black screen, white letters. Why? Android-mobile

Similar Questions

• I have cs6, when I try to use channels to hide every time I choose one of these channels, the peak towers all this color, it does not appear in black or white.  Why?

  I have cs6, when I try to use channels to hide every time I choose one of these channels, the peak towers all this color, it does not appear in black or white.  Why?

  It may also be that in the Photoshop (Edit) > preferences > Interface you can view layers in colors checked.

  

• Windows Vista no longer starts after re-installation (cursor black screen, white after installation)

  A few days ago I decided that I wanted to start my Dell Inspiron 1720, back to square one. I knew that there are a few options, so I tried to restore. I realized it let me only a month back in time and my computer was slow for about a year now. I looked through my manual that came with my laptop and decided to unstack reinstall drive in and all re - install Windows Vista. I realized after I put the disk in and from the installation, I forgot to disable my anti-virus (trend pro microphone). I don't know if this is causing the problem, but after the installation, I get a black screen with a white cursor. I let it sit for about 4 hours before I decided to restart my laptop. Once I rebooted, it wouldn't let me normally, start in safe mode, or start from the last successful boot. I then tried to fix with my Vista DVD and who do not have too much work. I also tried the restore and it tells me that I am running in a low state of diagnosis and it cannot be done. I tried to reinstall vista twice since then and I'm out of ideas. Help, please! I forgot to add, when I try to start in safe mode, it stops at the ckcdisk.sys (I think it's called).

  millsx89,

  When you install Windows Vista on the 1720 Insp, you need to install the SATA drivers during installation. That's why your system stops at this point. You can also boot into the bios by pressing F2 and changing the Sata in ATA instead of AHCI operation. And then install windows. You will need to change it back once you have installed windows and loaded the drivers.

  Thank you

  Jesse

• Satellite L555 simply freezes with black screen (White Stripes)

  Hello

  I'm having some problems with my new Toshiba Satellite L555 laptop, it is simply freeze and appears a black screen with white bands.
  He don't do it regularly, but it's annoying.

  Any suggestions?

  Hello

  The possible reasons:

  1. a malfubction graphics card
  Malfunctioning of the internal display 2. You can view the external monitor to see how it is?

  As little as possible:

  1 a graphics driver
  2 operating system itself. Have you tried to reset to factory settings (F8)?

  Otherwise, you must contact the Asp (SAV) in your country. Your laptop is still new and under warranty, so it will fix it for free.

• Boots Vista 64 Ultimate SP2 (with domain) to the mouse cursor black screen white after that several failure system restores

  Who can help me to WHO:

  Sorry for fast hiking, misspellings, it's late and I do not use my normal computer to this problem I have.

  I am currently sympthym to start the black screen with a white cursor (furniture, put in construction in the middle) with my laptop Dell Studio 15 (model 1537) that running Vista Ultimate 64 bit SP2.  He started tonight after repeatively, I tried to restore to a date prior to the System Restore tool.  I wanted to get back to Monday due to some software installations.  However, each attempt to restore failed and then after the 3rd or 4th attempt, when I tried to restart, I was faced with a window very long stop, and I was impacient and pressed and held the power button to stop it.  Subsequent starts, I've known this problem with no solution having been found for the moment.

  I tried several things at first, such that I tried Ctrl-alt-del, control-shift-esc, blindly connect with my fingerprint.  I tried windows key combos, but no luck.  Still stuck with screen black mouse cursor

  I have my vista ultimate 64 bit installation disc, and I started with the dvd and tried to fix it.  Automatic repair tool says he finds a problem with my start and had a difficulty to which I applied and rebooted.  But it did not work.

  Then, I tried to boot from the dvd again and did the repair option again, this time, Autostart reparir tool see nothing wrong with my start and I tried a system restore, but alas, it failed after having worked for a bit.  Telling something about restoration being corrupted.  I tried command prompt (X:\Source) and make chkdsk c: /p (which btw, implies / f as well) and it found some errors and repaired them or what not was wrong to write to newspapers, even if and then after long waiting, returns to the c: prompt.  No effect.

  On subsquent dvd boots, I tried the option to command line renaming a "Logs" directory and create a directory "Logs" empty (which was mentioned in some research online and even in a few posts here), but that has not solved the problem for me either.

  Dvd later boots, I have tried regedit solution method, where you will load a SYSTEM key and set some sort of AUTHORITY NT set... but when I checked key, she was already the correct setting.

  Then I learned that I could press the "Shift" key repeatedly while mode cursor screen black/white/and try the propmpt for keys pop-up to sticky.  But he said no 'link' as many instructions in this message box.  When I click 'Yes' to sticky keys, nothing is displayed and the pop-up closes.  Ditto for the 'no '.  There is no mention of accessibility settings.

  I tried all modes of security, but just a white cursor plu experience.  I have tried to use "last known configuration', 'debug mode', 'start logging mode', mode"disable driver signing"and again, the same thing, the cursor of the black and white screen.  I'm really at my wit's end, and I don't want REALLY to re - install everything (operating system, programs, settings, etc.) ... I did not back upward, and I use this machine without problem for more than a year.

  I remember once XP has a "repair install" mode which was really obvious to end users, since it looked almost identical to a clean install.  I have also heard (but can't really confirm) Vista has no such a fashion, that, by clicking on install, he repaired to the simular OS to XP disks how would repair their facilities.  I can't risk my data/programs/settings for accidental clean installation.  Help, please!

  Sincerely,
  Robert Eckman

  According to me, put it back in place, is the only solution to your problem!

• Black or white point in LR Mobile setting

  In Office LR, you can hold the Alt (Option) key while moving the black or white Slider in the develop module to set the White Point and Black Point.  Will there be an equivalent action in LR Mobile? What is it?

  Drag the black or white Slider in Lightroom on mobile with two fingers instead of one.

• BlackBerry Smartphones Black screen, white screen & reload software 507

  This is my first post on a forum, so please, be gentle.

  I have a Blackberry Curve 8530.  Several months earlier, during a daily use, the screen would go black all of a sudden.  A battery pull would solve this problem for a while.  Finally, it has become more common.  Symptoms have changed (it seems that if I put the phone down too quickly it would reset), the phone turn on, then immediately go to a white screen where everything was undetectable by my computer.  I contacted my service provider and they said the phone was toast and (surprisingly) gave me a free ready to use for the duration of my contract (all information transferred via an old backup, so nothing has been lost) after that my new phone work I left my curve is connected to my office.  Yesterday as I was leaving I watched again once the phone, and the screen was white and telling me to reload software 507.  I plugged my computer to start the process and to my surprise, the computer has detected all of a sudden the phone and successfully upgraded the software.  Everything was beautiful, I exceeded the password stage and he would just start to recharge my information when the screen faded empty again.  I always free loan phone, so it's not a big deal, but it's so annoying as to what could be the problem.  Now the computer can detect is more the phone again.

  Thanks for reading my long post.  Any help that can be provided would be greatly appreciated!

  Chance if you can do a battery pull and try

  http://supportforums.BlackBerry.com/T5/device-software-for-BlackBerry/how-to-reload-your-operating-S...

  for a reload of software.  No guarantee, because the computer does not pick up the phone on a consistent basis.

• When I place a colorful picture, it becomes black and white. Why?

  Pleas advise which settings to change, to keep the image in color when it is placed.

  The file that you place the color image is the most as set to grayscale.  Display it in another color space.

• Display screen is reversed: black screen with white letters

  My screen goes black with the letters white and blue; very difficult to see/use. My email is all black screen, white letters. How can I change into white, black letters?

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  http://www.Vistax64.com/tutorials/83824-color-scheme.html

  How to change the color scheme in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• big white cursor of Vista black screen

  Yesterday, my son plugged a USB stick on my Toshiba satellite laptop that couldn't be read.he removed from the device and closed the lid, it ' re-opened the lid and the black screen, white cursor appeared. Work hard drive light was not on either. I pressed the power button and the laptop exploded. I rebooted, but got the screen toshiba showing options to change the boot up. I tried pressing f2, nothing, restart the pressing f12 nothing. I have the recovery disk, repair and recovery system is inside the laptop. This didn't happen with separated is disks. All boards

  Thank you

  Moved from Vista devices and drivers Forum.

  You are welcome.

  See you soon.

• Why have my tiles left black and white? I don't know how to change the color. Help :(

  I bought and downloaded windows 8 online a couple of weeks. Not since the PC then, but tonight when I registered on my tile was and is always black and white. Why? and how to fix it?

  go to settings, then accessibility, then turn off your "high contrast".

• scanappears only in black and white

  I scan a document in color to the computer or e-mail attachment, but apparently only in black and white. Why and how can I get it to appear in color?

  Thank you... Yes. I would have given the rest of the info (operating system, model of printer, etc.); Sorry about that, I was getting very frustrated. Finally, I downloaded the drivers again and everything seems to work now.

• Windows 8 will not start, shows a black screen with cursor

  I tried to turn on my hybrid 3 cell / tab lenovo black this morning. After starting, it shows only a black screen with the cursor mouse mobile, but it stays like that for hours, until now. I can't turn it off, nor can I force turn it off by unplugging the battery it has unified the design of the body. What can I do?

  Hello Mel.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  How to solve a problem of black screen crash
  https://support.Lenovo.com/in/Hi/documents/ht079944
  (Also valid for Windows 8)

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• file becomes black and white when open in ps

  Hello

  I have adobe cc on a computer mac laptop.

  I worked on a file in photoshop, open the same file in illustrator without linking it and added some text. I returned to photoshop, re-open the case as an AI. doc in ps.

  The whole thing turned black and white! Why? How to solve this problem?

  Fine thanks

  M

  Thank you very much! You have some very useful info!

  Turns out I had gray levels in color settings. I don't know why, as I wasn't with her before. If PS put the black and white file as a way to temper tantrums? I have opened the case after making sure was in CMYK mode and it worked just dandy.

  Thank you!
  M

• Why do I get a black screen with a white cursor?

  I have a Gateway DX4200 with Windows Vista Home Premium 64-bit. Two weeks ago I shut down my computer up-to-date, since then, I can't download Windows. I get a black screen with a mouse cursor white that I can move but it is. I have tried several things but nothing seems to work. I tried pressing F8 and repair this way and safe mode does not work. When I press Ctrl-Alt-Del or any other key.

  Hello

  You receive an error message?

  Method 1:

  I also suggest you to follow the steps and check.

  a. Insert the Windows vista installation disc in the disc drive, and then start the computer.

  b. press a key when the message "Press any key to boot from CD or DVD".

  c. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  d. click on repair your computer.

  e. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  f. in the System Recovery Options dialog box, click System Restore.

  g. follow the instructions in the System Restore Wizard and choose the appropriate restore point.

  h. click Finish to restore the system.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out