothing shows that this black screen.

  Hi Alegreen,

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: If the method above does not help, then you can refer the article and check mentioned below.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps.

• Black screen after login with password.

  Original title: connection.

  I have a password protection on my computer. Windows updated the other day, after my password, I get a black screen. A second or two later my image appears again and I have to put my new password, but I get the black screen and cannot get in.

  Other user accounts work normally. Any suggestions please?

  An update creates a restore point. Assuming you have another admin account, or the dialog box for the approval of the admin works, the restoration is expected to do.

• G2 250 HP: HP 250 G2 - black screen on startup with all Linux distributions

  Hello

  I bought this laptop a few months. Any Linux kernel has trouble handling this notebook, although it has been, said a statement with Ubuntu and I expected to be well supported.

  Any distribution installed, to start the laptop can not handle the blackscreen monitor and goes. I noticed that the LEDs are still quietly "flashing" and it work, but it remains black. The only way to boot your laptop is adding to the 'nomodeset' kernel command line, but to start the PC laptop resolution is too low and the use becomes uncomfortable.

  I solved all the problems of the Bios Update. Thank you all.

• Black screen on startup with battery on satellite T110-R13

  Hello

  I have a problem: when I start my T110-R13 on battery, the screen remains black. No picture Toshiba appeared.
  If I remove the baterry and I put it again, it starts!
  I tried to start with AC adapter (with no battery) and it starts!

  I don't understand. Help, please!

  Concerning

  > when I start my T110-R13 on battery, the screen remains black. No picture Toshiba appeared.
  This happens again and again when you start several times?

  To be honest, it's really strange.

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• Black screen that appears (with a cursor) after startup on Windows 8

  When I start my pc I get a cursor and a blank screen after the Welcome screen. Help please

  Hi Salah,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description, it apepars that you get with the black cursor screen after the Welcome screen. I will certainly help you fix this problem.

  (1) the question has started recently?

  (2) have you made changes on the computer before this problem?

  Method 1: Unplug all external devices connected to the computer except keyboard, mouse and monitor and check if the problem persists.

  Method 2:

  Step 1: I suggest to start the computer using safe mode and check if it helps.
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the issue is not persistent, then follow step 2 to find the cause of the same.

  St ep 2 : I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual.

  • On the Start screen, type in msconfigand press ENTER.
  • On the general tab, type or click the Normal startup option.
  • Press or click the Services tab and uncheck hide all Microsoft services, and then press or click enable all.
  • Then, press or click on the Startup tab, and then press or click Open the Task Manager.
  • In the Task Manager, select all your startup programs and then press or click OK.
  • When you are prompted to restart the computer, tap or click restart.

  Method 3: I would also say you update the display drivers and the graphics card on the manufacturer's Web site and check the status of the issue.

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Black screen on startup with a Satellite U200-115

  I have a U200-115, I downloaded an upgrade for the BIOS of toshiba and installed in accordance with their instructions. Since upgrading my laptop does not start, all I get is a black sreen with a sound signal and a flashing light orange.

  Any ideas?

  The U200 is a new laptop. Don t think you will find diagrams for the motherboard. But why do you need them?

  As mentioned above the BIOS flashing failed and you need to contact the ASP in your country. If you area lucky man that the motherboard must be not changed but the chip of the ROM BIOS flashed again. Do not hesitate to ask for the help guys!

• Black screen of U2414 with the flicker photo

  Hi team, support

  I have u2414H Dell screen that plays up. After several minutes of fed without problem on the screen go black and then intermittently flash the image on a nothing between a fraction of a second for a minute. This will continue until the monitor is disconnected and reconnected. The power button stays white all the time. By pressing the buttons mode does not answer either. If I press the power button if it is in a short work phase the white rest button but the screen would then become completely insensitive.

  I tried several cables and sources so I can confirm that what is happening on the DisplayPort and HDMI ports. I ran the Self test when the screen changes colors and she even did for that.

  Looking forward to your reply,

  Dave Evans

  Good troubleshooting. Get it exchanged.