blackberry camera control

Similar Questions

• Internet Explorer 8 and cannot run the AXIS ActiveX camera controls in streaming videos

  While I can't verify this with certainty, it seems that since I upgraded to IE 8, I can run no longer videos using the camera AXIS ActiveX controls.  I get the error: "The AXIS ActiveX Camera Control, which allows to display live image streams in Microsoft Internet Explorer, can not be saved on your computer."  I checked under Tools-> Internet Options-> click the Security tab and then activated or has requested to be invited to everything related to the ActiveX and it does not clear the problem.  Oh and I'm running on XP.

  Thank you.

  Hi nbundy,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP and would be better suited to the XP community. Please visit the link below to find a community that will provide the support you want.

  Forum XP

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• C40 Camera control maximum length of cable RJ45 to d - SUB

  Hello

  What is the maximum cable length for the control of camera on a Cisco C40 port?

  Thank you

  Kyle

  According to the PrecisionHDMC camera Guide, page 17, the camera cables that usually come with codecs can be 5, 6.5, or up to 20 meters.  Anything more than 5 meters requires the camera powered by the power of the camera and not the codec using the camera control cable itself.

  I have a few installs custom where the camera control cable is well up to 75-100 feet.  Just follow the outputs pins on the same page as above to make your own cable and don't forget to use the POWER-CAM-V = power supply to power the device.

• Windows version of Remote Camera Control Ver.3.2

  Which models are compatible with sony of tethering software (version of Remote Camera Control Ver.3.2, or a later version of Windows)

  Version 3.2 of the remote camera control software is compatible with the following models:

  • ILÇE-5000
  • ILÇE-6000
  • ILÇE-7
  • ILÇE-7R
  • HI - A58
  • HI-A99/A99V

• Multiple camera control

  I can control several hdr as15 both with the remote application?

  Hello

  The PlayMemories Mobile application is designed to work with one device at a time. Use it to control several Action Cams at the same time is not supported.

  If my post answered your question, please mark it as an "accepted Solution".

• The movement of my robot can be controlled by the entry of a camera control in labview?

  I'm new to mindstorms and I'm trying to interface a camera that I can easily control in Labview with the NXT unit movement.  I want this to be real time.  What is the best way to get Labview to send commands that get immediately updates implemented by unity NXT?  Thank you.

  Sorry - fact.  Thank you.

• Q10 blackBerry camera does not work after upgrade Q10 to 10.3.1.1581

  I've upgraded to the new operating system on the weekend and I love the new screens and functions - except that now all my camera does not work, can't take pictures (movies are OK).  I tried all settings, no combination it will do the job.  Restart the phone does not work.  Any suggestions?

  I would like to peform a security wipe on the device.

  To perform a security Wipe please follow the instructions below. Don't forget and allows to do a full backup before erasing all data will be erased when the BB link wipe:

  http://www.BlackBerry.com/BTSC/KB33591

  Once the wipe is complete, you can restore your backup. Remember that the data in the backup can be the source of the original problem and restore can restore the problem, as well. To compensate for this, I do not recommend restoring the passage of the backup settings.

• Q5 whaen question upgraded to os 10.2.1 suspended blackBerry camera

  HI1 feb on28th what version 10.2.1 I upgraded my Blackberry 10 on it after upgrading my camera is suspended and no photos I restart holding my camera. but it doesn't take no change camera does not work. and there we more I m having model q5 blackberry only. SQR100-3 nfc does not work it shows that NFC is not supported by your device. Help me im in trouble.

  If you change to a different location to save does help?

• BlackBerry Z10 controls BBM messaging question Questons?

  I use voice control on my BlackBerry Z10 to try and send a BBM message to my wife on his BlackBerry Curve 9320. I added him as a BBM contact. But the voice command tells me that his name is not a BBM Contact when I use it. So I'm not able to do.
  I used the voice command to send SMS text message and dial his number and his mail without problem. Is there a compatibility issue? Can I use BBM without voice command to send a message, but also to voice chat.
  10 blackBerry OS 10.0.10.85
  Virgin Mobile Canada in Ontario
  Your help is greatly appreciated thank you.

  BlackBerry link to restore and update my BlackBerry Z10. Works fine now!

• BlackBerry camera App 10 remember gray

  After the 10.2.1 update I can not access my camera directly from the app to not forget. The symbol is just gray. Reboot and the traction battery did not help. Anyone have the same problem and found a solution?

  The solution for me was to switch on load the parent control turning the camera off. As soon as I did back off the camera in the app store was back to be fully functional.

• Smartphones blackBerry camera does not

  My camera torch has randomly stopped working. I used one day and the next day it wouldn't work. It will work from time to time, but most of the custom of the time. I tried to remove the sim card and the battery, I tried to update my phone (the guy at my place bell store told me to do, he saw also a lot), but nothing works. I would really like to find the answer to my problem without sending my phone away. I have three years warranty, so I'm not worried for repair immediately.

  Hello bowersalecia and welcome to the community of BlackBerry Support Forums.

  You can run a self-test for your BlackBerry, as shown in KB16037 to test the camera to see if it is a related software or hardware related.

  If it is hardware related, then you will need to contact your mobile operator for the repair of the equipment.

  I hope this helps.

• Helps the camera control

  Animal crackers, trying to control the cameras in AE is crazy crazy and intuitive.

  I can't turn around an object, from the point of view itself.

  After some modifications, the rotation parameters seem to sense, as if they were in a sort of gimble lock.

  Someone please tell me something good...

  I'm just trying to create a simple camera on a 3D text movement.

  Element of learning 3d, just the layer of the element with a default camera...

  Thank you

  To make precise camera moves, on the set, I put the camera on a Dolly, move the carriage and change the way the camera points. Make the precise moves camera AE I have parents a 3D 'dolly' null for the camera first now buy the SHIFT key if null and the camera are in the same position, then I cancel parenthood and to the "dolly" the parent of the camera so I can move the camera with the null value.

  Then I add a 'focus' null in 3D to the timeline and set the point the camera of interest to null with an expression. I also attach focal distance to null to an expression. Now you can adjust and animate the camera position to the value null in the arrow pointing upwards or downwards, move the carriage to move the camera and animate the null of development to address the development and where the points of the camera by using the null object. EZ PZ.

  I don't have the time to show you the expressions but they are pretty simple. You set the point of interest as you drag the pickwhip. Length allows you to set the focus distance.

• BlackBerry camera classic non-runner

  Just got my classic and I am pretty happy with it. A weird rider with the camera, so: first time I tried to open the camera, I had this weird opinion "Has no change in Flash mode", and I can't spent to operate the camera at all. Frustrating, because I still absolutely did nothing with the camera, so it couldn't be my fault early in the game. the unit should work straight out of the box, right?

  All sound advice? I'm sure it's something simple but, as I've never tried to change the flash mode, I can't understand how do to undo what I did not first ;-)

  Thanks in advance.

  Victor K

  Wrap: a case classic (no pun intended) of a faulty device, nothing more than that. I took it for T-Mobile, they have restarted all the apps and were able to recreate the same problem I had: the camera just does not open.

  They quickly to replace my classic with another identical device, and I came out perfectly happy with the result. Congratulations to T-Mobile; No grunts and groans, no worries. Unit malfunction just happens...

  The 'teachable moment' this whole experience: to restart applications, press and hold 'Up' and 'Down' - volume buttons on the side.

• Q10 in gray blackBerry camera setting

  Hello. I need to change my settings storage camera on my q10 running 10.2, but I have the camera app open, then I swipe down to bring up the taskbar settings, the settings button is dimmed and I can't select it. Any ideas?

  Restart your phone and check

• BlackBerry Q10 controls how many times my Q10 synchronizes with my account Gmail

  I can't control how many times my Q10 synchronizes with my account Gmail. I have adjusted the settings of Gmail, calendar, and Contacts on several occasions, but it seems to pull emails frequently (less than an hour) regardless of the setting. I want to control the synchronization manually. What Miss me? The phone is brand new and unlocked, running on AT & T, and this happens regardless of whether I use WiFi or not.

  Thank you!

  Hello and welcome to the community!

  A few possible variables...

  (1) what have you set to "use push if available.

  (2) how exactly the GMail is integrated? EAS? IMAP? POP?

  If the answer to article 1 is Yes, AND you have integrated such as IMAP of GMail, the time interval setting is ignored. If integrated as EAS, it can also be ignored as well as the "use push...." "setting can also be ignored. If integrated as POP, then there is no Push, so your time interval settings would be used.

  Thus, depending on the combination of factors, it may or may not be doing exactly now what it should be.

  Good luck and let us know!