BlackBerry BBtorch 9800 unlocking smartphones

I have the unlock codes for BBTorch 9800, however, when I enter a code that has too many digits (16).  When I try to enter in these numbers, it doesn't let me, he says that the sim card is not valid.  The sim card needs to be active so that it works?.  Also, the former owner of the phone just locked on me and I need to unlock the phone or reset it.  How can I do this?  Can you help me?

Thanks,.

ksn16

Hello

I went to a website and pay $6 for the unlock code for my torch and was about 18 numbers... When you enter the code of the sim card you use shouldn't be the network you are on... it will specify that the sim card is invslid and then ask if you want to unlock the handset... answer you Yes... and then enter the code... you are normally only allowed to enter the 10 digits... and then it needs to be unlocked... If it is not try this site the link ok is bleow

http://iunlockblackberry.com/instructions/how-to-unlock-BlackBerry-torch-9800-unlocking-instructions...

Hope this helps

sacredminxxx

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Curve 8310 unlocked smartphones and software update

    If I update the OS on my Blackberry 8310 will it still be unlocked? It is marked as ATT but I use it with T-Mobile and T-Mobile does support not the 8310, so I'll have to install the update from att.

    Welcome to the skully13 forums

    No, the phone OS update should not affect your phone somehow. As a general rule, you can refresh using any carrier version as long as it's for the same phone model number. The only thing you need to do is delete the Vendor.xml file located in C:\Program Files\Common search in Motion\AppLoader before using Desktop Manager to do the update

  • BlackBerry Torch 9800 of Smartphones "email set up the icon does not"... impossible to change or set up e-mail accounts.

    Torch 9800, network provider, O2 UK.

    Even if my BlackBerry with O2 service is connected and works as usual, I'm totally without enamel on my Torch 9800. I've owned the Torch 9800 since March. Everything has been fine until last week when I changed the password on one of the 3 email accounts I had set up on my device.  This change of password remains one of the accounts cannot send or receive mail and is also brings me to discover I couldn't enter e-mail address set up on my device or via my site of network providers ( www.o2email.co.uk ).

    I spent hours on the phone with O2 debate this issue. The usual controls and procedures have been carried out, battery pulls, checking settings, etc. and service books were removed and returned several times. These actions have not solved the problem but rather leads to the loss of my other accounts Unit 2 e-mail which work properly but have now disappeared in the air. After trying all possible solutions with O2 I come here looking for an answer.

    When I visit my mail service BlackBerry network providers trying to create an account using my PIN etc, I absolutely do a pop up box with the message error "your account is not accessed through an HTML browser. Please use your devive to access BlackBerry Internet Service "!  The result is the same, that I connect from my camera on 3 G or wireless, or from a PC (tried several browsers).

    On my camera, when I click the icon email accounts in the menu setup that nothing happens, no answer at all. I tried several times and there is no way to configure or change e-mail accounts. I am without mail on my device and growing more and more short of patience.

    Now, I'm hoping someone here can give me some advice on how to solve this problem. What is a BlackBerry without e-mail capabilities? I see electronic research set up on the Torch 9800 that I'm not alone here so if someone to BlackBerry is to listen to the problems? If it's a matter of Torch 9800 so I am sure that you will do everything you can to solve this problem, but waiting to help by offering a solution to the problems mentioned.

    Thank you

    Welcome to the forums, bs342!

    Well, since you have searched the forums, you're probably aware that the problem you are reporting is unfortunately a common these days.  The good news is that RIM is certainly aware and are working on the problem.

    First of all, we will try something on your computer.  What browser do you use?  Your problem, it could well be as simple as to clear the cache of your browser, then closing and reopening the browser for the website to try again.

    If this does not work, try this:

    In the browser of your device, select mobile.blackberry.com. Select the country of your choice, then click Communicate > Email. Scroll to other personal e-mails and click on join now, then start the configuration of e-mail. You should be able to integrate your e-mail accounts in this way until RIM has solved this problem.

    Please let us know how it goes!

  • BlackBerry Torch 9800 of Smartphones 'mouse '.

    Any known for the Torch 9800 'mouse' that is not responding @ all?

    Hello

    I think you can try two things: the soft reboot, and if it does not, the hard reboot. Don't worry, you can not lose data with these two reboots.

    Soft reboot:
    1) struck the following three keys at the same time:
    -Alt
    -Right shift
    -Remove
    (2) wait 2 minutes for the Blackberry to wake up.

    Hard reboot:
    (1) your BlackBerry smart phone is on
    (2) remove the battery and wait a minute
    (3) replace the battery
    (4) wait 5 minutes for the device to wake up.

    Please tell us if it works for you.

  • BlackBerry unlock BlackBerry Torch 9800 smartphones

    How to unlock my BlackBerry Torch 9800?

    Thanks for this invaluable tutorial, let me divide these instructions one per line.

    1. Insert the SIM card
    2. turn off all wireless connections
    3. go to Options
    4. Select the device
    5. Select advanced system settings
    6. Select SIM card
    7. type MEPD (you will not be able to see what you type)
    8. type MEP2 (you will not be able to see what you type)
    9. now the phone will ask you to enter the network mep code
    10. Enter the network unlock code (you can get your unlock code from here)

  • Smartphones blackBerry Torch 9800 WiFi problems

    Just bought a 'unlocked' Torch 9800 from Amazon.  We are having a problem with the game facing upwards.  The WiFi signal is detected by the device, but we cannot send or receive e-mails.  When you log on to the browser, we can not go to the line, as it is said that it has turned on WiFi but not coverage.  I have contacted my provider "Three" and they say that, to their end, everything looks good to go.  My previous phone is a Curve 9300 that works very well, I'll have to use my old phone and it is send and receive e-mails very well with good coverage.  The abandonment of the cover guard torch its all very frustrating.

    We arrived at the conclusion that the problem is the phone itself, it has not been unlocked properly or we are missing something in the game upward.  If someone had a similar problem or you can shed some light on what we can hurt?

    Hello and welcome to the community!

    If you can use on the 9800, phone services via 3, then it's unlocked properly... but you can check here:

    Any BB can be used on any carrier that is running the same radio frequencies that the BB is capable of (and I have no idea if your in are such). But, to bring you a BB on a carrier network that they don't sell, there are several obstacles to overcome:

    (1) the carrier must say 'yes' to the fact... they are owners of their network and have every right to say what devices will be allowed to connect to it. If they say 'no', then it's the end of it.

    (2) you must be sure that your BB is properly unlocked since its origin manufactured for carrier... see this thread useful for more details:

    (3) you must get all of your voices works on the carrier, before you even try anything on data level services

    (4) you must be a subscriber of the carrier, a plan of sufficient data to enable BB exclusive services that you wish to

    5 (a) if the carrier directly supports your specific model BB, then you can proceed to the registration of the BB on their network, generating adequate for your BB service book delivery and treatment of the function. Since you didn't say that 3 you are on, I can't check to see if they support the 9800 or not... we do it, the other does not. But you can post via the official download portal:

    If your carrier lists the 9800 in their portal, then they take over the it and you should be good to use it on their network.

    5 (b) but, if the carrier does not directly your BB-specific model number, then the challenges are much more that most of the carrier's systems will deliver, for BB, the service books required to enable BB exclusive data services, even if you have subscribed to them.

    So, based on this, your BB may or may not ever any function on this carrier network. It can be quite difficult to achieve, especially if 5 b applies. Then take a look at this and decide how you want to move forward. Most people end up just buying a new BB if 5b applies.

    If 5A applies, then I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

    (1) registry HRT

    • KB00510 How to register a BlackBerry smartphone with wireless network
    • Please wait a 'registration' message reach your Messages application

    (2) Service reference books

    • KB02830 Send the directories for the BlackBerry Internet Service
    • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

    (3) restart to take batt

    • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! If this isn't the case, then you must keep workign with your mobile service provider as is their network with which your BB is unable to communicate, and only they can look "behind the scenes", as well as degenerating into RIM if necessary.

    Good luck and let us know!

  • Help with Blackberry Torch 9800 blackBerry Smartphones

    Hello

    I have 3 problems with my Blackberry Torch 9800 v6.6.284

    1 blackberry Protect does not completely upward and refuses the final 2% download

    2 and 3. battery flat yesterday and when I turned on it again, it was deleted Self appworld and BBM

    I tried to reinstall both, but appworld refuses to start (although it does not download, I can't access anything whatsoever), and when I try to download BBM I get an error message saying that the "operating system" does not support.

    I'd appreciate any help, please.

    Thank you

    N

    1. you see what module or Protect backup database is on at that time, where he fails?

    Before doing the following, do a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

    2. from your BlackBerry browser, go to the www.blackberry.com/appworld and download/install AppWorld.

    3. from your BlackBerry browser, go to www.blackberry.com/bbm and download/install BlackBerry Messenger.

  • Problems of blackBerry Smartphones with screen by dragging to the top of my Blackberry Torch 9800

    My carrier: three

    Operating system version 6.0.0.570

    Model: Blackberry Torch 9800

    I tried a battery pull.

    I'm guessing that whenever I slide my phone to the top of theres only a kind of contact fault because when I do, the screen goes black, as if locked. Although when the unit is in its default drag to the bottom of the post its perfectly fine. I have no idea what to do, but any help is appreciated, thanks.

    Looks like a hardware problem.  You can take it to the store or authorized repair shop?

  • BlackBerry Torch 9800 smartphones will no longer display the global icon

    Hello

    I have a torch 9800 and updated Os 6.0...  I live in Virginia and use AT & T Wireless.  I love this flashlight and want to stay with her, but I had some problems with an inability to reinstall the programs that I had uninstalled months ago... I would get an error when loading the program after you have reinstalled it.  I had read about it and I decided to not worry about this and passed without these programs.

    Now... Today I have app world?  I uninstalled and reinstalled several times.  Read many forums and even wiped the phone and reinstalled still no app world.  I you need help, because I had (thorugh installed app world) programs and would like to reinstall them.

    I currently have the Blackberry Torch 9800 3 g, WiFi with the Bundle 6.0 2647 (v6.0.0.600, platform 6.6.0.223)

    Any help is appreciated.

    JSanders message (last BONE 9800: 6.0.0.666)
    Options
    29/09/2011 12:10 AM) worked for me!

  • Case for Blackberry Torch 9800 blackBerry Smartphones

    Hi all

    Do you know if there is such a thing? I'm after a case for my Blackberry Torch 9800 a few times, I accidentally pressed buttons / touch screen etc.

    I spoke to someone on phone-4-U (it's where I got it since) and they said there is not yet.

    I prefer a good RIM/Blackberry marked one, but otherwise a decent 3rd party will.

    See you soon

    Woody-cool

    Check

    http://www.ShopBlackBerry.com

  • BlackBerry Torch 9800 BlackBerry Smartphones died today

    My old Blackberry Torch 9800 for 5 months with AT & T just died tonight.  I tried to recharge the battery and removing the battery to do a hard reset... nothing helps.  I noticed that twice tonight, it seemed resets automatically.  There no flashing red lights or any activity on the screen.  I made yesterday to sync it with my calendar at work and check the updates of the software... useless.   What do you think the problem is?  Thank you.

    Still under warranty, so had to replace it with a blowtorch "renovated".  It was the flame itself which is dead.  Hope this lasts.

  • Contacts transfer blackBerry BB 9800 to Z10 Z10

    Hello

    I have a BlackBerry Torch 9800 and I would like to transfer all contacts to my new Z10 BB

    How can I do it without recording all my contacts on my SIM card

    Thanks for your help

    Regads

    Gilles

    Hello gillesg

     

    Transferring content to your new Z10 BlackBerry is easy

     

    Bring your contacts, video, photos, apps and more from your old phone to your new BlackBerry 10 device can be fast and hassle-free, especially if you already have a BlackBerry ID.

    But before you start, download BlackBerry link of http://blackberry.com/software/desktop/blackberry-link.html. Click on a link below to navigate to the desired section.

    • BlackBerry link to download on your computer.
    • Connect your old device to your computer via a USB cable.
    • Follow the steps on the BlackBerry link screen.

    What will be transferred?

     

    With link to BlackBerry, you can transfer data that has been saved in the memory on your old device, including:

    • Contacts
    • Files (documents, photos, music)
    • Calendar items
    • Tasks and memos
    • BBM contacts
    • Folders and bookmarks in the browser
    • Alarm clock/settings
    • Text, SMS, MMS, PIN messages
    • Phone call logs
    • WLAN profiles (for networks of SMEs)
    • Entries in password Keeper

    If you have anything that is saved on your SIM card, such as address book contacts, be sure to first save these things to your device memory or media card. Who will follow they are transferred over the switch of the device

    Switching using a media card devices

     

    For users of smartphones BlackBerry with BlackBerry OS 7 and later versions, you can switch devices using your card.

    • On your old device, tap search and type switch of the device in the field.
    • If you are running BlackBerry 7.0 or later, the installer appears in outcomes research.
    • Click Setup > Switch Device > using a multimedia card > Save data and select continue.
    • When all of your content is saved in a backup file, remove the media card and insert it into your new BlackBerry 10 device.
    • When the screen appears on your BlackBerry device 10, type your password for the backup file and elements will begin to transfer to your new device.
  • Phones smart blackBerry Torch 9800 problems of advice?

    I have a Blackberry Torch 9800. There is something wrong with it and it's not just one thing. For example;

    When I click on App World I get a popup saying cela "to continue using Blackberry App World, you need to upgrade your current version. For more information, visit www.blackberry.com/appworld/support. "I have two options after that. 'Upgrade' or 'close '. Sure of 'Close' to close the message and does nothing. 'Upgrade' does nothing either, when you click on it... nothing... no Web site don't transfer anything. It is a big problem because I can not update my current applications or download new. My really outdated phones... and the App World isn't the only app that does not work properly. There are a couple of other apps that don't work properly either. How should I do to correct these problems the right way? A full system scan?

    Thanks for your time and your support.

    Try to reload your operating system. This reload BlackBerry World as well as the rest of your phone. To do this, connect your phone to your PC and open BlackBerry Desktop Software. Once your phone has been recognized, click device at the top of the software, and then click on restore. Choose the most recent restore point and the load. That should solve your problem.

    Let us know if that helps you.

  • BlackBerry Bold 9900 of Smartphones with the MEP 0 left tent code. Blocked network

    Hello

    I have BB bold 9900 I want to unlock to another service provider. The number of MEP code is up to 0 tests (long story why that happened). I understand that service providers are unbale to unlock and this because it is possible that now by RIM.

    Who do I contact in order to unlock the network stuck in idle.

    Thank you very much

    David

    Hello and welcome to the community!

    Please see this thread useful to start:

    If you have exhausted all your chances to enter the correct unlock code, is there nothing more, that you can do. Even if you happen to have the right code now, it is useless. Only the factory can now (legally) unlock your BB. In general, I've heard that the cost of having BlackBerry do this for you will be higher than the cost of just buying a new. But, you are able to ask them... see here:

    Note, however, that this process will begin with a tax...

    If you obtained your unlock code from somewhere, but it was incorrect, that your remedy could be with them - however, they may well wonder why you exhausted all 10 attempts before contacting them.

    If your BB was already locked MEP and you got it from a source that represents as that can be unlocked, then your recourse would be with the seller that you got it.

    Good luck!

  • BlackBerry BB Storm 9530 Smartphones - SIM card to use in Ireland

    Hi, I have a Storm 9530 in large part unused for several years. I had Verizon.  Can I consider in Ireland and get a SIM card it for use as a mobile phone only to make calls to the Ireland and receive calls from the Ireland and the United States, also?  (I'll take an iPhone, using for the WiFi only).  I have to clear this with Verizon?

    Hello and welcome to the community!

    There are several factors to consider... because you intend to use a local SIM card, then roaming does not apply (in other words, you don't need 'Permission' VZW).

    First of all, your device must be unlocked to the Association so that it can run on any other carrier at all... refer:

    Second, you must be sure that the radio technologies and frequencies that supports your device are compatible with all other networks of carriers that you want to use operated with. You can search for your device here features:

    But you have to look on the Internet about what the carriers available in the places you want to work with.

    Since you intend to only level of voice services, there is no problem with any BB exclusive service requirements... which would introduce a completely separate level of complexity, but it should before satisfaction of the above anyway.

    Good luck and let us know!

Maybe you are looking for

  • Satellite L505-141 - recovery disk contains Windows 7 32 bit

    Hello I bought my computer in the year around March last. I had with laptop computer operating system is Windows 7 Home Premium 64-bit. Lately I think the format of my laptop using the recovery CD that I have receviced with the laptop. I don't know w

  • How can I sort compilations in iTunes 12?

    Hello world. I find just that if you check the box "compilation" and leave empty the label of artist Album, iTunes recognizes the songs like "Various artists". That's fine because knowing that I don't need to manually write "Various artists", not mor

  • convert loop timed to normal while loop

    How convert a while loop time normal while loop with exact same properties and performance? I have donot need to worry about the exact date. But it takes the timed loop time will be run similar to loop. And also, is there any issue encountered when w

  • 2000z-400 HP PCIe device driver not found on the HP site

    HI -. Equipment: HP 2000z-400, S/N: [redacted], P/N: A1L49AV. Clean install of Windows 7 Home Premium 64 - BIT. All THE Windows updates done. Go to: manage devices. See: "other devices" / PCI device = not installed. Go to the HP site for this model/d

  • fan made a thud

    I have a HP Pavilion a1340n, I replaced the motherboard with (motherboard MSI g31m3-f v2 model) but the fan made a thud, I have not problem with my pc it works fine but the fan noise is strong)