Black screen, two flashes on Compaq Presario CQ 61 (CQ61-325ED)

Similar Questions

• Black screen after flashing to latest BIOS

  Nothing but black screen after flashing the latest bios (fan, leds work)...

  I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

  I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

  By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.

• HP G62 U.S.-340, black screen and flashing caps lock.

  HP G62 U.S.-340, black screen and flashing caps lock when I turn it on, and some time it lights up as it should. I tried draining the power of the unit to reset and it wasn't any help. Can you help me please?

  Hi @mikeyh25

  Thank you for your request, I will do my best to help!

  I understand that when you start your laptop, you get a black screen with no error message, but you see the flashing lock light.

  Here is a link to help you.  The computer does not start and the lights blink or the computer will beep.

  Good luck!

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• Best graphics card for two monitors to Compaq Presario SR5610F

  I have a Compaq Presario SR5610F.  I want to upgrade the video card, so I can run two monitors.  What is the lowest card cost that is compatible with this machine?  The computer has the PCI Express Slot.  It has only a power of 250W.  There is a card that can be purchased to upgrade the memory of 256 MB card, run two monitors and I must not change the power supply?  I have a high-end gaming card.

  Thank you

  MJCSJC1

  Are what video connectors your monitors supported?  Most of the low-end cards have vga and DVI connectors, you should swing $30-$60.  If you are looking for dual DVI, nVidia has a 8600GT for around $100 but may need to get connector to power the card with your current diet.

• black screen w/flashing (dos prompt that usually work) at the corner of L/H.

  I have a D-610 from Dell with windows XP, when I turn on the computer, the printer Dell flash screen appears and then goes to a black screen with a flashing on corner top l/h. I tried to boot into safe mode, nothing works. I ran diagnostics, no help.

  I decided to run a repair of XP Cd and restart, the same thing. The machine was working fine until my daughter it off last night. Ideas, any help would be appreciated.

  It's really a common problem.

  "Off" means using the power instead of a normal shutdown button?

  I start in the XP Recovery Console and run a chkdsk /r on the system first to make sure that the file system is not afflicted.

  Start in the XP Recovery Console is not the same as starting on any system or recovery CD which might come with your system.

  If that didn't change things, I would then run fixmbr, but since you have a Dell, which would replace the customized Dell Master Boot Record If it exists (maybe there's not a MBR custom Dell or maybe it's OK for you).

  The Master Boot Record, it's giving you a bit of your startup options and sometimes Dells have things installed on the hard drive as a bootable recovery, a diagnostic partition partition, etc. and if you run fixmbr, you lose those.

  If you run fixmbr/fixboot, which would put everything on the news of XP, and you would not be able to use the Dell boot options again.

  Maybe it's okay with you, or maybe you do not have them at all.

  But, now that you've tried to fix it, things get more complicated.

  If you have some personal data out there, you can save somewhere outside of a USB device or a place like this before continuing.  There are a variety of methods to do so.

  You could also post your question on the Dell Community and see what they have to say.

  When Support of Dell people do not know what is happening, they will usually tell you that you need to reinstall your XP from scratch, but I never do.

  The Dell company sometimes has good ideas, but they are hard to find and sometimes their "experts" seem to have ideas that are less useful than here (if possible!).

• Black screen with flashing underscore concerns after removal of Rootkit

  HP Envy laptop (Win 7)
  Microsoft Security Essentials identified the Alureon trojan/rootkit, but could not clean after numerous attempts. I downloaded Malwarebytes Anti-Rootkit and it ran. He found and cleaned 3 threats. After completed cleaning, the laptop it will only boot to a black screen with a flashing underscore.

  I can access the boot, BIOS, System Recovery menu, etc. by pressing ESC at startup. However, I can't get into safe mode.

  There is an HP Recovery Manager option in the boot menu (F11) where you can access to Windows system restore, but also a few other options. I tried several restore points. Some boot worked but it is still in the black screen, other has no restore points.

  Thank you

  Hello

  In this case I suggest you select the option 'System of valuation (restore your computer to its original factory State)' - this will reinstall Windows 7, all software drivers and original, and all of the original scores.

  At the beginning of this procedure, you will have the option to backup your files (providing the files have not been corrupted)-this can be done for a connected external HDD or usb flash drives.  A full description of the backup process are under the heading "If you want to back up your personal files, follow these steps to create a back-up" on the following link.

  http://support.HP.com/us-en/document/c01867418

  Once completed, continue with the Factory Reset.

  **************************************************************

  Once the process is complete recovery, you'll always be able to create your 1 set of recovery on a usb flash drive media - the procedure is detailed in the HP document on the following link.

  Create recovery media - Windows 7.

  Best regards

  DP - K

• -command prompt? (administrator or black screen often flashes - how do I stop this?) Windows 7 Ultimate 32 bit

  Nice day

  I recently updated a Windows 7 Home Premium 64-bit for Windows 7 Ultimate 32 bit.  Long story why, but it works better since.

  There is one thing that past seems weird.   CMD (I think that's it), or this black screen command prompt appears on the screen every now and then.  I can't tell what is the boss, or that it triggers.  But it is quite often.

  What this has to do with being administrator or the administrator account on my own laptop. Nobody else uses it. This is my personal laptop.   I log into my admin account when using the laptop and do not use the other account username or guest account.  This is info I added here for your info.

  The blinking indicates something wrong?  Or how I disable that or stop its frequency?

  Thank you very much!!

  Massachusetts

  And how can I stop the task?

  I will also say that the screen flashes about 8 times in one hour.

  Before you can stop the task, you must identify it. You can do the following:

  1. Launch the Task Scheduler with the taskschd.msccommand.
  2. Click the task Scheduler Library.
  3. Consider different trigger points.

  

• Part of my screen is become white (Compaq presario CQ61)

  It happened all of a sudden, that a large part of my Compaq presario CQ61 laptop screen has become white. It looks like the image as an attachment. Can someone help me solve this problem. Thank you in advance.

  This is how my screen looks like

  Well, it can be difficult to tell exactly how damage happens on the screen.  But there is no need to be something as obvious as a fall. Sometimes, it will put pressure on the screen - stacking heavy objects on top of the laptop or by closing the form while there is a pen on the keyboard are things that can damage the screen. The problem might not appear immediately - it can take some time for the liquid flow through small cracks in the inner layer of the screen.

• black screen with flashing related underscore

  Hi my name is Joshua, I have a computer that starts, but then gets the black screen with a flashing underscore in the upper left. I check my hard drive and my ram on a separate computer and they all work and start fine. I can not even boot the recovery disc or same thing happens to a black screen with the underscore. Please help I'm a youtuber and have not been able to implement all the videos by the way in which this computer is new.

  Hey I found the problem. the hard drive was not entirely start cause I'm a card mother amd. has my other hard drive and just reinstalled windows has windows 7 on it and its working fine also the cd drive has been bad had to pass out but thanks for the info, I can use it later in life.

• Re: Satellite L300 - black screen with flashing white cursor

  All of a sudden my laptop won't start more. It turns on, displays screen toshiba for a second and then goes to a black screen with a blinking white line in the upper left corner. I can't type something here! The last time I used it it was 100% very well, I have not downloaded anything so I'm very curious to what it might be.

  Help, please!

  Hi mate,

  Maybe something messed up to the top of your Windows installation and if the computer may start t more or your HARD drive becomes faulty...

  You can access the BIOS? If so, check if your HARD drive is recognized. If so I think that it of necessary to reinstall Windows. Therefore, take the Toshiba recovery disc.

• Black screen with flashing '_' in the upper left corner.

  Im running Vista 64-bit Home Premium and recently ran chckdisk because the computer found some "bad sectors" and prompted me to run. After reboot, the computer loads the image in which I can press "delete" to enter the bios (which I do), then press "tab" to go to the post OFFICE (which has no effect and always load the black screen with a '_' blinking at the top left. If I do nothing, the black screen with the '_' blinking always appears after the image. I can't start in safe mode or access the "Advanced Boot Options". The only thing I can do after the black screen is press "ctrl alt del" in which the same process begins.

  I bought my computer from online retailer so it did not come with any CD to restore/recover...

  Hello

  1. did you of recent changes to the system?

  Check her unplug all devices external (except keyboard and mouse) and if you are able to boot.

  If this isn't the case, I suggest you contact the manufacturer or retailer for a Windows Vista Installation DVD.

  Once you have the DVD you can try to perform the Startup Repair.

  Method 1: Run a startup repair.

  (a) Insert the disc.

  (b) restart your computer using the power button on the computer.

  (c) If you are prompted, press any key to start Windows from the installation disc.

  (d) If your computer is not configured to boot from a CD/DVD, check the documentation that came with your computer. You may need to change your computer's BIOS settings.

  (e) choose your language settings, and then click Next.

  (f) If you are using the Windows installation disc, click Startup Repair. (g) click ok when you are prompted.   Follow the steps in the link to perform a startup repair. http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope his helps.

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• HELP computer laptop has frozen with power on a black screen and flashing lights

  Hi I have HP Pavilion dv 7-3162nr laptop. When I turned it on all the lights have gone but the screen was completely black. To add, the shift lock and numlock began to Flash all 3 secends. I have no idea why my laptop that was, but pls pls HELP all my tests and valuable information on the laptop. I'm dead without him! Thank you!

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

  If the above doesn't help, see if you can match the sequence of "Flashes" to those shown in the table below.

  

  Kind regards

  DP - K

• XPS 13, Black Screen, 5 flashes white, amber 2 flashes

  Hello

  I don't know if everything is connected, but here is the story complete.

  I bought my laptop when it comes out in November 2015 (8 GB, without contact). About 5 hours ago, the task bar/all windows did not fit my screen, but an update for one of the pilots visual resolved. Two days ago his order of play, but an update to one audio drivers fixed that, as well.

  Yesterday and today, my laptop has frozen sometimes when I ran something idle (YouTube, leaving an open window, etc.). Force I closed down my computer whenever my computer froze, but my computer started flashing 5 flashes white and 2 flashes orange in sequence about every other time I turned on my computer after force quitting. What is strange, is that, when the light under the track button is flashing, the power button does not shine, if I press the power button, the computer emits a sound like the fan market, then stops.

  I tried to start my computer in diagnostic mode where it is possible, but it keeps on freezing in the middle of this diagnosis.

  Is there anything I can try? I'd be really sad if I restore my computer: c

  Thank you.

  Hello

  I called customer service and they did some diagnostics with me. In the end, I had to send my computer to their technicians (apparently, there was a malfunction of the main logic board).

  The positive was that no data has been lost.

  Good luck!