Black spot under finder

Similar Questions

• turned on my laptop this morning and it has black spots and scribble like marks on my screen that appeared suddenly help

  The black spots are scattered, he looks in time my screen goes black, can someone help me with this poblem? tysm your help is greatly appreciated.

  Hello

  Looks like you have corrupted graphics drivers or, if there is no graphic material.

  Make sure you have the last "any OS you use" graphics/video drivers installed.

  Go to the website of the manufacturer of the laptop > drivers and download article > key in your laptop model number > then your operating system > find the latest graphics and video drivers for your operating system and download and install.

  If the problem persists and you are still under warranty, contact the manufacturer of the laptop.

  If it is not under warranty, contact a good computer, good reputation and support local repair shop.

  See you soon.

• Large black spot on the page and pasteboard

  I use CS3, InDesign worm. 5

  I have 100 pages (type, a book page 440), with a large, 1 x 3, solid black spot (a double sequence) that extends from the top of the chessboard of paste into the document of 1.5 inches on a single page. Sometimes it disappears, sometimes it reappears. I exported the file to PDF (for printing high quality). It was not visible in the PDF, but it printed (printing of digital book CreateSpace).

  The task cannot be selected, moved, etc.

  The file contains four layers. The task is primarily associated with a single layer. However, when I turn this layer or all the layers off the coast, only the part of the task inside the text box disappears. The part which exceeds the frame of text on the page and the remains of cardboard.

  The blemmish appeared during a crisis of sneezing (allergies) while I was working on the document. I touched or that you clicked on something, but I have no idea what.

  • I moved out of the page, the text block, and a new time, not linked, given. Most of the task moves with the original text block (everything that was inside the frame and the part on the outside). I made a new image and the task has returned - now in two locations: in full size on the page, and most of it on the block of text on the pasteboard.
    
  • I deleted the page, created a new page and created a new block of text. As I entered the new text, the task has reappeared.
  • I exported the File Interchange format. The task remained.
  • I deleted the default settings of InDesign and saved data files. The task remained.

  I can cover it with a full framework of white: However, I do not know if it will work in fact when the book is printed. And if this is the case, I can't delete the part that covers the text.

  Walton

  waltonm wrote:

  I've linked a copy of page problem here is a postal fold of the indd file packed; Therefore, the fonts are included.

  Walton.

  I exported the IDML file and also as RTF. Opening the IDML retained the task.

  Placing the RTF into one new file has also retained the task; even if the fonts were all gone, the glyphs appeared in applied fonts. A strange thing is that the police of DickChamberlainsDeathF na not show coloring and missing fonts in the menu drop-down police in Control Panel, there is no brackets around his name (parentheses indicate missing fonts).

  Someone at - he a clue about this strangeness?

  I exported the text file. The form disappeared when the text file has been placed in a new document.

  Then, I reapplied the fonts for the text - named police has been applied to all paragraphs in the police force. No character.

  The default size is 12pt. I've selected all the text in the frame and increased the font size to 15pt and BINGO! It's BAAACK! He remained as I unstapled each action step by step.

  I suspect that the task is triggered by a character in one of the fonts. It does not go away when the fonts are changed to fonts known to normal. If these fonts are not major fonts foundries creations, or if they have been changed by a scientist crazy fonts, the problem is probably a calculation error in the view of the police.

  If you want to really find the source of the problem, I would suggest to start with a new file, set the default to a known a type font, course new samples of text for a set of glyphs, copy and paste the glyph to make enough for your samples, and then save this file, and then save it under a new name. One, apply a suspicious police to a set of glyphs. Save under a new name that indicates the applied font.

  Open the first saved file, save it with the name of the second font that you want to test. Apply this font on the second set of glyphs. Save again.

  Browse through this routine until you have a set of files which have all games of glyphs, but that one policy applied to each file. If the task has not appeared, start back in the first file with a font applied. Select the text with the applied font and change the size from 15pt point. If that does not cause the problem, save the file as a new file with 15pt in name.

  Repeat this test for all files. If the task appears, you will have an idea of what font causes.

  If the task has not appeared, start over with the first file who first applied at 15 PT fonts, save it under a new name. Select the second group of glyphs and apply the second font. Record. If no stain, increase the font size of the second group of glyphs to 15pt. If no spot, save and repeat with all other files, apply the n - th police to the n-th glyph group. Save new names. Change font at 15 PT etc.

  If still no spot, start over with the first file. Register a new name. Apply every nth font in each group of the n - th glyph, in this one file. If this does not display imperfections, try the same strategy with the remaining files.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• HP 15 Notebook PC: Computer laptop screen has black spots and the green line

  Need help screen problem.  Have a black spot, down from the top of the screen a green line.  Have a black spot at the bottom of the screen.  A photo is attached.

  Can I fix it?  How can I solve this problem?

  

  Hi @JBBenson,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that you have a black spot, down from the top of the screen a green line. You can connect an external monitor to your laptop. If the external monitor is displayed well, it may be the laptop screen broken. You can contact the store local repair, or HP support by phone for repair.

  If you need to contact the HP support by phone, please the following link http://www.hp.com/contacthp allows you to create a folder for your problem and contact HP. If you do not live in the United States / Canada, please click on the link http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html to get contact information for your region.

  Let me know if you need more assistance.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. True or

  My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. Is this true? Thank you

  Sorry, but at least the screen needs to be replaced. Do you have the battery exchanged in the past?

  Visit an Apple Retail Store or an authorized Apple Apple Service Provider next to your place to achieve this.

  You can also contact the Apple Support to send it.

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

  Pricing of the service repair screen

  Repair and replacement costs depend on your iPhone and your AppleCare products cover model. Apple runs a diagnostic test to determine if your iPhone has suffered additional damage. If she has, or if she needs more repairs, you may have to pay out-of-warranty service. Accidental damage is not covered by the Apple one-year limited warranty.

  Model	Screen repair cost
  iPhone 6	$109
  iPhone iPhone 6s 6 Plus, iPhone 5 s, iPhone 5, iPhone 5	$129
  iPhone 6 sec more	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during testing. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from answer Service Center - iPhone

• Black spots on the screen

  Hello

  I noticed that my screen has several black spots or circles. Is this something known?

  Hello

  Contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty.

  https://www.Apple.com/support/watch/contact/

• How can I fix black spots on the camera in 9.3.5 iOS?

  How can I fix black spots on the camera in my iPhone 6 Plus? Please help me.

  You see the same locations if you take a picture out in the open?

  It's more like flares of the lens, because of the light coming from one side of the room and hit the lens at an angle. If so, it is an optical phenomenon and cannot be resolved.

• Black spot on the camera

  When I use the camera, a black dot appears on the right side (when you hold the phone horizontally).

  I took a few pictures, a few minutes before the black spot appeared. West nothing on the lens. There might be a microscopic piece of dust inside, but I HIGHLY doubt it.

  I ve heard from a few people that is probably not a physical defect, but a real question much experimented with iOS 8.

  I m using the latest version of iOS, but they also heard some experience the same problem there.

  Any suggestions?

  just to learn, put the dust on your camera and take a look.., well he cant focus just that close, but you may notice theres no way it is dust! However, if she still something to do with the material, as this would mean that the sensor burned some pixels, but this usually happens only if you cam laser or try to take pictures of real welding close or things like that... If you don't have these bad things to your camera, it could be the connector.

  But it is unlikely, even if I had exactly this problem of connector camera back in the day with my 3gs.

  But just because these newer iDevices use screws to attach the connectors its very unlikely!

  If the restart does not work try a little touched the phone and check if the point changes or even disappears. If who have some influence the sensor may be broken since you have this iphone or this is the connector as I have just said.

  If nothing changes by slapping, etc. shaking your phone you should try to restore your device via itunes

• Satellite M30-853 - vertical white lines or black spots on the screen

  Hello

  I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.

  The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.

  I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.

  I'd appreciate any suggestions.

  In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
  Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help.

• How can I make use of TC partitions and make sure that the file analysis is on the right partition?  I do not see the partitions that I have done in the Finder, but I can drag and drop the files in the folder 'Data' unique under Finder/Shared/TC.

  MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.

  Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.

  So far, I've implemented the TC and set up Time Machine on the TC.  I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.

  Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data".  I was expecting to see my two partitions here.  Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here.  I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?

  I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine.  How can I make sure that the file analysis is on the appropriate partition?

  I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen.  How do I point time Machine for one of the partitions?

  Thank you!

  In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.

• HP Laser Jet P2055dn: Black spots on paper

  I printed on one side of a piece of paper and place it in the tray to print on top of what I printed again. Since then, there are black spots to print on each sheet. We ran the cleaning mode several times and nothing changes. Where are the marks?

  The spots have been noted on a roll in the cartridge. Replacement cartridge and everything was good.

• LJ4000n - get a black spot (~ 1 ") all along the left side of the paper

  When you print a LJ4000n, we get a black spot, about 1 "thick, along the left side of the paper - see below.  Changed the toner, the printer has been cleaned (according to Chapter 3 - maintenance of printer in the user's Guide) and I've done 2 cycles of cleaning of printing ("create" & "process") Pages.  I'm at a loss!  Any help / advice would be appreciated!

  Fuser needs to be replaced. Open the back door, using a flashlight to check fuser and see to that the heater is damaged on the side in question.

• CS6 suddenly shows black spots?

  Today, I got some problems with CS6

  When I import a NEF file in photoshop some pictures suddenly get a black area

  On the bridge or Gimp of photography is how they should be... but in photoshop, I get this:

  

  If I change the channel from 8-bit to 32-bit mode, it looks fine... but I can not change anything...

  It will probably be a setting I missed or something... but I'm really stuck, I can't finish my photos in photoshop!

  Video drivers are up to date.

  Mode = RGB - 8-bit color

  I never had any problems until now... I really hope that someone can help me.

  What black spots are you referring to?  Only shaded areas are passed to the pure black?

  Mr.fox_NL wrote:

  Video drivers are up to date.

  You have an ATI card?

  There was a problem of ATI driver before 13.4 where any time the red channel would reach 0 color any would go to pure black.  The problem disappears if you choose Image - adjust - curves, and then lift the black point of the Red layer to 1 or greater?

  When you say that your video drivers are up to date, you have the latest version (catalyst 13.4) of the website of AMD?  The version of Catalyst 13.4 is generally one that solves the above problem.

  -Christmas

• Dodge and the combustion leaving black spots, grain

  I wonder if anyone can help understand me what I'm doing wrong here. I have a lot of trouble to Dodge/burn in the PS3.
  
  I tried several different methods, but I always end up with these very small black spots on the area, I'm trying to fix. It looks a little grainy. I tried to lower the opacity of this layer, using a very low opacity brush, and nothing works. I don't see what happens when I do the layer lighter, just at the moment where I hide him and then reveal it in one area with a brush. This happens when I do a screen or multiply layer hidden, a layer of recovery of 50% gray, painted using a brush of 20% (Scott Kelby), or a levels adjustment layer. I tried to do a first not pictured, as well as a later stage, and that doesn't seem to make a difference. I know I should try to nail exposure, but for those times when I don't have (or if I just want to clarify faces), I wish I could make it work!
  
  Here's an example of what I'm talking about. This is a close-up of harvest after using a layer of 50% gray to Dodge her face (with the layer opacity to 50%), but it is visible on an image full size view to 100%. Can anyone help? Thank you!

  

  Since you seem not to get these lines when you change the duplicate layer

  screen mode, your brush settings may be the cause.

  Try something like this:

  1. duplicate the layer and change the layer of the blending mode to screen.

  2. go to layer > layer mask > hide all

  3. use the brush with a round brush and painting with white on the areas you want to

  lighten.  (Make sure that no dynamics in the brush Panel is checked)

  4. use the opacity of the layer setting to vary the effect after painting.

  

  

  MTSTUNER

• color rich black spot

  Hello indesigners.

  an intense black to become a spot color if I choose to accompany the process color?

  and can a white or black become a spot colors or these 2 colors are considered simple shades?

  Thank you.

  All that will do is give the guy the press an extra plate - which is a complete waste of time and money.

  In printing, the colors are separated to CMYK plates, this is known as the printing process.

  For colors that fall outside the CMYK range (range of colours as only so many colors can be achieved by the mixture of these 4 inks), Spot colors, producing an extra plate, so you'd find you with CMYK + 1 Spot boards.

  There is no need to decide here.

  If you are using a new black color and change this to a Spot - then You ' l end up with 2 plates for printing - which is not necessary.

  You have even make a new shade - just choose 95% black for the color of things if that's what you want.

  If you do not understand this, I suggest that you talk to your printers and the guy from the press on how best to configure your color chart for the draw.

  For the record - 95% black is NOT dark black. Rich Black is a combination of a Cyan, Magenta or yellow with 100% Black - for example, 50% Cyan, and 100% black.

  And it does not need to be a Spot color - if you're not a spot color, and then the press will have to be around a 50% Cyan Ink and 100% Black - produce an extra plate, run an extra plate - and all this costs money. When it is completely useless. As they already use CMYK plates - so you can produce the Rich Black using CMYK plates.

  Yet once, if you don't understand that then I suggest you talk to your printers, go to visit them and get a clearer picture of the operation of the printing process.