When ISE goes down, none of the computers can get to shared network or the Internet.

We only run Cisco ISE 1.4 with only computer authentication and recently had a power outage for about 6 hours. When the batteries of the UPS drained EHT servers are connected to the, none of the computers could connect what either. The NETWORK card on the computers had an error authentication failed. We "Rescue of unauthorized network access", selected on each computer. Is there a way to allow all computers access to the network and the internet as usual when the ISE servers are down?

The port configuration is less to:

switchport access vlan 77
switchport mode access
switchport voice vlan 777
IP access-group ACL by DEFAULT in
authentication event fail following action method
action of death event authentication server allow vlan 77
living action of the server reset the authentication event
multi-domain of host-mode authentication
open authentication
authentication order dot1x mab
authentication priority dot1x mab
Auto control of the port of authentication
periodic authentication
Server to authenticate again authentication timer
inactivity timer 180 authentication
restrict the authentication violation
MAB
no link-status of snmp trap
Auto qos voip cisco-phone
dot1x EAP authenticator
dot1x tx-time 10
QoS trust device cisco-phone
spanning tree portfast
spanning tree enable bpduguard
service-policy input AutoQos-VoIP-entry-Cos-policy
service-policy output AutoQos-VoIP-output

You must use a script of EEM to change the ip access list that you assigned to the interface, to something with "permit ip any any" inside.

'action dead event server authentication allows vlan 77' won't work that in configurations in closed mode, do not use an acl of pre approval.

Tags: Cisco Security

Similar Questions

  • I can not 'click' on what anyone at the top of any page. When I go down a little bit, I can. This prevents me from using many web sites. How can I erase this upward?

    I can't 'click' whatever it is at the top of the web sites. The arrow remains. When I scroll down, and then the hand can be seen, and I can click. But this problem prevents me from accessing information. No help available?

    Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, maybe an addon intrudes here (most likely a toolbar exceeded some kinds)...

    Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  • WIFI problem, Toshiba Satellite A665 internet connection. Lately when I try to connect to the internet, for the first minute or so it says "no internet connection".

    Hi all

    I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.
    I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.

    If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.

    I hope this helps.

  • When I try to connect to the internet it tells me I need network drivers.

    Original title: Windows 7 drivers

    Hi, I recently built a computer with a motherboard Asus H81M-E. I installed Windows 7 pro 64-bit. When I try to connect to the internet it tells me I need network drivers. Where can I find the drivers? There are all the other drivers that I need to install for the computer to function properly? Thank you for reading, I hope you can help.

    I don't know a lot about the generation of computers, but I don't know that you need a network adapter to connect to the internet, which would be listed in the Device Manager.  You really need to go to the asus help and support.  But to give you an idea of what adapter need use Google to search for: asus h81m-e network driver

    Good luck

  • I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

    I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

    Hi evilcrebyc,

    Consult the following Microsoft articles and make sure that all settings are correct.

    How to configure Internet connection sharing in Windows XP

    http://support.Microsoft.com/kb/306126

    Troubleshooting Internet connection sharing in Windows XP

    http://support.Microsoft.com/kb/308006

  • When we look something up on the internet, I'm always redirected 4to7 times before I get the page I'm after. What is a virous and how do I get rid of him?

    When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

    When I try to go on the internet, after you type in a subject, I get the usual list of items to the choice. But when I try to select one of them, I redirected sometimes up to 8 times before iget the page I want. I redirected pages yellow and many other sites that have nothing to do with what I am looking upward. If it is avirous how can I get rid of him.

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

    Unable to connect laptop (wireless) broadband

    Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

    Remove any preconfigured network settings wireless then rescan to make new connection settings

    Hope this will do the needfull

    Please let us know

  • When I try to connect to the internet via the usb cricket modem thing, I get an error entry ras error creat/change also error 1068

    Original title: new laptop user

    I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?

    Hello

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    "Error 1058" error message appears when a service stops unexpectedly

    http://support.Microsoft.com/kb/241584

    Also refer to this article and check if it helps:

    "Error 1068" error message when you try to enable Internet connection sharing

    http://support.Microsoft.com/kb/827328

    Note: Also valid for Windows Vista

  • Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

    Wireless connections

    I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

    Hello

    I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

    You can also try the following methods and check if it helps.

    Method 1:

    Update a network adapter driver.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Troubleshoot network adapter problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • error when you try to download on the internet.

    Help!

    I get an error; "Extended attributes are incompatible" when I try to download on the internet. Why and what to get fixed?

    Need your help as soon as POSSIBLE. Thank you.

    Sincerely,

    Melinda

    How is it related to the installation, upgrade and activation of Windows Vista?

    Tell you download or install?

    If you mean install:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/the-extended-attributes-are-inconsistent/129b7935-2da2-47B2-8b4d-e8b581e12b54

  • BOUGHT LIGHTROOM AT 6 BBY. I CAN not DOWN LOAD ON the INTERNET, I HAVE NO DICKDRIVE ON THE NEW 2/1 PC

    THE NEW 2/1 CAME WITHOUT A HARD DRIVE.  I HAVE THE DISC AND ALL THE NECESSARY CODES.  10 ON PC WINDOWS. I CAN NOT DOWN LOAD ON THE INTERNET FROM ADOBE?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

  • Downloaded the trial version of Acrobat DC. Now cannot open any program acrobat. I get the error message when needed to connect: connect to the internet and try again. Computer is out of connection or your computer's clock is out of adjustment

    Downloaded the trial version of Acrobat DC. Now cannot open any program acrobat. I get the error message when needed to connect: connect to the internet and try again. Computer is out of connection or your computer's clock is out of adjustment

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

    Mylenium

  • I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

    I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available had merge to HDR & Panoramic photos. I can't find these. Where can I find them.

    It is unfortunate that Adobe has chosen to use the "update" in the notice inside LR 5. It is not an "update". It is an 'upgrade '. Thus, you pay if you want. Also as usual, Adobe directs clients to the CC solution and makes it hard to find perpetual license option.

  • I can see the product helps when I am not connected to the Internet?

    On the product help creative cloud

    You can view help for your product when you are not connected to the Internet by download help PDF of the product for your product. For more information, see the help in Adobe products offline.

  • Photoshop elements Organizer 11 goes down because of the deadlock in the wait thread chain creating thumbnails for short files (AVCHD)

    Hello

    organizing items 11 creates a blockage in the wait chain when generating thumbnails from more than a handful of MTS (AVCHD) files.

    After you import the files AVCHD from my camcorder Canon, the Organizer by using the settings by default always breaks down. I was able to narrow the problem caused by the generation of thumbnail.

    After disabling the automatic generation of thumbnails, the Organizer goes not down more at the launch.

    Of course, it is inconvenient to work without thumbnails. The next station is a manual release of the generation of thumbnails by selecting "update the thumbnail.

    If I manually start the update of the thumbnails of the files one by one, and then it works for quite a lot of files before crashing again.

    Selection of miniature update for several files at the same time has a much higher probability to crash.

    This does not seem to be related to the content of the particular file: a file that leads to crashing once can be perfectly get a thumbnail created on the next attempt.

    The Windows event report looks as follows (German language Windows):

    Fehlerhaften der application name: PhotoshopElementsOrganizer.exe, Version: 11.0.0.0, Zeitstempel: 0x505e9f67

    Name the module fehlerhaften: msvcrt.dll, Version: 7.0.9600.16384, Zeitstempel: 0x52158ff5

    Ausnahmecode: 0xc0000005

    Fehleroffset: 0 x 00009919

    The process fehlerhaften ID: 0x13c8

    Startzeit der fehlerhaften application: 0x01cfb676145d0c54

    Der fehlerhaften application path: C:\Program Files (x 86) \Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe

    Path of the module fehlerhaften: C:\WINDOWS\SYSTEM32\msvcrt.dll

    Berichtskennung: b8817e29-2269-11e4-bf2d-10bf487f7b28

    Name of the full of the fehlerhaften package:

    Anwendungs-ID, die zum fehlerhaften Paket ist relatively:

    Occasionally, another module is listed as wrong instead of msvcrt.dll.

    My questions:

    -everyone knows the same problem?

    -is a known issue with 11 Organizer?

    -is the problem solved with the Organizer 12?

    I have first items 11, Photoshop elements 11 installed and not known to other problems with these applications.

    Playing AVCHD files (*.) MTS) works perfectly, that is, I have not any codec or performance problem on my PC.

    Disabling of anti-virus software has no significant effect. I have excluded video directories of the analysis in any case.

    Have disabled the facial recognition, search Visual and smart tagging in the Organizer.

    Also disabled hyperthreading in the BIOS.

    By using the compatibility settings to Windows XP for PSE somewhat improved stability, but does not completely eliminate crashes.

    In addition, it signnificantly slows down the generation of thumbnails and an indication of progress window becomes visible during the generation of thumbnails, which is barely perceptible natively from 8.1 to win.

    Officially, 11 items is compatible with Windows 8.1.

    There is a knowledge base article associated with 6 elements, which recommend to disable multi-threading and running on more than a core Organizer.

    This reduces the problem somewhat, but always more than a handful of files leads to crashing miniatures.

    Through the Task Manager, I analyzed the PhotoshopElementsOrganizer.exe process wait chain:

    Each time the error occurs, it is caused by a blockage in the wait chain.

    For example:

    PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540

    -PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932

    -PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540

    PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932

    -PhotoshopElementsOrganizer.exe (PID:6440) Thread: 6540

    -PhotoshopElementsOrganizer.exe (PID:6440) Thread: 5932

    Concerning

    Oliver

    ------

    Microsoft Windows 8.1 Pro, 64-bit, 6.3.9600 Build 9600

    Intel Core i7-3770 CPU @ 3.40 GHz,

    16 GB OF RAM

    AMD Radeon HD5450 1 GB

    256 GB SSD, Crucial M4-CT256 (Windows, Application, Swap and Temp files), NTFS

    1.8 TB drive HARD, Western Digital, WD2002FAEX-007BA0, NTFS (media store)

    Problem solved:

    I uninstalled all other codecs and filters. It seems that this was caused by a filter of LAV (but I have not tried to reproduce the problem, I can't be sure).

    Everything works fine now and Adobe wants not to be blamed. .

Maybe you are looking for