Dodge and the combustion leaving black spots, grain

Similar Questions

• I click on "SET UP" on my Motorola XOOM and the screen goes black and does not settle. " I have uninstalled and installed the man times. What to do next?

  Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.

  By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.

  We are working to solve this with the creation of our Tablet UI.

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• My HP envy does not stop and the screen is black

  I tried to restart my laptop but it will not turn off and the screen is black. Help, I don't know what to do!

  Hey Raacbell,

  The ENVY Ultrabook series has a built in battery which can not be easily removed without disassembly.

  If you need to replace the battery due to regular wear of the Lithium-Ion battery on the road, you can see how to replace from page 35 here: HP Envy 4 - Maintenance and Service of Guide.

  Thank you!

• Change the resolution of the screen and the screen went black

  Then I tried to change the resolution of the screen and the screen went black.  I tried to restart, plug in my HDMI port on my TV... Nothing.  So I went with a system refresh (yes I'm sure it was a refresh and not a restore).

  The fact that there is no integrated procedure to detect the moment where that happens and return to the old resolution is annoying enough...  But now after that choose the system update and it would be only to reset the settings to default back and keep all the files (as he said it would be), I am extremely frustrated to know that it has deleted ALL my programs.  Program E-v-e-r-y.  This means that Chrome, Firefox, jGrasp, AutoCAD, all my programs Microsoft Office, all my Adobe stuff, my Visual Studio and so much more that I'm not naming.

  I REALLY hope there is a place where they were stored so I don't have to reinstall everything manually.  If not, then wow, Microsoft... We finished.

  Unfortunately a refresh as he said, only maintains personal records (program data), the data can be located in the "in the"Windows"folder windows.old folder normally C /: Drive, all modern apps should be kept."

  All programs of office/legacy (Chrome, Firefox, jGrasp, etc.) need to be relocated from their original sources

  Keep all of your programs, personal files (data), settings, the best option is to create a "Disk Image" - see link below for info.

  http://Windows.Microsoft.com/en-AU/Windows7/choosing-an-advanced-recovery-method

• I just cleaned the gills vacuum in my desktop iMac computer and removed and cleaned where is ram and now my iMac does not illuminate and the screen is black. My external hard drive turns on and I can hear it running, but that's all. Any ideas. I'm devasta

  I thought I was doing the right thing, but now it is clear that I was not properly clean even if I was very gentle. Why the screen lights up or really light up at all. Completely black and the keyboard does not light either. Someone has an idea? Thank you

  Unfortunately, vacuums are very statically charge and their use within electronic devices is usually not a good idea. It is very possible that the discharges of static electricity has damaged your iMac.

  I hope that you unplugged the iMac before cleaning. Make sure that the iMac is reconnected.

  Hold the Apple store nearest to the assessment of the iMac.

• I can't change the video resolution on youtube. When I try to change it, he goes to 240 p and the screen is black and does not play the vid.

  Hello, I have this problem.
  Recently, I have noticed that when I try to change the quality of the video by default 360 p to whatever, the quality will increase to 240 p and the video wont run. There will be a black screen.
  I tried to reset the browser and it has not fixed my problem.
  I tried the same video in internet explore and quality change worked normally.

  How would I fix this?

  Thank you

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

• Satellite L500-1XL - does boot and the screen stays black

  Hello

  I have a Satellite L500-1XL, when I turn it on the fan and lights and the hard drive light blinks several times then nothing, he's not going to the Toshiba screen remains black screen, tried ext monitor but still nothing.

  The fan always runs very quietly and the hard drive is running in, I put the hard drive in an another L500 and it is very good and can be accessed without problem, it has only 1 stick of 2 GB of RAM DDR3 and the other L500 I is DDR2 so I can't try to change the RAM. If I remove the ram should it beep or does only desktop computers do this? Mine does nothing when it is removed.

  Any help would be very useful, thank you!

  Hi gazzdowzell,

  If your laptop doesn t boot it seems to be a hardware bad working it could be everything, motherboard, BIOS, CPU, etc and it is difficult to say what exactly is the problem.

  First of all, I would like to try this:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work, please contact a service provider authorized in your country. If your laptop is under warranty, repairs are free.
  In addition if you remove the RAM and the beep of t n for laptop, it seems to be another problem. If you have removed the RAM module would be defective, the computer would have a beep.

  Good luck!

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• I have a TX2000 and the screen goes black when starting up - please help

  Purchased 2008 HP TX2000 Windows Vista 32 bit 2 GB memory

  Laptop trying to load Windows but fails when the lines are moving on the screen - the screen is black or with lines across and the computer is frozen

  We put an adapter on the hard drive, it is difficult to see just looks like it's all a part, you should be able to just pull the part plastic on the pins and that will let you plug your new case, I've experienced the same thing about 3 years ago, it really seems that it's just one piece... It should first come fairly easily, simply pull... Please let me know if it works for you

  Here's a photo I hope this can help, if it please click on accepted solution or glory, but only if I helped.

  

• Location and the size of area spot within a compressed file

  Hi all

  I'm working on an authorware program in which I want to use the size of years of a hotspot location clicked to draw a rectangle. Finally, I would like to be able to change the size and position of a point of interest, and when they are packed, the rectangle must belong to the new position of the hotspot, with the new size. So far, I've been successful in a file not packed with:

  GetIconProperty (@Title; #awSizeX))

  GetIconProperty (@Title; #awSizeY))

  GetIconProperty (@Title; #awLocationX)

  GetIconProperty (@Title; #awLocationY)

  where the title is the title of the clicked hotspot. So far so good... BUT I learned the hard way that GetIconProperty() does not work in a bundled file authorware (next time I will first read the help section better!). My question: How can I get the same information in a packaged authorware file?

  
  I was watching the GetSpriteProperty() function, which should work in a bundled file. However, the hot spots aren't sprites, and I do not know what spriteproperties should I use for the location and the size of the area reactive (#awSizeX, #awSizeY, #awLocationY and #awLocationX do not work). In addition, GetPostPoint provides the position of the upper left pixel of the hotspot, but I need separate the values X and Y position of the reach to be able to use the Box() function to draw the rectangle. And I need the hotspot as well. Finally, PositionY@Title and PositionX@Title do not work for my hot spots (the value is always 0 and does not change when you click on the hot spots).

  
  I could solve the problem by making all the position values variables and the values of the size of all the hot spots, but then I wouldn't be able to change the position and size of the hot spot by dragging and by changing the rectangle accordingly.

  I'd be more than happy to hear if anyone has a solution for me.

  Thank you!

  OK, after playing with the functions GetPostPoint and GetPostSize, I managed to do something that does what I want in a bundled file.

  My solution:

  posBox: = GetPostPoint (@Title; #response) - returns a list with [x, y] position

  sizeBox: = GetPostSize (@Title; #response) - returns a list with [width, height] size

  Box(pensizeBox;posBox[1];posBox[2];posBox[1]+sizeBox[1];posBox[2]+sizeBox[2])

  Hope that helps others to identical or similar problems!

• iPad Pro not responding and the screen is black HT6671

  I am an owner of Pro iPad with multiple daily closing down and the repeated failures to restart even with a "force restart."

  This problem has intrigued me for two days after I got my new iPad Pro (November 28).  It happens every day at least twice, and it is not unusual for the device to stay locked in his non-responsive State.  Often after trying a forced restart a dozen times, I give up the task.  A few hours later, once again after much, forced reboot a lot, he will finally meet.

  Apple engineers have been working on it since November 19, and do not seem to make any progress.  Should I ask for a replacement?

  Patti Harada

    You have 14 calendar days since your items are delivered to initiate a return as noted here.

• Could not watch television and the images are black and white on Qosmio

  Hi, live Saudi Arabia
  I have problem with my TV Tuner. When I scan the channel it is find frequency for some channels, but cannot look at them!

  also when I try to capture using model-SVIDEO color balck & white that I try to use PAL nothing changed
  And thanks for the help

  Hello

  One question; Did you purchse the notebook in your country?

  I guess that the black and white image appears on the TV. Am I wrong?
  This can happen if the TV doesn t s-video or if the s-video option is not enabled on the TV.

  In addition, I would recommend to check the version of the driver installed tuner.
  Then go to the page of the Toshiba driver and check the version of the tuner driver.
  If the new driver is available, so please download and install on the Qosmio.

• a sound signal and the screen goes black after start

  Hi, I have a problem with my HP G62 a38se laptop pc.when I start my pc after startup pc saying not to answer with 3 beep sound(beep...beep...beep).after it displays a black screen and goes restart... plsss help me for this

  You are able to access UEFI to perform material tests?

  Perform the start-up and testing of the long system. Please post your results here.

  Kind regards

  ERICO

• system freezes and the screen goes black or watch horiz lines

  When you use my laptop I'll hear a little wink (could be in the 5 min or 2 h) as his and my screen will go completely dark or display horizontal lines.  This crashes the system.  I am unable to do anything.  The only way to restart is a strong power down.  No idea what is the cause?

  Hello

  The first thing you think when you have lines, etc. on your screen graphics/video drivers are corrupt and we normally recommend that you download the latest drivers for your computer from the website of the manufacturer of your laptop.

  But you say that you receive a beep at the moment that the problem occurs, which suggests a hardware problem (loose connection, inverter, backlight connection while your screen is black?).

  If it is not corrupted drivers:

  If under warranty, contact the manufacturer.

  If it is not under warranty, contact a good computer repair workshop, local.

  See you soon.