BlackBerry App to connect to a drive does not

Similar Questions

• loss of connection to printer Wi fi - The WiFi Miniport driver does not work

  When you troubleshoot run he advises wi fi min port driver does not not, but won't let me not re-install a driver. I have a wireless printer that I must be usng like running my own business from home!

  says printer connected to the wireless network.

  Have been using cable but not practice as printer no scan & send directly to the pc using cable & I use option of analysis many documents, etc.

  What do you suggest me?

  Hello

  1. What is the serial number and model of the printer?

  2. are you able to browse Internet wireless?

  3 did you changes to the software to the computer before the show?

  4. What is the operating system installed on the computer?

  Steps to update driver Wifi Miniport Adapter:

  1. click on the Start button.

  2. in the search box type devmgmt.msc , and then press ENTER.

  3. Select the device Wifi Miniport Adapter, to the title of the network adapter and right click on it

  4. now, select uninstall.

  5 restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  For more information, visit the links below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista (this article is for vista, but can also be used for windows 7)

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://support.Microsoft.com/kb/283658

  Hope that helps.

• My printer driver does not connect to my new laptop

  Original title: too old printer?

  My printer driver does not connect to my new laptop it says my hp7150 is a usb device that is older and may not work with usb 3 try usb 2?

  Hello

  You should be able to operate...

  Did you install the software for your printer, or just plug in?

  You can actually have more luck with the USB 2.

  I think your laptop would have at least a USB 2 port. Glance to one that is not blue...

• My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF.

  My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF. That's the only reason I pay for access to Adobe Reader...

  Why used it allow me to do this? I have done several times before.

  Hi tinas,.

  Looks like you may be using an earlier version of the player, which now is no longer able to access the services Cloud of Document PDF. Please visit: Error Message: "Drive doesn't have the ability to access this service."

  You can download the most recent version, CD player, of https://get.adobe.com/reader.

  Best,

  Sara

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• Cannot close NB200 because of the win 7 not allowing WD drive does not disengage

  I have a NB200 with Windows 7 starter system. It will not stop because the relationship of storage WD drive does not have this.
  I can't find another solution that forced the shutdown.

  Can someone tell me how to solve this problem?

  Hello

  You talk to a connected external hard drive? Have you tried a remove security?

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• How to find on which device connected to my system does not work?

  I have XP Professional.  Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.)  In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?

  1. click on start and then click Run.
  2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
  3. in the Device Manager window, click view, and then click Show hidden devices
  4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.

  I hope that helps!

• Aspire 5552 laptop cant restore as CD-Rom drive does not now

  I've updated to Windows 10. I have discovered from Acer that my laptop is not compatible. Oops. I want summer to completely clean my laptop back to its factory condition that I had a few glitches and blue screens. I have the backup disks that I created when I got the laptop, but now my dvd drive does not at all. If not, how can I do this? Any help is appreciated.

  OK so I thought I would add this in that I just talked to someone from Acer support. They suggested that the first thing you can do is to roll back to Windows 7 by following the steps on this page...

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/37930/kW/roll%20Back

  Then, you use an external optical driver, use the recovery CD to take back to factory settings. I check on amazon and an optical drive is only £10-20 so might be useful to take just one punt on this.

  Hope this helps someone else.

• D: drive does not, could help you?

  inserted the CD into drive D: as usual, but now this drive does not work.  uninstalled how to reinstall diskless system?  Help, please

  At this point, the judgment of the pc, put off the power, plug the equipment in another IDE connection.

  set the pins plastic jumper accordingly, if the hardware is connected, if these pins

  also (master/slave), once through, the pc to start... XP will reinstall it now as "found new hardware"

  a drivers XP and install auto...

  Also, most cdrom/cdrw/dvd/etc material are updated firmware, go to her Web mfg

  site & install it youre only model number...

• My works wireless, but my connection to the LAN does not work?

  I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

  Hello

  Sorry I'm not quite clear about the situation.

  You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

  If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Iomega floppy drive does not work

  Floppy drive does not work. Always has.

  Hello Robert,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. What is the brand and model of your computer?
  2 floppy drive connects to a USB port and it does not appear in Device Manager?

  Thank you for details on the issue.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, use method 2.

  Method 2:
  If the floppy drive is displayed in Device Manager, I suggest you uninstall and reinstall the floppy drive and check.

  To Uninstall , follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  b. right-click on the floppy drive, and then click Uninstall.

  c. restart the computer.

  Floppy drive must be reinstalled automatically.

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• keyboard driver and the mouse does not, uninstall driver does not work, any ideas?

  Just bought a sony vaio and have the driver of keyboard and mouse not working, uninstall the driver does not work, no idea how to solve this problem

  Hello

  Exactly how you are trying to install the driver?

  We will analyze and identify the cause of the problem. You can connect a keyboard or an external mouse and check.

  Method 1: Hardware store.
  

  Run the troubleshooter of material and check if it works.

  Follow the steps to run the Troubleshooter:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, type Hardware Troubleshooter in the optionSearch .

  d. click convenience hardware store to run the troubleshooter.

  Method 2:

  You try to install the drivers on the manufacturer's Web site and check with the question.

  http://www.Sony.co.in/section/support

  Note: Search the driver by using the model number and download the latest driver.

  Reference:

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-in/Windows-8/why-isn ' t-windows-conclusion-device

  Hope this information helps. Response with status so that we can help you.