BlackBerry BlackBerry Z10 NUMBER of MAC

Similar Questions

• BlackBerry Z10 Wifi disconnection and deactivation

  Topic: Drops wireless connection and disables wifi radio on TP-LINK router 470N (single band - 2.4 GHz) (Home connect)

  Hello

  I'm Jay payen

  Recently, I have owned BlackBerry z10 and have the latest firmware upgrade version: 10.2.1.2102 updated.

  I am Using Wi - fi Connection to connect the app on my phone, but since I started to use BlackBerry z10 he constantly sinks in connection with home wifi router in addition it also disables wifi radio so that even make any another device branch ed on this router disconnected to the router. Solution is to this problem is that I have to restart my router every time.

  I tried to change due to changes in my router:

  • Mode: since 11bgn mixed with 11n only
  • Enabled SSID Broadcast
  • Wireless security: of WAP-WAP2-staff staff
  • Beacon interval: 100 to 50
  • RTS amplifiers: Of 2346 to 2304

  I am friends here from my phone to the router address reservation.

  Note: My router has the latest Firmware Version: 3.16.6 build 130529 Rel.47286n (v4.0000 H/W Version WR740)

  I use Sony Xperia Acros, HP ProBook 4440 s, Sony Vaio portable Devices in parallel, or any hour would not be problem with connection of abandonment until.

  So, please help me about this situation.

  Modification of the Ant / changes / suggestions are welcome.

  My router configuration:

  • Wireless Radio: turn on
  • Name (SSID): XXXXXXXXX
  • Channel: Auto (canal 11)
  • Mode: only 11n
  • Channel width: 20 MHz
  • MAC address: XX-XX-XX-XX-XX-XX
  • WDS status: disable
  • Beacon interval: 50
  • RTS threshold: 2304
  • Fragmentation threshold: 2346 (fixed)
  • DTIM interval: 1
  • WMM enabled
  • Persons with disabilities in isolation AP

  WAN connection type: PPPoE (AutoConnect)

  Phone settings:

  • Enable connections
  • Hidden off SSID
  • WPA/WPA-personal security type
  • VPN profile
  • Type of band 2.4 GHz
  • Auto obtain IP - on
  • Using Auto-IP - verified
  • IPv6 disabled
  • Proxy disabled
  • Access point inter Handover - on

  Please help me get rid of this situation.

  Thanking you.

  Good day

  Greetings - Jay payen

  Hello!

  Try turning off WMM, it should help you

• BlackBerry Z10 BlackBerry Desktop Software does not support the BlackBerry 10 operating system

  I am wanting to sync the Z10 with my Mac andhave times link BB and BB Desktop Software but the message it gives me is:

  This BlackBerry device running the BlackBerry 10 operating system.  BlackBerry Desktop Software does not support the BlackBerry 10 operating system. Visit www.blackberry.com/support to learn more about how to synchronize your multimedia files, backup and restore data from the camera and more, with your device.

  All software are up to date on Mac and BBZ10

  What should I do?

  You have the two desktop software and link configurΘ for dΘmarrer when a device is connected to your Mac. You must go into the Desktop software settings (I don't remember exactly what to do, but there should be some settings at the top right) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that the link is set to open. That should solve your problem.

  Let us know if that helps you.

• BlackBerry Z10 of different Notification for different e-mail accounts

  On my old blackberry, I was able to set up a different number of vibration for my different e-mail account so I would know right away, who represent the email was on.  Is it possible to do the same thing on the Z10?

  Hey hinjeyan,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  Currently you are unable to set up notifications for different e-mail accounts on the BlackBerry Z10.  There is no estimated time when this feature will return.

  Let me know if you have any other questions.

  See you soon.

• BlackBerry Z10 impossible access contacts or messages and the non-existent hub

  I got a Z10 now and during the installation I noticed that if I clicked on the "contacts" or "text messages'icons are not." I thought when I transferred all the data from my old divide that would correct itself, but it does not.

  None of my contacts or forwarded messages, and I Redid the transfer twice. My call log was transferred, but all entries are number only, no names. And I can't seem to be able to add these numbers to my contacts. I can't even enter the contacts and enter all my previous Info manually.

  I have no hub blackberry either and I asked the people who are in the same room to send me messages but I don't get them. I tried to reboot the device several times but nothing moves. I seem to be able to BBM surveys send, but not receive them.

  Seems that the only thing I can do is to make and receive calls and use the internet browser.

  Can any ideas on how I fix? I will go back to the store I had the phone of the future, but really looking for some information at this time if possible.

  Thank you.

  G

  Hi G and welcome to the community of BlackBerry Support Forums!

  Have you made software updates on your BlackBerry Z10? If this is not the case, there may be one available. You can do the update through the BlackBerry Link with your device, or by going to settings > software updates on the device itself.

  Thank you.

• BlackBerry Z10-text to enter in contact with multiple numbers

  Hello world

  I need a little help with sending text messages from my Z10. First some info about the phone:

  • BlackBerry Z10 (STL100-2)
  • OS 10.3.1821 (Beta)
  • Softwareversion 10.3.1.522

  And here's the problem:

  Lets say that there is a contact - by the name of Bob - who is listed under its full name under my contacts ("Bob Miller"). This contact has three different cell phone numbers and a normal (private) phone number. When I try to send a text message, I can choose only "whole" contact ("Bob Miller), but cannot choose the specific telephone number where the text message should be sent to. There seems to be no option to develop the different numbers of contacts.

  It's a fault in regard to the beta-operating system or what I really need to enter all of the numbers of all my contacts respectively as single entries?

  Thanks for your support (and have a good start in the new year)

  Blase007

  Perhaps, I do not understand. Here's what I see. I'm leaving the hub. Select a dial. Select text. Enter a name. All (by type) phone numbers and email addresses for this contact are listed in a drop down below the name. I record the mobile, etc.

  What you do see, how will you choose a number, and what happens when you try to select a number?

  I'm under PassportSQW100-1/10.3.0.1418 by the way.

• BlackBerry, BlackBerry Z10 Z10 - battery drains very quickly even in sleep mode

  My BlackBerry Z10, model number: STL100-1 v10.3.1.1565 of running operating system is suddenly cause battery drain issues. Earlier it used to happen very often that the battery begins to elapse without reason to a very fast pace, say, 100% to 20% in 2 hours standby.
  From last 3-4 days, which happens all the time, I'm charging my Z10 to 100% and the battert runs in an hour or two with the phone gets hot as hell. Seriously, the temperature of the phone rises as it is boiling. It wasn't even a year and I am facing this problem. I was never tired of BlackBerry despite its app support deficiency compared to Android and iOS smartphoned but now I want to throw the phone in the river.

  What Android apps you have installed?

  Try first, do a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

  Look at your device sometime and see how it goes.

• BlackBerry Z10 video BBM for unlimited plans, AT & T

  I'm sure that this topic is here somewhere, but I can't seem to find it. (Please direct me there, if so)

  So, it doesn't seem to be consensus on who this works for and who is not as shown here:

  http://forums.CrackBerry.com/BlackBerry-Z10-F254/t-blocking-BBM-video-voice-over-mobile-networks-905...

  But here's my question. I have an unlimited plan excluded on AT & T.  But I can not activate video calls through BBM surveys. It works fine on WiFi but not on the network. If I try, I get a message that reads "contact AT & T to activate. And, on the settings tab in BBM, the cursor "Allow calls from BBM on Mobile Networks" is grey.

  Thus, after contacting AT & T, they told me similar things to what is mentioned in the announcement of Crackberry - that I have a tiered plan or shared use Videotelephony.  My questions are the following:

  -is that someone here with an unlimited plan from AT & T be able to use video calls when not on WiFi?

  -does anyone know IF you use file manager or something sideloaded it you to get around the restriction?

  -are there someone who has an unlimited plan with AT & T AND has updated for Mac OS 10.2 with Knowyou or something, which is able to use the BBM video on the network? (EDIT: changed 10.3 to 10.2)

  Well, well, well. Just as I was trying to tell the idiots with AT & T technical support I talked with, before the problem was with them all along - not with my plan.

  So, if someone follows this and wants to update...

  Short version:

  If you have an unlimited plan AT & T LTE for your BlackBerry, you can ABSOLUTELY activate BBM video. I do now. If AT & T tech tells you different, they're wrong.

  Full article:

  I have an unlimited plan, my wife has a tiered data plan. Video BBM worked well on both our WiFi phones, his BBM video would work on network, but mine wouldn't.

  I started in my retail store, and the guy who usually helps me didn't know what I was doing wrong. So, we called technical support. AT & T first told me they didn't know why it wasn't, given to me to try different things, power off / on, without success.  So they sent me to the BlackBerry support.  After a few long conversations, which essentially ended with "Yes, this is not our problem, which is AT & T business."

  So, I called AT & T tech support again. They told me on the phone that I can't use this feature with unlimited and should be changed to a share of mobile or tiered data plan. I said, 'nope' and decided to cool it down and try again later.  So, then, I had an online chat with a representative of the AT & T technical support who told me the same thing. She said that the BBM video wouldn't work on unlimited and I needed to change. I told her firmly that I change my plan and my initial agreement for the unlimited understand not having the features are disabled. She told me that AT & T had the right to control their network, but that they wanted. (nice) So, I finished this cat.

  After doing some web browsing, to post here and other forums, with all sorts of mixed responses, I came across this article by the yard by Adi Robertson http://www.theverge.com/2013/5/20/4348672/att-will-allow-all-video-chat-apps-on-its-network-by-end-o...

  On a whim, I sent him, and he wrote, "Yes, uh not.» AT & T has not activated it for BlackBerry on unlimited plans. "She contacted back, then contacted his connection to AT & t. yesterday, I heard from someone at the Office AT & T President, whatever it is. Fast forward... your da! Suddenly, a technical support could enable this feature after all.

  I still have my unlimited plan and video BBM works simply great.

  Now, if only I could get AT & T for Mac OS 10.2 version...

• BlackBerry Z10 controls BBM messaging question Questons?

  I use voice control on my BlackBerry Z10 to try and send a BBM message to my wife on his BlackBerry Curve 9320. I added him as a BBM contact. But the voice command tells me that his name is not a BBM Contact when I use it. So I'm not able to do.
  I used the voice command to send SMS text message and dial his number and his mail without problem. Is there a compatibility issue? Can I use BBM without voice command to send a message, but also to voice chat.
  10 blackBerry OS 10.0.10.85
  Virgin Mobile Canada in Ontario
  Your help is greatly appreciated thank you.

  BlackBerry link to restore and update my BlackBerry Z10. Works fine now!

• Card transfer multimedia blackBerry Z10

  I recently transferred my 9930 for the Z10 files via my media card. Now, I would like to remove any non-media card so that they are not consume space. This work in connecting with Blackberry link and simply removing the files from the card I don't want there? When I saved the Z10 link BB I don't see a way of looking at the map on the screen of my Mac media. Also, should I still keep the old BB Desktop Software on my computer? The Z10 using the BB link exclusively to standard processes?

  Hi legacymusic,

  You can turn on the BlackBerry Z10 smartphone mass storage mode and display the map of media on the MAC as a removable hard drive. On the Z10 BlackBerry smartphone go to settings > storage and access > USB Mass Storage.

  I hope this helps.

• BlackBerry Z10 Help! OS 10.3.3.746

  best regards, I have a problem and you install a beta on my blackberry z10 stl100-2 and now I can not degrade the official version
  

  Do you mean that you have installed the beta on our device?  Let's be clear, the BlackBerry does not have beta versions of developer to the user.  You have installed.

  You will have to wait until the official release.  Everything I read, you cannot downgrade to an official release.

• BlackBerry Z10 antivirus

  a good free antivirus is available for blackberry z10

  You'll have to sideload if from here.

  Here is an Antivirus on the BlackBerry App World, but it's not free.

• BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

  During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

  During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

  Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

  Is there a way to set the default device for different outputs.

  for example

  Use the mini as the audio device output by default when the music plays.

  When I get a call, use the headset as default device bluetooth for phone calls.

  When I hang up, swinging back to the mini taken (because it is the default device for audio)

  In addition,

  I ordered the bridge thinking music that he could solve my problem.

  Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

  Should be able to assign the bluetooth services specific to the results of the default value.

  for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

  Calls > bluetooth headset.

  Hope that makes sense.

  Dave

  The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

  The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

  I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

  Read this new thread to see the solution to this new problem, if it still exists.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

• BlackBerry Z10 is stuck inside the camera!

  On the z10 blackberry, sometimes you can't get out the camera... for some reason any the shot does not do anything and you're stuck out there. The only way out is by clicking on the photo album and then get out of there!

  BlackBerry z10 is full of bugs!

  Hey everybody. We will all stay on the topic and helps answer that the question has been addressed initially. Thank you! ~

• Reloading the blackBerry Z10 Z10 software stuck on logo Blackberry, continuous restart loop, did not help...

  Hello

  Here to find the solution for my beloved BlackBerry Z10 STL100-3

  One day, precisely 26 May 2016 my Z10 battery Blackberry went below 5% or something, I rushed to connect it to the charger but before doing so; It is just off. I plugged in the charger for several hours, but it went to reboot mode as he went to the course passed. It just kept flashing empty battery symbol.

  Problem: BlackBerry Z30 stuck in a reboot loop

  Comments/Details:

  1. when it is connected to the wall charger, the red LED flashes for a few seconds, the display shows "BlackBerry" name. After that,.

  a. device either goes to a restart mode, the icon reload Blackberry OS, the charging progress are shown and about 60-70% progresses he new go to the mode (flashing empty charging symbol) load

  b. or device is standing right in the mode, load with screen showing beteer empty, load, seeing to the top flashes still with the typical color of LED for empty-drained/low battery levels.

  2. keep on charging for several hours, or even overnight will not help to restart. And he remains in charge mode with b symptoms of "scenario". Start button / stop fails to start the machine and after several attempts, it flashes only 'Blackberry' on screen and again charge mode.

  3. as soon as the connection to BlackBerry device link gets detected for a few seconds. And the screen displays the name of "Blackberry", "scenario one" described above occurs. And he just repeats.

  4. that the device is detected for a few seconds, being fast enough to select the option "Reload" when Blackberry link shows that it connected returns with the message "software update has encountered an error.

  After meeting thiis reboot loops question on 26 May 2016, I searched rigorously blackbery support forums and other web pages a di a factory reset/software reload on my device. I lost all my data, but did not care as I wanted my Z10 back to life.

  Now its been 2-3 months I see my Z10 stuck in restart loop and hoping that maybe it lights up or I will be able to find the solution.

  Kindly help.

  Hi J Sanders,

  Z10 was connected to the wall charger and all the tips/advice you mentioned have been tried. He could not start device.

  Before trying the ADF, to check if battery is dead or defective; I kept it in my brother Z10. The battery was load and after a while, he turn the unit on its own.

  However, the pile of work of Z10 my brother could not initialize my camera. I guessed corrupted software connection or the battery could be a problem.

  I carefully observed battery connection ports, specifically the part that establishes the conncetion of metal tabs of the battery with the unit (given in the image http://www.gsmzone.co.uk/Blackberry-8900-Z10-Battery-Connector).

  I found one of the metal connector stuck / out partially / fits loosely / spring-movement irregulars / and is not able to communicate perfectly with the metal strips of the battery.

  I tried to solve this problem by manually removing the metal connector. After several test, I managed to do it.

  I put my battery in my Z10, he acknowledged, and red LED flashed, name BlackBerry flashed, Blakberry OS Reload icon flashed-has increased 100%, Blackberry 10 name flashed and Z10 began. Device came to operational status.

  Current operating system version is 10.3.2.2836.

  No SIM or media inserted in it.

  Charge the unit and check if all functions work fine.