BlackBerry Q10 Print for windows 10

I changed to windows 10 and again, I got the problem that printing to go ask do NOT run properly.

-Someone known so its compatible for W10.

S ' there is no special installation for ports

-Which is the implementation of macafee to avoid a block

- Or if any avialble thing to enforce

This was really helpful with windows 7 by removing the KB2992611, now same problem

Print to Go is no longer supported. It was if long links to the announcement are no longer valid.

When this announcement was made by BlackBerry, he advised users to search options from third-party applications.

Tags: BlackBerry Smartphones

Similar Questions

  • C5180: All IN ONE PRINTER FOR WINDOWS 10 UPDATE

    I got a message from HP support updating Windows 10 for my printer.  When I completed the update, screen says that it has failed.  Update was for Windows 8.  I followed troubleshooting without result.  Printer for Windows 10 update is available?

    Contacted HP support line.  Apparently, even if my computer is new, he had a lot of viruses on it, causing it to be lazy, etc.  I paid a tax, the computer cleaned by HP online.  Computer works fine now.  I went back to 8.1 for Microsoft.  He suggested that I wait a few months than 10 has been out a while before trying again 10.  Focus on the upgrade of printer to 10 at the time.

  • Drivers for HP P2035 printer for Windows 7 (64-bit)

    Looking for driver for HP P2035 printer for Windows 7 (64-bit)

    the drivers that come with the printer won't load

    Hello

    Have you tried to download the driver from HP's official website and see if it works? Normally it should work. Here is the link for your printer and the driver for windows 7 64 bit

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3662026&prodTypeId=18972&prodSeriesId=3662025&swLang=8&TaskID=135&swEnvOID=4063

    Hope this solve your problem,

    Kind regards

    Andrew

    Always "vote as helpful" for those who helped and 'mark as answer"If the info helped you in a sort of way. Thank you, Andrew Young - MCTS Windows 7, configuration

  • DeskJet F4580: Compatible printer for Windows 10?

    After you have installed Windows 10 on my PC I noticed that my printer driver is not compatible, so I did some looking on the Microsoft Compatibility Center and they said that it is compatible for Windows 10. I'm going to support HP driver and search Windows 10 driver for my printer and there was a result for the download of PS_AIO_06_B209a-m_140_408 - 5.exe. Means of PS Photosmart but I went ahead and downloaded and as I thought was not for the Deskjet F4580 even HP it clearly lists under him. I guess HP downloaded the wrong driver and I don't know that there is a driver F4580 for Windows 10 there. But my concern was that the driver for the Deskjet F4580 listed is for a different printer.

    Just checked today updates for printer drivers and looks like they downloaded correct. Tested and working. Thank you HP

  • HP Photosmart Plus B209a-m software printing for Windows 8.1

    I recently bought a HP desktop computer preloaded with Windows 8.1.  My printer is a HP B209a-m, but the installation disk will not install on Windows 8.1.  Is there anyway that I can get an installation disc for my HP printer, which apparently only works with Windows 7 and lower?

    spo_1948,

    Click on the below link which will take you your software products download page then you can select your operating system, this printer support WIndows 8.1 and download and install the software.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0003&LC=en&product=3777182&

  • HP LASERJET P1005: HP LASERJET P1005 WILL NOT PRINT FOR WINDOWS UPDATED

    The last 2 times that Windows has updated I got problems printing. The first time, I uninstalled and reinstalled the printer and also led printing HP and the Scan doctor. No one fixed the problem successfully and I ended up back to before the update.

    Now, with a new update, I'm having the same problems. The printer works fine for a couple of jobs and then I get only print error messages.

    Hi @54981 ,

    I see that you encounter printing problems after the update of Windows. I'd love to help you.

    More likely with the update of Windows is to install a new driver for the printer, what causes this problem.

    I would like to remove the updates of Windows on the computer.

    Very probably these two KB2982791, KB2970228 updates are the culprits.

    You may need to do a system restore to get the printer working again.

    I would say to disable automatic updates for Windows, then you can manually go anytime and uncheck that everything related to the printer before performing the updates, so that continue to occur.

    Turn automatic update or disable.

    Manual installation of updates of Windows in Windows 7.

    Feel free to click on the button under the thumbs up if it helps.

    Have a nice weekend!
    Thank you.

  • BlackBerry Smartphones Blackberry USB Drivers for Windows 7

    I have trouble to get the drivers installed for my Blackberry on Windows 7. Windows recognizes it as a blackberry and I can access it for storage, but not via the Desktop Manager. When I try to reinstall or update the drivers, I get the following message:

    What should I do to get the drivers installed?

    I am running:

    Desktop Manager 5.0.0.11

    BlackBerry Curve 8330

    Windows 7 Enterprise (licensed, not beta or beta version)

    A reboot fixed it.

  • Where can I get drivers for my printer for Windows 8 OS iP3300?

    I recently bought a new laptop and it came with the Windows 8 operating system.  I can't find drivers for my iP3300 printer.  Much of what I read insists the drivers for Windows 7 installation in "compatibility" mode should work.  After you follow the instructions to install this way, nothing happened. I need help :)

    Looks like my first answer was a bit premature :(  Unfortunately, the test page was going well, but when I tried to print a Word document with a jpeg it came out weird.  The photo printed several times on the page and in various combinations of colours, shades of blue to shades of yellow!  My printer is in fact a 3300 and I installed the 3600 series I'm sure that's where things went cross-roads.   Can you help me solve this problem?

    Susie

    I would like to buy a new printer that is supported under Windows 8 by its manufacturer.  In view of the possible age of this printer (6 to 7 years possible) and how long the latest drivers were released for it by the manufacturer (March 2010) - it would be cheaper and less frustrating in the long run (and probably in the short term) to buy another cheap, which may equal or faster and perhaps more efficient replacement.

  • Cannot find valid printer URL to add a printer for windows machines

    To make it work fine in linux mint, I had no complaints there.  The problem is that I am installing this on a corporate network with a system operating heterogenious environment.

    Here's what Linux Mint uses to connect to the printer:

    [code]

    HP: / net/Officejet_Pro_8600? ZC = HP28924AB60113

    [/ code]

    Which works very well!  It is fantastic for my work laptop connect to the officejet 8600.  But windows machines are resistant to the installation.  I don't really know how to convert the above link to a url that would include windows.  Does anyone know how to print of the officejet on windows machines?  Windows machines are critical and can not simply be reformatted with Linux.

    Thank you

    1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
    2. click on > start > Control Panel > devices & Printers.
    3. click on add a printer
    4. Select local printer
    5. Select create a new port and select Standard TCP/IP Port, and click Next.
    6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
    7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
    If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
    8. If prompted, use the driver that is currently installed.
    9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
    10. we may ask you to share the printer. Choose No.
    11. the printing area of Test Page is displayed. Go ahead and print it out.
    12. click on finish.

  • Connection to printer for Windows 10

    Recently downloaded Windows 10.  Now my Canon mp160 printer will not work with it and that they do not recognize. I'll have to buy a new printer?

    @George38

    This product is not compatible with the chosen operating system and no drivers will be at disposal. Please consider upgrading your product or operating system to a supported version or model. If you want to update your product, you might like cashback page for promotions and offers on new products. Otherwise, please select a different operating system to see the help available for this product.
  • Driver Epson Stylus Photo 870 Inkjet Printer for Windows 7 on a 64 bit system

    New to Win 7 and 64-bit. I'm looking for a driver for my printer driver inkjet Epson Stylus Photo 870 running Windows 7 on a HP laptop with a 64 bit system. Thanks for any help!

    To find the driver, please see this link:

    http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-820/drivers-support?target=article&Extn=.html&articleid=3529

    Kind regards
    Chauvet J.
  • Printer for Windows 7 64-bit compatibility

    Can someone please help me find a printer/scanner of consumer that are compatible with the Windows 7 64-bit operating system?

    I can't locate the enteprises of printer that supports the 64 bit OS?

    How is that possible? Why would you do this OS and can't stand not with drivers for printers/scanners?

    Very frustrated!

    You have the wrong way about it.

    Choose any multifunction printer you like.  For example, good market 6520 Photosmart e-all-in-one HP printer.

    If you look at the specs--> http://store.hp.com/webapp/wcs/stores/servlet/us/en/pdp/printers/hp-photosmart-6520-e-all-in-one-printer and go to the 'minimum requirements', what you see is

    «Windows 8 and Windows 7: 1 GHz 32-bit (x 86) or (x 64) 64-bit processor

    There is nothing there that says Windows 8 32-bit or 64-bit or Windows 7 32-bit or 64-bit (although the fact that the system can have either a 32 or 64-bit processor might be a clue).

    However, rather than rely on the specs, go to the HP site support part and see what drivers are available--> http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5169041&lc=en&cc=us&dlc=en&lang=en&cc=us

    If you do this, you will see that there are drivers for:

    Windows 7 32 bit

    Windows 7 64 bit

    Windows 8 32-bit

    64-bit Windows 8

    8.1 32-bit Windows

    8.1 Windows 64-bit

    Windows RT

    Windows Vista

    Windows Vista 64-bit

    Windows XP

    Mac OS X 10.10

    Mac OS X 10.6

    Mac OS X 10.7

    Mac OS X 10.8

    Mac OS X 10.9

    In fact, if you actually select one of the Windows versions above, you will see that there is a single download that supports ALL versions of Windows--> h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5169041&lc=en&cc=us&dlc=en&lang=en&cc=us

    The line at the bottom is, watch downloads driver for the printer that you interests rather than the data sheet marketing.  Almost no matter what MFP on the market today will support 32 and 64 bit versions of various editions of Windows.

  • Series of all-in-one HP Photosmart C4500 adaptation of printer for Windows 7 on a new PC

    I just bought a HP Pavilion dv6-3225dx Entertainment PC with Windows 7.  She would not allow the dvd to my printer C4500 download because I don't have Windows XP or Windows Vista.  I checked the HP website for driver downloads and the C4500 is not available, but did not have the C4800 and another (?). Is there something I can download what I'll be able to use my printer C4500 with my new PC?

    You can download the HP herestar driver.

  • How can I add a printer for Windows Virtual PC when using Windows 7?

    I tried the add a printer in XP VM mode section but it cannot see all printers connected to my machine.  Two printers of the drivers are installed in Windows 7 mode.

    I tried to manually add the printer drivers, but that no longer works.

    Hello

    Click on the following link to obtain the necessary information. Hope this helps:

    http://TechNet.Microsoft.com/en-us/library/dd744684 (WS.10) .aspx

    See you soon,.
    Raymond

  • Driver for epson lx400 matrix printer for Windows 7

    I have a matrix printer, how can I get a driver to install on windows 7, so he recognizes her

    Turn on update of the Windows driver and take a look on this site: -.

    http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/1864/3837

    Go to the highest point - how do I install an Inbox driver in Windows 7.

Maybe you are looking for

  • problem with the audio walkman NWZ-E463

    I have a walkman nwz - e463.the problem is whenever I play any video or audio, songs or video works normally but there is no sound.can anyone help with this. ? the volume control is also absent.

  • HP Pavilion dv7 - 6B 63: cadence slow webcam

    Finally got rid of the error CLScan.dll and Cyberlink PowerDVD and Youcam, reloaded Cam works well when I opened Youcam, but oh what a cadence ugly! Maybe 8-10? I guess that's maybe computer, but I've seen better on an old Pentium - at least 15. Any

  • How to manage updates of data in ArrayDataModel

    Hello I load some data from a JSON file in a QVariantList which is then added to an ArrayDataModel that allows to display the data in a ListView. It all works very well. Now, I want to update certain values of a ListViewItem and want to propagate the

  • Telnet issue... What am I doing wrong?

    OK, I have two configuration network to see them via the VPN. The VPN is provided by a 515e and a 501F catalogue. 515e 192.168.50.0 network, the network 501F to the catalog is 192.168.51.0 External ip address of the 515e is x.x.71.7, the 501 is x.x.7

  • "BlackBerry 9000"BOLD"of Smartphones BB unlocked on ATT, get ' java script must be enabled.

    Hi, I'm new on the BB. Everything works wonderfully except: I try video access 1 minute world news on BBC News page. I scroll down to the logo image red world and under this bed logo "Please enable JavaScript. Media requires JavaScript to play. " I h