Windows version of Remote Camera Control Ver.3.2

Similar Questions

• Remote Camera Control (RCC) & intervalometer A7

  1. why RCC software developed only for laptops? Who wants to carry laptop to the field? It is not practical at all.  Please make it work with mobile devices: phones, tablets. Which means he has to work with Android and iOS.

  2. the application of time is nice, but it does not work for bulb mode. If the user wants to take more than 30 seconds, for example, star trail, this app is useless.  And the shutter release sold by Sony which cannot either.  Please include in the next firmeware update.  I think Nikon has done that Sony should too.  Don't make users feel regret the purchase of Sony product, in this case, A7.

  Thank you very much.

  P

  I installed the app, but again, he can't pull anything more than 30 years, so it does not help with the bulb mode.

• Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control

  Running Vista Home Premium 64-bit.  I rent a cable box so I can get some programs at the 3-digit level.  When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward.  My problem is the next step and change the channel using the Windows Media Center remote control or keyboard.  My keyboard or the WMC remote will change the channel.

  I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.

  Could someone please help me with this?  Thank you in advance.

  Hey kansascitykid,

  If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:

  ·        The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.

  ·        The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.

  ·        IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.

  • Center cannot send a signal to the set-top box to change a channel.

  More information here: problems with watching TV on your computer

   

  Also have a look if you find useful suggestions in this thread.

   

  Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sony Mini DV DCR-TRV18E camcorder to my computer laptop 64 bit Windows 7. The camera is not compatible with this version of Windows.

  I can't connect my Sony Mini DV DCR-TRV18E camcorder to my computer laptop 64 bit Windows 7. The camera is not compatible with this version of Windows. Does this mean that I can't import my old videos? Thank you.

  Yes, this says it's not compatible. So I don't think it'll work in Win7. There a firewire connection? If this is the case you can use it if the laptop has firewire top. All you need is a cable

• I have the windows version of Lightroom 6.2.1 and whenever I try to go to edit in Photoshop, he says "this version of Lightroom needs a Camera Raw version 9.2" my photoshop has only 9.1.1.461 for full compatibility.  But my desktop version of Photoshop wi

  I have the windows version of Lightroom 6.2.1 and whenever I try to go to edit in Photoshop, he says "this version of Lightroom needs a Camera Raw version 9.2" my photoshop has only 9.1.1.461 for full compatibility.  But my desktop version of Photoshop will accept only Camera Raw 9.2.   HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!   Does anyone have an idea on this problem.  Or have I been left in a Catch 22?

  The latest version of Camera Raw compatible with Photoshop CS6 is 9.1. Lightroom is programmed to warn you when you do not have the version of Camera Raw that is fully compatible. But this does not mean that you cannot continue to use Photoshop. Simply choose the option to open a copy which includes Lightroom adjustments. Lightroom will create the TIF or PSD first, and that the file is what will be opened in Photoshop. It will include all the adjustments you have made using Lightroom. Also, on the screen of your messages, you specify to not display this message. Then, you can continue using Lightroom and Photoshop as you are accustomed to using it. At this point, I don't think that there are no changes that are different. I remember correctly, the only changes made in Camera Raw 9.2 were the additions of new cameras.

  In any case, Camera Raw 9.1 is that you can go with Photoshop CS6. If you think that it is necessary for you to have full compatibility, your only option would be to upgrade to the creative cloud. It is really not necessary to do so, however.

• My lenovo came with a counterfeit Windows version

  Seriously, what is the devil?  Lenovo has really give me a counterfeit Windows version?  Just today, I got a notification saying that I have a version of windows that is not genuine, so microsoft ran a few tests and of course: is not true.  I leave for college in a week and a half and I've got MicrosoftOffice... all my itunes songs imported (who took about a download day, all my games installed and running and everything I need to be ready for College, and now his bomb falls on me?

  Why Lenovo give me a computer a copy counterfeit Windows 7 64 bit? (Is there a way to fix this without buying a new version A) and (B) by deleting all of my files that I need?

  Maybe your Windows is not activated. Call Microsoft and activate using the telephone system.

  Best regards.

• 8.5.1 LabVIEW Student Edition - differences between the Mac and Windows versions?

  Hello

  I just bought the student of LabVIEW 8.5.1 version and I use Mac OS X 10.4.11. What are the biggest differences between the Mac and Windows versions, since the box came with a CD of installation of Mac and a Windows DVD Installer?

  See you soon

  Looks like you got the LabVIEW Student Edition Software Suite DVD.

  It comes with 6 boxes to tools, and the TME product, some (or all?) of those who are windows only (at least 8.5), for example:

  • Toolkit Digital Filter Design
  • Modulation Toolkit
  • SignalExpress
  • ...

  Since you have 8.5, you are missing also a few basic things that only recevied at the 8.6MAC support, like Mathscript, Control design and Simulation and native 3D graphics.

• Button 'Back' on the Windows Media Center remote is not recognized by Windows 7

  I am currently using the Windows 7 RC.  I have been for awhile now.  Recently, while trying to use the Hulu app, I noticed that the 'back button ' on my Windows Media Center Remote no longer worked to switch from the full video on the menu.  I contacted the support of Hulu and they guided me to an online tool that shows the output of a button on the remote control.  All other keys work fine, but the 'Back' button doesn't produce any output.  This means that Windows itself is not recognize the key.

  The button works in Windows Media Center, itself, but it does not work when I am in Windows.  It worked fine for the last few months and I had not used for about a month (and reinstalled the RC) and now it no longer works.

  The receiver displays in the form of "eHome Infrared Receiver" Device Manager and when I try to update the drivers it says I have the latest version.  Something seems to be wrong with either the driver or there is a problem in Windows 7 itself which is the cause of not recognizing this key more.

  Well, I tried using the key on the keyboard and which worked to switch between menus.  I accidentally hit the ESC key on the keyboard, which worked to switch between the menu and the video as well.  Out of curosity, I tried a few other buttons on the remote control then and the 'Clear' button, which is down by the pad on the remote works!

  Thanks a lot for your help mark! :-)

• A new version of the parental control is available. We recommend that you update the PC of each Member of the family.

  When I connect to the Windows Live Family Safety website, it shows the opinion (in the title above) recommended that I upgrade to a newer version.  Next to this notice there is a link that says... 'install and set up parental controls'.  When I click on it to try to upgrade to a new version, need me a Windows Essentials page where it says nothing about an update.

  An attempt to update, I clicked on the symbol "Refresh" in the upper right corner of the programs parental control on each of the monitored computers, and all say they are refreshed and updated.  What is going on?  Why he continues to say that they all need new versions?

  PS. I am running Windows XP and control parental version 14.0.8118.0427.

  Hi Placebo12,

  We are happy to assist you with your concern. I understand that you wonder why the message shows up on the Family Safety website.

  The notice comes when it detects an older version of the parental controls installed on your computer. The latest version should be 15.4.3555.0308 for the 2011 version and 16.4.3505.0912 for the 2012 version. Since you're using the 14.0.8118.0427 build that is the 2009 version of the parental control, the site detects it as obsolete. Please note that the only Essentials 2009 version can be installed on Windows XP.

  If in the cases, it affects services and parental control functions, please let us know if we can help you.

  Thank you!

• The preliminary version of remote desktop connection has expired.

  The preliminary version of remote desktop connection has expired.  To download the full version of remote desktop connection, go to Windows Update or contact your system administrator (Please give me the solution for this problem)

  There are several ways you can solve the problem:

  You can copy the files from a Windows XP SP2 computer and then Windows Remote Desktop should work again.
  a. c:\windows\system32\mstscax.dll

  b. mstsc.exe

  Copy the files in safe mode if not just windows will recreate the files even if you replace them or delete them

  Or you can download an update from the Microsoft Download site and it will get your Remote Desktop works again.
  Update for Windows XP (KB969084) - The Remote Desktop Connection 7.0 client update allows you to use the new remote desktop Services features.
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20609

  Please read the known issues in Windows XP from the article above.

  I hope this helps.

• I deleted Windows Defender on Windows Vista and tried to download and reinstall windows Defender but I gat a message that comes up saying that I should not install windows defender, because it came with the computer.

  deleted the windows on windows defender and impossible to reinstall! Message comes out and says that I should not install windows defender, because it came with windows vista. How can I try to fix it when I have windows Defender on my computer?

  You can not delete Defender in Vista.

  It is part of the Vista operating system.

  You can only activate / it:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender

  Many anti-virus have conflict Defender (McAfee, AVG, etc.), and turn it out / conflict with it.

  Microsoft Security Essentials, it turns off because it has its own version.

  See you soon.

  Mick Murphy - Microsoft partner

• Remote Office - error message: version 6 Remote Desktop Connection Client or later is not installed

  Hello

  I am running windows vista home edition at home and I want to connect to my computer at work when I try it I get a message saying that the later version or version 6 Remote Desktop Connection client is not installed, it is not available in vista home? If not what is the best solution for this

  Thank you

  It is based on the operating systems on both ends of the connection.

  Here are some limitations you should consider where they apply: http://windows.microsoft.com/en-US/windows-vista/Connect-to-another-computer-using-Remote-Desktop-Connection.

  Here's how to enable Remote Desktop Connection in Vista: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  Here another article on how to enable the remote desktop connection: http://www.mydigitallife.info/2007/01/26/turn-on-or-enable-remote-desktop-on-windows-vista/comment-page-1/.

  Here's how to work with the desktop client remote: http://www.onecomputerguy.com/networking/vista_remote_desktop_client.htm

  Here's how to add DRC to Home Basic using 3rd party software (if necessary): http://www.pctipsbox.com/add-remote-desktop-access-to-windows-vista-home-editions/.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Internet Explorer 8 and cannot run the AXIS ActiveX camera controls in streaming videos

  While I can't verify this with certainty, it seems that since I upgraded to IE 8, I can run no longer videos using the camera AXIS ActiveX controls.  I get the error: "The AXIS ActiveX Camera Control, which allows to display live image streams in Microsoft Internet Explorer, can not be saved on your computer."  I checked under Tools-> Internet Options-> click the Security tab and then activated or has requested to be invited to everything related to the ActiveX and it does not clear the problem.  Oh and I'm running on XP.

  Thank you.

  Hi nbundy,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP and would be better suited to the XP community. Please visit the link below to find a community that will provide the support you want.

  Forum XP

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect: Remote Desktop control problem

  Original title: remote desktop control problem

  Hello, I am based in Bulgaria and I am trying to connect to the computer of a friend who is in the United Kingdom. He provide me with all the PC name, user name, and password information. I've tried almost everything I find in your site and the forum but still cannot connect and he can't understand where is the problem. I'll be more than happy if you could help me with this Russia.

  Kind regards

  Ivan Karchev

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• How upgrading to the latest version of the parental control

  I have family safety installed 2011. On my summary page, it says "this computer does not have the latest version of the parental control. Install and set up parental controls"how to upgrade to the latest version?

  Hello
  • Windows live family safety are you referring?
  If so, then the question you posted is related to Windows live and will be much better suited in Windows live forums. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=4